summaryrefslogtreecommitdiffhomepage
path: root/pkg/sentry/socket
AgeCommit message (Collapse)Author
2020-07-16Add support to return protocol in recvmsg for AF_PACKET.Bhasker Hariharan
Updates #173 PiperOrigin-RevId: 321690756
2020-07-15Fix minor bugs in a couple of interface IOCTLs.Bhasker Hariharan
gVisor incorrectly returns the wrong ARP type for SIOGIFHWADDR. This breaks tcpdump as it tries to interpret the packets incorrectly. Similarly, SIOCETHTOOL is used by tcpdump to query interface properties which fails with an EINVAL since we don't implement it. For now change it to return EOPNOTSUPP to indicate that we don't support the query rather than return EINVAL. NOTE: ARPHRD types for link endpoints are distinct from NIC capabilities and NIC flags. In Linux all 3 exist eg. ARPHRD types are stored in dev->type field while NIC capabilities are more like the device features which can be queried using SIOCETHTOOL but not modified and NIC Flags are fields that can be modified from user space. eg. NIC status (UP/DOWN/MULTICAST/BROADCAST) etc. Updates #2746 PiperOrigin-RevId: 321436525
2020-07-15hostinet: fix fd leak in fdnotifier for VFS2Tiwei Bie
When we failed to create the new socket after adding the fd to fdnotifier, we should remove the fd from fdnotifier, because we are going to close the fd directly. Fixes: #3241 Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
2020-07-11Stub out SO_DETACH_FILTER.Bhasker Hariharan
Updates #2746 PiperOrigin-RevId: 320757963
2020-07-09Discard multicast UDP source address.gVisor bot
RFC-1122 (and others) specify that UDP should not receive datagrams that have a source address that is a multicast address. Packets should never be received FROM a multicast address. See also, RFC 768: 'User Datagram Protocol' J. Postel, ISI, 28 August 1980 A UDP datagram received with an invalid IP source address (e.g., a broadcast or multicast address) must be discarded by UDP or by the IP layer (see rfc 1122 Section 3.2.1.3). This CL does not address TCP or broadcast which is more complicated. Also adds a test for both ipv6 and ipv4 UDP. Fixes #3154 PiperOrigin-RevId: 320547674
2020-07-09Add support for IP_HDRINCL IP option for raw sockets.Bhasker Hariharan
Updates #2746 Fixes #3158 PiperOrigin-RevId: 320497190
2020-07-01Port fallocate to VFS2.Zach Koopmans
PiperOrigin-RevId: 319283715
2020-06-26Implement SO_NO_CHECK socket option.gVisor bot
SO_NO_CHECK is used to skip the UDP checksum generation on a TX socket (UDP checksum is optional on IPv4). Test: - TestNoChecksum - SoNoCheckOffByDefault (UdpSocketTest) - SoNoCheck (UdpSocketTest) Fixes #3055 PiperOrigin-RevId: 318575215
2020-06-25conntrack refactor, no behavior changesKevin Krakauer
- Split connTrackForPacket into 2 functions instead of switching on flag - Replace hash with struct keys. - Remove prefixes where possible - Remove unused connStatus, timeout - Flatten ConnTrack struct a bit - some intermediate structs had no meaning outside of the context of their parent. - Protect conn.tcb with a mutex - Remove redundant error checking (e.g. when is pkt.NetworkHeader valid) - Clarify that HandlePacket and CreateConnFor are the expected entrypoints for ConnTrack PiperOrigin-RevId: 318407168
2020-06-24Add support for Stack level options.Bhasker Hariharan
Linux controls socket send/receive buffers using a few sysctl variables - net.core.rmem_default - net.core.rmem_max - net.core.wmem_max - net.core.wmem_default - net.ipv4.tcp_rmem - net.ipv4.tcp_wmem The first 4 control the default socket buffer sizes for all sockets raw/packet/tcp/udp and also the maximum permitted socket buffer that can be specified in setsockopt(SOL_SOCKET, SO_(RCV|SND)BUF,...). The last two control the TCP auto-tuning limits and override the default specified in rmem_default/wmem_default as well as the max limits. Netstack today only implements tcp_rmem/tcp_wmem and incorrectly uses it to limit the maximum size in setsockopt() as well as uses it for raw/udp sockets. This changelist introduces the other 4 and updates the udp/raw sockets to use the newly introduced variables. The values for min/max match the current tcp_rmem/wmem values and the default value buffers for UDP/RAW sockets is updated to match the linux value of 212KiB up from the really low current value of 32 KiB. Updates #3043 Fixes #3043 PiperOrigin-RevId: 318089805
2020-06-19Implement UDP cheksum verification.gVisor bot
Test: - TestIncrementChecksumErrors Fixes #2943 PiperOrigin-RevId: 317348158
2020-06-18socket/unix: (*connectionedEndpoint).State() has to take the endpoint lockAndrei Vagin
It accesses e.receiver which is protected by the endpoint lock. WARNING: DATA RACE Write at 0x00c0006aa2b8 by goroutine 189: pkg/sentry/socket/unix/transport.(*connectionedEndpoint).Connect.func1() pkg/sentry/socket/unix/transport/connectioned.go:359 +0x50 pkg/sentry/socket/unix/transport.(*connectionedEndpoint).BidirectionalConnect() pkg/sentry/socket/unix/transport/connectioned.go:327 +0xa3c pkg/sentry/socket/unix/transport.(*connectionedEndpoint).Connect() pkg/sentry/socket/unix/transport/connectioned.go:363 +0xca pkg/sentry/socket/unix.(*socketOpsCommon).Connect() pkg/sentry/socket/unix/unix.go:420 +0x13a pkg/sentry/socket/unix.(*SocketOperations).Connect() <autogenerated>:1 +0x78 pkg/sentry/syscalls/linux.Connect() pkg/sentry/syscalls/linux/sys_socket.go:286 +0x251 Previous read at 0x00c0006aa2b8 by goroutine 270: pkg/sentry/socket/unix/transport.(*baseEndpoint).Connected() pkg/sentry/socket/unix/transport/unix.go:789 +0x42 pkg/sentry/socket/unix/transport.(*connectionedEndpoint).State() pkg/sentry/socket/unix/transport/connectioned.go:479 +0x2f pkg/sentry/socket/unix.(*socketOpsCommon).State() pkg/sentry/socket/unix/unix.go:714 +0xc3e pkg/sentry/socket/unix.(*socketOpsCommon).SendMsg() pkg/sentry/socket/unix/unix.go:466 +0xc44 pkg/sentry/socket/unix.(*SocketOperations).SendMsg() <autogenerated>:1 +0x173 pkg/sentry/syscalls/linux.sendTo() pkg/sentry/syscalls/linux/sys_socket.go:1121 +0x4c5 pkg/sentry/syscalls/linux.SendTo() pkg/sentry/syscalls/linux/sys_socket.go:1134 +0x87 Reported-by: syzbot+c2be37eedc672ed59a86@syzkaller.appspotmail.com PiperOrigin-RevId: 317236996
2020-06-18iptables: remove metadata structKevin Krakauer
Metadata was useful for debugging and safety, but enough tests exist that we should see failures when (de)serialization is broken. It made stack initialization more cumbersome and it's also getting in the way of ip6tables. PiperOrigin-RevId: 317210653
2020-06-18Remove various uses of 'whitelist'Michael Pratt
Updates #2972 PiperOrigin-RevId: 317113059
2020-06-18Support setsockopt SO_SNDBUF/SO_RCVBUF for raw/udp sockets.Bhasker Hariharan
Updates #173,#6 Fixes #2888 PiperOrigin-RevId: 317087652
2020-06-17Implement POSIX locksFabricio Voznika
- Change FileDescriptionImpl Lock/UnlockPOSIX signature to take {start,length,whence}, so the correct offset can be calculated in the implementations. - Create PosixLocker interface to make it possible to share the same locking code from different implementations. Closes #1480 PiperOrigin-RevId: 316910286
2020-06-10{S,G}etsockopt for TCP_KEEPCNT option.Nayana Bidari
TCP_KEEPCNT is used to set the maximum keepalive probes to be sent before dropping the connection. WANT_LGTM=jchacon PiperOrigin-RevId: 315758094
2020-06-10socket/unix: handle sendto address argument for connected socketsAndrei Vagin
In case of SOCK_SEQPACKET, it has to be ignored. In case of SOCK_STREAM, EISCONN or EOPNOTSUPP has to be returned. PiperOrigin-RevId: 315755972
2020-06-09Implement flock(2) in VFS2Fabricio Voznika
LockFD is the generic implementation that can be embedded in FileDescriptionImpl implementations. Unique lock ID is maintained in vfs.FileDescription and is created on demand. Updates #1480 PiperOrigin-RevId: 315604825
2020-06-07netstack: parse incoming packet headers up-frontKevin Krakauer
Netstack has traditionally parsed headers on-demand as a packet moves up the stack. This is conceptually simple and convenient, but incompatible with iptables, where headers can be inspected and mangled before even a routing decision is made. This changes header parsing to happen early in the incoming packet path, as soon as the NIC gets the packet from a link endpoint. Even if an invalid packet is found (e.g. a TCP header of insufficient length), the packet is passed up the stack for proper stats bookkeeping. PiperOrigin-RevId: 315179302
2020-06-05Fix error code returned due to Port exhaustion.Bhasker Hariharan
For TCP sockets gVisor incorrectly returns EAGAIN when no ephemeral ports are available to bind during a connect. Linux returns EADDRNOTAVAIL. This change fixes gVisor to return the correct code and adds a test for the same. This change also fixes a minor bug for ping sockets where connect() would fail with EINVAL unless the socket was bound first. Also added tests for testing UDP Port exhaustion and Ping socket port exhaustion. PiperOrigin-RevId: 314988525
2020-06-05Fix copylocks error about copying IPTables.Ting-Yu Wang
IPTables.connections contains a sync.RWMutex. Copying it will trigger copylocks analysis. Tested by manually enabling nogo tests. sync.RWMutex is added to IPTables for the additional race condition discovered. PiperOrigin-RevId: 314817019
2020-06-03Pass PacketBuffer as pointer.Ting-Yu Wang
Historically we've been passing PacketBuffer by shallow copying through out the stack. Right now, this is only correct as the caller would not use PacketBuffer after passing into the next layer in netstack. With new buffer management effort in gVisor/netstack, PacketBuffer will own a Buffer (to be added). Internally, both PacketBuffer and Buffer may have pointers and shallow copying shouldn't be used. Updates #2404. PiperOrigin-RevId: 314610879
2020-06-02Check that two sockets with different types can't be connected to each otherAndrei Vagin
PiperOrigin-RevId: 314450191
2020-05-28Enable iptables source filtering (-s/--source)Kevin Krakauer
2020-05-19Fix flaky udp tests by polling before reading.Dean Deng
On native Linux, calling recv/read right after send/write sometimes returns EWOULDBLOCK, if the data has not made it to the receiving socket (even though the endpoints are on the same host). Poll before reading to avoid this. Making this change also uncovered a hostinet bug (gvisor.dev/issue/2726), which is noted in this CL. PiperOrigin-RevId: 312320587
2020-05-15Minor formatting updates for gvisor.dev.Adin Scannell
* Aggregate architecture Overview in "What is gVisor?" as it makes more sense in one place. * Drop "user-space kernel" and use "application kernel". The term "user-space kernel" is confusing when some platform implementation do not run in user-space (instead running in guest ring zero). * Clear up the relationship between the Platform page in the user guide and the Platform page in the architecture guide, and ensure they are cross-linked. * Restore the call-to-action quick start link in the main page, and drop the GitHub link (which also appears in the top-right). * Improve image formatting by centering all doc and blog images, and move the image captions to the alt text. PiperOrigin-RevId: 311845158
2020-05-13Stub support for TCP_SYNCNT and TCP_WINDOW_CLAMP.Bhasker Hariharan
This change adds support for TCP_SYNCNT and TCP_WINDOW_CLAMP options in GetSockOpt/SetSockOpt. This change does not really change any behaviour in Netstack and only stores/returns the stored value. Actual honoring of these options will be added as required. Fixes #2626, #2625 PiperOrigin-RevId: 311453777
2020-05-12Merge pull request #2678 from nybidari:iptablesgVisor bot
PiperOrigin-RevId: 311203776
2020-05-12Merge pull request #2671 from kevinGC:skip-outputgVisor bot
PiperOrigin-RevId: 311181084
2020-05-12Don't call kernel.Task.Block() from netstack.SocketOperations.Write().Jamie Liu
kernel.Task.Block() requires that the caller is running on the task goroutine. netstack.SocketOperations.Write() uses kernel.TaskFromContext() to call kernel.Task.Block() even if it's not running on the task goroutine. Stop doing that. PiperOrigin-RevId: 311178335
2020-05-12iptables: support gid match for owner matching.Nayana Bidari
- Added support for matching gid owner and invert flag for uid and gid. $ iptables -A OUTPUT -p tcp -m owner --gid-owner root -j ACCEPT $ iptables -A OUTPUT -p tcp -m owner ! --uid-owner root -j ACCEPT $ iptables -A OUTPUT -p tcp -m owner ! --gid-owner root -j DROP - Added tests for uid, gid and invert flags.
2020-05-11iptables: check for truly unconditional rulesKevin Krakauer
We weren't properly checking whether the inserted default rule was unconditional.
2020-05-08iptables - filter packets using outgoing interface.gVisor bot
Enables commands with -o (--out-interface) for iptables rules. $ iptables -A OUTPUT -o eth0 -j ACCEPT PiperOrigin-RevId: 310642286
2020-05-07Allocate device numbers for VFS2 filesystems.Jamie Liu
Updates #1197, #1198, #1672 PiperOrigin-RevId: 310432006
2020-05-05Update vfs2 socket TODOs.Dean Deng
Three updates: - Mark all vfs2 socket syscalls as supported. - Use the same dev number and ino number generator for all types of sockets, unlike in VFS1. - Do not use host fd for hostinet metadata. Fixes #1476, #1478, #1484, 1485, #2017. PiperOrigin-RevId: 309994579
2020-05-01Support for connection tracking of TCP packets.Nayana Bidari
Connection tracking is used to track packets in prerouting and output hooks of iptables. The NAT rules modify the tuples in connections. The connection tracking code modifies the packets by looking at the modified tuples.
2020-05-01Automated rollback of changelist 308674219Kevin Krakauer
PiperOrigin-RevId: 309491861
2020-05-01Port netstack, hostinet, and netlink sockets to VFS2.Dean Deng
All three follow the same pattern: 1. Refactor VFS1 sockets into socketOpsCommon, so that most of the methods can be shared with VFS2. 2. Create a FileDescriptionImpl with the corresponding socket operations, rewriting the few that cannot be shared with VFS1. 3. Set up a VFS2 socket provider that creates a socket by setting up a dentry in the global Kernel.socketMount and connecting it with a new FileDescription. This mostly completes the work for porting sockets to VFS2, and many syscall tests can be enabled as a result. There are several networking-related syscall tests that are still not passing: 1. net gofer tests 2. socketpair gofer tests 2. sendfile tests (splice is not implemented in VFS2 yet) Updates #1478, #1484, #1485 PiperOrigin-RevId: 309457331
2020-04-29iptables: don't pollute logsKevin Krakauer
The netfilter package uses logs to make debugging the (de)serialization of structs easier. This generates a lot of (usually irrelevant) logs. Logging is now hidden behind a debug flag. PiperOrigin-RevId: 309087115
2020-04-28Fix Unix socket permissions.Dean Deng
Enforce write permission checks in BoundEndpointAt, which corresponds to the permission checks in Linux (net/unix/af_unix.c:unix_find_other). Also, create bound socket files with the correct permissions in VFS2. Fixes #2324. PiperOrigin-RevId: 308949084
2020-04-28Deduplicate unix socket Release() method.Dean Deng
PiperOrigin-RevId: 308932254
2020-04-28Support pipes and sockets in VFS2 gofer fs.Dean Deng
Named pipes and sockets can be represented in two ways in gofer fs: 1. As a file on the remote filesystem. In this case, all file operations are passed through 9p. 2. As a synthetic file that is internal to the sandbox. In this case, the dentry stores an endpoint or VFSPipe for sockets and pipes respectively, which replaces interactions with the remote fs through the gofer. In gofer.filesystem.MknodAt, we attempt to call mknod(2) through 9p, and if it fails, fall back to the synthetic version. Updates #1200. PiperOrigin-RevId: 308828161
2020-04-27Import host sockets.Dean Deng
The FileDescription implementation for hostfs sockets uses the standard Unix socket implementation (unix.SocketVFS2), but is also tied to a hostfs dentry. Updates #1672, #1476 PiperOrigin-RevId: 308716426
2020-04-27Automated rollback of changelist 308163542gVisor bot
PiperOrigin-RevId: 308674219
2020-04-24Port SCM Rights to VFS2.Dean Deng
Fixes #1477. PiperOrigin-RevId: 308317511
2020-04-23Remove View.First() and View.RemoveFirst()Kevin Krakauer
These methods let users eaily break the VectorisedView abstraction, and allowed netstack to slip into pseudo-enforcement of the "all headers are in the first View" invariant. Removing them and replacing with PullUp(n) breaks this reliance and will make it easier to add iptables support and rework network buffer management. The new View.PullUp(n) method is low cost in the common case, when when all the headers fit in the first View. PiperOrigin-RevId: 308163542
2020-04-21Sentry metrics updates.Dave Bailey
Sentry metrics with nanoseconds units are labeled as such, and non-cumulative sentry metrics are supported. PiperOrigin-RevId: 307621080
2020-04-21Automated rollback of changelist 307477185gVisor bot
PiperOrigin-RevId: 307598974
2020-04-17Remove View.First() and View.RemoveFirst()Kevin Krakauer
These methods let users eaily break the VectorisedView abstraction, and allowed netstack to slip into pseudo-enforcement of the "all headers are in the first View" invariant. Removing them and replacing with PullUp(n) breaks this reliance and will make it easier to add iptables support and rework network buffer management. The new View.PullUp(n) method is low cost in the common case, when when all the headers fit in the first View.
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-29 01:08:06 +0000