summaryrefslogtreecommitdiffhomepage
path: root/pkg/sentry/socket/rpcinet
AgeCommit message (Collapse)Author
2019-09-23internal BUILD file cleanup.gVisor bot
PiperOrigin-RevId: 270680704
2019-08-08Return a well-defined socket address type from socket funtions.Rahat Mahmood
Previously we were representing socket addresses as an interface{}, which allowed any type which could be binary.Marshal()ed to be used as a socket address. This is fine when the address is passed to userspace via the linux ABI, but is problematic when used from within the sentry such as by networking procfs files. PiperOrigin-RevId: 262460640
2019-08-08netstack: Don't start endpoint goroutines too soon on restore.Rahat Mahmood
Endpoint protocol goroutines were previously started as part of loading the endpoint. This is potentially too soon, as resources used by these goroutine may not have been loaded. Protocol goroutines may perform meaningful work as soon as they're started (ex: incoming connect) which can cause them to indirectly access resources that haven't been loaded yet. This CL defers resuming all protocol goroutines until the end of restore. PiperOrigin-RevId: 262409429
2019-08-08Merge pull request #653 from xiaobo55x:devgVisor bot
PiperOrigin-RevId: 262402929
2019-08-05Change syscall.EPOLLET to unix.EPOLLETHaibo Xu
syscall.EPOLLET has been defined with different values on amd64 and arm64(-0x80000000 on amd64, and 0x80000000 on arm64), while unix.EPOLLET has been unified this value to 0x80000000(golang/go#5328). ref #63 Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: Id97d075c4e79d86a2ea3227ffbef02d8b00ffbb8
2019-08-02Plumbing for iptables sockopts.Kevin Krakauer
PiperOrigin-RevId: 261413396
2019-07-31Basic support for 'ip route'Ian Lewis
Implements support for RTM_GETROUTE requests for netlink sockets. Fixes #507 PiperOrigin-RevId: 261051045
2019-07-15Support /proc/net/devJianfeng Tan
This proc file reports the stats of interfaces. We could use ifconfig command to check the result. Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com> Change-Id: Ia7c1e637f5c76c30791ffda68ee61e861b6ef827 COPYBARA_INTEGRATE_REVIEW=https://gvisor-review.googlesource.com/c/gvisor/+/18282/ PiperOrigin-RevId: 258303936
2019-07-02Remove map from fd_map, change to fd_table.Adin Scannell
This renames FDMap to FDTable and drops the kernel.FD type, which had an entire package to itself and didn't serve much use (it was freely cast between types, and served as more of an annoyance than providing any protection.) Based on BenchmarkFDLookupAndDecRef-12, we can expect 5-10 ns per lookup operation, and 10-15 ns per concurrent lookup operation of savings. This also fixes two tangential usage issues with the FDMap. Namely, non-atomic use of NewFDFrom and associated calls to Remove (that are both racy and fail to drop the reference on the underlying file.) PiperOrigin-RevId: 256285890
2019-06-27Complete pipe support on overlayfsFabricio Voznika
Get/Set pipe size and ioctl support were missing from overlayfs. It required moving the pipe.Sizer interface to fs so that overlay could get access. Fixes #318 PiperOrigin-RevId: 255511125
2019-06-18gvisor/fs: don't update file.offset for sockets, pipes, etcAndrei Vagin
sockets, pipes and other non-seekable file descriptors don't use file.offset, so we don't need to update it. With this change, we will be able to call file operations without locking the file.mu mutex. This is already used for pipes in the splice system call. PiperOrigin-RevId: 253746644
2019-06-13Update canonical repository.Adin Scannell
This can be merged after: https://github.com/google/gvisor-website/pull/77 or https://github.com/google/gvisor-website/pull/78 PiperOrigin-RevId: 253132620
2019-06-10Store more information in the kernel socket table.Rahat Mahmood
Store enough information in the kernel socket table to distinguish between different types of sockets. Previously we were only storing the socket family, but this isn't enough to classify sockets. For example, TCPv4 and UDPv4 sockets are both AF_INET, and ICMP sockets are SOCK_DGRAM sockets with a particular protocol. Instead of creating more sub-tables, flatten the socket table and provide a filtering mechanism based on the socket entry. Also generate and store a socket entry index ("sl" in linux) which allows us to output entries in a stable order from procfs. PiperOrigin-RevId: 252495895
2019-06-06Use common definition of SockType.Rahat Mahmood
SockType isn't specific to unix domain sockets, and the current definition basically mirrors the linux ABI's definition. PiperOrigin-RevId: 251956740
2019-06-06Track and export socket state.Rahat Mahmood
This is necessary for implementing network diagnostic interfaces like /proc/net/{tcp,udp,unix} and sock_diag(7). For pass-through endpoints such as hostinet, we obtain the socket state from the backend. For netstack, we add explicit tracking of TCP states. PiperOrigin-RevId: 251934850
2019-05-21Add basic plumbing for splice and stub implementation.Adin Scannell
This does not actually implement an efficient splice or sendfile. Rather, it adds a generic plumbing to the file internals so that this can be added. All file implementations use the stub fileutil.NoSplice implementation, which causes sendfile and splice to fall back to an internal copy. A basic splice system call interface is added, along with a test. PiperOrigin-RevId: 249335960 Change-Id: Ic5568be2af0a505c19e7aec66d5af2480ab0939b
2019-04-29Change copyright notice to "The gVisor Authors"Michael Pratt
Based on the guidelines at https://opensource.google.com/docs/releasing/authors/. 1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./' 2. Manual fixup of "Google Inc" references. 3. Add AUTHORS file. Authors may request to be added to this file. 4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS. Fixes #209 PiperOrigin-RevId: 245823212 Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
2019-04-29Allow and document bug ids in gVisor codebase.Nicolas Lacasse
PiperOrigin-RevId: 245818639 Change-Id: I03703ef0fb9b6675955637b9fe2776204c545789
2019-04-19Add support for the MSG_TRUNC msghdr flag.Ian Gudger
The MSG_TRUNC flag is set in the msghdr when a message is truncated. Fixes google/gvisor#200 PiperOrigin-RevId: 244440486 Change-Id: I03c7d5e7f5935c0c6b8d69b012db1780ac5b8456
2019-04-17Convert poll/select to operate more directly on linux.PollFDMichael Pratt
Current, doPoll copies the user struct pollfd array into a []syscalls.PollFD, which contains internal kdefs.FD and waiter.EventMask types. While these are currently binary-compatible with the Linux versions, we generally discourage copying directly to internal types (someone may inadvertantly change kdefs.FD to uint64). Instead, copy directly to a []linux.PollFD, which will certainly be binary compatible. Most of syscalls/polling.go is included directly into syscalls/linux/sys_poll.go, as it can then operate directly on linux.PollFD. The additional syscalls.PollFD type is providing little value. I've also added explicit conversion functions for waiter.EventMask, which creates the possibility of a different binary format. PiperOrigin-RevId: 244042947 Change-Id: I24e5b642002a32b3afb95a9dcb80d4acd1288abf
2019-04-11Use open fids when fstat()ing gofer files.Jamie Liu
PiperOrigin-RevId: 243018347 Change-Id: I1e5b80607c1df0747482abea61db7fcf24536d37
2019-03-20Record sockets created during accept(2) for all families.Rahat Mahmood
Track new sockets created during accept(2) in the socket table for all families. Previously we were only doing this for unix domain sockets. PiperOrigin-RevId: 239475550 Change-Id: I16f009f24a06245bfd1d72ffd2175200f837c6ac
2019-01-31Remove license commentsMichael Pratt
Nothing reads them and they can simply get stale. Generated with: $ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD PiperOrigin-RevId: 231818945 Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0
2019-01-14Remove fs.Handle, ramfs.Entry, and all the DeprecatedFileOperations.Nicolas Lacasse
More helper structs have been added to the fsutil package to make it easier to implement fs.InodeOperations and fs.FileOperations. PiperOrigin-RevId: 229305982 Change-Id: Ib6f8d3862f4216745116857913dbfa351530223b
2018-12-28Implement SO_REUSEPORT for TCP and UDP socketsAndrei Vagin
This option allows multiple sockets to be bound to the same port. Incoming packets are distributed to sockets using a hash based on source and destination addresses. This means that all packets from one sender will be received by the same server socket. PiperOrigin-RevId: 227153413 Change-Id: I59b6edda9c2209d5b8968671e9129adb675920cf
2018-12-14Implement SO_SNDTIMEOIan Gudger
PiperOrigin-RevId: 225620490 Change-Id: Ia726107b3f58093a5f881634f90b071b32d2c269
2018-12-04Partial writes should loop in rpcinet.Brian Geffon
FileOperations.Write should return ErrWouldBlock to allow the upper layer to loop and sendmsg should continue writing where it left off on a partial write. PiperOrigin-RevId: 224081631 Change-Id: Ic61f6943ea6b7abbd82e4279decea215347eac48
2018-11-27Save shutdown flags first.Brian Geffon
With rpcinet if shutdown flags are not saved before making the rpc a race is possible where blocked threads are woken up before the flags have been persisted. This would mean that threads can block indefinitely in a recvmsg after a shutdown(SHUT_RD) has happened. PiperOrigin-RevId: 223089783 Change-Id: If595e7add12aece54bcdf668ab64c570910d061a
2018-10-23Track paths and provide a rename hook.Adin Scannell
This change also adds extensive testing to the p9 package via mocks. The sanity checks and type checks are moved from the gofer into the core package, where they can be more easily validated. PiperOrigin-RevId: 218296768 Change-Id: I4fc3c326e7bf1e0e140a454cbacbcc6fd617ab55
2018-10-20Add more unimplemented syscall eventsFabricio Voznika
Added events for *ctl syscalls that may have multiple different commands. For runsc, each syscall event is only logged once. For *ctl syscalls, use the cmd as identifier, not only the syscall number. PiperOrigin-RevId: 218015941 Change-Id: Ie3c19131ae36124861e9b492a7dbe1765d9e5e59
2018-10-19Use correct company name in copyright headerIan Gudger
PiperOrigin-RevId: 217951017 Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
2018-10-17Move Unix transport out of netstackIan Gudger
PiperOrigin-RevId: 217557656 Change-Id: I63d27635b1a6c12877279995d2d9847b6a19da9b
2018-07-27stateify: support explicit annotation mode; convert refs and stack packages.Zhaozhong Ni
We have been unnecessarily creating too many savable types implicitly. PiperOrigin-RevId: 206334201 Change-Id: Idc5a3a14bfb7ee125c4f2bb2b1c53164e46f29a8
2018-06-22Add rpcinet support for SIOCGIFCONF.Brian Geffon
The interfaces and their addresses are already available via the stack Intefaces and InterfaceAddrs. Also add some tests as we had no tests around SIOCGIFCONF. I also added the socket_netgofer lifecycle for IOCTL tests. PiperOrigin-RevId: 201744863 Change-Id: Ie0a285a2a2f859fa0cafada13201d5941b95499a
2018-06-19Rpcinet is racy around shutdown flags.Brian Geffon
Correct a data race in rpcinet where a shutdown and recvmsg can race around shutown flags. PiperOrigin-RevId: 201238366 Change-Id: I5eb06df4a2b4eba331eeb5de19076213081d581f
2018-06-19Rpcinet needs to track shutdown state for blocking sockets.Brian Geffon
Because rpcinet will emulate a blocking socket backed by an rpc based non-blocking socket. In the event of a shutdown(SHUT_RD) followed by a read a non-blocking socket is allowed to return an EWOULDBLOCK however since a blocking socket knows it cannot receive anymore data it would block indefinitely and in this situation linux returns 0. We have to track this on the rpcinet sentry side so we can emulate that behavior because the remote side has no way to know if the socket is actually blocking within the sentry. PiperOrigin-RevId: 201201618 Change-Id: I4ac3a7b74b5dae471ab97c2e7d33b83f425aedac
2018-06-17Add rpcinet support for control messages.Brian Geffon
Add support for control messages, but at this time the only control message that the sentry will support here is SO_TIMESTAMP. PiperOrigin-RevId: 200922230 Change-Id: I63a852d9305255625d9df1d989bd46a66e93c446
2018-06-13Fix missing returns in rpcinet.Brian Geffon
PiperOrigin-RevId: 200472634 Change-Id: I3f0fb9e3b2f8616e6aa1569188258f330bf1ed31
2018-06-12Rpcinet doensn't handle SO_RCVTIMEO properly.Brian Geffon
Rpcinet already inherits socket.ReceiveTimeout; however, it's never set on setsockopt(2). The value is currently forwarded as an RPC and ignored as all sockets will be non-blocking on the RPC side. PiperOrigin-RevId: 200299260 Change-Id: I6c610ea22c808ff6420c63759dccfaeab17959dd
2018-06-11Rpcinet is incorrectly handling MSG_TRUNC with SOCK_STREAMBrian Geffon
SOCK_STREAM has special behavior with respect to MSG_TRUNC. Specifically, the data isn't actually copied back out to userspace when MSG_TRUNC is provided on a SOCK_STREAM. According to tcp(7): "Since version 2.4, Linux supports the use of MSG_TRUNC in the flags argument of recv(2) (and recvmsg(2)). This flag causes the received bytes of data to be discarded, rather than passed back in a caller-supplied buffer." PiperOrigin-RevId: 200134860 Change-Id: I70f17a5f60ffe7794c3f0cfafd131c069202e90d
2018-06-11rpcinet is treating EAGAIN and EWOULDBLOCK as different errnos.Brian Geffon
PiperOrigin-RevId: 200124614 Change-Id: I38a7b083f1464a2a586fe24db648e624c455fec5
2018-06-08Add checks for short CopyOut in rpcinetBrian Geffon
PiperOrigin-RevId: 199864753 Change-Id: Ibace6a1fdf99ee6ce368ac12c390aa8a02dbdfb7
2018-06-08rpcinet is not correctly handling MSG_TRUNC on recvmsg(2).Brian Geffon
MSG_TRUNC can cause recvmsg(2) to return a value larger than the buffer size. In this situation it's an indication that the buffer was completely filled and that the msg was truncated. Previously in rpcinet we were returning the buffer size but we should actually be returning the payload length as returned by the syscall. PiperOrigin-RevId: 199814221 Change-Id: If09aa364219c1bf193603896fcc0dc5c55e85d21
2018-06-07rpcinet should not block in read(2) rpcs.Brian Geffon
PiperOrigin-RevId: 199703609 Change-Id: I8153b0396b22a230a68d4b69c46652a5545f7630
2018-06-07Add missing rpcinet ioctls.Brian Geffon
PiperOrigin-RevId: 199669120 Change-Id: I0be88cdbba29760f967e9a5bb4144ca62c1ed7aa
2018-06-06Add support for rpcinet ioctl(2).Brian Geffon
This change will add support for ioctls that have previously been supported by netstack. LINE_LENGTH_IGNORE PiperOrigin-RevId: 199544114 Change-Id: I3769202c19502c3b7d05e06ea9552acfd9255893
2018-06-05Add support for rpcinet owned procfs files.Brian Geffon
This change will add support for /proc/sys/net and /proc/net which will be managed and owned by rpcinet. This will allow these inodes to be forward as rpcs. PiperOrigin-RevId: 199370799 Change-Id: I2c876005d98fe55dd126145163bee5a645458ce4
2018-06-01Fix refcount bug in rpcinet socketOperations.Accept.Brian Geffon
PiperOrigin-RevId: 198931222 Change-Id: I69ee12318e87b9a6a4a94b18a9bf0ae4e39d7eaf
2018-05-24rpcinet connect doesn't handle all errnos correctly.Brian Geffon
These were causing non-blocking related errnos to be returned to the sentry when they were created as blocking FDs internally. PiperOrigin-RevId: 197962932 Change-Id: I3f843535ff87ebf4cb5827e9f3d26abfb79461b0
2018-05-16Fix another socket Dirent refcount.Christopher Koch
PiperOrigin-RevId: 196893452 Change-Id: I5ea0f851fcabc5eac5859e61f15213323d996337
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-02 15:27:30 +0000