Age | Commit message (Collapse) | Author |
|
Fixes the behaviour of SO_ERROR for tcp sockets where in linux it returns
sk->sk_err and if sk->sk_err is 0 then it returns sk->sk_soft_err. In gVisor TCP
we endpoint.HardError is the equivalent of sk->sk_err and endpoint.LastError
holds soft errors. This change brings this into alignment with Linux such that
both hard/soft errors are cleared when retrieved using getsockopt(.. SO_ERROR)
is called on a socket.
Fixes #3812
PiperOrigin-RevId: 342868552
|
|
Store all the socket level options in a struct and call {Get/Set}SockOpt on
this struct. This will avoid implementing socket level options on all
endpoints. This CL contains implementing one socket level option for tcp and
udp endpoints.
PiperOrigin-RevId: 342203981
|
|
Updates #3921
PiperOrigin-RevId: 339195417
|
|
Inode number consistency checks are now skipped in save/restore tests for
reasons described in greatest detail in StatTest.StateDoesntChangeAfterRename.
They pass in VFS1 due to the bug described in new test case
SimpleStatTest.DifferentFilesHaveDifferentDeviceInodeNumberPairs.
Fixes #1663
PiperOrigin-RevId: 338776148
|
|
Added the following fields in kernfs.InodeAttr:
- blockSize
- atime
- mtime
- ctime
Also resolved all TODOs for #1193.
Fixes #1193
PiperOrigin-RevId: 338714527
|
|
The SO_ACCEPTCONN option is used only on getsockopt(). When this option is
specified, getsockopt() indicates whether socket listening is enabled for
the socket. A value of zero indicates that socket listening is disabled;
non-zero that it is enabled.
PiperOrigin-RevId: 338703206
|
|
Reported-by: syzbot+5466463b7604c2902875@syzkaller.appspotmail.com
PiperOrigin-RevId: 337451896
|
|
Adds support for the IPv6-compatible redirect target. Redirection is a limited
form of DNAT, where the destination is always the localhost.
Updates #3549.
PiperOrigin-RevId: 334698344
|
|
As per relevant IP RFCS (see code comments), broadcast (for IPv4) and
multicast addresses are not allowed. Currently checks for these are
done at the transport layer, but since it is explicitly forbidden at
the IP layers, check for them there.
This change also removes the UDP.InvalidSourceAddress stat since there
is no longer a need for it.
Test: ip_test.TestSourceAddressValidation
PiperOrigin-RevId: 334490971
|
|
Like matchers, targets should use a module-like register/lookup system. This
replaces the brittle switch statements we had before.
The only behavior change is supporing IPT_GET_REVISION_TARGET. This makes it
much easier to add IPv6 redirect in the next change.
Updates #3549.
PiperOrigin-RevId: 334469418
|
|
VFS2 socket record is not removed from the system-wide
socket table when the socket is released, which will lead
to a memory leak. This patch fixes this issue.
Fixes: #3874
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
|
|
PiperOrigin-RevId: 332760843
|
|
PiperOrigin-RevId: 332486383
|
|
SO_LINGER is a socket level option and should be stored on all endpoints even
though it is used to linger only for TCP endpoints.
PiperOrigin-RevId: 332369252
|
|
This is required to make tcpdump work. tcpdump falls back to not using things
like PACKET_RX_RING if setsockopt returns ENOPROTOOPT. This used to be the case
before https://github.com/google/gvisor/commit/6f8fb7e0db2790ff1f5ba835780c03fe245e437f.
Fixes #3981
PiperOrigin-RevId: 332326517
|
|
PiperOrigin-RevId: 332097286
|
|
PiperOrigin-RevId: 331256608
|
|
The existing implementation for TransportProtocol.{Set}Option take
arguments of an empty interface type which all types (implicitly)
implement; any type may be passed to the functions.
This change introduces marker interfaces for transport protocol options
that may be set or queried which transport protocol option types
implement to ensure that invalid types are caught at compile time.
Different interfaces are used to allow the compiler to enforce read-only
or set-only socket options.
RELNOTES: n/a
PiperOrigin-RevId: 330559811
|
|
Accept on gVisor will return an error if a socket in the accept queue was closed
before Accept() was called. Linux will return the new fd even if the returned
socket is already closed by the peer say due to a RST being sent by the peer.
This seems to be intentional in linux more details on the github issue.
Fixes #3780
PiperOrigin-RevId: 329828404
|
|
PiperOrigin-RevId: 329526153
|
|
PiperOrigin-RevId: 329036994
|
|
The existing implementation for {G,S}etSockOpt take arguments of an
empty interface type which all types (implicitly) implement; any
type may be passed to the functions.
This change introduces marker interfaces for socket options that may be
set or queried which socket option types implement to ensure that invalid
types are caught at compile time. Different interfaces are used to allow
the compiler to enforce read-only or set-only socket options.
Fixes #3714.
RELNOTES: n/a
PiperOrigin-RevId: 328832161
|
|
In an upcoming CL, socket option types are made to implement a marker
interface with pointer receivers. Since this results in calling methods
of an interface with a pointer, we incur an allocation when attempting
to get an Endpoint's last error with the current implementation.
When calling the method of an interface, the compiler is unable to
determine what the interface implementation does with the pointer
(since calling a method on an interface uses virtual dispatch at runtime
so the compiler does not know what the interface method will do) so it
allocates on the heap to be safe incase an implementation continues to
hold the pointer after the functioon returns (the reference escapes the
scope of the object).
In the example below, the compiler does not know what b.foo does with
the reference to a it allocates a on the heap as the reference to a may
escape the scope of a.
```
var a int
var b someInterface
b.foo(&a)
```
This change removes the opportunity for that allocation.
RELNOTES: n/a
PiperOrigin-RevId: 328796559
|
|
More implementation+testing to follow.
#3549.
PiperOrigin-RevId: 328770160
|
|
iptables sockopts were kludged into an unnecessary check, this properly
relegates them to the {get,set}SockOptIP functions.
PiperOrigin-RevId: 328395135
|
|
When SO_LINGER option is enabled, the close will not return until all the
queued messages are sent and acknowledged for the socket or linger timeout is
reached. If the option is not set, close will return immediately. This option
is mainly supported for connection oriented protocols such as TCP.
PiperOrigin-RevId: 328350576
|
|
We still deviate a bit from linux in how long we will actually wait in
FIN-WAIT-2. Linux seems to cap it with TIME_WAIT_LEN and it's not completely
obvious as to why it's done that way. For now I think we can ignore that and
fix it if it really is an issue.
PiperOrigin-RevId: 328324922
|
|
PiperOrigin-RevId: 327686558
|
|
A later change will introduce the equivalent IPv6 logic.
#3549
PiperOrigin-RevId: 327499064
|
|
- Merges aleksej-paschenko's with HEAD
- Adds vfs2 support for ip_forward
|
|
/proc/sys/net/ipv4/tcp_recovery is used to enable RACK loss
recovery in TCP.
PiperOrigin-RevId: 325157807
|
|
context is passed to DecRef() and Release() which is
needed for SO_LINGER implementation.
PiperOrigin-RevId: 324672584
|
|
Envoy (#170) uses this to get the original destination of redirected
packets.
|
|
PiperOrigin-RevId: 323715260
|
|
PiperOrigin-RevId: 322954792
|
|
Socket option values are now required to implement marshal.Marshallable.
Co-authored-by: Rahat Mahmood <rahat@google.com>
PiperOrigin-RevId: 322831612
|
|
Updates #173
PiperOrigin-RevId: 322665518
|
|
Updates #173
PiperOrigin-RevId: 321690756
|
|
gVisor incorrectly returns the wrong ARP type for SIOGIFHWADDR. This breaks
tcpdump as it tries to interpret the packets incorrectly.
Similarly, SIOCETHTOOL is used by tcpdump to query interface properties which
fails with an EINVAL since we don't implement it. For now change it to return
EOPNOTSUPP to indicate that we don't support the query rather than return
EINVAL.
NOTE: ARPHRD types for link endpoints are distinct from NIC capabilities
and NIC flags. In Linux all 3 exist eg. ARPHRD types are stored in dev->type
field while NIC capabilities are more like the device features which can be
queried using SIOCETHTOOL but not modified and NIC Flags are fields that can
be modified from user space. eg. NIC status (UP/DOWN/MULTICAST/BROADCAST) etc.
Updates #2746
PiperOrigin-RevId: 321436525
|
|
Updates #2746
PiperOrigin-RevId: 320757963
|
|
RFC-1122 (and others) specify that UDP should not receive
datagrams that have a source address that is a multicast address.
Packets should never be received FROM a multicast address.
See also, RFC 768: 'User Datagram Protocol'
J. Postel, ISI, 28 August 1980
A UDP datagram received with an invalid IP source address
(e.g., a broadcast or multicast address) must be discarded
by UDP or by the IP layer (see rfc 1122 Section 3.2.1.3).
This CL does not address TCP or broadcast which is more complicated.
Also adds a test for both ipv6 and ipv4 UDP.
Fixes #3154
PiperOrigin-RevId: 320547674
|
|
Updates #2746
Fixes #3158
PiperOrigin-RevId: 320497190
|
|
SO_NO_CHECK is used to skip the UDP checksum generation on a TX socket
(UDP checksum is optional on IPv4).
Test:
- TestNoChecksum
- SoNoCheckOffByDefault (UdpSocketTest)
- SoNoCheck (UdpSocketTest)
Fixes #3055
PiperOrigin-RevId: 318575215
|
|
Linux controls socket send/receive buffers using a few sysctl variables
- net.core.rmem_default
- net.core.rmem_max
- net.core.wmem_max
- net.core.wmem_default
- net.ipv4.tcp_rmem
- net.ipv4.tcp_wmem
The first 4 control the default socket buffer sizes for all sockets
raw/packet/tcp/udp and also the maximum permitted socket buffer that can be
specified in setsockopt(SOL_SOCKET, SO_(RCV|SND)BUF,...).
The last two control the TCP auto-tuning limits and override the default
specified in rmem_default/wmem_default as well as the max limits.
Netstack today only implements tcp_rmem/tcp_wmem and incorrectly uses it
to limit the maximum size in setsockopt() as well as uses it for raw/udp
sockets.
This changelist introduces the other 4 and updates the udp/raw sockets to use
the newly introduced variables. The values for min/max match the current
tcp_rmem/wmem values and the default value buffers for UDP/RAW sockets is
updated to match the linux value of 212KiB up from the really low current value
of 32 KiB.
Updates #3043
Fixes #3043
PiperOrigin-RevId: 318089805
|
|
Test:
- TestIncrementChecksumErrors
Fixes #2943
PiperOrigin-RevId: 317348158
|
|
Metadata was useful for debugging and safety, but enough tests exist that we
should see failures when (de)serialization is broken. It made stack
initialization more cumbersome and it's also getting in the way of ip6tables.
PiperOrigin-RevId: 317210653
|
|
Updates #173,#6
Fixes #2888
PiperOrigin-RevId: 317087652
|
|
- Change FileDescriptionImpl Lock/UnlockPOSIX signature to
take {start,length,whence}, so the correct offset can be
calculated in the implementations.
- Create PosixLocker interface to make it possible to share
the same locking code from different implementations.
Closes #1480
PiperOrigin-RevId: 316910286
|
|
TCP_KEEPCNT is used to set the maximum keepalive probes to be
sent before dropping the connection.
WANT_LGTM=jchacon
PiperOrigin-RevId: 315758094
|
|
LockFD is the generic implementation that can be embedded in
FileDescriptionImpl implementations. Unique lock ID is
maintained in vfs.FileDescription and is created on demand.
Updates #1480
PiperOrigin-RevId: 315604825
|