summaryrefslogtreecommitdiffhomepage
path: root/pkg/sentry/platform
AgeCommit message (Collapse)Author
2019-07-15kvm: wake up all waiter of vCPU.stateAndrei Vagin
Now we call FUTEX_WAKE with ^uintptr(0) of waiters, but in this case only one waiter will be waked up. If we want to wake up all of them, the number of waiters has to be set to math.MaxInt32. PiperOrigin-RevId: 258285286
2019-07-09tss: block userspace access to all I/O ports.Liu Hua
A userspace process (CPL=3) can access an i/o port if the bit corresponding to the port is set to 0 in the I/O permission bitmap. Configure the I/O permission bitmap address beyond the last valid byte in the TSS so access to all i/o ports is blocked. Signed-off-by: Liu Hua <sdu.liu@huawei.com> Change-Id: I3df76980c3735491db768f7210e71703f86bb989 PiperOrigin-RevId: 257336518
2019-07-03Avoid importing platforms from many source filesAndrei Vagin
PiperOrigin-RevId: 256494243
2019-07-02Solve BounceToKernel may hang issueYong He
BounceToKernel will make vCPU quit from guest ring3 to guest ring0, but vCPUWaiter is not cleared when we unlock the vCPU, when next time this vCPU enter guest mode ring3, vCPU may enter guest mode with vCPUWaiter bit setted, this will cause the following BounceToKernel to this vCPU hangs at waitUntilNot. Halt may workaroud this issue, because halt process will reset vCPU status into vCPUUser, and notify all waiter for vCPU state change, but if there is no exception or syscall in this period, BounceToKernel will hang at waitUntilNot. PiperOrigin-RevId: 256299660
2019-06-28platform/ptrace: return more detailed errorsAndrei Vagin
Right now, if we can't create a stub process, we will see this error: panic: unable to activate mm: resource temporarily unavailable It would be better to know the root cause of this "resource temporarily unavailable". PiperOrigin-RevId: 255656831
2019-06-27Fix various spelling issues in the documentationMichael Pratt
Addresses obvious typos, in the documentation only. COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/443 from Pixep:fix/documentation-spelling 4d0688164eafaf0b3010e5f4824b35d1e7176d65 PiperOrigin-RevId: 255477779
2019-06-27gvisor/ptrace: grub initial thread registers only onceAndrei Vagin
PiperOrigin-RevId: 255465635
2019-06-24Add O_EXITKILL to ptrace options.Adin Scannell
This prevents a race before PDEATH_SIG can take effect during a sentry crash. Discovered and solution by avagin@. PiperOrigin-RevId: 254871534
2019-06-24platform/ptrace: specify PTRACE_O_TRACEEXIT for stub-processesAndrei Vagin
The tracee is stopped early during process exit, when registers are still available, allowing the tracer to see where the exit occurred, whereas the normal exit notifi? cation is done after the process is finished exiting. Without this option, dumpAndPanic fails to get registers. PiperOrigin-RevId: 254852917
2019-06-13Update canonical repository.Adin Scannell
This can be merged after: https://github.com/google/gvisor-website/pull/77 or https://github.com/google/gvisor-website/pull/78 PiperOrigin-RevId: 253132620
2019-06-12gvisor/ptrace: print guest registers if a stub stopped with unexpected codeAndrei Vagin
PiperOrigin-RevId: 252855280
2019-06-10Move //pkg/sentry/platform/procid to //pkg/procid.Jamie Liu
PiperOrigin-RevId: 252501653
2019-05-30Add build guard to files using go:linknameFabricio Voznika
Funcion signatures are not validated during compilation. Since they are not exported, they can change at any time. The guard ensures that they are verified at least on every version upgrade. PiperOrigin-RevId: 250733742
2019-05-30Update procid for Go 1.13Michael Pratt
Upstream Go has no changes here. PiperOrigin-RevId: 250602731
2019-04-29Change copyright notice to "The gVisor Authors"Michael Pratt
Based on the guidelines at https://opensource.google.com/docs/releasing/authors/. 1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./' 2. Manual fixup of "Google Inc" references. 3. Add AUTHORS file. Authors may request to be added to this file. 4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS. Fixes #209 PiperOrigin-RevId: 245823212 Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
2019-04-29Allow and document bug ids in gVisor codebase.Nicolas Lacasse
PiperOrigin-RevId: 245818639 Change-Id: I03703ef0fb9b6675955637b9fe2776204c545789
2019-04-26kvm: remove non-sane sanity checkAdin Scannell
Apparently some platforms don't have pSize < vSize. Fixes #208 PiperOrigin-RevId: 245480998 Change-Id: I2a98229912f4ccbfcd8e79dfa355104f14275a9c
2019-03-21Allow BP and OF can be called from user spaceYong He
Change the DPL from 0 to 3 for Breakpoint and Overflow, then user space could trigger Breakpoint and Overflow as excepected. Change-Id: Ibead65fb8c98b32b7737f316db93b3a8d9dcd648 PiperOrigin-RevId: 239736648
2019-03-14Decouple filemem from platform and move it to pgalloc.MemoryFile.Jamie Liu
This is in preparation for improved page cache reclaim, which requires greater integration between the page cache and page allocator. PiperOrigin-RevId: 238444706 Change-Id: Id24141b3678d96c7d7dc24baddd9be555bffafe4
2019-03-12Clarify the platform.File interface.Jamie Liu
- Redefine some memmap.Mappable, platform.File, and platform.Memory semantics in terms of File reference counts (no functional change). - Make AddressSpace.MapFile take a platform.File instead of a raw FD, and replace platform.File.MapInto with platform.File.FD. This allows kvm.AddressSpace.MapFile to always use platform.File.MapInternal instead of maintaining its own (redundant) cache of file mappings in the sentry address space. PiperOrigin-RevId: 238044504 Change-Id: Ib73a11e4275c0da0126d0194aa6c6017a9cef64f
2019-03-11kvm: minimum guest/host timekeeping delta.Adin Scannell
PiperOrigin-RevId: 237927368 Change-Id: I359badd1967bb118fe74eab3282c946c18937edc
2019-03-05Priority-inheritance futex implementationFabricio Voznika
It is Implemented without the priority inheritance part given that gVisor defers scheduling decisions to Go runtime and doesn't have control over it. PiperOrigin-RevId: 236989545 Change-Id: I714c8ca0798743ecf3167b14ffeb5cd834302560
2019-03-01ptrace: drop old FIXMEAdin Scannell
The globalPool uses a sync.Once mechanism for initialization, and no cleanup is strictly required. It's not really feasible to have the platform implement a full creation -> destruction cycle (due to the way filters are assumed to be installed), so drop the FIXME. PiperOrigin-RevId: 236385278 Change-Id: I98ac660ed58cc688d8a07147d16074a3e8181314
2019-02-28Fix "-c dbg" build breakFabricio Voznika
Remove allocation from vCPU.die() to save stack space. Closes #131 PiperOrigin-RevId: 236238102 Change-Id: Iafca27a1a3a472d4cb11dcda9a2060e585139d11
2019-02-28Upgrade to Go 1.12Michael Pratt
PiperOrigin-RevId: 236218980 Change-Id: I82cb4aeb2a56524ee1324bfea2ad41dce26db354
2019-02-26FPE_INTOVF (integer overflow) should be 2 refer to Linux.Ruidong Cao
Signed-off-by: Ruidong Cao <crdfrank@gmail.com> Change-Id: I03f8ab25cf29257b31f145cf43304525a93f3300 PiperOrigin-RevId: 235763203
2019-02-13Improve safecopy sanity checks.Jamie Liu
- Fix CopyIn/CopyOut/ZeroOut range checks. - Include the faulting signal number in the panic message. PiperOrigin-RevId: 233829501 Change-Id: I8959ead12d05dbd4cd63c2b908cddeb2a27eb513
2019-01-31Remove license commentsMichael Pratt
Nothing reads them and they can simply get stale. Generated with: $ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD PiperOrigin-RevId: 231818945 Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0
2018-12-18Add BPFAction type with StringerFabricio Voznika
PiperOrigin-RevId: 226018694 Change-Id: I98965e26fe565f37e98e5df5f997363ab273c91b
2018-12-10Add safecopy support for arm64 platform.Haibo Xu
Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I565214581eeb44045169da7f44d45a489082ac3a PiperOrigin-RevId: 224938170
2018-12-10Validate FS_BASE in Task.CloneMichael Pratt
arch_prctl already verified that the new FS_BASE was canonical, but Task.Clone did not. Centralize these checks in the arch packages. Failure to validate could cause an error in PTRACE_SET_REGS when we try to switch to the app. PiperOrigin-RevId: 224862398 Change-Id: Iefe63b3f9aa6c4810326b8936e501be3ec407f14
2018-12-04Remove initRegs arg from cloneMichael Pratt
It is always the same as t.initRegs. PiperOrigin-RevId: 224085550 Change-Id: I5cc4ddc3b481d4748c3c43f6f4bb50da1dbac694
2018-11-27Add procid support for arm64 platformHaibo Xu
Change-Id: I7c3db8dfdf95a125d7384c1d67c3300dbb99a47e PiperOrigin-RevId: 223039923
2018-11-20Use RET_KILL_PROCESS if available in kernelFabricio Voznika
RET_KILL_THREAD doesn't work well for Go because it will kill only the offending thread and leave the process hanging. RET_TRAP can be masked out and it's not guaranteed to kill the process. RET_KILL_PROCESS is available since 4.14. For older kernel, continue to use RET_TRAP as this is the best option (likely to kill process, easy to debug). PiperOrigin-RevId: 222357867 Change-Id: Icc1d7d731274b16c2125b7a1ba4f7883fbdb2cbd
2018-11-20Reference upstream licensesMichael Pratt
Include copyright notices and the referenced LICENSE file. PiperOrigin-RevId: 222171321 Change-Id: I0cc0b167ca51b536d1087bf1c4742fdf1430bc2a
2018-10-31kvm: simplify floating point logic.Adin Scannell
This reduces the number of floating point save/restore cycles required (since we don't need to restore immediately following the switch, this always happens in a known context) and allows the kernel hooks to capture state. This lets us remove calls like "Current()". PiperOrigin-RevId: 219552844 Change-Id: I7676fa2f6c18b9919718458aa888b832a7db8cab
2018-10-31kvm: add detailed traces on vCPU errors.Adin Scannell
This improves debuggability greatly. PiperOrigin-RevId: 219551560 Change-Id: I2ecaffdd1c17b0d9f25911538ea6f693e2bc699f
2018-10-31kvm: avoid siginfo allocations.Adin Scannell
PiperOrigin-RevId: 219492587 Change-Id: I47f6fc0b74a4907ab0aff03d5f26453bdb983bb5
2018-10-30kvm: use private futexes.Adin Scannell
Use private futexes for performance and to align with other runtime uses. PiperOrigin-RevId: 219422634 Change-Id: Ief2af5e8302847ea6dc246e8d1ee4d64684ca9dd
2018-10-24Use TRAP to simplify vsyscall emulation.Adin Scannell
PiperOrigin-RevId: 218592058 Change-Id: I373a2d813aa6cc362500dd5a894c0b214a1959d7
2018-10-24Run ptrace stubs in their own session and process group.Nicolas Lacasse
Pseudoterminal job control signals are meant to be received and handled by the sandbox process, but if the ptrace stubs are running in the same process group, they will receive the signals as well and inject then into the sentry kernel. This can result in duplicate signals being delivered (often to the wrong process), or a sentry panic if the ptrace stub is inactive. This CL makes the ptrace stub run in a new session. PiperOrigin-RevId: 218536851 Change-Id: Ie593c5687439bbfbf690ada3b2197ea71ed60a0e
2018-10-23Track paths and provide a rename hook.Adin Scannell
This change also adds extensive testing to the p9 package via mocks. The sanity checks and type checks are moved from the gofer into the core package, where they can be more easily validated. PiperOrigin-RevId: 218296768 Change-Id: I4fc3c326e7bf1e0e140a454cbacbcc6fd617ab55
2018-10-19Use correct company name in copyright headerIan Gudger
PiperOrigin-RevId: 217951017 Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
2018-10-10Add seccomp filter configuration to ptrace stubs.Adin Scannell
This is a defense-in-depth measure. If the sentry is compromised, this prevents system call injection to the stubs. There is some complexity with respect to ptrace and seccomp interactions, so this protection is not really available for kernel versions < 4.8; this is detected dynamically. Note that this also solves the vsyscall emulation issue by adding in appropriate trapping for those system calls. It does mean that a compromised sentry could theoretically inject these into the stub (ignoring the trap and resume, thereby allowing execution), but they are harmless. PiperOrigin-RevId: 216647581 Change-Id: Id06c232cbac1f9489b1803ec97f83097fcba8eb8
2018-09-18Provide better message when memfd_create fails with ENOSYSFabricio Voznika
Updates #100 PiperOrigin-RevId: 213414821 Change-Id: I90c2e6c18c54a6afcd7ad6f409f670aa31577d37
2018-09-14Avoid reuse of pending SignalInfo objectsnewmanwang
runApp.execute -> Task.SendSignal -> sendSignalLocked -> sendSignalTimerLocked -> pendingSignals.enqueue assumes that it owns the arch.SignalInfo returned from platform.Context.Switch. On the other hand, ptrace.context.Switch assumes that it owns the returned SignalInfo and can safely reuse it on the next call to Switch. The KVM platform always returns a unique SignalInfo. This becomes a problem when the returned signal is not immediately delivered, allowing a future signal in Switch to change the previous pending SignalInfo. This is noticeable in #38 when external SIGINTs are delivered from the PTY slave FD. Note that the ptrace stubs are in the same process group as the sentry, so they are eligible to receive the PTY signals. This should probably change, but is not the only possible cause of this bug. Updates #38 Original change by newmanwang <wcs1011@gmail.com>, updated by Michael Pratt <mpratt@google.com>. Change-Id: I5383840272309df70a29f67b25e8221f933622cd PiperOrigin-RevId: 213071072
2018-09-13platform/kvm: Get max vcpu number dynamically by ioctlChenggang
The old kernel version, such as 4.4, only support 255 vcpus. While gvisor is ran on these kernels, it could panic because the vcpu id and vcpu number beyond max_vcpus. Use ioctl(vmfd, _KVM_CHECK_EXTENSION, _KVM_CAP_MAX_VCPUS) to get max vcpus number dynamically. Change-Id: I50dd859a11b1c2cea854a8e27d4bf11a411aa45c PiperOrigin-RevId: 212929704
2018-09-11platform: Pass device fd into platform constructor.Nicolas Lacasse
We were previously openining the platform device (i.e. /dev/kvm) inside the platfrom constructor (i.e. kvm.New). This requires that we have RW access to the platform device when constructing the platform. However, now that the runsc sandbox process runs as user "nobody", it is not able to open the platform device. This CL changes the kvm constructor to take the platform device FD, rather than opening the device file itself. The device file is opened outside of the sandbox and passed to the sandbox process. PiperOrigin-RevId: 212505804 Change-Id: I427e1d9de5eb84c84f19d513356e1bb148a52910
2018-09-10Map committed chunks concurrently in FileMem.LoadFrom.Jamie Liu
PiperOrigin-RevId: 212345401 Change-Id: Iac626ee87ba312df88ab1019ade6ecd62c04c75c
2018-08-28Bump to Go 1.11Michael Pratt
The procid offset is unchanged. PiperOrigin-RevId: 210551969 Change-Id: I33ba1ce56c2f5631b712417d870aa65ef24e6022
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-17 22:31:37 +0000