| Age | Commit message (Collapse) | Author |
|---|
|
PiperOrigin-RevId: 335548610
|
|
- When the KCOV_ENABLE_TRACE ioctl is called with the trace kind KCOV_TRACE_PC,
the kcov mode should be set to KCOV_*MODE*_TRACE_PC.
- When the owning task of kcov exits, the memory mapping should not be cleared
so it can be used by other tasks.
- Add more tests (also tested on native Linux kcov).
PiperOrigin-RevId: 335202585
|
|
PiperOrigin-RevId: 335077195
|
|
- Rewrite arch.Stack.{Push,Pop}. For the most part, stack now
implements marshal.CopyContext and can be used as the target of
marshal operations. Stack.Push had some extra logic for
automatically null-terminating slices. This was only used for two
specific types of slices, and is now handled explicitly.
- Delete usermem.CopyObject{In,Out}.
- Replace most remaining uses of the encoding/binary package with
go-marshal. Most of these were using the binary package to compute
the size of a struct, which go-marshal can directly replace. ~3 uses
of the binary package remain. These aren't reasonably replaceable by
go-marshal: for example one use is to construct the syscall
trampoline for systrap.
- Fill out remaining convenience wrappers in the primitive package.
PiperOrigin-RevId: 334502375
|
|
PiperOrigin-RevId: 334428344
|
|
Previously, we did not check the kcov mode when performing task work. As a
result, disabling kcov did not do anything.
Also avoid expensive atomic RMW when consuming coverage data. We don't need the
swap if the value is already zero (which is most of the time), and it is ok if
there are slight inconsistencies due to a race between coverage data generation
(incrementing the value) and consumption (reading a nonzero value and writing
zero).
PiperOrigin-RevId: 334049207
|
|
Updates #1663
PiperOrigin-RevId: 333539293
|
|
VFS2 socket record is not removed from the system-wide
socket table when the socket is released, which will lead
to a memory leak. This patch fixes this issue.
Fixes: #3874
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
|
|
SocketEntry can be confusing with the template types as the 'Entry'
is usually used as a suffix for list element types, e.g. socketEntry
in the same package. Suggested by Dean (@dean-deng).
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
|
|
Use HandleIOErrorVFS2 instead of custom error handling.
PiperOrigin-RevId: 333227581
|
|
This change includes overlay, special regular gofer files, and hostfs.
Fixes #3589.
PiperOrigin-RevId: 332330860
|
|
CopyContext is a better name for the interface because from
go-marshal's perspective, the interface has nothing to do with a
task. A kernel.Task happens to implement the interface, but so can
other things like MemoryManager and IO sequences.
PiperOrigin-RevId: 331959678
|
|
PiperOrigin-RevId: 331940975
|
|
OCI configuration includes support for specifying seccomp filters. In runc,
these filter configurations are converted into seccomp BPF programs and loaded
into the kernel via libseccomp. runsc needs to be a static binary so, for
runsc, we cannot rely on a C library and need to implement the functionality
in Go.
The generator added here implements basic support for taking OCI seccomp
configuration and converting it into a seccomp BPF program with the same
behavior as a program generated by libseccomp.
- New conditional operations were added to pkg/seccomp to support operations
available in OCI.
- AllowAny and AllowValue were renamed to MatchAny and EqualTo to better reflect
that syscalls matching the conditionals result in the provided action not
simply SCMP_RET_ALLOW.
- BuildProgram in pkg/seccomp no longer panics if provided an empty list of
rules. It now builds a program with the architecture sanity check only.
- ProgramBuilder now allows adding labels that are unused. However, backwards
jumps are still not permitted.
Fixes #510
PiperOrigin-RevId: 331938697
|
|
This is needed for SO_LINGER, where close() is blocked for linger timeout and
we are holding the FDTable lock for the entire timeout which will not allow
us to create/delete other fds. We have to release the locks and then drop the
fds.
PiperOrigin-RevId: 331844185
|
|
In Linux, FDSize is fs/proc/array.c:task_state() => struct fdtable::max_fds,
which is set to the underlying array's length in fs/file.c:alloc_fdtable().
Follow-up changes:
- Remove FDTable.GetRefs() and FDTable.GetRefsVFS2(), which are unused.
- Reset FDTable.used to 0 during restore, since the subsequent calls to
FDTable.setAll() increment it again, causing its value to be doubled. (After
this CL, FDTable.used is only used to avoid reallocation in FDTable.GetFDs(),
so this fix is not very visible.)
PiperOrigin-RevId: 331588190
|
|
PiperOrigin-RevId: 331256608
|
|
The args.MountNamespaceVFS2 is used again after the nil check,
instead, mntnsVFS2 which holds the expected reference should be
used. This patch fixes this issue.
Fixes: #3855
Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
|
|
PiperOrigin-RevId: 329572337
|
|
Fixes *.sh Java runtime tests, where splice()-ing from a pipe to /dev/zero
would not actually empty the pipe.
There was no guarantee that the data would actually be consumed on a splice
operation unless the output file's implementation of Write/PWrite actually
called VFSPipeFD.CopyIn. Now, whatever bytes are "written" are consumed
regardless of whether CopyIn is called or not.
Furthermore, the number of bytes in the IOSequence for reads is now capped at
the amount of data actually available. Before, splicing to /dev/zero would
always return the requested splice size without taking the actual available
data into account.
This change also refactors the case where an input file is spliced into an
output pipe so that it follows a similar pattern, which is arguably cleaner
anyway.
Updates #3576.
PiperOrigin-RevId: 328843954
|
|
PiperOrigin-RevId: 328839759
|
|
This uses the refs_vfs2 template in vfs2 as well as objects common to vfs1 and
vfs2. Note that vfs1-only refcounts are not replaced, since vfs1 will be deleted
soon anyway.
The following structs now use the new tool, with leak check enabled:
devpts:rootInode
fuse:inode
kernfs:Dentry
kernfs:dir
kernfs:readonlyDir
kernfs:StaticDirectory
proc:fdDirInode
proc:fdInfoDirInode
proc:subtasksInode
proc:taskInode
proc:tasksInode
vfs:FileDescription
vfs:MountNamespace
vfs:Filesystem
sys:dir
kernel:FSContext
kernel:ProcessGroup
kernel:Session
shm:Shm
mm:aioMappable
mm:SpecialMappable
transport:queue
And the following use the template, but because they currently are not leak
checked, a TODO is left instead of enabling leak check in this patch:
kernel:FDTable
tun:tunEndpoint
Updates #1486.
PiperOrigin-RevId: 328460377
|
|
In Linux, a kernel configuration is set that compiles the kernel with a
custom function that is called at the beginning of every basic block, which
updates the memory-mapped coverage information. The Go coverage tool does not
allow us to inject arbitrary instructions into basic blocks, but it does
provide data that we can convert to a kcov-like format and transfer them to
userspace through a memory mapping.
Note that this is not a strict implementation of kcov, which is especially
tricky to do because we do not have the same coverage tools available in Go
that that are available for the actual Linux kernel. In Linux, a kernel
configuration is set that compiles the kernel with a custom function that is
called at the beginning of every basic block to write program counters to the
kcov memory mapping. In Go, however, coverage tools only give us a count of
basic blocks as they are executed. Every time we return to userspace, we
collect the coverage information and write out PCs for each block that was
executed, providing userspace with the illusion that the kcov data is always
up to date. For convenience, we also generate a unique synthetic PC for each
block instead of using actual PCs. Finally, we do not provide thread-specific
coverage data (each kcov instance only contains PCs executed by the thread
owning it); instead, we will supply data for any file specified by --
instrumentation_filter.
Also, fix issue in nogo that was causing pkg/coverage:coverage_nogo
compilation to fail.
PiperOrigin-RevId: 328426526
|
|
Some VFS operations (those which operate on FDs) get their credentials via the
context instead of via an explicit creds param. For these cases, we must pass
the overlay credentials on the context.
PiperOrigin-RevId: 327881259
|
|
Our "Preconditions:" blocks are very useful to determine the input invariants,
but they are bit inconsistent throughout the codebase, which makes them harder
to read (particularly cases with 5+ conditions in a single paragraph).
I've reformatted all of the cases to fit in simple rules:
1. Cases with a single condition are placed on a single line.
2. Cases with multiple conditions are placed in a bulleted list.
This format has been added to the style guide.
I've also mentioned "Postconditions:", though those are much less frequently
used, and all uses already match this style.
PiperOrigin-RevId: 327687465
|
|
This is needed to avoid circular dependencies between the vfs and kernel
packages.
PiperOrigin-RevId: 327355524
|
|
The abstract socket namespace no longer holds any references on sockets.
Instead, TryIncRef() is used when a socket is being retrieved in
BoundEndpoint(). Abstract sockets are now responsible for removing themselves
from the namespace they are in, when they are destroyed.
Updates #1486.
PiperOrigin-RevId: 327064173
|
|
It indicates that the Sentry has changed the state of the thread and
next calls of PullFullState() has to do nothing.
PiperOrigin-RevId: 325567415
|
|
PiperOrigin-RevId: 324748508
|
|
context is passed to DecRef() and Release() which is
needed for SO_LINGER implementation.
PiperOrigin-RevId: 324672584
|
|
The subsequent systrap changes will need to import memmap from
the platform package.
PiperOrigin-RevId: 323409486
|
|
Changes the API of tcpip.Clock to also provide a method for scheduling and
rescheduling work after a specified duration. This change also implements the
AfterFunc method for existing implementations of tcpip.Clock.
This is the groundwork required to mock time within tests. All references to
CancellableTimer has been replaced with the tcpip.Job interface, allowing for
custom implementations of scheduling work.
This is a BREAKING CHANGE for clients that implement their own tcpip.Clock or
use tcpip.CancellableTimer. Migration plan:
1. Add AfterFunc(d, f) to tcpip.Clock
2. Replace references of tcpip.CancellableTimer with tcpip.Job
3. Replace calls to tcpip.CancellableTimer#StopLocked with tcpip.Job#Cancel
4. Replace calls to tcpip.CancellableTimer#Reset with tcpip.Job#Schedule
5. Replace calls to tcpip.NewCancellableTimer with tcpip.NewJob.
PiperOrigin-RevId: 322906897
|
|
PiperOrigin-RevId: 322904430
|
|
Like task_work in Linux, this allows us to register callbacks to be executed
before returning to userspace. This is needed for kcov support, which requires
coverage information to be up-to-date whenever we are in user mode. We will
provide coverage data through the kcov interface to enable coverage-directed
fuzzing in syzkaller.
One difference from Linux is that task work cannot queue work before the
transition to userspace that it precedes; queued work will be picked up before
the next transition.
PiperOrigin-RevId: 322889984
|
|
PiperOrigin-RevId: 321411758
|
|
When --debug is enabled, the following log messages are
printed every second filling up the log:
D0430 18:04:42.823775 129561 parameters.go:238] Clock(Monotonic): error: 46 ns, adjusted frequency from 3591713733 Hz to 3591714196 Hz
D0430 18:04:42.823870 129561 parameters.go:238] Clock(Realtime): error: 36 ns, adjusted frequency from 3591714003 Hz to 3591714169 Hz
D0430 18:04:42.823892 129561 timekeeper.go:209] Updating VDSO parameters: {monotonicReady:1 monotonicBaseCycles:15758797714254696 monotonicBaseRef:29000233837 monotonicFrequency:3591714196 realtimeReady:1 realtimeBaseCycles:15758797714610880 realtimeBaseRef:1588269882823867374 realtimeFrequency:3591714169}
Info and warning messages for larger changes are kept the same.
PiperOrigin-RevId: 321048523
|
|
This change gates all FUSE commands (by gating /dev/fuse) behind a runsc
flag. In order to use FUSE commands, use the --fuse flag with the --vfs2
flag. Check if FUSE is enabled by running dmesg in the sandbox.
|
|
PiperOrigin-RevId: 319283715
|
|
- Support FIOASYNC, FIO{SET,GET}OWN, SIOC{G,S}PGRP (refactor getting/setting
owner in the process).
- Unset signal recipient when setting owner with pid == 0 and
valid owner type.
Updates #2923.
PiperOrigin-RevId: 319231420
|
|
Also make some fixes to vfs1's F_SETOWN. The fcntl test now entirely passes
on vfs2.
Fixes #2920.
PiperOrigin-RevId: 318669529
|
|
PiperOrigin-RevId: 318563543
|
|
PiperOrigin-RevId: 318346153
|
|
This field is redundant since state can be stored in the callback.
PiperOrigin-RevId: 318134855
|
|
Previously, it was not possible to encode/decode an object graph which
contained a pointer to a field within another type. This was because the
encoder was previously unable to disambiguate a pointer to an object and a
pointer within the object.
This CL remedies this by constructing an address map tracking the full memory
range object occupy. The encoded Refvalue message has been extended to allow
references to children objects within another object. Because the encoding
process may learn about object structure over time, we cannot encode any
objects under the entire graph has been generated.
This CL also updates the state package to use standard interfaces intead of
reflection-based dispatch in order to improve performance overall. This
includes a custom wire protocol to significantly reduce the number of
allocations and take advantage of structure packing.
As part of these changes, there are a small number of minor changes in other
places of the code base:
* The lists used during encoding are changed to use intrusive lists with the
objectEncodeState directly, which required that the ilist Len() method is
updated to work properly with the ElementMapper mechanism.
* A bug is fixed in the list code wherein Remove() called on an element that is
already removed can corrupt the list (removing the element if there's only a
single element). Now the behavior is correct.
* Standard error wrapping is introduced.
* Compressio was updated to implement the new wire.Reader and wire.Writer
inteface methods directly. The lack of a ReadByte and WriteByte caused issues
not due to interface dispatch, but because underlying slices for a Read or
Write call through an interface would always escape to the heap!
* Statify has been updated to support the new APIs.
See README.md for a description of how the new mechanism works.
PiperOrigin-RevId: 318010298
|
|
- Change FileDescriptionImpl Lock/UnlockPOSIX signature to
take {start,length,whence}, so the correct offset can be
calculated in the implementations.
- Create PosixLocker interface to make it possible to share
the same locking code from different implementations.
Closes #1480
PiperOrigin-RevId: 316910286
|
|
In order to make sure all aio goroutines have stopped during S/R, a new
WaitGroup was added to TaskSet, analagous to runningGoroutines. This WaitGroup
is incremented with each aio goroutine, and waited on during kernel.Pause.
The old VFS1 aio code was changed to use this new WaitGroup, rather than
fs.Async. The only uses of fs.Async are now inode and mount Release operations,
which do not call fs.Async recursively. This fixes a lock-ordering violation
that can cause deadlocks.
Updates #1035.
PiperOrigin-RevId: 316689380
|
|
PiperOrigin-RevId: 316627764
|
|
PiperOrigin-RevId: 316148074
|
|
gaurav1086:sentry_kernel_timekeeper_use_buffered_channel
PiperOrigin-RevId: 315803553
|
|
Signed-off-by: Gaurav Singh <gaurav1086@gmail.com>
|
