summaryrefslogtreecommitdiffhomepage
path: root/pkg/sentry/kernel
AgeCommit message (Collapse)Author
2020-12-03Implement command IPC_INFO for semctl.Jing Chen
PiperOrigin-RevId: 345589628
2020-12-03Implement `fcntl` options `F_GETSIG` and `F_SETSIG`.Etienne Perot
These options allow overriding the signal that gets sent to the process when I/O operations are available on the file descriptor, rather than the default `SIGIO` signal. Doing so also populates `siginfo` to contain extra information about which file descriptor caused the event (`si_fd`) and what events happened on it (`si_band`). The logic around which FD is populated within `si_fd` matches Linux's, which means it has some weird edge cases where that value may not actually refer to a file descriptor that is still valid. This CL also ports extra S/R logic regarding async handler in VFS2. Without this, async I/O handlers aren't properly re-registered after S/R. PiperOrigin-RevId: 345436598
2020-12-02Do not unconditionally allocate in kernel.FDTable.setAll().Jamie Liu
`slice := *(*[]unsafe.Pointer)(...)` makes a copy of the slice header, which then escapes because of the conditional `atomic.StorePointer(&f.slice, &slice)` from table expansion. This occurs even when the table doesn't expand, and when it can't (e.g. `close()` => `f.setAll(nil)`). Fix this by avoiding the copy until after table expansion. Before this CL: ``` TEXT pkg/sentry/kernel/kernel.(*FDTable).setAll(SB) pkg/sentry/kernel/fd_table_unsafe.go fd_table_unsafe.go:119 0x7f00005f50e0 64488b0c25f8ffffff MOVQ FS:0xfffffff8, CX fd_table_unsafe.go:119 0x7f00005f50e9 483b6110 CMPQ 0x10(CX), SP fd_table_unsafe.go:119 0x7f00005f50ed 0f864d040000 JBE 0x7f00005f5540 fd_table_unsafe.go:119 0x7f00005f50f3 4883c480 ADDQ $-0x80, SP fd_table_unsafe.go:119 0x7f00005f50f7 48896c2478 MOVQ BP, 0x78(SP) fd_table_unsafe.go:119 0x7f00005f50fc 488d6c2478 LEAQ 0x78(SP), BP fd_table_unsafe.go:120 0x7f00005f5101 488b8424a8000000 MOVQ 0xa8(SP), AX fd_table_unsafe.go:120 0x7f00005f5109 4885c0 TESTQ AX, AX fd_table_unsafe.go:120 0x7f00005f510c 7411 JE 0x7f00005f511f fd_table_unsafe.go:120 0x7f00005f510e 488b8c24b0000000 MOVQ 0xb0(SP), CX fd_table_unsafe.go:120 0x7f00005f5116 4885c9 TESTQ CX, CX fd_table_unsafe.go:120 0x7f00005f5119 0f8500040000 JNE 0x7f00005f551f fd_table_unsafe.go:124 0x7f00005f511f 488d05da115700 LEAQ 0x5711da(IP), AX fd_table_unsafe.go:124 0x7f00005f5126 48890424 MOVQ AX, 0(SP) fd_table_unsafe.go:124 0x7f00005f512a e8d19fa1ff CALL runtime.newobject(SB) fd_table_unsafe.go:124 0x7f00005f512f 488b7c2408 MOVQ 0x8(SP), DI fd_table_unsafe.go:124 0x7f00005f5134 488b842488000000 MOVQ 0x88(SP), AX fd_table_unsafe.go:124 0x7f00005f513c 488b4820 MOVQ 0x20(AX), CX fd_table_unsafe.go:124 0x7f00005f5140 488b5108 MOVQ 0x8(CX), DX fd_table_unsafe.go:124 0x7f00005f5144 488b19 MOVQ 0(CX), BX fd_table_unsafe.go:124 0x7f00005f5147 488b4910 MOVQ 0x10(CX), CX fd_table_unsafe.go:124 0x7f00005f514b 48895708 MOVQ DX, 0x8(DI) fd_table_unsafe.go:124 0x7f00005f514f 48894f10 MOVQ CX, 0x10(DI) fd_table_unsafe.go:124 0x7f00005f5153 833df6e1120100 CMPL $0x0, runtime.writeBarrier(SB) fd_table_unsafe.go:124 0x7f00005f515a 660f1f440000 NOPW 0(AX)(AX*1) fd_table_unsafe.go:124 0x7f00005f5160 0f8589030000 JNE 0x7f00005f54ef fd_table_unsafe.go:124 0x7f00005f5166 48891f MOVQ BX, 0(DI) fd_table_unsafe.go:124 0x7f00005f5169 48897c2470 MOVQ DI, 0x70(SP) fd_table_unsafe.go:127 0x7f00005f516e 8bb424a0000000 MOVL 0xa0(SP), SI fd_table_unsafe.go:127 0x7f00005f5175 39d6 CMPL DX, SI fd_table_unsafe.go:127 0x7f00005f5177 0f8c5f030000 JL 0x7f00005f54dc ... ``` After this CL: ``` TEXT pkg/sentry/kernel/kernel.(*FDTable).setAll(SB) pkg/sentry/kernel/fd_table_unsafe.go fd_table_unsafe.go:119 0x7f00005f50e0 64488b0c25f8ffffff MOVQ FS:0xfffffff8, CX fd_table_unsafe.go:119 0x7f00005f50e9 488d4424e8 LEAQ -0x18(SP), AX fd_table_unsafe.go:119 0x7f00005f50ee 483b4110 CMPQ 0x10(CX), AX fd_table_unsafe.go:119 0x7f00005f50f2 0f868e040000 JBE 0x7f00005f5586 fd_table_unsafe.go:119 0x7f00005f50f8 4881ec98000000 SUBQ $0x98, SP fd_table_unsafe.go:119 0x7f00005f50ff 4889ac2490000000 MOVQ BP, 0x90(SP) fd_table_unsafe.go:119 0x7f00005f5107 488dac2490000000 LEAQ 0x90(SP), BP fd_table_unsafe.go:120 0x7f00005f510f 488b9424c0000000 MOVQ 0xc0(SP), DX fd_table_unsafe.go:120 0x7f00005f5117 660f1f840000000000 NOPW 0(AX)(AX*1) fd_table_unsafe.go:120 0x7f00005f5120 4885d2 TESTQ DX, DX fd_table_unsafe.go:120 0x7f00005f5123 0f8406040000 JE 0x7f00005f552f fd_table_unsafe.go:120 0x7f00005f5129 488b9c24c8000000 MOVQ 0xc8(SP), BX fd_table_unsafe.go:120 0x7f00005f5131 4885db TESTQ BX, BX fd_table_unsafe.go:120 0x7f00005f5134 0f852b040000 JNE 0x7f00005f5565 fd_table_unsafe.go:124 0x7f00005f513a 488bb424a0000000 MOVQ 0xa0(SP), SI fd_table_unsafe.go:124 0x7f00005f5142 488b7e20 MOVQ 0x20(SI), DI fd_table_unsafe.go:127 0x7f00005f5146 4c8b4708 MOVQ 0x8(DI), R8 fd_table_unsafe.go:127 0x7f00005f514a 448b8c24b8000000 MOVL 0xb8(SP), R9 fd_table_unsafe.go:127 0x7f00005f5152 4539c1 CMPL R8, R9 fd_table_unsafe.go:127 0x7f00005f5155 0f8d4a020000 JGE 0x7f00005f53a5 ... ``` PiperOrigin-RevId: 345363242
2020-12-02Add /proc/sys/kernel/sem.Jing Chen
PiperOrigin-RevId: 345178956
2020-11-18Add a few syslog messages.Etienne Perot
PiperOrigin-RevId: 343123278
2020-11-16Reset watchdog timer between sendfile() iterations.Jamie Liu
As part of this, change Task.interrupted() to not drain Task.interruptChan, and do so explicitly using new function Task.unsetInterrupted() instead. PiperOrigin-RevId: 342768365
2020-11-13Log task goroutine IDs in the sentry watchdog.Jamie Liu
PiperOrigin-RevId: 342373580
2020-11-13Check for misuse of kernel.Task as context.Context.Jamie Liu
Checks in Task.block() and Task.Value() are conditional on race detection being enabled, since these functions are relatively hot. Checks in Task.SleepStart() and Task.UninterruptibleSleepStart() are enabled unconditionally, since these functions are not thought to lie on any critical paths, and misuse of these functions is required for b/168241471 to manifest. PiperOrigin-RevId: 342342175
2020-11-12Fix misuses of kernel.Task as context.Context.Jamie Liu
kernel.Task can only be used as context.Context by that Task's task goroutine. This is violated in at least two places: - In any case where one thread accesses the /proc/[tid] of any other thread, passing the kernel.Task for [tid] as the context.Context is incorrect. - Task.rebuildTraceContext() may be called by Kernel.RebuildTraceContexts() outside the scope of any task goroutine. Fix these (as well as a data race on Task.traceContext discovered during the course of finding the latter). PiperOrigin-RevId: 342174404
2020-11-12Rename kernel.TaskContext to kernel.TaskImage.Jamie Liu
This reduces confusion with context.Context (which is also relevant to kernel.Tasks) and is consistent with existing function kernel.LoadTaskImage(). PiperOrigin-RevId: 342167298
2020-11-09Initialize references with a value of 1.Dean Deng
This lets us avoid treating a value of 0 as one reference. All references using the refsvfs2 template must call InitRefs() before the reference is incremented/decremented, or else a panic will occur. Therefore, it should be pretty easy to identify missing InitRef calls during testing. Updates #1486. PiperOrigin-RevId: 341411151
2020-11-06Implement command GETNCNT for semctl.Jing Chen
PiperOrigin-RevId: 341154192
2020-11-03Fix more nogo testsTing-Yu Wang
PiperOrigin-RevId: 340536306
2020-11-03Make pipe min/max sizes match linux.Nicolas Lacasse
The default pipe size already matched linux, and is unchanged. Furthermore `atomicIOBytes` is made a proper constant (as it is in Linux). We were plumbing usermem.PageSize everywhere, so this is no functional change. PiperOrigin-RevId: 340497006
2020-11-02Implement command GETZCNT for semctl.Jing Chen
PiperOrigin-RevId: 340389884
2020-10-30Separate kernel.Task.AsCopyContext() into CopyContext() and OwnCopyContext().Jamie Liu
kernel.copyContext{t} cannot be used outside of t's task goroutine, for three reasons: - t.CopyScratchBuffer() is task-goroutine-local. - Calling t.MemoryManager() without running on t's task goroutine or locking t.mu violates t.MemoryManager()'s preconditions. - kernel.copyContext passes t as context.Context to MM IO methods, which is illegal outside of t's task goroutine (cf. kernel.Task.Value()). Fix this by splitting AsCopyContext() into CopyContext() (which takes an explicit context.Context and is usable outside of the task goroutine) and OwnCopyContext() (which uses t as context.Context, but is only usable by t's task goroutine). PiperOrigin-RevId: 339933809
2020-10-26Implement command IPC_STAT for semctl.Jing Chen
PiperOrigin-RevId: 339166854
2020-10-23Support VFS2 save/restore.Jamie Liu
Inode number consistency checks are now skipped in save/restore tests for reasons described in greatest detail in StatTest.StateDoesntChangeAfterRename. They pass in VFS1 due to the bug described in new test case SimpleStatTest.DifferentFilesHaveDifferentDeviceInodeNumberPairs. Fixes #1663 PiperOrigin-RevId: 338776148
2020-10-23Rewrite reference leak checker without finalizers.Dean Deng
Our current reference leak checker uses finalizers to verify whether an object has reached zero references before it is garbage collected. There are multiple problems with this mechanism, so a rewrite is in order. With finalizers, there is no way to guarantee that a finalizer will run before the program exits. When an unreachable object with a finalizer is garbage collected, its finalizer will be added to a queue and run asynchronously. The best we can do is run garbage collection upon sandbox exit to make sure that all finalizers are enqueued. Furthermore, if there is a chain of finalized objects, e.g. A points to B points to C, garbage collection needs to run multiple times before all of the finalizers are enqueued. The first GC run will register the finalizer for A but not free it. It takes another GC run to free A, at which point B's finalizer can be registered. As a result, we need to run GC as many times as the length of the longest such chain to have a somewhat reliable leak checker. Finally, a cyclical chain of structs pointing to one another will never be garbage collected if a finalizer is set. This is a well-known issue with Go finalizers (https://github.com/golang/go/issues/7358). Using leak checking on filesystem objects that produce cycles will not work and even result in memory leaks. The new leak checker stores reference counted objects in a global map when leak check is enabled and removes them once they are destroyed. At sandbox exit, any remaining objects in the map are considered as leaked. This provides a deterministic way of detecting leaks without relying on the complexities of finalizers and garbage collection. This approach has several benefits over the former, including: - Always detects leaks of objects that should be destroyed very close to sandbox exit. The old checker very rarely detected these leaks, because it relied on garbage collection to be run in a short window of time. - Panics if we forgot to enable leak check on a ref-counted object (we will try to remove it from the map when it is destroyed, but it will never have been added). - Can store extra logging information in the map values without adding to the size of the ref count struct itself. With the size of just an int64, the ref count object remains compact, meaning frequent operations like IncRef/DecRef are more cache-efficient. - Can aggregate leak results in a single report after the sandbox exits. Instead of having warnings littered in the log, which were non-deterministically triggered by garbage collection, we can print all warning messages at once. Note that this could also be a limitation--the sandbox must exit properly for leaks to be detected. Some basic benchmarking indicates that this change does not significantly affect performance when leak checking is enabled, which is understandable since registering/unregistering is only done once for each filesystem object. Updates #1486. PiperOrigin-RevId: 338685972
2020-10-21Check for nil in kernel.FSContext functions.Dean Deng
Reported-by: syzbot+c0e175d2b10708314eb3@syzkaller.appspotmail.com PiperOrigin-RevId: 338386575
2020-10-19Fix reference counting on kcov mappings.Dean Deng
Reported-by: syzbot+078580ce5dd6d607fcd8@syzkaller.appspotmail.com Reported-by: syzbot+2096681f6891e7bf8aed@syzkaller.appspotmail.com PiperOrigin-RevId: 337973519
2020-10-19Fix runsc tests on VFS2 overlay.Jamie Liu
- Check the sticky bit in overlay.filesystem.UnlinkAt(). Fixes StickyTest.StickyBitPermDenied. - When configuring a VFS2 overlay in runsc, copy the lower layer's root owner/group/mode to the upper layer's root (as in the VFS1 equivalent, boot.addOverlay()). This makes the overlay root owned by UID/GID 65534 with mode 0755 rather than owned by UID/GID 0 with mode 01777. Fixes CreateTest.CreateFailsOnUnpermittedDir, which assumes that the test cannot create files in /. - MknodTest.UnimplementedTypesReturnError assumes that the creation of device special files is not supported. However, while the VFS2 gofer client still doesn't support device special files, VFS2 tmpfs does, and in the overlay test dimension mknod() targets a tmpfs upper layer. The test initially has all capabilities, including CAP_MKNOD, so its creation of these files succeeds. Constrain these tests to VFS1. - Rename overlay.nonDirectoryFD to overlay.regularFileFD and only use it for regular files, using the original FD for pipes and device special files. This is more consistent with Linux (which gets the original inode_operations, and therefore file_operations, for these file types from ovl_fill_inode() => init_special_inode()) and fixes remaining mknod and pipe tests. - Read/write 1KB at a time in PipeTest.Streaming, rather than 4 bytes. This isn't strictly necessary, but it makes the test less obnoxiously slow on ptrace. Fixes #4407 PiperOrigin-RevId: 337971042
2020-10-19[vfs2] Fix fork reference leaks.Dean Deng
PiperOrigin-RevId: 337919424
2020-10-14Fix shm reference leak.Dean Deng
All shm segments in an IPC namespace should be released once that namespace is destroyed. Add reference counting to IPCNamespace so that once the last task with a reference on it exits, we can trigger a destructor that will clean up all shm segments that have not been explicitly freed by the application. PiperOrigin-RevId: 337032977
2020-10-13[vfs2] Don't take reference in Task.MountNamespaceVFS2 and MountNamespace.Root.Dean Deng
This fixes reference leaks related to accidentally forgetting to DecRef() after calling one or the other. PiperOrigin-RevId: 336918922
2020-10-13Don't leak VDSO mappings.Dean Deng
PiperOrigin-RevId: 336822021
2020-10-12[vfs2] Don't leak disconnected mounts.Dean Deng
PiperOrigin-RevId: 336694658
2020-10-09Reduce the cost of sysinfo(2).Jamie Liu
- sysinfo(2) does not actually require a fine-grained breakdown of memory usage. Accordingly, instead of calling pgalloc.MemoryFile.UpdateUsage() to update the sentry's fine-grained memory accounting snapshot, just use pgalloc.MemoryFile.TotalUsage() (which is a single fstat(), and therefore far cheaper). - Use the number of threads in the root PID namespace (i.e. globally) rather than in the task's PID namespace for consistency with Linux (which just reads global variable nr_threads), and add a new method to kernel.PIDNamespace to allow this to be read directly from an underlying map rather than requiring the allocation and population of an intermediate slice. PiperOrigin-RevId: 336353100
2020-10-05Simplify nil assignment in kcov.Dean Deng
PiperOrigin-RevId: 335548610
2020-10-03Fix kcov enabling and disabling procedures.Dean Deng
- When the KCOV_ENABLE_TRACE ioctl is called with the trace kind KCOV_TRACE_PC, the kcov mode should be set to KCOV_*MODE*_TRACE_PC. - When the owning task of kcov exits, the memory mapping should not be cleared so it can be used by other tasks. - Add more tests (also tested on native Linux kcov). PiperOrigin-RevId: 335202585
2020-10-02Convert uses of the binary package in kernel to go-marshal.Rahat Mahmood
PiperOrigin-RevId: 335077195
2020-09-29Replace remaining uses of reflection-based marshalling.Rahat Mahmood
- Rewrite arch.Stack.{Push,Pop}. For the most part, stack now implements marshal.CopyContext and can be used as the target of marshal operations. Stack.Push had some extra logic for automatically null-terminating slices. This was only used for two specific types of slices, and is now handled explicitly. - Delete usermem.CopyObject{In,Out}. - Replace most remaining uses of the encoding/binary package with go-marshal. Most of these were using the binary package to compute the size of a struct, which go-marshal can directly replace. ~3 uses of the binary package remain. These aren't reasonably replaceable by go-marshal: for example one use is to construct the syscall trampoline for systrap. - Fill out remaining convenience wrappers in the primitive package. PiperOrigin-RevId: 334502375
2020-09-29Merge pull request #3875 from btw616:fix/issue-3874gVisor bot
PiperOrigin-RevId: 334428344
2020-09-27Clean up kcov.Dean Deng
Previously, we did not check the kcov mode when performing task work. As a result, disabling kcov did not do anything. Also avoid expensive atomic RMW when consuming coverage data. We don't need the swap if the value is already zero (which is most of the time), and it is ok if there are slight inconsistencies due to a race between coverage data generation (incrementing the value) and consumption (reading a nonzero value and writing zero). PiperOrigin-RevId: 334049207
2020-09-24Add basic stateify annotations.Adin Scannell
Updates #1663 PiperOrigin-RevId: 333539293
2020-09-24Fix socket record leak in VFS2Tiwei Bie
VFS2 socket record is not removed from the system-wide socket table when the socket is released, which will lead to a memory leak. This patch fixes this issue. Fixes: #3874 Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
2020-09-24Rename kernel.SocketEntry to kernel.SocketRecordTiwei Bie
SocketEntry can be confusing with the template types as the 'Entry' is usually used as a suffix for list element types, e.g. socketEntry in the same package. Suggested by Dean (@dean-deng). Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
2020-09-22Handle EOF properly in splice/sendfile.Dean Deng
Use HandleIOErrorVFS2 instead of custom error handling. PiperOrigin-RevId: 333227581
2020-09-17Complete vfs2 implementation of fallocate.Dean Deng
This change includes overlay, special regular gofer files, and hostfs. Fixes #3589. PiperOrigin-RevId: 332330860
2020-09-16Rename marshal.Task to marshal.CopyContext.Rahat Mahmood
CopyContext is a better name for the interface because from go-marshal's perspective, the interface has nothing to do with a task. A kernel.Task happens to implement the interface, but so can other things like MemoryManager and IO sequences. PiperOrigin-RevId: 331959678
2020-09-15Enable automated marshalling for the syscall package.Rahat Mahmood
PiperOrigin-RevId: 331940975
2020-09-15Add support for OCI seccomp filters in the sandbox.Ian Lewis
OCI configuration includes support for specifying seccomp filters. In runc, these filter configurations are converted into seccomp BPF programs and loaded into the kernel via libseccomp. runsc needs to be a static binary so, for runsc, we cannot rely on a C library and need to implement the functionality in Go. The generator added here implements basic support for taking OCI seccomp configuration and converting it into a seccomp BPF program with the same behavior as a program generated by libseccomp. - New conditional operations were added to pkg/seccomp to support operations available in OCI. - AllowAny and AllowValue were renamed to MatchAny and EqualTo to better reflect that syscalls matching the conditionals result in the provided action not simply SCMP_RET_ALLOW. - BuildProgram in pkg/seccomp no longer panics if provided an empty list of rules. It now builds a program with the architecture sanity check only. - ProgramBuilder now allows adding labels that are unused. However, backwards jumps are still not permitted. Fixes #510 PiperOrigin-RevId: 331938697
2020-09-15Release FDTable lock before dropping the fds.Nayana Bidari
This is needed for SO_LINGER, where close() is blocked for linger timeout and we are holding the FDTable lock for the entire timeout which will not allow us to create/delete other fds. We have to release the locks and then drop the fds. PiperOrigin-RevId: 331844185
2020-09-14Correct FDSize in /proc/[pid]/status.Jamie Liu
In Linux, FDSize is fs/proc/array.c:task_state() => struct fdtable::max_fds, which is set to the underlying array's length in fs/file.c:alloc_fdtable(). Follow-up changes: - Remove FDTable.GetRefs() and FDTable.GetRefsVFS2(), which are unused. - Reset FDTable.used to 0 during restore, since the subsequent calls to FDTable.setAll() increment it again, causing its value to be doubled. (After this CL, FDTable.used is only used to avoid reallocation in FDTable.GetFDs(), so this fix is not very visible.) PiperOrigin-RevId: 331588190
2020-09-11Move the 'marshal' and 'primitive' packages to the 'pkg' directory.Rahat Mahmood
PiperOrigin-RevId: 331256608
2020-09-08Fix the use after nil check on args.MountNamespaceVFS2Tiwei Bie
The args.MountNamespaceVFS2 is used again after the nil check, instead, mntnsVFS2 which holds the expected reference should be used. This patch fixes this issue. Fixes: #3855 Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
2020-09-01Fix panic when calling dup2().Nayana Bidari
PiperOrigin-RevId: 329572337
2020-08-27Fix vfs2 pipe behavior when splicing to a non-pipe.Dean Deng
Fixes *.sh Java runtime tests, where splice()-ing from a pipe to /dev/zero would not actually empty the pipe. There was no guarantee that the data would actually be consumed on a splice operation unless the output file's implementation of Write/PWrite actually called VFSPipeFD.CopyIn. Now, whatever bytes are "written" are consumed regardless of whether CopyIn is called or not. Furthermore, the number of bytes in the IOSequence for reads is now capped at the amount of data actually available. Before, splicing to /dev/zero would always return the requested splice size without taking the actual available data into account. This change also refactors the case where an input file is spliced into an output pipe so that it follows a similar pattern, which is arguably cleaner anyway. Updates #3576. PiperOrigin-RevId: 328843954
2020-08-27[go-marshal] Support for usermem.IOOpts.Ayush Ranjan
PiperOrigin-RevId: 328839759
2020-08-25Use new reference count utility throughout gvisor.Dean Deng
This uses the refs_vfs2 template in vfs2 as well as objects common to vfs1 and vfs2. Note that vfs1-only refcounts are not replaced, since vfs1 will be deleted soon anyway. The following structs now use the new tool, with leak check enabled: devpts:rootInode fuse:inode kernfs:Dentry kernfs:dir kernfs:readonlyDir kernfs:StaticDirectory proc:fdDirInode proc:fdInfoDirInode proc:subtasksInode proc:taskInode proc:tasksInode vfs:FileDescription vfs:MountNamespace vfs:Filesystem sys:dir kernel:FSContext kernel:ProcessGroup kernel:Session shm:Shm mm:aioMappable mm:SpecialMappable transport:queue And the following use the template, but because they currently are not leak checked, a TODO is left instead of enabling leak check in this patch: kernel:FDTable tun:tunEndpoint Updates #1486. PiperOrigin-RevId: 328460377
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 22:13:06 +0000