summaryrefslogtreecommitdiffhomepage
path: root/pkg/sentry/kernel/pipe
AgeCommit message (Collapse)Author
2020-10-24Merge release-20201019.0-51-g9f87400f0 (automated)gVisor bot
2020-10-23Support VFS2 save/restore.Jamie Liu
Inode number consistency checks are now skipped in save/restore tests for reasons described in greatest detail in StatTest.StateDoesntChangeAfterRename. They pass in VFS1 due to the bug described in new test case SimpleStatTest.DifferentFilesHaveDifferentDeviceInodeNumberPairs. Fixes #1663 PiperOrigin-RevId: 338776148
2020-10-20Merge release-20201005.0-104-gcd86bd493 (automated)gVisor bot
2020-10-19Fix runsc tests on VFS2 overlay.Jamie Liu
- Check the sticky bit in overlay.filesystem.UnlinkAt(). Fixes StickyTest.StickyBitPermDenied. - When configuring a VFS2 overlay in runsc, copy the lower layer's root owner/group/mode to the upper layer's root (as in the VFS1 equivalent, boot.addOverlay()). This makes the overlay root owned by UID/GID 65534 with mode 0755 rather than owned by UID/GID 0 with mode 01777. Fixes CreateTest.CreateFailsOnUnpermittedDir, which assumes that the test cannot create files in /. - MknodTest.UnimplementedTypesReturnError assumes that the creation of device special files is not supported. However, while the VFS2 gofer client still doesn't support device special files, VFS2 tmpfs does, and in the overlay test dimension mknod() targets a tmpfs upper layer. The test initially has all capabilities, including CAP_MKNOD, so its creation of these files succeeds. Constrain these tests to VFS1. - Rename overlay.nonDirectoryFD to overlay.regularFileFD and only use it for regular files, using the original FD for pipes and device special files. This is more consistent with Linux (which gets the original inode_operations, and therefore file_operations, for these file types from ovl_fill_inode() => init_special_inode()) and fixes remaining mknod and pipe tests. - Read/write 1KB at a time in PipeTest.Streaming, rather than 4 bytes. This isn't strictly necessary, but it makes the test less obnoxiously slow on ptrace. Fixes #4407 PiperOrigin-RevId: 337971042
2020-10-09Merge release-20200928.0-78-g743327817 (automated)gVisor bot
2020-10-08Merge release-20200928.0-66-ga55bd73d4 (automated)gVisor bot
2020-09-30Merge release-20200921.0-74-g387501219 (automated)gVisor bot
2020-09-29Replace remaining uses of reflection-based marshalling.Rahat Mahmood
- Rewrite arch.Stack.{Push,Pop}. For the most part, stack now implements marshal.CopyContext and can be used as the target of marshal operations. Stack.Push had some extra logic for automatically null-terminating slices. This was only used for two specific types of slices, and is now handled explicitly. - Delete usermem.CopyObject{In,Out}. - Replace most remaining uses of the encoding/binary package with go-marshal. Most of these were using the binary package to compute the size of a struct, which go-marshal can directly replace. ~3 uses of the binary package remain. These aren't reasonably replaceable by go-marshal: for example one use is to construct the syscall trampoline for systrap. - Fill out remaining convenience wrappers in the primitive package. PiperOrigin-RevId: 334502375
2020-09-23Merge release-20200914.0-136-gb54dbdfdc (automated)gVisor bot
2020-09-22Handle EOF properly in splice/sendfile.Dean Deng
Use HandleIOErrorVFS2 instead of custom error handling. PiperOrigin-RevId: 333227581
2020-09-17Merge release-20200907.0-129-g319d1b8ba (automated)gVisor bot
2020-09-17Complete vfs2 implementation of fallocate.Dean Deng
This change includes overlay, special regular gofer files, and hostfs. Fixes #3589. PiperOrigin-RevId: 332330860
2020-08-28Merge release-20200818.0-77-g84f04909c (automated)gVisor bot
2020-08-27Fix vfs2 pipe behavior when splicing to a non-pipe.Dean Deng
Fixes *.sh Java runtime tests, where splice()-ing from a pipe to /dev/zero would not actually empty the pipe. There was no guarantee that the data would actually be consumed on a splice operation unless the output file's implementation of Write/PWrite actually called VFSPipeFD.CopyIn. Now, whatever bytes are "written" are consumed regardless of whether CopyIn is called or not. Furthermore, the number of bytes in the IOSequence for reads is now capped at the amount of data actually available. Before, splicing to /dev/zero would always return the requested splice size without taking the actual available data into account. This change also refactors the case where an input file is spliced into an output pipe so that it follows a similar pattern, which is arguably cleaner anyway. Updates #3576. PiperOrigin-RevId: 328843954
2020-08-03Merge release-20200622.1-313-gb2ae7ea1b (automated)gVisor bot
2020-08-03Plumbing context.Context to DecRef() and Release().Nayana Bidari
context is passed to DecRef() and Release() which is needed for SO_LINGER implementation. PiperOrigin-RevId: 324672584
2020-07-01Merge release-20200622.1-52-g6a90c88b9 (automated)gVisor bot
2020-07-01Port fallocate to VFS2.Zach Koopmans
PiperOrigin-RevId: 319283715
2020-06-24Merge release-20200608.0-119-g364ac92ba (automated)gVisor bot
2020-06-17Merge release-20200608.0-69-g96519e2c9 (automated)gVisor bot
2020-06-17Implement POSIX locksFabricio Voznika
- Change FileDescriptionImpl Lock/UnlockPOSIX signature to take {start,length,whence}, so the correct offset can be calculated in the implementations. - Create PosixLocker interface to make it possible to share the same locking code from different implementations. Closes #1480 PiperOrigin-RevId: 316910286
2020-06-10Merge release-20200522.0-112-g67565078b (automated)gVisor bot
2020-06-09Implement flock(2) in VFS2Fabricio Voznika
LockFD is the generic implementation that can be embedded in FileDescriptionImpl implementations. Unique lock ID is maintained in vfs.FileDescription and is created on demand. Updates #1480 PiperOrigin-RevId: 315604825
2020-05-27Merge release-20200518.0-45-g0bc022b7 (automated)gVisor bot
2020-05-26Implement splice(2) and tee(2) for VFS2.Jamie Liu
Updates #138 PiperOrigin-RevId: 313326354
2020-05-16Merge release-20200511.0-251-g420b791 (automated)gVisor bot
2020-05-15Minor formatting updates for gvisor.dev.Adin Scannell
* Aggregate architecture Overview in "What is gVisor?" as it makes more sense in one place. * Drop "user-space kernel" and use "application kernel". The term "user-space kernel" is confusing when some platform implementation do not run in user-space (instead running in guest ring zero). * Clear up the relationship between the Platform page in the user guide and the Platform page in the architecture guide, and ensure they are cross-linked. * Restore the call-to-action quick start link in the main page, and drop the GitHub link (which also appears in the top-right). * Improve image formatting by centering all doc and blog images, and move the image captions to the alt text. PiperOrigin-RevId: 311845158
2020-04-17Merge release-20200323.0-173-gf03996c (automated)gVisor bot
2020-04-16Implement pipe(2) and pipe2(2) for VFS2.Jamie Liu
Updates #1035 PiperOrigin-RevId: 306968644
2020-04-03Merge release-20200323.0-67-ga943096 (automated)gVisor bot
2020-04-03Ensure EOF is handled propertly during splice.Adin Scannell
PiperOrigin-RevId: 304684417
2020-02-28Merge release-20200219.0-69-g463f421 (automated)gVisor bot
2020-02-28Make pipe buffer implementation standard.Adin Scannell
A follow-up change will convert the networking code to use this standard pipe implementation. PiperOrigin-RevId: 297903206
2020-02-11Merge release-20200127.0-130-g9be46e5 (automated)gVisor bot
2020-01-27Merge release-20200115.0-110-g0e2f1b7 (automated)gVisor bot
2020-01-27Update package locations.Adin Scannell
Because the abi will depend on the core types for marshalling (usermem, context, safemem, safecopy), these need to be flattened from the sentry directory. These packages contain no sentry-specific details. PiperOrigin-RevId: 291811289
2020-01-27Standardize on tools directory.Adin Scannell
PiperOrigin-RevId: 291745021
2020-01-22Merge release-20200115.0-72-g5ab1213 (automated)gVisor bot
2020-01-22Move VFS2 handling of FD readability/writability to vfs.FileDescription.Jamie Liu
PiperOrigin-RevId: 291006713
2020-01-10Merge release-20191213.0-96-g27500d5 (automated)gVisor bot
2020-01-09New sync package.Ian Gudger
* Rename syncutil to sync. * Add aliases to sync types. * Replace existing usage of standard library sync package. This will make it easier to swap out synchronization primitives. For example, this will allow us to use primitives from github.com/sasha-s/go-deadlock to check for lock ordering violations. Updates #1472 PiperOrigin-RevId: 289033387
2019-10-19Merge release-20190806.1-294-g652f7b1 (automated)gVisor bot
2019-10-19Add support for pipes in VFS2.Kevin Krakauer
PiperOrigin-RevId: 275650307
2019-10-17Merge release-20190806.1-286-gdfdbdf1 (automated)gVisor bot
2019-10-17Refactor pipe to support VFS2.Kevin Krakauer
* Pulls common functionality (IO and locking on open) into pipe_util.go. * Adds pipe/vfs.go, which implements a subset of vfs.FileDescriptionImpl. A subsequent change will add support for pipes in memfs. PiperOrigin-RevId: 275322385
2019-10-16Reorder BUILD license and load functions in gvisor.Kevin Krakauer
PiperOrigin-RevId: 275139066
2019-10-08Merge release-20190806.1-246-g1de0cf3 (automated)gVisor bot
2019-10-07Remove unnecessary context parameter for new pipes.Kevin Krakauer
PiperOrigin-RevId: 273421634
2019-09-13Merge release-20190806.1-142-g7c6ab6a (automated)gVisor bot
2019-09-12Implement splice methods for pipes and sockets.Adin Scannell
This also allows the tee(2) implementation to be enabled, since dup can now be properly supported via WriteTo. Note that this change necessitated some minor restructoring with the fs.FileOperations splice methods. If the *fs.File is passed through directly, then only public API methods are accessible, which will deadlock immediately since the locking is already done by fs.Splice. Instead, we pass through an abstract io.Reader or io.Writer, which elide locks and use the underlying fs.FileOperations directly. PiperOrigin-RevId: 268805207
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 21:45:32 +0000