summaryrefslogtreecommitdiffhomepage
path: root/pkg/sentry/kernel/kernel.go
AgeCommit message (Collapse)Author
2019-08-08netstack: Don't start endpoint goroutines too soon on restore.Rahat Mahmood
Endpoint protocol goroutines were previously started as part of loading the endpoint. This is potentially too soon, as resources used by these goroutine may not have been loaded. Protocol goroutines may perform meaningful work as soon as they're started (ex: incoming connect) which can cause them to indirectly access resources that haven't been loaded yet. This CL defers resuming all protocol goroutines until the end of restore. PiperOrigin-RevId: 262409429
2019-08-02Remove kernel.mounts.Nicolas Lacasse
We can get the mount namespace from the CreateProcessArgs in all cases where we need it. This also gets rid of kernel.Destroy method, since the only thing it was doing was DecRefing the mounts. Removing the need to call kernel.SetRootMountNamespace also allowed for some more simplifications in the container fs setup code. PiperOrigin-RevId: 261357060
2019-07-31Initialize kernel.unimplementedSyscallEmitter with a sync.Once.Nicolas Lacasse
This is initialized lazily on the first unimplemented syscall. Without the sync.Once, this is racy. PiperOrigin-RevId: 260971758
2019-07-30Add feature to launch Sentry from an open host FD.Zach Koopmans
Adds feature to launch from an open host FD instead of a binary_path. The FD should point to a valid executable and most likely be statically compiled. If the executable is not statically compiled, the loader will search along the interpreter paths, which must be able to be resolved in the Sandbox's file system or start will fail. PiperOrigin-RevId: 260756825
2019-07-29Rate limit the unimplemented syscall event handler.Nicolas Lacasse
This introduces two new types of Emitters: 1. MultiEmitter, which will forward events to other registered Emitters, and 2. RateLimitedEmitter, which will forward events to a wrapped Emitter, subject to given rate limits. The methods in the eventchannel package itself act like a multiEmitter, but is not actually an Emitter. Now we have a DefaultEmitter, and the methods in eventchannel simply forward calls to the DefaultEmitter. The unimplemented syscall handler now uses a RateLimetedEmitter that wraps the DefaultEmitter. PiperOrigin-RevId: 260612770
2019-07-26Merge pull request #452 from zhangningdlut:chris_test_pidnsgVisor bot
PiperOrigin-RevId: 260220279
2019-07-24Use different pidns among different containerschris.zn
The different containers in a sandbox used only one pid namespace before. This results in that a container can see the processes in another container in the same sandbox. This patch use different pid namespace for different containers. Signed-off-by: chris.zn <chris.zn@antfin.com>
2019-07-02Remove map from fd_map, change to fd_table.Adin Scannell
This renames FDMap to FDTable and drops the kernel.FD type, which had an entire package to itself and didn't serve much use (it was freely cast between types, and served as more of an annoyance than providing any protection.) Based on BenchmarkFDLookupAndDecRef-12, we can expect 5-10 ns per lookup operation, and 10-15 ns per concurrent lookup operation of savings. This also fixes two tangential usage issues with the FDMap. Namely, non-atomic use of NewFDFrom and associated calls to Remove (that are both racy and fail to drop the reference on the underlying file.) PiperOrigin-RevId: 256285890
2019-06-27Fix various spelling issues in the documentationMichael Pratt
Addresses obvious typos, in the documentation only. COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/443 from Pixep:fix/documentation-spelling 4d0688164eafaf0b3010e5f4824b35d1e7176d65 PiperOrigin-RevId: 255477779
2019-06-19Add MountNamespace to task.Nicolas Lacasse
This allows tasks to have distinct mount namespace, instead of all sharing the kernel's root mount namespace. Currently, the only way for a task to get a different mount namespace than the kernel's root is by explicitly setting a different MountNamespace in CreateProcessArgs, and nothing does this (yet). In a follow-up CL, we will set CreateProcessArgs.MountNamespace when creating a new container inside runsc. Note that "MountNamespace" is a poor term for this thing. It's more like a distinct VFS tree. When we get around to adding real mount namespaces, this will need a better naem. PiperOrigin-RevId: 254009310
2019-06-13Update canonical repository.Adin Scannell
This can be merged after: https://github.com/google/gvisor-website/pull/77 or https://github.com/google/gvisor-website/pull/78 PiperOrigin-RevId: 253132620
2019-06-10Store more information in the kernel socket table.Rahat Mahmood
Store enough information in the kernel socket table to distinguish between different types of sockets. Previously we were only storing the socket family, but this isn't enough to classify sockets. For example, TCPv4 and UDPv4 sockets are both AF_INET, and ICMP sockets are SOCK_DGRAM sockets with a particular protocol. Instead of creating more sub-tables, flatten the socket table and provide a filtering mechanism based on the socket entry. Also generate and store a socket entry index ("sl" in linux) which allows us to output entries in a stable order from procfs. PiperOrigin-RevId: 252495895
2019-05-10Add pgalloc.DelayedEvictionManual.Jamie Liu
PiperOrigin-RevId: 247667272 Change-Id: I16b04e11bb93f50b7e05e888992303f730e4a877
2019-04-30Implement async MemoryFile eviction, and use it in CachingInodeOperations.Jamie Liu
This feature allows MemoryFile to delay eviction of "optional" allocations, such as unused cached file pages. Note that this incidentally makes CachingInodeOperations writeback asynchronous, in the sense that it doesn't occur until eviction; this is necessary because between when a cached page becomes evictable and when it's evicted, file writes (via CachingInodeOperations.Write) may dirty the page. As currently implemented, this feature won't meaningfully impact steady-state memory usage or caching; the reclaimer goroutine will schedule eviction as soon as it runs out of other work to do. Future CLs increase caching by adding constraints on when eviction is scheduled. PiperOrigin-RevId: 246014822 Change-Id: Ia85feb25a2de92a48359eb84434b6ec6f9bea2cb
2019-04-29Change copyright notice to "The gVisor Authors"Michael Pratt
Based on the guidelines at https://opensource.google.com/docs/releasing/authors/. 1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./' 2. Manual fixup of "Google Inc" references. 3. Add AUTHORS file. Authors may request to be added to this file. 4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS. Fixes #209 PiperOrigin-RevId: 245823212 Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
2019-04-25Perform explicit CPUID and FP state compatibility checks on restoreMichael Pratt
PiperOrigin-RevId: 245341004 Change-Id: Ic4d581039d034a8ae944b43e45e84eb2c3973657
2019-04-22Clean up state error handlingMichael Pratt
PiperOrigin-RevId: 244773836 Change-Id: I32223f79d2314fe1ac4ddfc63004fc22ff634adf
2019-04-17Use FD limit and file size limit from hostFabricio Voznika
FD limit and file size limit is read from the host, instead of using hard-coded defaults, given that they effect the sandbox process. Also limit the direct cache to use no more than half if the available FDs. PiperOrigin-RevId: 244050323 Change-Id: I787ad0fdf07c49d589e51aebfeae477324fe26e6
2019-04-10Fix uses of RootFromContext.Nicolas Lacasse
RootFromContext can return a dirent with reference taken, or nil. We must call DecRef if (and only if) a real dirent is returned. PiperOrigin-RevId: 242965515 Change-Id: Ie2b7b4cb19ee09b6ccf788b71f3fd7efcdf35a11
2019-04-10Start saving MountSource.DirentCache.Nicolas Lacasse
DirentCache is already a savable type, and it ensures that it is empty at the point of Save. There is no reason not to save it along with the MountSource. This did uncover an issue where not all MountSources were properly flushed before Save. If a mount point has an open file and is then unmounted, we save the MountSource without flushing it first. This CL also fixes that by flushing all MountSources for all open FDs on Save. PiperOrigin-RevId: 242906637 Change-Id: I3acd9d52b6ce6b8c989f835a408016cb3e67018f
2019-04-03Cache ThreadGroups in PIDNamespaceMichael Pratt
If there are thousands of threads, ThreadGroupsAppend becomes very expensive as it must iterate over all Tasks to find the ThreadGroup leaders. Reduce the cost by maintaining a map of ThreadGroups which can be used to grab them all directly. The one somewhat visible change is to convert PID namespace init children zapping to a group-directed SIGKILL, as Linux did in 82058d668465 "signal: Use group_send_sig_info to kill all processes in a pid namespace". In a benchmark that creates N threads which sleep for two minutes, we see approximately this much CPU time in ThreadGroupsAppend: Before: 1 thread: 0ms 1024 threads: 30ms - 9130ms 4096 threads: 50ms - 2000ms 8192 threads: 18160ms 16384 threads: 17210ms After: 1 thread: 0ms 1024 threads: 0ms 4096 threads: 0ms 8192 threads: 0ms 16384 threads: 0ms The profiling is actually extremely noisy (likely due to cache effects), as some runs show almost no samples at 1024, 4096 threads, but obviously this does not scale to lots of threads. PiperOrigin-RevId: 241828039 Change-Id: I17827c90045df4b3c49b3174f3a05bca3026a72c
2019-04-01Save/restore simple devices.Rahat Mahmood
We weren't saving simple devices' last allocated inode numbers, which caused inode number reuse across S/R. PiperOrigin-RevId: 241414245 Change-Id: I964289978841ef0a57d2fa48daf8eab7633c1284
2019-03-29Treat fsync errors during save as SaveRejection errors.Nicolas Lacasse
PiperOrigin-RevId: 241055485 Change-Id: I70259e9fef59bdf9733b35a2cd3319359449dd45
2019-03-29Treat ENOSPC as a state-file error during save.Nicolas Lacasse
PiperOrigin-RevId: 241028806 Change-Id: I770bf751a2740869a93c3ab50370a727ae580470
2019-03-14Decouple filemem from platform and move it to pgalloc.MemoryFile.Jamie Liu
This is in preparation for improved page cache reclaim, which requires greater integration between the page cache and page allocator. PiperOrigin-RevId: 238444706 Change-Id: Id24141b3678d96c7d7dc24baddd9be555bffafe4
2019-02-14Don't allow writing or reading to TTY unless process group is in foreground.Nicolas Lacasse
If a background process tries to read from a TTY, linux sends it a SIGTTIN unless the signal is blocked or ignored, or the process group is an orphan, in which case the syscall returns EIO. See drivers/tty/n_tty.c:n_tty_read()=>job_control(). If a background process tries to write a TTY, set the termios, or set the foreground process group, linux then sends a SIGTTOU. If the signal is ignored or blocked, linux allows the write. If the process group is an orphan, the syscall returns EIO. See drivers/tty/tty_io.c:tty_check_change(). PiperOrigin-RevId: 234044367 Change-Id: I009461352ac4f3f11c5d42c43ac36bb0caa580f9
2019-02-07Implement /proc/net/unix.Rahat Mahmood
PiperOrigin-RevId: 232948478 Change-Id: Ib830121e5e79afaf5d38d17aeef5a1ef97913d23
2019-01-08Improve loader related error messages returned to users.Brian Geffon
PiperOrigin-RevId: 228382827 Change-Id: Ica1d30e0df826bdd77f180a5092b2b735ea5c804
2018-12-04Max link traversals should be for an entire path.Brian Geffon
The number of symbolic links that are allowed to be followed are for a full path and not just a chain of symbolic links. PiperOrigin-RevId: 224047321 Change-Id: I5e3c4caf66a93c17eeddcc7f046d1e8bb9434a40
2018-10-20Add more unimplemented syscall eventsFabricio Voznika
Added events for *ctl syscalls that may have multiple different commands. For runsc, each syscall event is only logged once. For *ctl syscalls, use the cmd as identifier, not only the syscall number. PiperOrigin-RevId: 218015941 Change-Id: Ie3c19131ae36124861e9b492a7dbe1765d9e5e59
2018-10-19Use correct company name in copyright headerIan Gudger
PiperOrigin-RevId: 217951017 Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
2018-10-17Check thread group CPU timers in the CPU clock ticker.Jamie Liu
This reduces the number of goroutines and runtime timers when ITIMER_VIRTUAL or ITIMER_PROF are enabled, or when RLIMIT_CPU is set. This also ensures that thread group CPU timers only advance if running tasks are observed at the time the CPU clock advances, mostly eliminating the possibility that a CPU timer expiration observes no running tasks and falls back to the group leader. PiperOrigin-RevId: 217603396 Change-Id: Ia24ce934d5574334857d9afb5ad8ca0b6a6e65f4
2018-10-17runsc: Support job control signals for the root container.Nicolas Lacasse
Now containers run with "docker run -it" support control characters like ^C and ^Z. This required refactoring our signal handling a bit. Signals delivered to the "runsc boot" process are turned into loader.Signal calls with the appropriate delivery mode. Previously they were always sent directly to PID 1. PiperOrigin-RevId: 217566770 Change-Id: I5b7220d9a0f2b591a56335479454a200c6de8732
2018-10-15Merge host.endpoint into host.ConnectedEndpointIan Gudger
host.endpoint contained duplicated logic from the sockerpair implementation and host.ConnectedEndpoint. Remove host.endpoint in favor of a host.ConnectedEndpoint wrapped in a socketpair end. PiperOrigin-RevId: 217240096 Change-Id: I4a3d51e3fe82bdf30e2d0152458b8499ab4c987c
2018-10-08Implement shared futexes.Jamie Liu
- Shared futex objects on shared mappings are represented by Mappable + offset, analogous to Linux's use of inode + offset. Add type futex.Key, and change the futex.Manager bucket API to use futex.Keys instead of addresses. - Extend the futex.Checker interface to be able to return Keys for memory mappings. It returns Keys rather than just mappings because whether the address or the target of the mapping is used in the Key depends on whether the mapping is MAP_SHARED or MAP_PRIVATE; this matters because using mapping target for a futex on a MAP_PRIVATE mapping causes it to stop working across COW-breaking. - futex.Manager.WaitComplete depends on atomic updates to futex.Waiter.addr to determine when it has locked the right bucket, which is much less straightforward for struct futex.Waiter.key. Switch to an atomically-accessed futex.Waiter.bucket pointer. - futex.Manager.Wake now needs to take a futex.Checker to resolve addresses for shared futexes. CLONE_CHILD_CLEARTID requires the exit path to perform a shared futex wakeup (Linux: kernel/fork.c:mm_release() => sys_futex(tsk->clear_child_tid, FUTEX_WAKE, ...)). This is a problem because futexChecker is in the syscalls/linux package. Move it to kernel. PiperOrigin-RevId: 216207039 Change-Id: I708d68e2d1f47e526d9afd95e7fed410c84afccf
2018-09-27Implement 'runsc kill --all'Fabricio Voznika
In order to implement kill --all correctly, the Sentry needs to track all tasks that belong to a given container. This change introduces ContainerID to the task, that gets inherited by all children. 'kill --all' then iterates over all tasks comparing the ContainerID field to find all processes that need to be signalled. PiperOrigin-RevId: 214841768 Change-Id: I693b2374be8692d88cc441ef13a0ae34abf73ac6
2018-09-17runsc: Enable waiting on exited processes.Kevin Krakauer
This makes `runsc wait` behave more like waitpid()/wait4() in that: - Once a process has run to completion, you can wait on it and get its exit code. - Processes not waited on will consume memory (like a zombie process) PiperOrigin-RevId: 213358916 Change-Id: I5b5eca41ce71eea68e447380df8c38361a4d1558
2018-09-13Plumb monotonic time to netstackIan Gudger
Netstack needs to be portable, so this seems to be preferable to using raw system calls. PiperOrigin-RevId: 212917409 Change-Id: I7b2073e7db4b4bf75300717ca23aea4c15be944c
2018-09-07Use root abstract socket namespace for execFabricio Voznika
PiperOrigin-RevId: 211999211 Change-Id: I5968dd1a8313d3e49bb6e6614e130107495de41d
2018-09-06createProcessArgs.RootFromContext should return process Root if it exists.Nicolas Lacasse
It was always returning the MountNamespace root, which may be different from the process Root if the process is in a chroot environment. PiperOrigin-RevId: 211862181 Change-Id: I63bfeb610e2b0affa9fdbdd8147eba3c39014480
2018-08-31Disintegrate kernel.TaskResources.Jamie Liu
This allows us to call kernel.FDMap.DecRef without holding mutexes cleanly. PiperOrigin-RevId: 211139657 Change-Id: Ie59d5210fb9282e1950e2e40323df7264a01bcec
2018-08-23Implement POSIX per-process interval timers.Jamie Liu
PiperOrigin-RevId: 210021612 Change-Id: If7c161e6fd08cf17942bfb6bc5a8d2c4e271c61e
2018-08-15runsc fsgofer: Support dynamic serving of filesystems.Kevin Krakauer
When multiple containers run inside a sentry, each container has its own root filesystem and set of mounts. Containers are also added after sentry boot rather than all configured and known at boot time. The fsgofer needs to be able to serve the root filesystem of each container. Thus, it must be possible to add filesystems after the fsgofer has already started. This change: * Creates a URPC endpoint within the gofer process that listens for requests to serve new content. * Enables the sentry, when starting a new container, to add the new container's filesystem. * Mounts those new filesystems at separate roots within the sentry. PiperOrigin-RevId: 208903248 Change-Id: Ifa91ec9c8caf5f2f0a9eead83c4a57090ce92068
2018-08-02Automated rollback of changelist 207037226Zhaozhong Ni
PiperOrigin-RevId: 207125440 Change-Id: I6c572afb4d693ee72a0c458a988b0e96d191cd49
2018-08-01Automated rollback of changelist 207007153Michael Pratt
PiperOrigin-RevId: 207037226 Change-Id: I8b5f1a056d4f3eab17846f2e0193bb737ecb5428
2018-08-01stateify: convert all packages to use explicit mode.Zhaozhong Ni
PiperOrigin-RevId: 207007153 Change-Id: Ifedf1cc3758dc18be16647a4ece9c840c1c636c9
2018-07-10netstack: tcp socket connected state S/R support.Zhaozhong Ni
PiperOrigin-RevId: 203958972 Change-Id: Ia6fe16547539296d48e2c6731edacdd96bd6e93c
2018-06-26Automated rollback of changelist 201596247Brian Geffon
PiperOrigin-RevId: 202151720 Change-Id: I0491172c436bbb32b977f557953ba0bc41cfe299
2018-06-21netstack: tcp socket connected state S/R support.Zhaozhong Ni
PiperOrigin-RevId: 201596247 Change-Id: Id22f47b2cdcbe14aa0d930f7807ba75f91a56724
2018-06-21Drop return from SendExternalSignalMichael Pratt
SendExternalSignal is no longer called before CreateProcess, so it can enforce this simplified precondition. StartForwarding, and after Kernel.Start. PiperOrigin-RevId: 201591170 Change-Id: Ib7022ef7895612d7d82a00942ab59fa433c4d6e9
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 09:27:34 +0000