Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 346923826
|
|
Don't propagate arbitrary golang errors up from fusefs because errors
that don't map to an errno result in a sentry panic.
Reported-by: syzbot+697cb635346e456fddfc@syzkaller.appspotmail.com
PiperOrigin-RevId: 346220306
|
|
Fixes #4991
PiperOrigin-RevId: 345800333
|
|
These options allow overriding the signal that gets sent to the process when
I/O operations are available on the file descriptor, rather than the default
`SIGIO` signal. Doing so also populates `siginfo` to contain extra information
about which file descriptor caused the event (`si_fd`) and what events happened
on it (`si_band`). The logic around which FD is populated within `si_fd`
matches Linux's, which means it has some weird edge cases where that value may
not actually refer to a file descriptor that is still valid.
This CL also ports extra S/R logic regarding async handler in VFS2.
Without this, async I/O handlers aren't properly re-registered after S/R.
PiperOrigin-RevId: 345436598
|
|
Previous experience has shown that these types of wrappers tends to create two
kinds of problems: hidden allocations (e.g. each call to
FileReadWriteSeeker.Read/Write allocates a usermem.BytesIO on the heap) and
hidden lock ordering problems (e.g. VFS1 splice deadlocks). Since this is only
needed by fsimpl/verity, move it there.
PiperOrigin-RevId: 345377830
|
|
Refactor some utilities and rename some others for clarity.
PiperOrigin-RevId: 345247836
|
|
PiperOrigin-RevId: 345178956
|
|
The bug has been fixed.
PiperOrigin-RevId: 344088206
|
|
PiperOrigin-RevId: 343959348
|
|
1. Add getD/getDentry methods to avoid long casting line in each test
2. Factor all calls to vfs.OpenAt/UnlinkAt/RenameAt on lower filesystem
to their own method (for both lower file and lower Merkle file) so
the tests are more readable
3. Add descriptive test names for delete/remove tests
PiperOrigin-RevId: 343540202
|
|
PiperOrigin-RevId: 343398191
|
|
If a kernfs user does not cache dentries, then cacheLocked will destroy the
dentry. The current DecRef implementation will be racy in this case as the
following can happen:
- Goroutine 1 calls DecRef and decreases ref count from 1 to 0.
- Goroutine 2 acquires d.fs.mu for reading and calls IncRef and increasing the
ref count from 0 to 1.
- Goroutine 2 releases d.fs.mu and calls DecRef again decreasing ref count from
1 to 0.
- Goroutine 1 now acquires d.fs.mu and calls cacheLocked which destroys the
dentry.
- Goroutine 2 now acquires d.fs.mu and calls cacheLocked to find that the dentry
is already destroyed!
Earlier we would panic in this case, we could instead just return instead of
adding complexity to handle this race. This is similar to what the gofer client
does.
We do not want to lock d.fs.mu in the case that the filesystem caches dentries
(common case as procfs and sysfs do this) to prevent congestion due to lock
contention.
PiperOrigin-RevId: 343229496
|
|
PiperOrigin-RevId: 343196927
|
|
PiperOrigin-RevId: 342992936
|
|
If we don't hold a reference, the dentry can be destroyed by another thread.
Reported-by: syzbot+f2132e50060c41f6d41f@syzkaller.appspotmail.com
PiperOrigin-RevId: 342951940
|
|
Also add the lock order for verity fs, and add a lock to protect dentry
hash.
PiperOrigin-RevId: 342946537
|
|
This is actually just b/168751672 again; cl/332394146 was incorrectly reverted
by cl/341411151. Document the reference holder to reduce the likelihood that
this happens again.
Also document a few other bugs observed in the process.
PiperOrigin-RevId: 342339144
|
|
PiperOrigin-RevId: 342221309
|
|
PiperOrigin-RevId: 342214859
|
|
kernel.Task can only be used as context.Context by that Task's task goroutine.
This is violated in at least two places:
- In any case where one thread accesses the /proc/[tid] of any other thread,
passing the kernel.Task for [tid] as the context.Context is incorrect.
- Task.rebuildTraceContext() may be called by Kernel.RebuildTraceContexts()
outside the scope of any task goroutine.
Fix these (as well as a data race on Task.traceContext discovered during the
course of finding the latter).
PiperOrigin-RevId: 342174404
|
|
children names map can be used to verify whether a child is expected
during walking, so that we can detect unexpected modifications that
deleted/renamed both the target file and the corresponding merkle tree
file.
PiperOrigin-RevId: 342170715
|
|
This reduces confusion with context.Context (which is also relevant to
kernel.Tasks) and is consistent with existing function kernel.LoadTaskImage().
PiperOrigin-RevId: 342167298
|
|
PiperOrigin-RevId: 342161204
|
|
PiperOrigin-RevId: 341982672
|
|
This will help to debug:
https://syzkaller.appspot.com/bug?id=0d717bd7028dceeb4b38f09aab2841c398b41d81
PiperOrigin-RevId: 341458715
|
|
This lets us avoid treating a value of 0 as one reference. All references
using the refsvfs2 template must call InitRefs() before the reference is
incremented/decremented, or else a panic will occur. Therefore, it should be
pretty easy to identify missing InitRef calls during testing.
Updates #1486.
PiperOrigin-RevId: 341411151
|
|
This is necessary to allow writes to files opened with O_WRONLY to go through
host FDs.
PiperOrigin-RevId: 341174509
|
|
This is consistent with what Linux does. This was causing a PHP runtime test
failure. Fixed it for VFS2.
PiperOrigin-RevId: 341155209
|
|
We can reuse information about whether a whiteout exists on a given file path
from stepLocked when creating a file at that path. This helps save an Unlink
call to the upper filesystem if the whiteout does NOT exist (common case).
Plumbs this information from lookupLocked() -> getChildLocked() -> stepLocked().
This also helped save a Lookup in RenameAt().
Fixes #1199
PiperOrigin-RevId: 341105351
|
|
The root dentry was not created through Inode.Lookup, so we should not
release a reference even if inode.Keep() is true.
PiperOrigin-RevId: 341103220
|
|
PiperOrigin-RevId: 340536306
|
|
The default pipe size already matched linux, and is unchanged.
Furthermore `atomicIOBytes` is made a proper constant (as it is in Linux). We
were plumbing usermem.PageSize everywhere, so this is no functional change.
PiperOrigin-RevId: 340497006
|
|
Don't return the filename, since it can already be determined by the caller.
This was causing a panic in RenameAt, which relied on the name to be nonempty
even if the error was EEXIST.
Reported-by: syzbot+e9f117d000301e42361f@syzkaller.appspotmail.com
PiperOrigin-RevId: 340381946
|
|
PiperOrigin-RevId: 340275942
|
|
Read-only directories (e.g. under /sys, /proc) should return EPERM for rename.
PiperOrigin-RevId: 339979022
|
|
The non-errno error was causing panics before.
PiperOrigin-RevId: 339969348
|
|
Updates #1486.
PiperOrigin-RevId: 339581879
|
|
Also refactor the template and CheckedObject interface to make this cleaner.
Updates #1486.
PiperOrigin-RevId: 339577120
|
|
Updates #1199
PiperOrigin-RevId: 339528827
|
|
PiperOrigin-RevId: 339505487
|
|
PiperOrigin-RevId: 339377254
|
|
This PR implements /proc/[pid]/mem for `pkg/sentry/fs` (refer to #2716) and `pkg/sentry/fsimpl`.
@majek
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/4060 from lnsp:proc-pid-mem 2caf9021254646f441be618a9bb5528610e44d43
PiperOrigin-RevId: 339369629
|
|
In VFS1's overlayfs, files use the device and inode number of the lower layer
inode if one exists, and the upper layer inode otherwise. The former behavior
is inefficient (requiring lower layer lookups even if the file exists and is
otherwise wholly determined by the upper layer), and somewhat dangerous if the
lower layer is also observable (since both the overlay and lower layer file
will have the same device and inode numbers and thus appear to be the same
file, despite being behaviorally different). VFS2 overlayfs imitates Linux
overlayfs (in its default configuration) instead; it always uses the inode
number from the originating layer, but synthesizes a unique device number for
directories and another device number for non-directory files that have not
been copied-up.
As it turns out, the latter is insufficient (in VFS2, and possibly Linux as
well), because a given layer may include files with different device numbers.
If two distinct files on such a layer have device number X and Y respectively,
but share inode number Z, then the overlay will map both files to some private
device number X' and inode number Z, potentially confusing applications. Fix
this by assigning synthetic device numbers based on the lower layer's device
number, rather than the lower layer's vfs.Filesystem.
PiperOrigin-RevId: 339300341
|
|
Also change verity test to use a context with an active task. This is
required to delete/rename the file in the underlying file system.
PiperOrigin-RevId: 339146445
|
|
Much like the VFS2 gofer client, kernfs too now caches dentries. The size of the
LRU cache is configurable via mount options.
Have adopted the same reference semantics from gofer client dentry.
Only sysfs and procfs use this LRU cache. The rest of the kernfs users (devpts,
fusefs, host, pipefs, sockfs) still use the no cache approach.
PiperOrigin-RevId: 339139835
|
|
PiperOrigin-RevId: 338847417
|
|
Updates #1486.
PiperOrigin-RevId: 338832085
|
|
PiperOrigin-RevId: 338798433
|
|
Inode number consistency checks are now skipped in save/restore tests for
reasons described in greatest detail in StatTest.StateDoesntChangeAfterRename.
They pass in VFS1 due to the bug described in new test case
SimpleStatTest.DifferentFilesHaveDifferentDeviceInodeNumberPairs.
Fixes #1663
PiperOrigin-RevId: 338776148
|
|
PiperOrigin-RevId: 338728070
|