Age | Commit message (Collapse) | Author |
|
Closes #1195
PiperOrigin-RevId: 300867055
|
|
- Make oomScoreAdj a ThreadGroup field (Linux: signal_struct::oom_score_adj).
- Avoid deadlock caused by Task.OOMScoreAdj()/SetOOMScoreAdj() locking Task.mu
and TaskSet.mu in the wrong order (via Task.ExitState()).
PiperOrigin-RevId: 300814698
|
|
Note that the raw faccessat system call does not actually take a flags argument;
according to faccessat(2), the glibc wrapper implements the flags by using
fstatat(2). Remove the flag argument that we try to extract from vfs1, which
would just be a garbage value.
Updates #1965
Fixes #2101
PiperOrigin-RevId: 300796067
|
|
Issue #1833
PiperOrigin-RevId: 299998105
|
|
In VFS2, imported file descriptors are stored in a kernfs-based filesystem.
Upon calling ImportFD, the host fd can be accessed in two ways:
1. a FileDescription that can be added to the FDTable, and
2. a Dentry in the host.filesystem mount, which we will want to access through
magic symlinks in /proc/[pid]/fd/.
An implementation of the kernfs.Inode interface stores a unique host fd. This
inode can be inserted into file descriptions as well as dentries.
This change also plumbs in three FileDescriptionImpls corresponding to fds for
sockets, TTYs, and other files (only the latter is implemented here).
These implementations will mostly make corresponding syscalls to the host.
Where possible, the logic is ported over from pkg/sentry/fs/host.
Updates #1672
PiperOrigin-RevId: 299417263
|
|
Adds an oom_score_adj and oom_score proc file stub. oom_score_adj accepts
writes of values -1000 to 1000 and persists the value with the task. New tasks
inherit the parent's oom_score_adj.
oom_score is a read-only stub that always returns the value '0'.
Issue #202
PiperOrigin-RevId: 299245355
|
|
gofer.dentryReadWriter.WriteFromBlocks was not updating
gofer.dentry.size after a write operation that skips the
cache.
Updates #1198
PiperOrigin-RevId: 298708646
|
|
We changed syscalls to allow dup3 for ARM64.
Updates #1198
PiperOrigin-RevId: 297870816
|
|
pipe and pipe2 aren't ported, pending a slight rework of pipe FDs for VFS2.
mount and umount2 aren't ported out of temporary laziness. access and faccessat
need additional FSImpl methods to implement properly, but are stubbed to
prevent googletest from CHECK-failing. Other syscalls require additional
plumbing.
Updates #1623
PiperOrigin-RevId: 297188448
|
|
TCP/IP will work with netstack networking. hostinet doesn't work, and sockets
will have the same behavior as it is now.
Before the userspace is able to create device, the default loopback device can
be used to test.
/proc/net and /sys/net will still be connected to the root network stack; this
is the same behavior now.
Issue #1833
PiperOrigin-RevId: 296309389
|
|
tmpfs.fileDescription now implements ConfigureMMap. And tmpfs.regularFile
implement memmap.Mappable. The methods are mostly unchanged from VFS1 tmpfs.
PiperOrigin-RevId: 296234557
|
|
This is easier than storing errors from e.g. CopyOut in the callback.
PiperOrigin-RevId: 295230021
|
|
This saves one pointer dereference per VFS access.
Updates #1623
PiperOrigin-RevId: 295216176
|
|
- Added fsbridge package with interface that can be used to open
and read from VFS1 and VFS2 files.
- Converted ELF loader to use fsbridge
- Added VFS2 types to FSContext
- Added vfs.MountNamespace to ThreadGroup
Updates #1623
PiperOrigin-RevId: 295183950
|
|
This allow callers to say whether the file is being
opened to be executed, so that the proper checks can
be done from FilesystemImpl.OpenAt()
Updates #1623
PiperOrigin-RevId: 295042595
|
|
Fixes #1812. (The more direct cause of the deadlock is panic unsafety because
the historically high cost of defer means that we avoid it in hot paths,
including much of MM; defer is much cheaper as of Go 1.14, but still a
measurable overhead.)
PiperOrigin-RevId: 294560316
|
|
PiperOrigin-RevId: 294289066
|
|
PiperOrigin-RevId: 294285723
|
|
PiperOrigin-RevId: 294272755
|
|
Updates #1035
PiperOrigin-RevId: 293194631
|
|
Updates #1198
Opening host pipes (by spinning in fdpipe) and host sockets is not yet
complete, and will be done in a future CL.
Major differences from VFS1 gofer client (sentry/fs/gofer), with varying levels
of backportability:
- "Cache policies" are replaced by InteropMode, which control the behavior of
timestamps in addition to caching. Under InteropModeExclusive (analogous to
cacheAll) and InteropModeWritethrough (analogous to cacheAllWritethrough),
client timestamps are *not* written back to the server (it is not possible in
9P or Linux for clients to set ctime, so writing back client-authoritative
timestamps results in incoherence between atime/mtime and ctime). Under
InteropModeShared (analogous to cacheRemoteRevalidating), client timestamps
are not used at all (remote filesystem clocks are authoritative). cacheNone
is translated to InteropModeShared + new option
filesystemOptions.specialRegularFiles.
- Under InteropModeShared, "unstable attribute" reloading for permission
checks, lookup, and revalidation are fused, which is feasible in VFS2 since
gofer.filesystem controls path resolution. This results in a ~33% reduction
in RPCs for filesystem operations compared to cacheRemoteRevalidating. For
example, consider stat("/foo/bar/baz") where "/foo/bar/baz" fails
revalidation, resulting in the instantiation of a new dentry:
VFS1 RPCs:
getattr("/") // fs.MountNamespace.FindLink() => fs.Inode.CheckPermission() => gofer.inodeOperations.check() => gofer.inodeOperations.UnstableAttr()
walkgetattr("/", "foo") = fid1 // fs.Dirent.walk() => gofer.session.Revalidate() => gofer.cachePolicy.Revalidate()
clunk(fid1)
getattr("/foo") // CheckPermission
walkgetattr("/foo", "bar") = fid2 // Revalidate
clunk(fid2)
getattr("/foo/bar") // CheckPermission
walkgetattr("/foo/bar", "baz") = fid3 // Revalidate
clunk(fid3)
walkgetattr("/foo/bar", "baz") = fid4 // fs.Dirent.walk() => gofer.inodeOperations.Lookup
getattr("/foo/bar/baz") // linux.stat() => gofer.inodeOperations.UnstableAttr()
VFS2 RPCs:
getattr("/") // gofer.filesystem.walkExistingLocked()
walkgetattr("/", "foo") = fid1 // gofer.filesystem.stepExistingLocked()
clunk(fid1)
// No getattr: walkgetattr already updated metadata for permission check
walkgetattr("/foo", "bar") = fid2
clunk(fid2)
walkgetattr("/foo/bar", "baz") = fid3
// No clunk: fid3 used for new gofer.dentry
// No getattr: walkgetattr already updated metadata for stat()
- gofer.filesystem.unlinkAt() does not require instantiation of a dentry that
represents the file to be deleted. Updates #898.
- gofer.regularFileFD.OnClose() skips Tflushf for regular files under
InteropModeExclusive, as it's nonsensical to request a remote file flush
without flushing locally-buffered writes to that remote file first.
- Symlink targets are cached when InteropModeShared is not in effect.
- p9.QID.Path (which is already required to be unique for each file within a
server, and is accordingly already synthesized from device/inode numbers in
all known gofers) is used as-is for inode numbers, rather than being mapped
along with attr.RDev in the client to yet another synthetic inode number.
- Relevant parts of fsutil.CachingInodeOperations are inlined directly into
gofer package code. This avoids having to duplicate part of its functionality
in fsutil.HostMappable.
PiperOrigin-RevId: 293190213
|
|
Add a file lock implementation that can be embedded into various filesystem
implementations.
Updates #1480
PiperOrigin-RevId: 292614758
|
|
WritableSource is a convenience interface used for files that can
be written to, e.g. /proc/net/ipv4/tpc_sack. It reads max of 4KB
and only from offset 0 which should cover most cases. It can be
extended as neeed.
Updates #1195
PiperOrigin-RevId: 292056924
|
|
PiperOrigin-RevId: 292021389
|
|
Because the abi will depend on the core types for marshalling (usermem,
context, safemem, safecopy), these need to be flattened from the sentry
directory. These packages contain no sentry-specific details.
PiperOrigin-RevId: 291811289
|
|
PiperOrigin-RevId: 291745021
|
|
PiperOrigin-RevId: 291471892
|
|
PiperOrigin-RevId: 291041576
|
|
PiperOrigin-RevId: 291006713
|
|
PiperOrigin-RevId: 290822487
|
|
Some files were missing the last line break.
PiperOrigin-RevId: 290808898
|
|
Updates #1195
PiperOrigin-RevId: 290298266
|
|
Updates #1195
PiperOrigin-RevId: 290285420
|
|
This is similar to 'Truncate' in vfs1.
Updates https://github.com/google/gvisor/issues/1197
PiperOrigin-RevId: 290139140
|
|
Files not implemented require VFSv2 plumbing into the kernel.
Also, cgroup is not implemented yet.
Updates #1195
PiperOrigin-RevId: 290129176
|
|
Except for one under /proc/sys/net/ipv4/tcp_sack.
/proc/pid/* is still incomplete.
Updates #1195
PiperOrigin-RevId: 290120438
|
|
PiperOrigin-RevId: 289962040
|
|
* Rename syncutil to sync.
* Add aliases to sync types.
* Replace existing usage of standard library sync package.
This will make it easier to swap out synchronization primitives. For example,
this will allow us to use primitives from github.com/sasha-s/go-deadlock to
check for lock ordering violations.
Updates #1472
PiperOrigin-RevId: 289033387
|
|
PiperOrigin-RevId: 288799694
|
|
Updates #1195
PiperOrigin-RevId: 288725745
|
|
- Renamed memfs to tmpfs.
- Copied fileRangeSet bits from fs/fsutil/ to fsimpl/tmpfs/
- Changed tmpfs to be backed by filemem instead of byte slice.
- regularFileReadWriter uses a sync.Pool, similar to gofer client.
PiperOrigin-RevId: 288356380
|
|
- Add FileDescriptionOptions.UseDentryMetadata, which reduces the amount of
boilerplate needed for device FDs and the like between filesystems.
- Switch back to having FileDescription.Init() take references on the Mount and
Dentry; otherwise managing refcounts around failed calls to
OpenDeviceSpecialFile() / Device.Open() is tricky.
PiperOrigin-RevId: 287575574
|
|
Updates #1195
PiperOrigin-RevId: 287269106
|
|
Updates #1195
PiperOrigin-RevId: 287227722
|
|
It was calling Dentry.InsertChild with the dentry's mutex
already locked.
Updates #1035
PiperOrigin-RevId: 286962742
|
|
- Make FilesystemImpl methods that operate on parent directories require
!rp.Done() (i.e. there is at least one path component to resolve) as
precondition and postcondition (in cases where they do not finish path
resolution due to mount boundary / absolute symlink), and require that they
do not need to follow the last path component (the file being created /
deleted) as a symlink. Check for these in VFS.
- Add FilesystemImpl.GetParentDentryAt(), which is required to obtain the old
parent directory for VFS.RenameAt(). (Passing the Dentry to be renamed
instead has the wrong semantics if the file named by the old path is a mount
point since the Dentry will be on the wrong Mount.)
- Update memfs to implement these methods correctly (?), including RenameAt.
- Change fspath.Parse() to allow empty paths (to simplify implementation of
AT_EMPTY_PATH).
- Change vfs.PathOperation to take a fspath.Path instead of a raw pathname;
non-test callers will need to fspath.Parse() pathnames themselves anyway in
order to detect absolute paths and select PathOperation.Start accordingly.
PiperOrigin-RevId: 286934941
|
|
PiperOrigin-RevId: 286616668
|
|
PiperOrigin-RevId: 286281274
|
|
PiperOrigin-RevId: 286248378
|
|
PiperOrigin-RevId: 285231002
|