| Age | Commit message (Collapse) | Author |
|---|
|
|
|
PiperOrigin-RevId: 319283715
|
|
|
|
Updates #2923.
PiperOrigin-RevId: 318648128
|
|
|
|
- Support writing on proc/[pid]/{uid,gid}map
- Return EIO for writing to static files.
Updates #2923.
PiperOrigin-RevId: 318188503
|
|
|
|
|
|
Also refactor HandleDeletion().
Updates #1479.
PiperOrigin-RevId: 317989000
|
|
|
|
Because there is no inode structure stored in the sandbox, inotify watches
must be held on the dentry. This would be an issue in the presence of hard
links, where multiple dentries would need to share the same set of watches,
but in VFS2, we do not support the internal creation of hard links on gofer
fs. As a result, we make the assumption that every dentry corresponds to a
unique inode.
Furthermore, dentries can be cached and then evicted, even if the underlying
file has not be deleted. We must prevent this from occurring if there are any
watches that would be lost. Note that if the dentry was deleted or invalidated
(d.vfsd.IsDead()), we should still destroy it along with its watches.
Additionally, when a dentry’s last watch is removed, we cache it if it also
has zero references. This way, the dentry can eventually be evicted from
memory if it is no longer needed. This is accomplished with a new dentry
method, OnZeroWatches(), which is called by Inotify.RmWatch and
Inotify.Release. Note that it must be called after all inotify locks are
released to avoid violating lock order. Stress tests are added to make sure
that inotify operations don't deadlock with gofer.OnZeroWatches.
Updates #1479.
PiperOrigin-RevId: 317958034
|
|
|
|
Make proc/self/fd iteration work properly. Also, the comment on
kernfs.Inode.IterDirents did not accurately reflect how parameters should be
used/were used in kernfs.Inode impls other than fdDir.
Updates #2923.
PiperOrigin-RevId: 317370325
|
|
|
|
- Change FileDescriptionImpl Lock/UnlockPOSIX signature to
take {start,length,whence}, so the correct offset can be
calculated in the implementations.
- Create PosixLocker interface to make it possible to share
the same locking code from different implementations.
Closes #1480
PiperOrigin-RevId: 316910286
|
|
|
|
Major differences from existing overlay filesystems:
- Linux allows lower layers in an overlay to require revalidation, but not the
upper layer. VFS1 allows the upper layer in an overlay to require
revalidation, but not the lower layer. VFS2 does not allow any layers to
require revalidation. (Now that vfs.MkdirOptions.ForSyntheticMountpoint
exists, no uses of overlay in VFS1 are believed to require upper layer
revalidation; in particular, the requirement that the upper layer support the
creation of "trusted." extended attributes for whiteouts effectively required
the upper filesystem to be tmpfs in most cases.)
- Like VFS1, but unlike Linux, VFS2 overlay does not attempt to make mutations
of the upper layer atomic using a working directory and features like
RENAME_WHITEOUT. (This may change in the future, since not having a working
directory makes error recovery for some operations, e.g. rmdir, particularly
painful.)
- Like Linux, but unlike VFS1, VFS2 represents whiteouts using character
devices with rdev == 0; the equivalent of the whiteout attribute on
directories is xattr trusted.overlay.opaque = "y"; and there is no equivalent
to the whiteout attribute on non-directories since non-directories are never
merged with lower layers.
- Device and inode numbers work as follows:
- In Linux, modulo the xino feature and a special case for when all layers
are the same filesystem:
- Directories use the overlay filesystem's device number and an
ephemeral inode number assigned by the overlay.
- Non-directories that have been copied up use the device and inode
number assigned by the upper filesystem.
- Non-directories that have not been copied up use a per-(overlay,
layer)-pair device number and the inode number assigned by the lower
filesystem.
- In VFS1, device and inode numbers always come from the lower layer unless
"whited out"; this has the adverse effect of requiring interaction with
the lower filesystem even for non-directory files that exist on the upper
layer.
- In VFS2, device and inode numbers are assigned as in Linux, except that
xino and the samefs special case are not supported.
- Like Linux, but unlike VFS1, VFS2 does not attempt to maintain memory mapping
coherence across copy-up. (This may have to change in the future, as users
may be dependent on this property.)
- Like Linux, but unlike VFS1, VFS2 uses the overlayfs mounter's credentials
when interacting with the overlay's layers, rather than the caller's.
- Like Linux, but unlike VFS1, VFS2 permits multiple lower layers in an
overlay.
- Like Linux, but unlike VFS1, VFS2's overlay filesystem is
application-mountable.
Updates #1199
PiperOrigin-RevId: 316019067
|
|
|
|
LockFD is the generic implementation that can be embedded in
FileDescriptionImpl implementations. Unique lock ID is
maintained in vfs.FileDescription and is created on demand.
Updates #1480
PiperOrigin-RevId: 315604825
|
|
|
|
|
|
Limited to tmpfs. Inotify support in other filesystem implementations to
follow.
Updates #1479
PiperOrigin-RevId: 313828648
|
|
|
|
PiperOrigin-RevId: 313817646
|
|
|
|
Support in other filesystem impls is still needed. Unlike in Linux and vfs1, we
need to plumb inotify down to each filesystem implementation in order to keep
track of links/inode structures properly.
IN_EXCL_UNLINK still needs to be implemented, as well as a few inotify hooks
that are not present in either vfs1 or vfs2. Those will be addressed in
subsequent changes.
Updates #1479.
PiperOrigin-RevId: 313781995
|
|
|
|
|
|
Updates #1197, #1198, #1672
PiperOrigin-RevId: 310432006
|
|
|
|
Implement PrependPath() in host.filesystem to correctly format
name for host files.
Updates #1672
PiperOrigin-RevId: 309959135
|
|
|
|
This allows for kerfs.Filesystem to be overridden by
different implementations.
Updates #1672
PiperOrigin-RevId: 309809321
|
|
|
|
Enforce write permission checks in BoundEndpointAt, which corresponds to the
permission checks in Linux (net/unix/af_unix.c:unix_find_other).
Also, create bound socket files with the correct permissions in VFS2.
Fixes #2324.
PiperOrigin-RevId: 308949084
|
|
|
|
Named pipes and sockets can be represented in two ways in gofer fs:
1. As a file on the remote filesystem. In this case, all file operations are
passed through 9p.
2. As a synthetic file that is internal to the sandbox. In this case, the
dentry stores an endpoint or VFSPipe for sockets and pipes respectively,
which replaces interactions with the remote fs through the gofer.
In gofer.filesystem.MknodAt, we attempt to call mknod(2) through 9p,
and if it fails, fall back to the synthetic version.
Updates #1200.
PiperOrigin-RevId: 308828161
|
|
|
|
PiperOrigin-RevId: 308304793
|
|
|
|
- Return ENOENT for /proc/[pid]/task if task is zoombied or terminated
- Allow directory to be Seek() to the end
- Construct synthetic files for /proc/[pid]/ns/*
- Changed GenericDirectoryFD.Init to not register with FileDescription,
otherwise other implementation cannot change behavior.
Updates #1195,1193
PiperOrigin-RevId: 308294649
|
|
|
|
PiperOrigin-RevId: 308164359
|
|
|
|
- Fix defer operation ordering in kernfs.Filesystem.AccessAt()
- Add AT_NULL entry in proc/pid/auvx
- Fix line padding in /proc/pid/maps
- Fix linux_dirent serialization for getdents(2)
- Remove file creation flags from vfs.FileDescription.statusFlags()
Updates #1193, #1035
PiperOrigin-RevId: 307704159
|
|
|
|
This change:
- Drastically simplifies the synchronization model: filesystem structure is
both implementation-defined and implementation-synchronized.
- Allows implementations of vfs.DentryImpl to use implementation-specific
dentry types, reducing casts during path traversal.
- Doesn't require dentries representing non-directory files to waste space on a
map of children.
- Allows dentry revalidation and mount lookup to be correctly ordered (fixed
FIXME in fsimpl/gofer/filesystem.go).
- Removes the need to have two separate maps in gofer.dentry
(dentry.vfsd.children and dentry.negativeChildren) for positive and negative
lookups respectively.
//pkg/sentry/fsimpl/tmpfs/benchmark_test.go:
name old time/op new time/op delta
VFS2TmpfsStat/1-112 172ns ± 4% 165ns ± 3% -4.08% (p=0.002 n=9+9)
VFS2TmpfsStat/2-112 199ns ± 3% 195ns ±10% ~ (p=0.132 n=8+9)
VFS2TmpfsStat/3-112 230ns ± 2% 216ns ± 2% -6.15% (p=0.000 n=8+8)
VFS2TmpfsStat/8-112 390ns ± 2% 358ns ± 4% -8.33% (p=0.000 n=9+8)
VFS2TmpfsStat/64-112 2.20µs ± 3% 2.01µs ± 3% -8.48% (p=0.000 n=10+8)
VFS2TmpfsStat/100-112 3.42µs ± 9% 3.08µs ± 2% -9.82% (p=0.000 n=9+8)
VFS2TmpfsMountStat/1-112 278ns ± 1% 286ns ±15% ~ (p=0.712 n=8+10)
VFS2TmpfsMountStat/2-112 311ns ± 4% 298ns ± 2% -4.27% (p=0.000 n=9+8)
VFS2TmpfsMountStat/3-112 339ns ± 3% 330ns ± 9% ~ (p=0.070 n=8+9)
VFS2TmpfsMountStat/8-112 503ns ± 3% 466ns ± 3% -7.38% (p=0.000 n=8+8)
VFS2TmpfsMountStat/64-112 2.53µs ±16% 2.17µs ± 7% -14.19% (p=0.000 n=10+9)
VFS2TmpfsMountStat/100-112 3.60µs ± 4% 3.30µs ± 8% -8.33% (p=0.001 n=8+9)
Updates #1035
PiperOrigin-RevId: 307655892
|
|
|
|
As in VFS1, we only support the user.* namespace. Plumbing is added to tmpfs
and goferfs.
Note that because of the slightly different order of checks between VFS2 and
Linux, one of the xattr tests needs to be relaxed slightly.
Fixes #2363.
PiperOrigin-RevId: 305985121
|
|
|
