summaryrefslogtreecommitdiffhomepage
path: root/pkg/sentry/fs
AgeCommit message (Collapse)Author
2019-08-01tmpfs and ramfs Dirs should drop references on children in Release().Nicolas Lacasse
This is the source of many warnings like: AtomicRefCount 0x7f5ff84e3500 owned by "fs.Inode" garbage collected with ref count of 1 (want 0) PiperOrigin-RevId: 261197093
2019-07-30Cache pages in CachingInodeOperations.Read when memory evictions are delayed.Jamie Liu
PiperOrigin-RevId: 260851452
2019-07-30ext: Migrate from using fileReader custom interface to using io.Reader.Ayush Ranjan
It gets rid of holding state of the io.Reader offset (which is anyways held by the vfs.FileDescriptor struct. It is also odd using a io.Reader becuase we using io.ReaderAt to interact with the device. So making a io.ReaderAt wrapper makes more sense. Most importantly, it gets rid of the complexity of extracting the file reader from a regular file implementation and then using it. Now we can just use the regular file implementation as a reader which is more intuitive. PiperOrigin-RevId: 260846927
2019-07-30ext: block map file reader implementation.Ayush Ranjan
Also adds stress tests for block map reader and intensifies extent reader tests. PiperOrigin-RevId: 260838177
2019-07-30Add feature to launch Sentry from an open host FD.Zach Koopmans
Adds feature to launch from an open host FD instead of a binary_path. The FD should point to a valid executable and most likely be statically compiled. If the executable is not statically compiled, the loader will search along the interpreter paths, which must be able to be resolved in the Sandbox's file system or start will fail. PiperOrigin-RevId: 260756825
2019-07-29Migrate from using io.ReadSeeker to io.ReaderAt.Ayush Ranjan
This provides the following benefits: - We can now use pkg/fd package which does not take ownership of the file descriptor. So it does not close the fd when garbage collected. This reduces scope of errors from unexpected garbage collection of io.File. - It enforces the offset parameter in every read call. It does not affect the fd offset nor is it affected by it. Hence reducing scope of error of using stale offsets when reading. - We do not need to serialize the usage of any global file descriptor anymore. So this drops the mutual exclusion req hence reducing complexity and congestion. PiperOrigin-RevId: 260635174
2019-07-29ext: extent reader implementation.Ayush Ranjan
PiperOrigin-RevId: 260629559
2019-07-29ext: inode implementations.Ayush Ranjan
PiperOrigin-RevId: 260624470
2019-07-25Automated rollback of changelist 255679453Fabricio Voznika
PiperOrigin-RevId: 260047477
2019-07-24ext: filesystem boilerplate code.Ayush Ranjan
PiperOrigin-RevId: 259865366
2019-07-24ext: Add tests for root directory inode.Ayush Ranjan
PiperOrigin-RevId: 259856442
2019-07-24ext: testing environment setup with VFS2 support.Ayush Ranjan
PiperOrigin-RevId: 259835948
2019-07-23ext: Inode creation logic.Ayush Ranjan
PiperOrigin-RevId: 259666476
2019-07-23ext: Add ext2 and ext3 tiny images.Ayush Ranjan
PiperOrigin-RevId: 259657917
2019-07-23ext: Added extent tree building logic.Ayush Ranjan
PiperOrigin-RevId: 259628657
2019-07-17Take copyMu in RevalidateMichael Pratt
copyMu is required to read child.overlay.upper. PiperOrigin-RevId: 258662209
2019-07-17Separate O_DSYNC and O_SYNC.Jamie Liu
PiperOrigin-RevId: 258657913
2019-07-17ext: disklayout: extents support.Ayush Ranjan
PiperOrigin-RevId: 258657776
2019-07-17ext: Filesystem init implementation.Ayush Ranjan
PiperOrigin-RevId: 258645957
2019-07-17Merge pull request #533 from kevinGC:stub-dev-ttygVisor bot
PiperOrigin-RevId: 258607547
2019-07-17Properly invalidate cache in rename and removeMichael Pratt
We were invalidating the wrong overlayEntry in rename and missing invalidation in rename and remove if lower exists. PiperOrigin-RevId: 258604685
2019-07-16Merge pull request #474 from zhuangel:proctasksgVisor bot
PiperOrigin-RevId: 258479216
2019-07-15Support /proc/net/devJianfeng Tan
This proc file reports the stats of interfaces. We could use ifconfig command to check the result. Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com> Change-Id: Ia7c1e637f5c76c30791ffda68ee61e861b6ef827 COPYBARA_INTEGRATE_REVIEW=https://gvisor-review.googlesource.com/c/gvisor/+/18282/ PiperOrigin-RevId: 258303936
2019-07-12Merge pull request #282 from zhangningdlut:chris_test_procgVisor bot
PiperOrigin-RevId: 257855479
2019-07-11Fix license year and remove Read.Kevin
2019-07-11Add a stub for /dev/tty.Kevin
Actual implementation to follow, but this will satisfy applications that want it to just exist.
2019-07-11Added tiny ext4 image.Ayush Ranjan
The image is of size 64Kb which supports 64 1k blocks and 16 inodes. This is the smallest size mkfs.ext4 works with. Added README.md documenting how this was created and included all files on the device under assets. PiperOrigin-RevId: 257712672
2019-07-11ext: boilerplate code.Ayush Ranjan
Renamed ext4 to ext since we are targeting ext(2/3/4). Removed fs.go since we are targeting VFS2. Added ext.go with filesystem struct. PiperOrigin-RevId: 257689775
2019-07-09ext4: disklayout: Directory Entry implementation.Ayush Ranjan
PiperOrigin-RevId: 257314911
2019-07-08Don't try to execute a file that is not regular.Nicolas Lacasse
PiperOrigin-RevId: 257037608
2019-07-08ext4: disklayout: inode impl.Ayush Ranjan
PiperOrigin-RevId: 257010414
2019-07-02Remove map from fd_map, change to fd_table.Adin Scannell
This renames FDMap to FDTable and drops the kernel.FD type, which had an entire package to itself and didn't serve much use (it was freely cast between types, and served as more of an annoyance than providing any protection.) Based on BenchmarkFDLookupAndDecRef-12, we can expect 5-10 ns per lookup operation, and 10-15 ns per concurrent lookup operation of savings. This also fixes two tangential usage issues with the FDMap. Namely, non-atomic use of NewFDFrom and associated calls to Remove (that are both racy and fail to drop the reference on the underlying file.) PiperOrigin-RevId: 256285890
2019-07-02Ext4: DiskLayout: Inode interface.Ayush Ranjan
PiperOrigin-RevId: 256234390
2019-06-28Add finalizer on AtomicRefCount to check for leaks.Ian Gudger
PiperOrigin-RevId: 255711454
2019-06-28Drop ashmem and binder.Adin Scannell
These are unfortunately unused and unmaintained. They can be brought back in the future if need requires it. PiperOrigin-RevId: 255697132
2019-06-28ext4: disklayout: SuperBlock interface implementations.Ayush Ranjan
PiperOrigin-RevId: 255687771
2019-06-28Automated rollback of changelist 255263686Nicolas Lacasse
PiperOrigin-RevId: 255679453
2019-06-28Superblock interface in the disk layout package for ext4.Ayush Ranjan
PiperOrigin-RevId: 255644277
2019-06-28Fix deadloop in proc subtask listYong He
Readdir of /proc/x/task/ will get direntry entries from tasks of specified taskgroup. Now the tasks slice is unsorted, use sort.SearchInts search entry from the slice may cause infinity loops. The fix is sort the slice before search. This issue could be easily reproduced via following steps, revise Readdir in pkg/sentry/fs/proc/task.go, force set taskInts into test slice []int{1, 11, 7, 5, 10, 6, 8, 3, 9, 2, 4}, then run docker image and run ls /proc/1/task, the command will cause infinity loops.
2019-06-27Complete pipe support on overlayfsFabricio Voznika
Get/Set pipe size and ioctl support were missing from overlayfs. It required moving the pipe.Sizer interface to fs so that overlay could get access. Fixes #318 PiperOrigin-RevId: 255511125
2019-06-27Fix various spelling issues in the documentationMichael Pratt
Addresses obvious typos, in the documentation only. COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/443 from Pixep:fix/documentation-spelling 4d0688164eafaf0b3010e5f4824b35d1e7176d65 PiperOrigin-RevId: 255477779
2019-06-27Cache directory entries in the overlayMichael Pratt
Currently, the overlay dirCache is only used for a single logical use of getdents. i.e., it is discard when the FD is closed or seeked back to the beginning. But the initial work of getting the directory contents can be quite expensive (particularly sorting large directories), so we should keep it as long as possible. This is very similar to the readdirCache in fs/gofer. Since the upper filesystem does not have to allow caching readdir entries, the new CacheReaddir MountSourceOperations method controls this behavior. This caching should be trivially movable to all Inodes if desired, though that adds an additional copy step for non-overlay Inodes. (Overlay Inodes already do the extra copy). PiperOrigin-RevId: 255477592
2019-06-26Preserve permissions when checking lowerFabricio Voznika
The code was wrongly assuming that only read access was required from the lower overlay when checking for permissions. This allowed non-writable files to be writable in the overlay. Fixes #316 PiperOrigin-RevId: 255263686
2019-06-25Add TODO reminder to remove tmpfs caching optionsMichael Pratt
Updates #179 PiperOrigin-RevId: 255081565
2019-06-24fs: synchronize concurrent writes into files with O_APPENDAndrei Vagin
For files with O_APPEND, a file write operation gets a file size and uses it as offset to call an inode write operation. This means that all other operations which can change a file size should be blocked while the write operation doesn't complete. PiperOrigin-RevId: 254873771
2019-06-24Implement /proc/net/tcp.Rahat Mahmood
PiperOrigin-RevId: 254854346
2019-06-24Return ENOENT when reading /proc/{pid}/task of an exited processchris.zn
There will be a deadloop when we use getdents to read /proc/{pid}/task of an exited process Like this: Process A is running Process B: open /proc/{pid of A}/task Process A exits Process B: getdents /proc/{pid of A}/task Then, process B will fall into deadloop, and return "." and ".." in loops and never ends. This patch returns ENOENT when use getdents to read /proc/{pid}/task if the process is just exited. Signed-off-by: chris.zn <chris.zn@antfin.com>
2019-06-22Implement statx.Nicolas Lacasse
We don't have the plumbing for btime yet, so that field is left off. The returned mask indicates that btime is absent. Fixes #343 PiperOrigin-RevId: 254575752
2019-06-21gvisor/fs: getdents returns 0 if offset is equal to FileMaxOffsetAndrei Vagin
FileMaxOffset is a special case when lseek(d, 0, SEEK_END) has been called. PiperOrigin-RevId: 254498777
2019-06-21ext4 block group descriptor implementation in disk layout package.Ayush Ranjan
PiperOrigin-RevId: 254482180
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 02:31:28 +0000