summaryrefslogtreecommitdiffhomepage
path: root/pkg/sentry/fs
AgeCommit message (Collapse)Author
2020-02-10Add context to comments.Adin Scannell
PiperOrigin-RevId: 294295852
2020-02-07Support listxattr and removexattr syscalls.Dean Deng
Note that these are only implemented for tmpfs, and other impls will still return EOPNOTSUPP. PiperOrigin-RevId: 293899385
2020-02-05Add notes to relevant tests.Adin Scannell
These were out-of-band notes that can help provide additional context and simplify automated imports. PiperOrigin-RevId: 293525915
2020-02-04VFS2 gofer clientJamie Liu
Updates #1198 Opening host pipes (by spinning in fdpipe) and host sockets is not yet complete, and will be done in a future CL. Major differences from VFS1 gofer client (sentry/fs/gofer), with varying levels of backportability: - "Cache policies" are replaced by InteropMode, which control the behavior of timestamps in addition to caching. Under InteropModeExclusive (analogous to cacheAll) and InteropModeWritethrough (analogous to cacheAllWritethrough), client timestamps are *not* written back to the server (it is not possible in 9P or Linux for clients to set ctime, so writing back client-authoritative timestamps results in incoherence between atime/mtime and ctime). Under InteropModeShared (analogous to cacheRemoteRevalidating), client timestamps are not used at all (remote filesystem clocks are authoritative). cacheNone is translated to InteropModeShared + new option filesystemOptions.specialRegularFiles. - Under InteropModeShared, "unstable attribute" reloading for permission checks, lookup, and revalidation are fused, which is feasible in VFS2 since gofer.filesystem controls path resolution. This results in a ~33% reduction in RPCs for filesystem operations compared to cacheRemoteRevalidating. For example, consider stat("/foo/bar/baz") where "/foo/bar/baz" fails revalidation, resulting in the instantiation of a new dentry: VFS1 RPCs: getattr("/") // fs.MountNamespace.FindLink() => fs.Inode.CheckPermission() => gofer.inodeOperations.check() => gofer.inodeOperations.UnstableAttr() walkgetattr("/", "foo") = fid1 // fs.Dirent.walk() => gofer.session.Revalidate() => gofer.cachePolicy.Revalidate() clunk(fid1) getattr("/foo") // CheckPermission walkgetattr("/foo", "bar") = fid2 // Revalidate clunk(fid2) getattr("/foo/bar") // CheckPermission walkgetattr("/foo/bar", "baz") = fid3 // Revalidate clunk(fid3) walkgetattr("/foo/bar", "baz") = fid4 // fs.Dirent.walk() => gofer.inodeOperations.Lookup getattr("/foo/bar/baz") // linux.stat() => gofer.inodeOperations.UnstableAttr() VFS2 RPCs: getattr("/") // gofer.filesystem.walkExistingLocked() walkgetattr("/", "foo") = fid1 // gofer.filesystem.stepExistingLocked() clunk(fid1) // No getattr: walkgetattr already updated metadata for permission check walkgetattr("/foo", "bar") = fid2 clunk(fid2) walkgetattr("/foo/bar", "baz") = fid3 // No clunk: fid3 used for new gofer.dentry // No getattr: walkgetattr already updated metadata for stat() - gofer.filesystem.unlinkAt() does not require instantiation of a dentry that represents the file to be deleted. Updates #898. - gofer.regularFileFD.OnClose() skips Tflushf for regular files under InteropModeExclusive, as it's nonsensical to request a remote file flush without flushing locally-buffered writes to that remote file first. - Symlink targets are cached when InteropModeShared is not in effect. - p9.QID.Path (which is already required to be unique for each file within a server, and is accordingly already synthesized from device/inode numbers in all known gofers) is used as-is for inode numbers, rather than being mapped along with attr.RDev in the client to yet another synthetic inode number. - Relevant parts of fsutil.CachingInodeOperations are inlined directly into gofer package code. This avoids having to duplicate part of its functionality in fsutil.HostMappable. PiperOrigin-RevId: 293190213
2020-02-04Add support for sentry internal pipe for gofer mountsFabricio Voznika
Internal pipes are supported similarly to how internal UDS is done. It is also controlled by the same flag. Fixes #1102 PiperOrigin-RevId: 293150045
2020-01-31Internal change.gVisor bot
PiperOrigin-RevId: 292587459
2020-01-30Enforce splice offset limitsMichael Pratt
Splice must not allow negative offsets. Writes also must not allow offset + size to overflow int64. Reads are similarly broken, but not just in splice (b/148095030). Reported-by: syzbot+0e1ff0b95fb2859b4190@syzkaller.appspotmail.com PiperOrigin-RevId: 292361208
2020-01-28fs/splice: don't report partial errors for special filesAndrei Vagin
Special files can have additional requirements for granularity. For example, read from eventfd returns EINVAL if a size is less 8 bytes. Reported-by: syzbot+3905f5493bec08eb7b02@syzkaller.appspotmail.com PiperOrigin-RevId: 292002926
2020-01-27Update package locations.Adin Scannell
Because the abi will depend on the core types for marshalling (usermem, context, safemem, safecopy), these need to be flattened from the sentry directory. These packages contain no sentry-specific details. PiperOrigin-RevId: 291811289
2020-01-27Standardize on tools directory.Adin Scannell
PiperOrigin-RevId: 291745021
2020-01-21Rename DowngradableRWMutex to RWmutex.Ian Gudger
Also renames TMutex to Mutex. These custom mutexes aren't any worse than the standard library versions (same code), so having both seems redundant. PiperOrigin-RevId: 290873587
2020-01-21Add line break to /proc/net filesFabricio Voznika
Some files were missing the last line break. PiperOrigin-RevId: 290808898
2020-01-18Include the cgroup name in the superblock options in /proc/self/mountinfo.Nicolas Lacasse
Java 11 parses /proc/self/mountinfo for cgroup information. Java 11.0.4 uses the mount path to determine what cgroups existed, but Java 11.0.5 reads the cgroup names from the superblock options. This CL adds the cgroup name to the superblock options if the filesystem type is "cgroup". Since gVisor doesn't actually support cgroups yet, we just infer the cgroup name from the path. PiperOrigin-RevId: 290434323
2020-01-17Fix data race in MountNamespace.resolve.Nicolas Lacasse
We must hold fs.renameMu to access Dirent.parent. PiperOrigin-RevId: 290340804
2020-01-17Fix data race in tty.queue.readableSize.Nicolas Lacasse
We were setting queue.readable without holding the lock. PiperOrigin-RevId: 290306922
2020-01-17Add explanation for implementation of BSD full file locks.Dean Deng
PiperOrigin-RevId: 290272560
2020-01-16Remove unused rpcinet.Adin Scannell
PiperOrigin-RevId: 290198756
2020-01-16Implement setxattr for overlays.Dean Deng
PiperOrigin-RevId: 290186303
2020-01-16Add IfChange/ThenChange reminders in fs/procFabricio Voznika
There is a lot of code duplication for VFSv2 and this serves as remind to keep the copies in sync. Updates #1195 PiperOrigin-RevId: 290139234
2020-01-16Plumb getting/setting xattrs through InodeOperations and 9p gofer interfaces.Dean Deng
There was a very bare get/setxattr in the InodeOperations interface. Add context.Context to both, size to getxattr, and flags to setxattr. Note that extended attributes are passed around as strings in this implementation, so size is automatically encoded into the value. Size is added in getxattr so that implementations can return ERANGE if a value is larger than can fit in the user-allocated buffer. This prevents us from unnecessarily passing around an arbitrarily large xattr when the user buffer is actually too small. Don't use the existing xattrwalk and xattrcreate messages and define our own, mainly for the sake of simplicity. Extended attributes will be implemented in future commits. PiperOrigin-RevId: 290121300
2020-01-16Add remaining /proc/* and /proc/sys/* filesFabricio Voznika
Except for one under /proc/sys/net/ipv4/tcp_sack. /proc/pid/* is still incomplete. Updates #1195 PiperOrigin-RevId: 290120438
2020-01-09New sync package.Ian Gudger
* Rename syncutil to sync. * Add aliases to sync types. * Replace existing usage of standard library sync package. This will make it easier to swap out synchronization primitives. For example, this will allow us to use primitives from github.com/sasha-s/go-deadlock to check for lock ordering violations. Updates #1472 PiperOrigin-RevId: 289033387
2020-01-07fs/splice: don't report a partialResult error if there is no data lossAndrei Vagin
PiperOrigin-RevId: 288642552
2020-01-06Convert memfs into proto-tmpfs.Nicolas Lacasse
- Renamed memfs to tmpfs. - Copied fileRangeSet bits from fs/fsutil/ to fsimpl/tmpfs/ - Changed tmpfs to be backed by filemem instead of byte slice. - regularFileReadWriter uses a sync.Pool, similar to gofer client. PiperOrigin-RevId: 288356380
2019-12-19Make masterInodeOperations.Truncate take a pointer receiver.Nicolas Lacasse
Otherwise a copy happens, which triggers a data race when reading masterInodeOperations.SimpleFileOperations.uattr, which must be accessed with a lock held. PiperOrigin-RevId: 286464473
2019-12-18Add Mems_allowed to /proc/PID/statusMichael Pratt
PiperOrigin-RevId: 286248378
2019-12-17Merge pull request #1394 from zhuangel:bindlockgVisor bot
PiperOrigin-RevId: 286051631
2019-12-16Merge pull request #1392 from zhuangel:bindleakgVisor bot
PiperOrigin-RevId: 285874181
2019-12-16Implement checks for get/setxattr at the syscall layer.Dean Deng
Add checks for input arguments, file type, permissions, etc. that match the Linux implementation. A call to get/setxattr that passes all the checks will still currently return EOPNOTSUPP. Actual support will be added in following commits. Only allow user.* extended attributes for the time being. PiperOrigin-RevId: 285835159
2019-12-16Fix deadlock in overlay bindYong He
Copy up parent when binding UDS on overlayfs is supported in commit 02ab1f187cd24c67b754b004229421d189cee264. But the using of copyUp in overlayBind will cause sentry stuck, reason is dead lock in renameMu. 1 [Process A] Invoke a Unix socket bind operation renameMu is hold in fs.(*Dirent).genericCreate by process A 2 [Process B] Invoke a read syscall on /proc/task/mounts waitng on Lock of renameMu in fs.(*MountNamespace).FindMount 3 [Process A] Continue Unix socket bind operation wating on RLock of renameMu in fs.copyUp Root cause is recursive reading lock of reanmeMu in bind call trace, if there are writing lock between the two reading lock, then deadlock occured. Fixes #1397
2019-12-16Fix UDS bind cause fd leak in goferYong He
After the finalizer optimize in 76039f895995c3fe0deef5958f843868685ecc38 commit, clientFile needs to closed before finalizer release it. The clientFile is not closed if it is created via gofer.(*inodeOperations).Bind, this will cause fd leak which is hold by gofer process. Fixes #1396 Signed-off-by: Yong He <chenglang.hy@antfin.com> Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
2019-12-09Redirect TODOs to gvisor.devFabricio Voznika
PiperOrigin-RevId: 284606233
2019-12-06Implement TTY field in control.Processes().Nicolas Lacasse
Threadgroups already know their TTY (if they have one), which now contains the TTY Index, and is returned in the Processes() call. PiperOrigin-RevId: 284263850
2019-12-05Create correct file for /proc/[pid]/task/[tid]/ioZach Koopmans
PiperOrigin-RevId: 284038840
2019-12-03Fix printing /proc/[pid]/io for /proc/[pid]/task/[tid]/io.Zach Koopmans
PiperOrigin-RevId: 283630669
2019-11-26Allow open(O_TRUNC) and (f)truncate for proc files.Ian Lewis
This allows writable proc and devices files to be opened with O_CREAT|O_TRUNC. This is encountered most frequently when interacting with proc or devices files via the command line. e.g. $ echo 8192 1048576 4194304 > /proc/sys/net/ipv4/tcp_rmem Also adds a test to test the behavior of open(O_TRUNC), truncate, and ftruncate on named pipes. Fixes #1116 PiperOrigin-RevId: 282677425
2019-11-25Merge pull request #1176 from xiaobo55x:runsc_bootgVisor bot
PiperOrigin-RevId: 282382564
2019-11-21Import and structure cleanup.Adin Scannell
PiperOrigin-RevId: 281795269
2019-11-20Pass OpenTruncate to gofer in Open call when opening file with O_TRUNC.Nicolas Lacasse
Note that the Sentry still calls Truncate() on the file before calling Open. A new p9 version check was added to ensure that the p9 server can handle the the OpenTruncate flag. If not, then the flag is stripped before sending. PiperOrigin-RevId: 281609112
2019-11-18Merge pull request #1177 from xiaobo55x:fs_hostgVisor bot
PiperOrigin-RevId: 281112758
2019-11-14Check that a file is a regular file with open(O_TRUNC).Kevin Krakauer
It was possible to panic the sentry by opening a cache revalidating folder with O_TRUNC|O_CREAT. Avoids breaking php tests. PiperOrigin-RevId: 280533213
2019-11-12Use overlay MountSource when binding socket in overlay.Nicolas Lacasse
PiperOrigin-RevId: 280131840
2019-11-13Enable sentry/fs/host support on arm64.Haibo Xu
newfstatat() syscall is not supported on arm64, so we resort to use the fstatat() syscall. Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: Iea95550ea53bcf85c01f7b3b95da70ad0952177d
2019-11-13Enable runsc/boot support on arm64.Haibo Xu
This patch also include a minor change to replace syscall.Dup2 with syscall.Dup3 which was missed in a previous commit(ref a25a976). Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I00beb9cc492e44c762ebaa3750201c63c1f7c2f3
2019-11-08Automated rollback of changelist 278417533Kevin Krakauer
PiperOrigin-RevId: 279365629
2019-11-04Check that a file is a regular file with open(O_TRUNC).Kevin Krakauer
It was possible to panic the sentry by opening a cache revalidating folder with O_TRUNC|O_CREAT. PiperOrigin-RevId: 278417533
2019-10-23Merge pull request #641 from tanjianfeng:mastergVisor bot
PiperOrigin-RevId: 276380008
2019-10-16Reorder BUILD license and load functions in gvisor.Kevin Krakauer
PiperOrigin-RevId: 275139066
2019-10-16Fix problem with open FD when copy up is triggered in overlayfsFabricio Voznika
Linux kernel before 4.19 doesn't implement a feature that updates open FD after a file is open for write (and is copied to the upper layer). Already open FD will continue to read the old file content until they are reopened. This is especially problematic for gVisor because it caches open files. Flag was added to force readonly files to be reopenned when the same file is open for write. This is only needed if using kernels prior to 4.19. Closes #1006 It's difficult to really test this because we never run on tests on older kernels. I'm adding a test in GKE which uses kernels with the overlayfs problem for 1.14 and lower. PiperOrigin-RevId: 275115289
2019-10-16Support O_SYNC and O_DSYNC flags.Nicolas Lacasse
When any of these flags are set, all writes will trigger a subsequent fsync call. This behavior already existed for "write-through" mounts. O_DIRECT is treated as an alias for O_SYNC. Better support coming soon. PiperOrigin-RevId: 275114392
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-28 01:13:25 +0000