Age | Commit message (Collapse) | Author |
|
This provides the following benefits:
- We can now use pkg/fd package which does not take ownership
of the file descriptor. So it does not close the fd when garbage collected.
This reduces scope of errors from unexpected garbage collection of io.File.
- It enforces the offset parameter in every read call.
It does not affect the fd offset nor is it affected by it. Hence reducing
scope of error of using stale offsets when reading.
- We do not need to serialize the usage of any global file descriptor anymore.
So this drops the mutual exclusion req hence reducing complexity and
congestion.
PiperOrigin-RevId: 260635174
|
|
PiperOrigin-RevId: 260629559
|
|
PiperOrigin-RevId: 260624470
|
|
PiperOrigin-RevId: 260047477
|
|
PiperOrigin-RevId: 259865366
|
|
PiperOrigin-RevId: 259856442
|
|
PiperOrigin-RevId: 259835948
|
|
PiperOrigin-RevId: 259666476
|
|
PiperOrigin-RevId: 259657917
|
|
PiperOrigin-RevId: 259628657
|
|
copyMu is required to read child.overlay.upper.
PiperOrigin-RevId: 258662209
|
|
PiperOrigin-RevId: 258657913
|
|
PiperOrigin-RevId: 258657776
|
|
PiperOrigin-RevId: 258645957
|
|
PiperOrigin-RevId: 258607547
|
|
We were invalidating the wrong overlayEntry in rename and missing invalidation
in rename and remove if lower exists.
PiperOrigin-RevId: 258604685
|
|
PiperOrigin-RevId: 258479216
|
|
This proc file reports the stats of interfaces. We could use ifconfig
command to check the result.
Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com>
Change-Id: Ia7c1e637f5c76c30791ffda68ee61e861b6ef827
COPYBARA_INTEGRATE_REVIEW=https://gvisor-review.googlesource.com/c/gvisor/+/18282/
PiperOrigin-RevId: 258303936
|
|
PiperOrigin-RevId: 257855479
|
|
|
|
Actual implementation to follow, but this will satisfy applications that
want it to just exist.
|
|
The image is of size 64Kb which supports 64 1k blocks
and 16 inodes. This is the smallest size mkfs.ext4 works with.
Added README.md documenting how this was created and included
all files on the device under assets.
PiperOrigin-RevId: 257712672
|
|
Renamed ext4 to ext since we are targeting ext(2/3/4).
Removed fs.go since we are targeting VFS2.
Added ext.go with filesystem struct.
PiperOrigin-RevId: 257689775
|
|
PiperOrigin-RevId: 257314911
|
|
PiperOrigin-RevId: 257037608
|
|
PiperOrigin-RevId: 257010414
|
|
This renames FDMap to FDTable and drops the kernel.FD type, which had an entire
package to itself and didn't serve much use (it was freely cast between types,
and served as more of an annoyance than providing any protection.)
Based on BenchmarkFDLookupAndDecRef-12, we can expect 5-10 ns per lookup
operation, and 10-15 ns per concurrent lookup operation of savings.
This also fixes two tangential usage issues with the FDMap. Namely, non-atomic
use of NewFDFrom and associated calls to Remove (that are both racy and fail to
drop the reference on the underlying file.)
PiperOrigin-RevId: 256285890
|
|
PiperOrigin-RevId: 256234390
|
|
PiperOrigin-RevId: 255711454
|
|
These are unfortunately unused and unmaintained. They can be brought back in
the future if need requires it.
PiperOrigin-RevId: 255697132
|
|
PiperOrigin-RevId: 255687771
|
|
PiperOrigin-RevId: 255679453
|
|
PiperOrigin-RevId: 255644277
|
|
Readdir of /proc/x/task/ will get direntry entries
from tasks of specified taskgroup. Now the tasks
slice is unsorted, use sort.SearchInts search entry
from the slice may cause infinity loops.
The fix is sort the slice before search.
This issue could be easily reproduced via following
steps, revise Readdir in pkg/sentry/fs/proc/task.go,
force set taskInts into test slice
[]int{1, 11, 7, 5, 10, 6, 8, 3, 9, 2, 4},
then run docker image and run ls /proc/1/task, the
command will cause infinity loops.
|
|
Get/Set pipe size and ioctl support were missing from
overlayfs. It required moving the pipe.Sizer interface
to fs so that overlay could get access.
Fixes #318
PiperOrigin-RevId: 255511125
|
|
Addresses obvious typos, in the documentation only.
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/443 from Pixep:fix/documentation-spelling 4d0688164eafaf0b3010e5f4824b35d1e7176d65
PiperOrigin-RevId: 255477779
|
|
Currently, the overlay dirCache is only used for a single logical use of
getdents. i.e., it is discard when the FD is closed or seeked back to
the beginning.
But the initial work of getting the directory contents can be quite
expensive (particularly sorting large directories), so we should keep it
as long as possible.
This is very similar to the readdirCache in fs/gofer.
Since the upper filesystem does not have to allow caching readdir
entries, the new CacheReaddir MountSourceOperations method controls this
behavior.
This caching should be trivially movable to all Inodes if desired,
though that adds an additional copy step for non-overlay Inodes.
(Overlay Inodes already do the extra copy).
PiperOrigin-RevId: 255477592
|
|
The code was wrongly assuming that only read access was
required from the lower overlay when checking for permissions.
This allowed non-writable files to be writable in the overlay.
Fixes #316
PiperOrigin-RevId: 255263686
|
|
Updates #179
PiperOrigin-RevId: 255081565
|
|
For files with O_APPEND, a file write operation gets a file size and uses it as
offset to call an inode write operation. This means that all other operations
which can change a file size should be blocked while the write operation doesn't
complete.
PiperOrigin-RevId: 254873771
|
|
PiperOrigin-RevId: 254854346
|
|
There will be a deadloop when we use getdents to read /proc/{pid}/task
of an exited process
Like this:
Process A is running
Process B: open /proc/{pid of A}/task
Process A exits
Process B: getdents /proc/{pid of A}/task
Then, process B will fall into deadloop, and return "." and ".."
in loops and never ends.
This patch returns ENOENT when use getdents to read /proc/{pid}/task
if the process is just exited.
Signed-off-by: chris.zn <chris.zn@antfin.com>
|
|
We don't have the plumbing for btime yet, so that field is left off. The
returned mask indicates that btime is absent.
Fixes #343
PiperOrigin-RevId: 254575752
|
|
FileMaxOffset is a special case when lseek(d, 0, SEEK_END) has been called.
PiperOrigin-RevId: 254498777
|
|
PiperOrigin-RevId: 254482180
|
|
These are the only packages missing docs:
https://godoc.org/gvisor.dev/gvisor
PiperOrigin-RevId: 254261022
|
|
This allows tasks to have distinct mount namespace, instead of all sharing the
kernel's root mount namespace.
Currently, the only way for a task to get a different mount namespace than the
kernel's root is by explicitly setting a different MountNamespace in
CreateProcessArgs, and nothing does this (yet).
In a follow-up CL, we will set CreateProcessArgs.MountNamespace when creating a
new container inside runsc.
Note that "MountNamespace" is a poor term for this thing. It's more like a
distinct VFS tree. When we get around to adding real mount namespaces, this
will need a better naem.
PiperOrigin-RevId: 254009310
|
|
Test fails because it's reading 4KB instead of the
expected 64KB. Changed the test to read pipe buffer
size instead of hardcode and added some logging in
case the reason for failure was not pipe buffer size.
PiperOrigin-RevId: 253916040
|
|
sockets, pipes and other non-seekable file descriptors don't
use file.offset, so we don't need to update it.
With this change, we will be able to call file operations
without locking the file.mu mutex. This is already used for
pipes in the splice system call.
PiperOrigin-RevId: 253746644
|
|
All functions which allocate objects containing AtomicRefCounts will soon need
a context.
PiperOrigin-RevId: 253147709
|