| Age | Commit message (Collapse) | Author |
|---|
|
PiperOrigin-RevId: 375780659
|
|
This metric is replaced by /cloud/gvisor/sandbox/sentry/suspicious_operations
metric with field value opened_write_execute_file.
PiperOrigin-RevId: 374509823
|
|
The new metric contains fields and will replace the below existing metric:
- opened_write_execute_file
PiperOrigin-RevId: 373884604
|
|
https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt:
/proc/sys/net/ipv4/* Variables:
ip_forward - BOOLEAN
0 - disabled (default)
not 0 - enabled
Forward Packets between interfaces.
This variable is special, its change resets all configuration
parameters to their default state (RFC1122 for hosts, RFC1812
for routers)
/proc/sys/net/ipv4/ip_forward only does work when its value is changed
and always returns the last written value. The last written value may
not reflect the current state of the netstack (e.g. when `ip_forward`
was written a value of "1" then disable forwarding on an interface)
so there is no need for sentry to probe netstack to get the current
forwarding state of interfaces.
```
~$ cat /proc/sys/net/ipv4/ip_forward
0
~$ sudo bash -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
~$ cat /proc/sys/net/ipv4/ip_forward
1
~$ sudo sysctl -a | grep ipv4 | grep forward
net.ipv4.conf.all.forwarding = 1
net.ipv4.conf.default.forwarding = 1
net.ipv4.conf.eno1.forwarding = 1
net.ipv4.conf.lo.forwarding = 1
net.ipv4.conf.wlp1s0.forwarding = 1
net.ipv4.ip_forward = 1
net.ipv4.ip_forward_update_priority = 1
net.ipv4.ip_forward_use_pmtu = 0
~$ sudo sysctl -w net.ipv4.conf.wlp1s0.forwarding=0
net.ipv4.conf.wlp1s0.forwarding = 0
~$ sudo sysctl -a | grep ipv4 | grep forward
net.ipv4.conf.all.forwarding = 1
net.ipv4.conf.default.forwarding = 1
net.ipv4.conf.eno1.forwarding = 1
net.ipv4.conf.lo.forwarding = 1
net.ipv4.conf.wlp1s0.forwarding = 0
net.ipv4.ip_forward = 1
net.ipv4.ip_forward_update_priority = 1
net.ipv4.ip_forward_use_pmtu = 0
~$ cat /proc/sys/net/ipv4/ip_forward
1
~$ sudo bash -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
~$ sudo sysctl -a | grep ipv4 | grep forward
net.ipv4.conf.all.forwarding = 1
net.ipv4.conf.default.forwarding = 1
net.ipv4.conf.eno1.forwarding = 1
net.ipv4.conf.lo.forwarding = 1
net.ipv4.conf.wlp1s0.forwarding = 0
net.ipv4.ip_forward = 1
net.ipv4.ip_forward_update_priority = 1
net.ipv4.ip_forward_use_pmtu = 0
~$ sudo bash -c "echo 0 > /proc/sys/net/ipv4/ip_forward"
~$ sudo sysctl -a | grep ipv4 | grep forward
sysctl: unable to open directory "/proc/sys/fs/binfmt_misc/"
net.ipv4.conf.all.forwarding = 0
net.ipv4.conf.default.forwarding = 0
net.ipv4.conf.eno1.forwarding = 0
net.ipv4.conf.lo.forwarding = 0
net.ipv4.conf.wlp1s0.forwarding = 0
net.ipv4.ip_forward = 0
net.ipv4.ip_forward_update_priority = 1
net.ipv4.ip_forward_use_pmtu = 0
~$ cat /proc/sys/net/ipv4/ip_forward
0
```
In the above example we can see that writing "1" to
/proc/sys/net/ipv4/ip_forward configures the stack to be a router (all
interfaces are configured to enable forwarding). However, if we manually
update an interace (`wlp1s0`) to not forward packets,
/proc/sys/net/ipv4/ip_forward continues to return the last written value
of "1", even though not all interfaces will forward packets.
Also note that writing the same value twice has no effect; work is
performed iff the value changes.
This change also removes the 'unset' state from sentry's ip forwarding
data structures as an 'unset' ip forwarding value is the same as leaving
forwarding disabled as the stack is always brought up with forwarding
initially disabled; disabling forwarding on a newly created stack is a
no-op.
PiperOrigin-RevId: 373853106
|
|
Fixes #2926, #674
PiperOrigin-RevId: 369457123
|
|
Split usermem package to help remove syserror dependency in go_marshal.
New hostarch package contains code not dependent on syserror.
PiperOrigin-RevId: 365651233
|
|
Before this change:
```
$ docker run --runtime=runsc --rm -it -v ~/tmp:/hosttmp ubuntu:focal /hosttmp/issue5732 --bytes1=128 --bytes2=1024
#1: read(128) = 128
#2: read(1024) = EOF
$ docker run --runtime=runsc-vfs2 --rm -it -v ~/tmp:/hosttmp ubuntu:focal /hosttmp/issue5732 --bytes1=128 --bytes2=1024
#1: read(128) = 128
#2: read(1024) = 256
```
After this change:
```
$ docker run --runtime=runsc --rm -it -v ~/tmp:/hosttmp ubuntu:focal /hosttmp/issue5732 --bytes1=128 --bytes2=1024
#1: read(128) = 128
#2: read(1024) = 256
$ docker run --runtime=runsc-vfs2 --rm -it -v ~/tmp:/hosttmp ubuntu:focal /hosttmp/issue5732 --bytes1=128 --bytes2=1024
#1: read(128) = 128
#2: read(1024) = 256
```
Fixes #5732
PiperOrigin-RevId: 365178386
|
|
On Linux these are meant to be equivalent to POLLIN/POLLOUT. Rather
than hack these on in sys_poll etc it felt cleaner to just cleanup
the call sites to notify for both events. This is what linux does
as well.
Fixes #5544
PiperOrigin-RevId: 364859977
|
|
PiperOrigin-RevId: 364370595
|
|
Doing so involved breaking dependencies between //pkg/tcpip and the rest
of gVisor, which are discouraged anyways.
Tested on the Go branch via:
gvisor.dev/gvisor/pkg/tcpip/...
Addresses #1446.
PiperOrigin-RevId: 363081778
|
|
Speeds up the socket stress tests by a couple orders of magnitude.
PiperOrigin-RevId: 361721050
|
|
This validates that struct fields if annotated with "// checklocks:mu" where
"mu" is a mutex field in the same struct then access to the field is only
done with "mu" locked.
All types that are guarded by a mutex must be annotated with
// +checklocks:<mutex field name>
For more details please refer to README.md.
PiperOrigin-RevId: 360729328
|
|
The syscall package has been deprecated in favor of golang.org/x/sys.
Note that syscall is still used in the following places:
- pkg/sentry/socket/hostinet/stack.go: some netlink related functionalities
are not yet available in golang.org/x/sys.
- syscall.Stat_t is still used in some places because os.FileInfo.Sys() still
returns it and not unix.Stat_t.
Updates #214
PiperOrigin-RevId: 360701387
|
|
Note that this CL reorders overlayEntry.copyMu before overlayEntry.dirCacheMu
in the overlayFileOperations.IterateDir() => readdirEntries() path - but this
lock ordering is already required by overlayRemove/Bind() =>
overlayEntry.markDirectoryDirty(), so this actually just fixes an
inconsistency.
PiperOrigin-RevId: 358047121
|
|
PiperOrigin-RevId: 357015186
|
|
The limits for snd/rcv buffers for unix domain socket is controlled by the
following sysctls on linux
- net.core.rmem_default
- net.core.rmem_max
- net.core.wmem_default
- net.core.wmem_max
Today in gVisor we do not expose these sysctls but we do support setting the
equivalent in netstack via stack.Options() method. But AF_UNIX sockets in gVisor
can be used without netstack, with hostinet or even without any networking stack
at all. Which means ideally these sysctls need to live as globals in gVisor.
But rather than make this a big change for now we hardcode the limits in the
AF_UNIX implementation itself (which in itself is better than where we were
before) where it SO_SNDBUF was hardcoded to 16KiB. Further we bump the initial
limit to a default value of 208 KiB to match linux from the paltry 16 KiB we use
today.
Updates #5132
PiperOrigin-RevId: 356665498
|
|
PiperOrigin-RevId: 356536548
|
|
This makes it possible to add data to types that implement tcpip.Error.
ErrBadLinkEndpoint is removed as it is unused.
PiperOrigin-RevId: 354437314
|
|
This improves type-assertion safety.
PiperOrigin-RevId: 353931228
|
|
Fixes #5113.
PiperOrigin-RevId: 353313374
|
|
These are primarily simplification and lint mistakes. However, minor
fixes are also included and tests added where appropriate.
PiperOrigin-RevId: 351425971
|
|
open() has to return ENXIO in this case.
O_PATH isn't supported by vfs1.
PiperOrigin-RevId: 348820478
|
|
PiperOrigin-RevId: 347047550
|
|
This is the RWMutex equivalent to the preceding sync.Mutex CL.
Updates #4804
PiperOrigin-RevId: 345681051
|
|
PiperOrigin-RevId: 345178956
|
|
We would like to track locks ordering to detect ordering violations. Detecting
violations is much simpler if mutexes must be unlocked by the same goroutine
that locked them.
Thus, as a first step to tracking lock ordering, add this lock/unlock
requirement to gVisor's sync.Mutex. This is more strict than the Go standard
library's sync.Mutex, but initial testing indicates only a single lock that is
used across goroutines. The new sync.CrossGoroutineMutex relaxes the
requirement (but will not provide lock order checking).
Due to the additional overhead, enforcement is only enabled with the
"checklocks" build tag. Build with this tag using:
bazel build --define=gotags=checklocks ...
From my spot-checking, this has no changed inlining properties when disabled.
Updates #4804
PiperOrigin-RevId: 343370200
|
|
PiperOrigin-RevId: 343196927
|
|
- Make AddressableEndpoint optional for NetworkEndpoint.
Not all NetworkEndpoints need to support addressing (e.g. ARP), so
AddressableEndpoint should only be implemented for protocols that
support addressing such as IPv4 and IPv6.
With this change, tcpip.ErrNotSupported will be returned by the stack
when attempting to modify addresses on a network endpoint that does
not support addressing.
Now that packets are fully handled at the network layer, and (with this
change) addresses are optional for network endpoints, we no longer need
the workaround for ARP where a fake ARP address was added to each NIC
that performs ARP so that packets would be delivered to the ARP layer.
PiperOrigin-RevId: 342722547
|
|
kernel.Task can only be used as context.Context by that Task's task goroutine.
This is violated in at least two places:
- In any case where one thread accesses the /proc/[tid] of any other thread,
passing the kernel.Task for [tid] as the context.Context is incorrect.
- Task.rebuildTraceContext() may be called by Kernel.RebuildTraceContexts()
outside the scope of any task goroutine.
Fix these (as well as a data race on Task.traceContext discovered during the
course of finding the latter).
PiperOrigin-RevId: 342174404
|
|
PiperOrigin-RevId: 340536306
|
|
The default pipe size already matched linux, and is unchanged.
Furthermore `atomicIOBytes` is made a proper constant (as it is in Linux). We
were plumbing usermem.PageSize everywhere, so this is no functional change.
PiperOrigin-RevId: 340497006
|
|
This PR implements /proc/[pid]/mem for `pkg/sentry/fs` (refer to #2716) and `pkg/sentry/fsimpl`.
@majek
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/4060 from lnsp:proc-pid-mem 2caf9021254646f441be618a9bb5528610e44d43
PiperOrigin-RevId: 339369629
|
|
Inode number consistency checks are now skipped in save/restore tests for
reasons described in greatest detail in StatTest.StateDoesntChangeAfterRename.
They pass in VFS1 due to the bug described in new test case
SimpleStatTest.DifferentFilesHaveDifferentDeviceInodeNumberPairs.
Fixes #1663
PiperOrigin-RevId: 338776148
|
|
The sentry page cache stores file contents at page granularity; this is
necessary for memory mappings. Thus file offset ranges passed to
fsutil.FileRangeSet.Fill() must be page-aligned. If the read callback passed to
Fill() returns (partial read, nil error) when reading up to EOF (which is the
case for p9.ClientFile.ReadAt() since 9P's Rread cannot convey both a partial
read and EOF), Fill() will re-invoke the read callback to try to read from EOF
to the end of the containing page, which is harmless but needlessly expensive.
Fix this by handling file size explicitly in fsutil.FileRangeSet.Fill().
PiperOrigin-RevId: 336934075
|
|
This fixes reference leaks related to accidentally forgetting to DecRef()
after calling one or the other.
PiperOrigin-RevId: 336918922
|
|
PiperOrigin-RevId: 336339194
|
|
PiperOrigin-RevId: 336304024
|
|
When a response needs to be sent to an incoming packet, the stack should
consult its neighbour table to determine the remote address's link
address.
When an entry does not exist in the stack's neighbor table, the stack
should queue the packet while link resolution completes. See comments.
PiperOrigin-RevId: 336185457
|
|
This change also adds support to go_stateify for detecting an appropriate
receiver name, avoiding a large number of false positives.
PiperOrigin-RevId: 335994587
|
|
PiperOrigin-RevId: 334478850
|
|
PiperOrigin-RevId: 332760843
|
|
PiperOrigin-RevId: 332548335
|
|
|
|
PiperOrigin-RevId: 332122081
|
|
|
|
test/fuse/benchmark/read_benchmark.cc:34: Failure
Expected: (fuse_prefix) != (nullptr), actual: NULL vs (nullptr)
external/com_google_benchmark/src/benchmark_runner.cc:120: RunInThread:
Check `st.iterations() >= st.max_iterations' failed. Benchmark returned
before State::KeepRunning() returned false!
--- FAIL: Benchmarks_BM_Read/262144/real_time (0.29s)
runner.go:502: test "Benchmarks.BM_Read/262144/real_time" failed
with error exit status 134, want nil
FAIL
|
|
This change adds the following:
- Add support for containerizing syscall tests for FUSE
- Mount tmpfs in the container so we can run benchmarks against it
- Run the server in a background process
- benchmarks for fuse syscall
Co-authored-by: Ridwan Sharif <ridwanmsharif@google.com>
|
|
In Linux, FDSize is fs/proc/array.c:task_state() => struct fdtable::max_fds,
which is set to the underlying array's length in fs/file.c:alloc_fdtable().
Follow-up changes:
- Remove FDTable.GetRefs() and FDTable.GetRefsVFS2(), which are unused.
- Reset FDTable.used to 0 during restore, since the subsequent calls to
FDTable.setAll() increment it again, causing its value to be doubled. (After
this CL, FDTable.used is only used to avoid reallocation in FDTable.GetFDs(),
so this fix is not very visible.)
PiperOrigin-RevId: 331588190
|
|
PiperOrigin-RevId: 331256608
|
|
Fixes an error where in case of a receive buffer larger than the host send
buffer size for a host backed unix dgram socket we would end up swallowing EOF
from recvmsg syscall causing the read() to block forever.
PiperOrigin-RevId: 331192810
|
