summaryrefslogtreecommitdiffhomepage
path: root/pkg/sentry/fs
AgeCommit message (Collapse)Author
2019-10-01Disable cpuClockTicker when app is idleMichael Pratt
Kernel.cpuClockTicker increments kernel.cpuClock, which tasks use as a clock to track their CPU usage. This improves latency in the syscall path by avoid expensive monotonic clock calls on every syscall entry/exit. However, this timer fires every 10ms. Thus, when all tasks are idle (i.e., blocked or stopped), this forces a sentry wakeup every 10ms, when we may otherwise be able to sleep until the next app-relevant event. These wakeups cause the sentry to utilize approximately 2% CPU when the application is otherwise idle. Updates to clock are not strictly necessary when the app is idle, as there are no readers of cpuClock. This commit reduces idle CPU by disabling the timer when tasks are completely idle, and computing its effects at the next wakeup. Rather than disabling the timer as soon as the app goes idle, we wait until the next tick, which provides a window for short sleeps to sleep and wakeup without doing the (relatively) expensive work of disabling and enabling the timer. PiperOrigin-RevId: 272265822
2019-09-30splice: try another fallback option only if the previous one isn't supportedAndrei Vagin
Reported-by: syzbot+bb5ed342be51d39b0cbb@syzkaller.appspotmail.com PiperOrigin-RevId: 272110815
2019-09-30Force timestamps to update when set via InodeOperations.SetTimestamps.Nicolas Lacasse
The gofer's CachingInodeOperations implementation contains an optimization for the common open-read-close pattern when we have a host FD. In this case, the host kernel will update the timestamp for us to a reasonably close time, so we don't need an extra RPC to the gofer. However, when the app explicitly sets the timestamps (via futimes or similar) then we actually DO need to update the timestamps, because the host kernel won't do it for us. To fix this, a new boolean `forceSetTimestamps` was added to CachineInodeOperations.SetMaskedAttributes. It is only set by gofer.InodeOperations.SetTimestamps. PiperOrigin-RevId: 272048146
2019-09-24tty: fix sending SIGTTOU on tty writehenry.tjf
How to reproduce: $ echo "timeout 10 ls" > foo.sh $ chmod +x foo.sh $ ./foo.sh (will hang here for 10 secs, and the output of ls does not show) When "ls" process writes to stdout, it receives SIGTTOU signal, and hangs there. Until "timeout" process timeouts, and kills "ls" process. The expected result is: "ls" writes its output into tty, and terminates immdedately, then "timeout" process receives SIGCHLD and terminates. The reason for this failure is that we missed the check for TOSTOP (if set, background processes will receive the SIGTTOU signal when they do write). We use drivers/tty/n_tty.c:n_tty_write() as a reference. Fixes: #862 Reported-by: chris.zn <chris.zn@antfin.com> Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com> Signed-off-by: chenglang.hy <chenglang.hy@antfin.com>
2019-09-19Job control: controlling TTYs and foreground process groups.Kevin Krakauer
Adresses a deadlock with the rolled back change: https://github.com/google/gvisor/commit/b6a5b950d28e0b474fdad160b88bc15314cf9259 Creating a session from an orphaned process group was causing a lock to be acquired twice by a single goroutine. This behavior is addressed, and a test (OrphanRegression) has been added to pty.cc. Implemented the following ioctls: - TIOCSCTTY - set controlling TTY - TIOCNOTTY - remove controlling tty, maybe signal some other processes - TIOCGPGRP - get foreground process group. Also enables tcgetpgrp(). - TIOCSPGRP - set foreground process group. Also enabled tcsetpgrp(). Next steps are to actually turn terminal-generated control characters (e.g. C^c) into signals to the proper process groups, and to send SIGTTOU and SIGTTIN when appropriate. PiperOrigin-RevId: 270088599
2019-09-13gvisor: return ENOTDIR from the unlink syscallAndrei Vagin
ENOTDIR has to be returned when a component used as a directory in pathname is not, in fact, a directory. PiperOrigin-RevId: 269037893
2019-09-12Implement splice methods for pipes and sockets.Adin Scannell
This also allows the tee(2) implementation to be enabled, since dup can now be properly supported via WriteTo. Note that this change necessitated some minor restructoring with the fs.FileOperations splice methods. If the *fs.File is passed through directly, then only public API methods are accessible, which will deadlock immediately since the locking is already done by fs.Splice. Instead, we pass through an abstract io.Reader or io.Writer, which elide locks and use the underlying fs.FileOperations directly. PiperOrigin-RevId: 268805207
2019-09-12Remove go_test from go_stateify and go_marshalMichael Pratt
They are no-ops, so the standard rule works fine. PiperOrigin-RevId: 268776264
2019-08-30Remove support for non-incremental mapped accounting.Jamie Liu
PiperOrigin-RevId: 266496644
2019-08-30Automated rollback of changelist 261387276Bhasker Hariharan
PiperOrigin-RevId: 266491264
2019-08-29Implement /proc/net/udp.Rahat Mahmood
PiperOrigin-RevId: 266229756
2019-08-29Add limit_host_fd_translation Gofer mount option.Jamie Liu
PiperOrigin-RevId: 266177409
2019-08-27Mount volumes as super userFabricio Voznika
This used to be the case, but regressed after a recent change. Also made a few fixes around it and clean up the code a bit. Closes #720 PiperOrigin-RevId: 265717496
2019-08-14Replace uinptr with int64 when returning lengthsTamir Duberstein
This is in accordance with newer parts of the standard library. PiperOrigin-RevId: 263449916
2019-08-13Fix file mode check in pipeOperationsFabricio Voznika
PiperOrigin-RevId: 263203441
2019-08-09ext: Move to pkg/sentry/fsimpl.Ayush Ranjan
fsimpl is the keeper of all filesystem implementations in VFS2. PiperOrigin-RevId: 262617869
2019-08-08ext: Benchmark tests.Ayush Ranjan
Added benchmark tests which emulate memfs benchmarks. Stat benchmarks BenchmarkVFS2Ext4fsStat/1-12 10000000 145 ns/op BenchmarkVFS2Ext4fsStat/2-12 10000000 170 ns/op BenchmarkVFS2Ext4fsStat/3-12 10000000 202 ns/op BenchmarkVFS2Ext4fsStat/8-12 3000000 374 ns/op BenchmarkVFS2Ext4fsStat/64-12 500000 2159 ns/op BenchmarkVFS2Ext4fsStat/100-12 300000 3459 ns/op BenchmarkVFS1TmpfsStat/1-12 5000000 348 ns/op BenchmarkVFS1TmpfsStat/2-12 3000000 487 ns/op BenchmarkVFS1TmpfsStat/3-12 2000000 655 ns/op BenchmarkVFS1TmpfsStat/8-12 1000000 1365 ns/op BenchmarkVFS1TmpfsStat/64-12 200000 9565 ns/op BenchmarkVFS1TmpfsStat/100-12 100000 15158 ns/op BenchmarkVFS2MemfsStat/1-12 10000000 133 ns/op BenchmarkVFS2MemfsStat/2-12 10000000 155 ns/op BenchmarkVFS2MemfsStat/3-12 10000000 182 ns/op BenchmarkVFS2MemfsStat/8-12 5000000 310 ns/op BenchmarkVFS2MemfsStat/64-12 1000000 1659 ns/op BenchmarkVFS2MemfsStat/100-12 500000 2787 ns/op Mount Stat benchmarks BenchmarkVFS2ExtfsMountStat/1-12 5000000 245 ns/op BenchmarkVFS2ExtfsMountStat/2-12 5000000 266 ns/op BenchmarkVFS2ExtfsMountStat/3-12 5000000 304 ns/op BenchmarkVFS2ExtfsMountStat/8-12 3000000 456 ns/op BenchmarkVFS2ExtfsMountStat/64-12 500000 2308 ns/op BenchmarkVFS2ExtfsMountStat/100-12 300000 3482 ns/op BenchmarkVFS1TmpfsMountStat/1-12 3000000 488 ns/op BenchmarkVFS1TmpfsMountStat/2-12 2000000 658 ns/op BenchmarkVFS1TmpfsMountStat/3-12 2000000 806 ns/op BenchmarkVFS1TmpfsMountStat/8-12 1000000 1514 ns/op BenchmarkVFS1TmpfsMountStat/64-12 100000 10037 ns/op BenchmarkVFS1TmpfsMountStat/100-12 100000 15280 ns/op BenchmarkVFS2MemfsMountStat/1-12 10000000 212 ns/op BenchmarkVFS2MemfsMountStat/2-12 5000000 232 ns/op BenchmarkVFS2MemfsMountStat/3-12 5000000 264 ns/op BenchmarkVFS2MemfsMountStat/8-12 3000000 390 ns/op BenchmarkVFS2MemfsMountStat/64-12 1000000 1813 ns/op BenchmarkVFS2MemfsMountStat/100-12 500000 2812 ns/op PiperOrigin-RevId: 262477158
2019-08-08Return a well-defined socket address type from socket funtions.Rahat Mahmood
Previously we were representing socket addresses as an interface{}, which allowed any type which could be binary.Marshal()ed to be used as a socket address. This is fine when the address is passed to userspace via the linux ABI, but is problematic when used from within the sentry such as by networking procfs files. PiperOrigin-RevId: 262460640
2019-08-07ext: Seek unit tests.Ayush Ranjan
PiperOrigin-RevId: 262264674
2019-08-07ext: StatAt unit tests.Ayush Ranjan
PiperOrigin-RevId: 262249166
2019-08-07ext: Read unit tests.Ayush Ranjan
PiperOrigin-RevId: 262242410
2019-08-07ext: IterDirent unit tests.Ayush Ranjan
PiperOrigin-RevId: 262226761
2019-08-07ext: vfs.FileDescriptionImpl and vfs.FilesystemImpl implementations.Ayush Ranjan
- This also gets rid of pipes for now because pipe does not have vfs2 specific support yet. - Added file path resolution logic. - Fixes testing infrastructure. - Does not include unit tests yet. PiperOrigin-RevId: 262213950
2019-08-02Job control: controlling TTYs and foreground process groups.Kevin Krakauer
(Don't worry, this is mostly tests.) Implemented the following ioctls: - TIOCSCTTY - set controlling TTY - TIOCNOTTY - remove controlling tty, maybe signal some other processes - TIOCGPGRP - get foreground process group. Also enables tcgetpgrp(). - TIOCSPGRP - set foreground process group. Also enabled tcsetpgrp(). Next steps are to actually turn terminal-generated control characters (e.g. C^c) into signals to the proper process groups, and to send SIGTTOU and SIGTTIN when appropriate. PiperOrigin-RevId: 261387276
2019-08-02Remove kernel.mounts.Nicolas Lacasse
We can get the mount namespace from the CreateProcessArgs in all cases where we need it. This also gets rid of kernel.Destroy method, since the only thing it was doing was DecRefing the mounts. Removing the need to call kernel.SetRootMountNamespace also allowed for some more simplifications in the container fs setup code. PiperOrigin-RevId: 261357060
2019-08-01tmpfs and ramfs Dirs should drop references on children in Release().Nicolas Lacasse
This is the source of many warnings like: AtomicRefCount 0x7f5ff84e3500 owned by "fs.Inode" garbage collected with ref count of 1 (want 0) PiperOrigin-RevId: 261197093
2019-07-30Cache pages in CachingInodeOperations.Read when memory evictions are delayed.Jamie Liu
PiperOrigin-RevId: 260851452
2019-07-30ext: Migrate from using fileReader custom interface to using io.Reader.Ayush Ranjan
It gets rid of holding state of the io.Reader offset (which is anyways held by the vfs.FileDescriptor struct. It is also odd using a io.Reader becuase we using io.ReaderAt to interact with the device. So making a io.ReaderAt wrapper makes more sense. Most importantly, it gets rid of the complexity of extracting the file reader from a regular file implementation and then using it. Now we can just use the regular file implementation as a reader which is more intuitive. PiperOrigin-RevId: 260846927
2019-07-30ext: block map file reader implementation.Ayush Ranjan
Also adds stress tests for block map reader and intensifies extent reader tests. PiperOrigin-RevId: 260838177
2019-07-30Add feature to launch Sentry from an open host FD.Zach Koopmans
Adds feature to launch from an open host FD instead of a binary_path. The FD should point to a valid executable and most likely be statically compiled. If the executable is not statically compiled, the loader will search along the interpreter paths, which must be able to be resolved in the Sandbox's file system or start will fail. PiperOrigin-RevId: 260756825
2019-07-29Migrate from using io.ReadSeeker to io.ReaderAt.Ayush Ranjan
This provides the following benefits: - We can now use pkg/fd package which does not take ownership of the file descriptor. So it does not close the fd when garbage collected. This reduces scope of errors from unexpected garbage collection of io.File. - It enforces the offset parameter in every read call. It does not affect the fd offset nor is it affected by it. Hence reducing scope of error of using stale offsets when reading. - We do not need to serialize the usage of any global file descriptor anymore. So this drops the mutual exclusion req hence reducing complexity and congestion. PiperOrigin-RevId: 260635174
2019-07-29ext: extent reader implementation.Ayush Ranjan
PiperOrigin-RevId: 260629559
2019-07-29ext: inode implementations.Ayush Ranjan
PiperOrigin-RevId: 260624470
2019-07-25Automated rollback of changelist 255679453Fabricio Voznika
PiperOrigin-RevId: 260047477
2019-07-24ext: filesystem boilerplate code.Ayush Ranjan
PiperOrigin-RevId: 259865366
2019-07-24ext: Add tests for root directory inode.Ayush Ranjan
PiperOrigin-RevId: 259856442
2019-07-24ext: testing environment setup with VFS2 support.Ayush Ranjan
PiperOrigin-RevId: 259835948
2019-07-23ext: Inode creation logic.Ayush Ranjan
PiperOrigin-RevId: 259666476
2019-07-23ext: Add ext2 and ext3 tiny images.Ayush Ranjan
PiperOrigin-RevId: 259657917
2019-07-23ext: Added extent tree building logic.Ayush Ranjan
PiperOrigin-RevId: 259628657
2019-07-17Take copyMu in RevalidateMichael Pratt
copyMu is required to read child.overlay.upper. PiperOrigin-RevId: 258662209
2019-07-17Separate O_DSYNC and O_SYNC.Jamie Liu
PiperOrigin-RevId: 258657913
2019-07-17ext: disklayout: extents support.Ayush Ranjan
PiperOrigin-RevId: 258657776
2019-07-17ext: Filesystem init implementation.Ayush Ranjan
PiperOrigin-RevId: 258645957
2019-07-17Merge pull request #533 from kevinGC:stub-dev-ttygVisor bot
PiperOrigin-RevId: 258607547
2019-07-17Properly invalidate cache in rename and removeMichael Pratt
We were invalidating the wrong overlayEntry in rename and missing invalidation in rename and remove if lower exists. PiperOrigin-RevId: 258604685
2019-07-16Merge pull request #474 from zhuangel:proctasksgVisor bot
PiperOrigin-RevId: 258479216
2019-07-15Support /proc/net/devJianfeng Tan
This proc file reports the stats of interfaces. We could use ifconfig command to check the result. Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com> Change-Id: Ia7c1e637f5c76c30791ffda68ee61e861b6ef827 COPYBARA_INTEGRATE_REVIEW=https://gvisor-review.googlesource.com/c/gvisor/+/18282/ PiperOrigin-RevId: 258303936
2019-07-12Merge pull request #282 from zhangningdlut:chris_test_procgVisor bot
PiperOrigin-RevId: 257855479
2019-07-11Fix license year and remove Read.Kevin
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-22 05:41:09 +0000