Age | Commit message (Collapse) | Author |
|
This makes it possible to add data to types that implement tcpip.Error.
ErrBadLinkEndpoint is removed as it is unused.
PiperOrigin-RevId: 354437314
|
|
This improves type-assertion safety.
PiperOrigin-RevId: 353931228
|
|
Fixes #5113.
PiperOrigin-RevId: 353313374
|
|
These are primarily simplification and lint mistakes. However, minor
fixes are also included and tests added where appropriate.
PiperOrigin-RevId: 351425971
|
|
open() has to return ENXIO in this case.
O_PATH isn't supported by vfs1.
PiperOrigin-RevId: 348820478
|
|
PiperOrigin-RevId: 347047550
|
|
This is the RWMutex equivalent to the preceding sync.Mutex CL.
Updates #4804
PiperOrigin-RevId: 345681051
|
|
PiperOrigin-RevId: 345178956
|
|
We would like to track locks ordering to detect ordering violations. Detecting
violations is much simpler if mutexes must be unlocked by the same goroutine
that locked them.
Thus, as a first step to tracking lock ordering, add this lock/unlock
requirement to gVisor's sync.Mutex. This is more strict than the Go standard
library's sync.Mutex, but initial testing indicates only a single lock that is
used across goroutines. The new sync.CrossGoroutineMutex relaxes the
requirement (but will not provide lock order checking).
Due to the additional overhead, enforcement is only enabled with the
"checklocks" build tag. Build with this tag using:
bazel build --define=gotags=checklocks ...
From my spot-checking, this has no changed inlining properties when disabled.
Updates #4804
PiperOrigin-RevId: 343370200
|
|
PiperOrigin-RevId: 343196927
|
|
- Make AddressableEndpoint optional for NetworkEndpoint.
Not all NetworkEndpoints need to support addressing (e.g. ARP), so
AddressableEndpoint should only be implemented for protocols that
support addressing such as IPv4 and IPv6.
With this change, tcpip.ErrNotSupported will be returned by the stack
when attempting to modify addresses on a network endpoint that does
not support addressing.
Now that packets are fully handled at the network layer, and (with this
change) addresses are optional for network endpoints, we no longer need
the workaround for ARP where a fake ARP address was added to each NIC
that performs ARP so that packets would be delivered to the ARP layer.
PiperOrigin-RevId: 342722547
|
|
kernel.Task can only be used as context.Context by that Task's task goroutine.
This is violated in at least two places:
- In any case where one thread accesses the /proc/[tid] of any other thread,
passing the kernel.Task for [tid] as the context.Context is incorrect.
- Task.rebuildTraceContext() may be called by Kernel.RebuildTraceContexts()
outside the scope of any task goroutine.
Fix these (as well as a data race on Task.traceContext discovered during the
course of finding the latter).
PiperOrigin-RevId: 342174404
|
|
PiperOrigin-RevId: 340536306
|
|
The default pipe size already matched linux, and is unchanged.
Furthermore `atomicIOBytes` is made a proper constant (as it is in Linux). We
were plumbing usermem.PageSize everywhere, so this is no functional change.
PiperOrigin-RevId: 340497006
|
|
This PR implements /proc/[pid]/mem for `pkg/sentry/fs` (refer to #2716) and `pkg/sentry/fsimpl`.
@majek
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/4060 from lnsp:proc-pid-mem 2caf9021254646f441be618a9bb5528610e44d43
PiperOrigin-RevId: 339369629
|
|
Inode number consistency checks are now skipped in save/restore tests for
reasons described in greatest detail in StatTest.StateDoesntChangeAfterRename.
They pass in VFS1 due to the bug described in new test case
SimpleStatTest.DifferentFilesHaveDifferentDeviceInodeNumberPairs.
Fixes #1663
PiperOrigin-RevId: 338776148
|
|
The sentry page cache stores file contents at page granularity; this is
necessary for memory mappings. Thus file offset ranges passed to
fsutil.FileRangeSet.Fill() must be page-aligned. If the read callback passed to
Fill() returns (partial read, nil error) when reading up to EOF (which is the
case for p9.ClientFile.ReadAt() since 9P's Rread cannot convey both a partial
read and EOF), Fill() will re-invoke the read callback to try to read from EOF
to the end of the containing page, which is harmless but needlessly expensive.
Fix this by handling file size explicitly in fsutil.FileRangeSet.Fill().
PiperOrigin-RevId: 336934075
|
|
This fixes reference leaks related to accidentally forgetting to DecRef()
after calling one or the other.
PiperOrigin-RevId: 336918922
|
|
PiperOrigin-RevId: 336339194
|
|
PiperOrigin-RevId: 336304024
|
|
When a response needs to be sent to an incoming packet, the stack should
consult its neighbour table to determine the remote address's link
address.
When an entry does not exist in the stack's neighbor table, the stack
should queue the packet while link resolution completes. See comments.
PiperOrigin-RevId: 336185457
|
|
This change also adds support to go_stateify for detecting an appropriate
receiver name, avoiding a large number of false positives.
PiperOrigin-RevId: 335994587
|
|
PiperOrigin-RevId: 334478850
|
|
PiperOrigin-RevId: 332760843
|
|
PiperOrigin-RevId: 332548335
|
|
|
|
PiperOrigin-RevId: 332122081
|
|
|
|
test/fuse/benchmark/read_benchmark.cc:34: Failure
Expected: (fuse_prefix) != (nullptr), actual: NULL vs (nullptr)
external/com_google_benchmark/src/benchmark_runner.cc:120: RunInThread:
Check `st.iterations() >= st.max_iterations' failed. Benchmark returned
before State::KeepRunning() returned false!
--- FAIL: Benchmarks_BM_Read/262144/real_time (0.29s)
runner.go:502: test "Benchmarks.BM_Read/262144/real_time" failed
with error exit status 134, want nil
FAIL
|
|
This change adds the following:
- Add support for containerizing syscall tests for FUSE
- Mount tmpfs in the container so we can run benchmarks against it
- Run the server in a background process
- benchmarks for fuse syscall
Co-authored-by: Ridwan Sharif <ridwanmsharif@google.com>
|
|
In Linux, FDSize is fs/proc/array.c:task_state() => struct fdtable::max_fds,
which is set to the underlying array's length in fs/file.c:alloc_fdtable().
Follow-up changes:
- Remove FDTable.GetRefs() and FDTable.GetRefsVFS2(), which are unused.
- Reset FDTable.used to 0 during restore, since the subsequent calls to
FDTable.setAll() increment it again, causing its value to be doubled. (After
this CL, FDTable.used is only used to avoid reallocation in FDTable.GetFDs(),
so this fix is not very visible.)
PiperOrigin-RevId: 331588190
|
|
PiperOrigin-RevId: 331256608
|
|
Fixes an error where in case of a receive buffer larger than the host send
buffer size for a host backed unix dgram socket we would end up swallowing EOF
from recvmsg syscall causing the read() to block forever.
PiperOrigin-RevId: 331192810
|
|
PiperOrigin-RevId: 330554450
|
|
PiperOrigin-RevId: 329825497
|
|
Updates #2972
PiperOrigin-RevId: 329584905
|
|
PiperOrigin-RevId: 329564614
|
|
PiperOrigin-RevId: 328863725
|
|
This does not implement accepting or enforcing any size limit, which will be
more complex and has performance implications; it just returns a fixed non-zero
size.
Updates #1936
PiperOrigin-RevId: 328428588
|
|
PiperOrigin-RevId: 328415633
|
|
Our "Preconditions:" blocks are very useful to determine the input invariants,
but they are bit inconsistent throughout the codebase, which makes them harder
to read (particularly cases with 5+ conditions in a single paragraph).
I've reformatted all of the cases to fit in simple rules:
1. Cases with a single condition are placed on a single line.
2. Cases with multiple conditions are placed in a bulleted list.
This format has been added to the style guide.
I've also mentioned "Postconditions:", though those are much less frequently
used, and all uses already match this style.
PiperOrigin-RevId: 327687465
|
|
This is needed to avoid circular dependencies between the vfs and kernel
packages.
PiperOrigin-RevId: 327355524
|
|
- Merges aleksej-paschenko's with HEAD
- Adds vfs2 support for ip_forward
|
|
/proc/sys/net/ipv4/tcp_recovery is used to enable RACK loss
recovery in TCP.
PiperOrigin-RevId: 325157807
|
|
context is passed to DecRef() and Release() which is
needed for SO_LINGER implementation.
PiperOrigin-RevId: 324672584
|
|
The subsequent systrap changes will need to import memmap from
the platform package.
PiperOrigin-RevId: 323409486
|
|
PiperOrigin-RevId: 322954792
|
|
Now it calls pkt.Data.ToView() when writing the packet. This may require
copying when the packet is large, which puts the worse case in an even worse
situation.
This sent out in a separate preparation change as it requires syscall filter
changes. This change will be followed by the change for the adoption of the new
PacketHeader API.
PiperOrigin-RevId: 321447003
|
|
Updates #2972
PiperOrigin-RevId: 317113059
|
|
Updates #2972
PiperOrigin-RevId: 316942245
|