summaryrefslogtreecommitdiffhomepage
path: root/pkg/sentry/fs
AgeCommit message (Collapse)Author
2021-06-24Internal change.Jamie Liu
PiperOrigin-RevId: 381375705
2021-06-22[syserror] Add conversions to linuxerr with temporary Equals method.Zach Koopmans
Add Equals method to compare syserror and unix.Errno errors to linuxerr errors. This will facilitate removal of syserror definitions in a followup, and finding needed conversions from unix.Errno to linuxerr. PiperOrigin-RevId: 380909667
2021-06-10Add /proc/sys/vm/max_map_countFabricio Voznika
Set it to int32 max because gVisor doesn't have a limit. Fixes #2337 PiperOrigin-RevId: 378722230
2021-06-09Change TODO to NOTE.Nicolas Lacasse
It's in VFS1 code, so we probably will not do it. PiperOrigin-RevId: 378474174
2021-05-25setgid directories for VFS1 tmpfs, overlayfs, and goferfsKevin Krakauer
PiperOrigin-RevId: 375780659
2021-05-18Delete /cloud/gvisor/sandbox/sentry/gofer/opened_write_execute_file metricNayana Bidari
This metric is replaced by /cloud/gvisor/sandbox/sentry/suspicious_operations metric with field value opened_write_execute_file. PiperOrigin-RevId: 374509823
2021-05-14Add new metric for suspicious operations.Nayana Bidari
The new metric contains fields and will replace the below existing metric: - opened_write_execute_file PiperOrigin-RevId: 373884604
2021-05-14Don't read forwarding from netstack in sentryGhanan Gowripalan
https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt: /proc/sys/net/ipv4/* Variables: ip_forward - BOOLEAN 0 - disabled (default) not 0 - enabled Forward Packets between interfaces. This variable is special, its change resets all configuration parameters to their default state (RFC1122 for hosts, RFC1812 for routers) /proc/sys/net/ipv4/ip_forward only does work when its value is changed and always returns the last written value. The last written value may not reflect the current state of the netstack (e.g. when `ip_forward` was written a value of "1" then disable forwarding on an interface) so there is no need for sentry to probe netstack to get the current forwarding state of interfaces. ``` ~$ cat /proc/sys/net/ipv4/ip_forward 0 ~$ sudo bash -c "echo 1 > /proc/sys/net/ipv4/ip_forward" ~$ cat /proc/sys/net/ipv4/ip_forward 1 ~$ sudo sysctl -a | grep ipv4 | grep forward net.ipv4.conf.all.forwarding = 1 net.ipv4.conf.default.forwarding = 1 net.ipv4.conf.eno1.forwarding = 1 net.ipv4.conf.lo.forwarding = 1 net.ipv4.conf.wlp1s0.forwarding = 1 net.ipv4.ip_forward = 1 net.ipv4.ip_forward_update_priority = 1 net.ipv4.ip_forward_use_pmtu = 0 ~$ sudo sysctl -w net.ipv4.conf.wlp1s0.forwarding=0 net.ipv4.conf.wlp1s0.forwarding = 0 ~$ sudo sysctl -a | grep ipv4 | grep forward net.ipv4.conf.all.forwarding = 1 net.ipv4.conf.default.forwarding = 1 net.ipv4.conf.eno1.forwarding = 1 net.ipv4.conf.lo.forwarding = 1 net.ipv4.conf.wlp1s0.forwarding = 0 net.ipv4.ip_forward = 1 net.ipv4.ip_forward_update_priority = 1 net.ipv4.ip_forward_use_pmtu = 0 ~$ cat /proc/sys/net/ipv4/ip_forward 1 ~$ sudo bash -c "echo 1 > /proc/sys/net/ipv4/ip_forward" ~$ sudo sysctl -a | grep ipv4 | grep forward net.ipv4.conf.all.forwarding = 1 net.ipv4.conf.default.forwarding = 1 net.ipv4.conf.eno1.forwarding = 1 net.ipv4.conf.lo.forwarding = 1 net.ipv4.conf.wlp1s0.forwarding = 0 net.ipv4.ip_forward = 1 net.ipv4.ip_forward_update_priority = 1 net.ipv4.ip_forward_use_pmtu = 0 ~$ sudo bash -c "echo 0 > /proc/sys/net/ipv4/ip_forward" ~$ sudo sysctl -a | grep ipv4 | grep forward sysctl: unable to open directory "/proc/sys/fs/binfmt_misc/" net.ipv4.conf.all.forwarding = 0 net.ipv4.conf.default.forwarding = 0 net.ipv4.conf.eno1.forwarding = 0 net.ipv4.conf.lo.forwarding = 0 net.ipv4.conf.wlp1s0.forwarding = 0 net.ipv4.ip_forward = 0 net.ipv4.ip_forward_update_priority = 1 net.ipv4.ip_forward_use_pmtu = 0 ~$ cat /proc/sys/net/ipv4/ip_forward 0 ``` In the above example we can see that writing "1" to /proc/sys/net/ipv4/ip_forward configures the stack to be a router (all interfaces are configured to enable forwarding). However, if we manually update an interace (`wlp1s0`) to not forward packets, /proc/sys/net/ipv4/ip_forward continues to return the last written value of "1", even though not all interfaces will forward packets. Also note that writing the same value twice has no effect; work is performed iff the value changes. This change also removes the 'unset' state from sentry's ip forwarding data structures as an 'unset' ip forwarding value is the same as leaving forwarding disabled as the stack is always brought up with forwarding initially disabled; disabling forwarding on a newly created stack is a no-op. PiperOrigin-RevId: 373853106
2021-04-20Move SO_RCVBUF to socketops.Nayana Bidari
Fixes #2926, #674 PiperOrigin-RevId: 369457123
2021-03-29[syserror] Split usermem packageZach Koopmans
Split usermem package to help remove syserror dependency in go_marshal. New hostarch package contains code not dependent on syserror. PiperOrigin-RevId: 365651233
2021-03-25Use seqfile.SeqHandles correctly in VFS1 /proc/net/.Jamie Liu
Before this change: ``` $ docker run --runtime=runsc --rm -it -v ~/tmp:/hosttmp ubuntu:focal /hosttmp/issue5732 --bytes1=128 --bytes2=1024 #1: read(128) = 128 #2: read(1024) = EOF $ docker run --runtime=runsc-vfs2 --rm -it -v ~/tmp:/hosttmp ubuntu:focal /hosttmp/issue5732 --bytes1=128 --bytes2=1024 #1: read(128) = 128 #2: read(1024) = 256 ``` After this change: ``` $ docker run --runtime=runsc --rm -it -v ~/tmp:/hosttmp ubuntu:focal /hosttmp/issue5732 --bytes1=128 --bytes2=1024 #1: read(128) = 128 #2: read(1024) = 256 $ docker run --runtime=runsc-vfs2 --rm -it -v ~/tmp:/hosttmp ubuntu:focal /hosttmp/issue5732 --bytes1=128 --bytes2=1024 #1: read(128) = 128 #2: read(1024) = 256 ``` Fixes #5732 PiperOrigin-RevId: 365178386
2021-03-24Add POLLRDNORM/POLLWRNORM support.Bhasker Hariharan
On Linux these are meant to be equivalent to POLLIN/POLLOUT. Rather than hack these on in sys_poll etc it felt cleaner to just cleanup the call sites to notify for both events. This is what linux does as well. Fixes #5544 PiperOrigin-RevId: 364859977
2021-03-22Avoid calling sync on each write in writethrough mode.Nicolas Lacasse
PiperOrigin-RevId: 364370595
2021-03-15Make netstack (//pkg/tcpip) buildable for 32 bitKevin Krakauer
Doing so involved breaking dependencies between //pkg/tcpip and the rest of gVisor, which are discouraged anyways. Tested on the Go branch via: gvisor.dev/gvisor/pkg/tcpip/... Addresses #1446. PiperOrigin-RevId: 363081778
2021-03-08Implement /proc/sys/net/ipv4/ip_local_port_rangeKevin Krakauer
Speeds up the socket stress tests by a couple orders of magnitude. PiperOrigin-RevId: 361721050
2021-03-03Add checklocks analyzer.Bhasker Hariharan
This validates that struct fields if annotated with "// checklocks:mu" where "mu" is a mutex field in the same struct then access to the field is only done with "mu" locked. All types that are guarded by a mutex must be annotated with // +checklocks:<mutex field name> For more details please refer to README.md. PiperOrigin-RevId: 360729328
2021-03-03[op] Replace syscall package usage with golang.org/x/sys/unix in pkg/.Ayush Ranjan
The syscall package has been deprecated in favor of golang.org/x/sys. Note that syscall is still used in the following places: - pkg/sentry/socket/hostinet/stack.go: some netlink related functionalities are not yet available in golang.org/x/sys. - syscall.Stat_t is still used in some places because os.FileInfo.Sys() still returns it and not unix.Stat_t. Updates #214 PiperOrigin-RevId: 360701387
2021-02-17Check for directory emptiness in VFS1 overlay rmdir().Jamie Liu
Note that this CL reorders overlayEntry.copyMu before overlayEntry.dirCacheMu in the overlayFileOperations.IterateDir() => readdirEntries() path - but this lock ordering is already required by overlayRemove/Bind() => overlayEntry.markDirectoryDirty(), so this actually just fixes an inconsistency. PiperOrigin-RevId: 358047121
2021-02-11Assign controlling terminal when tty is opened and support NOCTTYKevin Krakauer
PiperOrigin-RevId: 357015186
2021-02-09Add support for setting SO_SNDBUF for unix domain sockets.Bhasker Hariharan
The limits for snd/rcv buffers for unix domain socket is controlled by the following sysctls on linux - net.core.rmem_default - net.core.rmem_max - net.core.wmem_default - net.core.wmem_max Today in gVisor we do not expose these sysctls but we do support setting the equivalent in netstack via stack.Options() method. But AF_UNIX sockets in gVisor can be used without netstack, with hostinet or even without any networking stack at all. Which means ideally these sysctls need to live as globals in gVisor. But rather than make this a big change for now we hardcode the limits in the AF_UNIX implementation itself (which in itself is better than where we were before) where it SO_SNDBUF was hardcoded to 16KiB. Further we bump the initial limit to a default value of 208 KiB to match linux from the paltry 16 KiB we use today. Updates #5132 PiperOrigin-RevId: 356665498
2021-02-09Collapse code that always returns errorTamir Duberstein
PiperOrigin-RevId: 356536548
2021-01-28Change tcpip.Error to an interfaceTamir Duberstein
This makes it possible to add data to types that implement tcpip.Error. ErrBadLinkEndpoint is removed as it is unused. PiperOrigin-RevId: 354437314
2021-01-26Implement error on pointersTamir Duberstein
This improves type-assertion safety. PiperOrigin-RevId: 353931228
2021-01-22Implement F_GETLK fcntl.Dean Deng
Fixes #5113. PiperOrigin-RevId: 353313374
2021-01-12Fix simple mistakes identified by goreportcard.Adin Scannell
These are primarily simplification and lint mistakes. However, minor fixes are also included and tests added where appropriate. PiperOrigin-RevId: 351425971
2020-12-23vfs1: don't allow to open socket filesAndrei Vagin
open() has to return ENXIO in this case. O_PATH isn't supported by vfs1. PiperOrigin-RevId: 348820478
2020-12-11Remove existing nogo exceptions.Adin Scannell
PiperOrigin-RevId: 347047550
2020-12-04Require sync.RWMutex to lock and unlock from the same goroutineMichael Pratt
This is the RWMutex equivalent to the preceding sync.Mutex CL. Updates #4804 PiperOrigin-RevId: 345681051
2020-12-02Add /proc/sys/kernel/sem.Jing Chen
PiperOrigin-RevId: 345178956
2020-11-19Require sync.Mutex to lock and unlock from the same goroutineMichael Pratt
We would like to track locks ordering to detect ordering violations. Detecting violations is much simpler if mutexes must be unlocked by the same goroutine that locked them. Thus, as a first step to tracking lock ordering, add this lock/unlock requirement to gVisor's sync.Mutex. This is more strict than the Go standard library's sync.Mutex, but initial testing indicates only a single lock that is used across goroutines. The new sync.CrossGoroutineMutex relaxes the requirement (but will not provide lock order checking). Due to the additional overhead, enforcement is only enabled with the "checklocks" build tag. Build with this tag using: bazel build --define=gotags=checklocks ... From my spot-checking, this has no changed inlining properties when disabled. Updates #4804 PiperOrigin-RevId: 343370200
2020-11-18Port filesystem metrics to VFS2.Jamie Liu
PiperOrigin-RevId: 343196927
2020-11-16Remove ARP address workaroundGhanan Gowripalan
- Make AddressableEndpoint optional for NetworkEndpoint. Not all NetworkEndpoints need to support addressing (e.g. ARP), so AddressableEndpoint should only be implemented for protocols that support addressing such as IPv4 and IPv6. With this change, tcpip.ErrNotSupported will be returned by the stack when attempting to modify addresses on a network endpoint that does not support addressing. Now that packets are fully handled at the network layer, and (with this change) addresses are optional for network endpoints, we no longer need the workaround for ARP where a fake ARP address was added to each NIC that performs ARP so that packets would be delivered to the ARP layer. PiperOrigin-RevId: 342722547
2020-11-12Fix misuses of kernel.Task as context.Context.Jamie Liu
kernel.Task can only be used as context.Context by that Task's task goroutine. This is violated in at least two places: - In any case where one thread accesses the /proc/[tid] of any other thread, passing the kernel.Task for [tid] as the context.Context is incorrect. - Task.rebuildTraceContext() may be called by Kernel.RebuildTraceContexts() outside the scope of any task goroutine. Fix these (as well as a data race on Task.traceContext discovered during the course of finding the latter). PiperOrigin-RevId: 342174404
2020-11-03Fix more nogo testsTing-Yu Wang
PiperOrigin-RevId: 340536306
2020-11-03Make pipe min/max sizes match linux.Nicolas Lacasse
The default pipe size already matched linux, and is unchanged. Furthermore `atomicIOBytes` is made a proper constant (as it is in Linux). We were plumbing usermem.PageSize everywhere, so this is no functional change. PiperOrigin-RevId: 340497006
2020-10-27Implement /proc/[pid]/memLennart
This PR implements /proc/[pid]/mem for `pkg/sentry/fs` (refer to #2716) and `pkg/sentry/fsimpl`. @majek COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/4060 from lnsp:proc-pid-mem 2caf9021254646f441be618a9bb5528610e44d43 PiperOrigin-RevId: 339369629
2020-10-23Support VFS2 save/restore.Jamie Liu
Inode number consistency checks are now skipped in save/restore tests for reasons described in greatest detail in StatTest.StateDoesntChangeAfterRename. They pass in VFS1 due to the bug described in new test case SimpleStatTest.DifferentFilesHaveDifferentDeviceInodeNumberPairs. Fixes #1663 PiperOrigin-RevId: 338776148
2020-10-13Don't read beyond EOF when inserting into sentry page cache.Jamie Liu
The sentry page cache stores file contents at page granularity; this is necessary for memory mappings. Thus file offset ranges passed to fsutil.FileRangeSet.Fill() must be page-aligned. If the read callback passed to Fill() returns (partial read, nil error) when reading up to EOF (which is the case for p9.ClientFile.ReadAt() since 9P's Rread cannot convey both a partial read and EOF), Fill() will re-invoke the read callback to try to read from EOF to the end of the containing page, which is harmless but needlessly expensive. Fix this by handling file size explicitly in fsutil.FileRangeSet.Fill(). PiperOrigin-RevId: 336934075
2020-10-13[vfs2] Don't take reference in Task.MountNamespaceVFS2 and MountNamespace.Root.Dean Deng
This fixes reference leaks related to accidentally forgetting to DecRef() after calling one or the other. PiperOrigin-RevId: 336918922
2020-10-09Automated rollback of changelist 336304024Ghanan Gowripalan
PiperOrigin-RevId: 336339194
2020-10-09Automated rollback of changelist 336185457Bhasker Hariharan
PiperOrigin-RevId: 336304024
2020-10-08Do not resolve routes immediatelyGhanan Gowripalan
When a response needs to be sent to an incoming packet, the stack should consult its neighbour table to determine the remote address's link address. When an entry does not exist in the stack's neighbor table, the stack should queue the packet while link resolution completes. See comments. PiperOrigin-RevId: 336185457
2020-10-07Add staticcheck and staticstyle analyzers.Adin Scannell
This change also adds support to go_stateify for detecting an appropriate receiver name, avoiding a large number of false positives. PiperOrigin-RevId: 335994587
2020-09-29Add /proc/[pid]/cwdFabricio Voznika
PiperOrigin-RevId: 334478850
2020-09-20Merge pull request #3651 from ianlewis:ip-forwardinggVisor bot
PiperOrigin-RevId: 332760843
2020-09-18Merge pull request #3989 from jinmouil:feature/fuse-fixgVisor bot
PiperOrigin-RevId: 332548335
2020-09-18fuse: update design doc with I/O implementationJinmou Li
2020-09-16Merge pull request #3934 from avagin:feature/fusegVisor bot
PiperOrigin-RevId: 332122081
2020-09-16Update fuse.md design doc with design detailsJinmou Li
2020-09-16Revert "fuse: add benchmarking support for FUSE"Andrei Vagin
test/fuse/benchmark/read_benchmark.cc:34: Failure Expected: (fuse_prefix) != (nullptr), actual: NULL vs (nullptr) external/com_google_benchmark/src/benchmark_runner.cc:120: RunInThread: Check `st.iterations() >= st.max_iterations' failed. Benchmark returned before State::KeepRunning() returned false! --- FAIL: Benchmarks_BM_Read/262144/real_time (0.29s) runner.go:502: test "Benchmarks.BM_Read/262144/real_time" failed with error exit status 134, want nil FAIL
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 20:17:17 +0000