| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
|
|
PiperOrigin-RevId: 396042572
|
|
|
|
Document this ordering in mm/mm.go.
PiperOrigin-RevId: 393413203
|
|
|
|
Convert remaining public errors (e.g. EINTR) from syserror to linuxerr.
PiperOrigin-RevId: 390471763
|
|
|
|
Update the following from syserror to the linuxerr equivalent:
EEXIST
EFAULT
ENOTDIR
ENOTTY
EOPNOTSUPP
ERANGE
ESRCH
PiperOrigin-RevId: 384329869
|
|
|
|
Update all instances of the above errors to the faster linuxerr implementation.
With the temporary linuxerr.Equals(), no logical changes are made.
PiperOrigin-RevId: 382306655
|
|
|
|
Remove three syserror entries duplicated in linuxerr. Because of the
linuxerr.Equals method, this is a mere change of return values from
syserror to linuxerr definitions.
Done with only these three errnos as CLs removing all grow to a significantly
large size.
PiperOrigin-RevId: 382173835
|
|
|
|
Add Equals method to compare syserror and unix.Errno errors to linuxerr errors.
This will facilitate removal of syserror definitions in a followup, and
finding needed conversions from unix.Errno to linuxerr.
PiperOrigin-RevId: 380909667
|
|
|
|
Set it to int32 max because gVisor doesn't have a limit.
Fixes #2337
PiperOrigin-RevId: 378722230
|
|
|
|
https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt:
/proc/sys/net/ipv4/* Variables:
ip_forward - BOOLEAN
0 - disabled (default)
not 0 - enabled
Forward Packets between interfaces.
This variable is special, its change resets all configuration
parameters to their default state (RFC1122 for hosts, RFC1812
for routers)
/proc/sys/net/ipv4/ip_forward only does work when its value is changed
and always returns the last written value. The last written value may
not reflect the current state of the netstack (e.g. when `ip_forward`
was written a value of "1" then disable forwarding on an interface)
so there is no need for sentry to probe netstack to get the current
forwarding state of interfaces.
```
~$ cat /proc/sys/net/ipv4/ip_forward
0
~$ sudo bash -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
~$ cat /proc/sys/net/ipv4/ip_forward
1
~$ sudo sysctl -a | grep ipv4 | grep forward
net.ipv4.conf.all.forwarding = 1
net.ipv4.conf.default.forwarding = 1
net.ipv4.conf.eno1.forwarding = 1
net.ipv4.conf.lo.forwarding = 1
net.ipv4.conf.wlp1s0.forwarding = 1
net.ipv4.ip_forward = 1
net.ipv4.ip_forward_update_priority = 1
net.ipv4.ip_forward_use_pmtu = 0
~$ sudo sysctl -w net.ipv4.conf.wlp1s0.forwarding=0
net.ipv4.conf.wlp1s0.forwarding = 0
~$ sudo sysctl -a | grep ipv4 | grep forward
net.ipv4.conf.all.forwarding = 1
net.ipv4.conf.default.forwarding = 1
net.ipv4.conf.eno1.forwarding = 1
net.ipv4.conf.lo.forwarding = 1
net.ipv4.conf.wlp1s0.forwarding = 0
net.ipv4.ip_forward = 1
net.ipv4.ip_forward_update_priority = 1
net.ipv4.ip_forward_use_pmtu = 0
~$ cat /proc/sys/net/ipv4/ip_forward
1
~$ sudo bash -c "echo 1 > /proc/sys/net/ipv4/ip_forward"
~$ sudo sysctl -a | grep ipv4 | grep forward
net.ipv4.conf.all.forwarding = 1
net.ipv4.conf.default.forwarding = 1
net.ipv4.conf.eno1.forwarding = 1
net.ipv4.conf.lo.forwarding = 1
net.ipv4.conf.wlp1s0.forwarding = 0
net.ipv4.ip_forward = 1
net.ipv4.ip_forward_update_priority = 1
net.ipv4.ip_forward_use_pmtu = 0
~$ sudo bash -c "echo 0 > /proc/sys/net/ipv4/ip_forward"
~$ sudo sysctl -a | grep ipv4 | grep forward
sysctl: unable to open directory "/proc/sys/fs/binfmt_misc/"
net.ipv4.conf.all.forwarding = 0
net.ipv4.conf.default.forwarding = 0
net.ipv4.conf.eno1.forwarding = 0
net.ipv4.conf.lo.forwarding = 0
net.ipv4.conf.wlp1s0.forwarding = 0
net.ipv4.ip_forward = 0
net.ipv4.ip_forward_update_priority = 1
net.ipv4.ip_forward_use_pmtu = 0
~$ cat /proc/sys/net/ipv4/ip_forward
0
```
In the above example we can see that writing "1" to
/proc/sys/net/ipv4/ip_forward configures the stack to be a router (all
interfaces are configured to enable forwarding). However, if we manually
update an interace (`wlp1s0`) to not forward packets,
/proc/sys/net/ipv4/ip_forward continues to return the last written value
of "1", even though not all interfaces will forward packets.
Also note that writing the same value twice has no effect; work is
performed iff the value changes.
This change also removes the 'unset' state from sentry's ip forwarding
data structures as an 'unset' ip forwarding value is the same as leaving
forwarding disabled as the stack is always brought up with forwarding
initially disabled; disabling forwarding on a newly created stack is a
no-op.
PiperOrigin-RevId: 373853106
|
|
|
|
Split usermem package to help remove syserror dependency in go_marshal.
New hostarch package contains code not dependent on syserror.
PiperOrigin-RevId: 365651233
|
|
|
|
Before this change:
```
$ docker run --runtime=runsc --rm -it -v ~/tmp:/hosttmp ubuntu:focal /hosttmp/issue5732 --bytes1=128 --bytes2=1024
#1: read(128) = 128
#2: read(1024) = EOF
$ docker run --runtime=runsc-vfs2 --rm -it -v ~/tmp:/hosttmp ubuntu:focal /hosttmp/issue5732 --bytes1=128 --bytes2=1024
#1: read(128) = 128
#2: read(1024) = 256
```
After this change:
```
$ docker run --runtime=runsc --rm -it -v ~/tmp:/hosttmp ubuntu:focal /hosttmp/issue5732 --bytes1=128 --bytes2=1024
#1: read(128) = 128
#2: read(1024) = 256
$ docker run --runtime=runsc-vfs2 --rm -it -v ~/tmp:/hosttmp ubuntu:focal /hosttmp/issue5732 --bytes1=128 --bytes2=1024
#1: read(128) = 128
#2: read(1024) = 256
```
Fixes #5732
PiperOrigin-RevId: 365178386
|
|
|
|
|
|
Speeds up the socket stress tests by a couple orders of magnitude.
PiperOrigin-RevId: 361721050
|
|
|
|
PiperOrigin-RevId: 345178956
|
|
|
|
kernel.Task can only be used as context.Context by that Task's task goroutine.
This is violated in at least two places:
- In any case where one thread accesses the /proc/[tid] of any other thread,
passing the kernel.Task for [tid] as the context.Context is incorrect.
- Task.rebuildTraceContext() may be called by Kernel.RebuildTraceContexts()
outside the scope of any task goroutine.
Fix these (as well as a data race on Task.traceContext discovered during the
course of finding the latter).
PiperOrigin-RevId: 342174404
|
|
|
|
PiperOrigin-RevId: 340536306
|
|
|
|
This PR implements /proc/[pid]/mem for `pkg/sentry/fs` (refer to #2716) and `pkg/sentry/fsimpl`.
@majek
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/4060 from lnsp:proc-pid-mem 2caf9021254646f441be618a9bb5528610e44d43
PiperOrigin-RevId: 339369629
|
|
|
|
|
|
|
|
PiperOrigin-RevId: 334478850
|
|
|
|
PiperOrigin-RevId: 332760843
|
|
|
|
In Linux, FDSize is fs/proc/array.c:task_state() => struct fdtable::max_fds,
which is set to the underlying array's length in fs/file.c:alloc_fdtable().
Follow-up changes:
- Remove FDTable.GetRefs() and FDTable.GetRefsVFS2(), which are unused.
- Reset FDTable.used to 0 during restore, since the subsequent calls to
FDTable.setAll() increment it again, causing its value to be doubled. (After
this CL, FDTable.used is only used to avoid reallocation in FDTable.GetFDs(),
so this fix is not very visible.)
PiperOrigin-RevId: 331588190
|
|
- Merges aleksej-paschenko's with HEAD
- Adds vfs2 support for ip_forward
|
|
|
|
/proc/sys/net/ipv4/tcp_recovery is used to enable RACK loss
recovery in TCP.
PiperOrigin-RevId: 325157807
|
|
|
|
context is passed to DecRef() and Release() which is
needed for SO_LINGER implementation.
PiperOrigin-RevId: 324672584
|
|
|
|
|
