summaryrefslogtreecommitdiffhomepage
path: root/pkg/sentry/fs/proc
AgeCommit message (Collapse)Author
2021-08-27Fix lock order violations: mm.mappingMu > Task.mu.Nicolas Lacasse
Document this ordering in mm/mm.go. PiperOrigin-RevId: 393413203
2021-08-12[syserror] Convert remaining syserror definitions to linuxerr.Zach Koopmans
Convert remaining public errors (e.g. EINTR) from syserror to linuxerr. PiperOrigin-RevId: 390471763
2021-07-12[syserror] Update syserror to linuxerr for more errors.Zach Koopmans
Update the following from syserror to the linuxerr equivalent: EEXIST EFAULT ENOTDIR ENOTTY EOPNOTSUPP ERANGE ESRCH PiperOrigin-RevId: 384329869
2021-06-30[syserror] Update syserror to linuxerr for EACCES, EBADF, and EPERM.Zach Koopmans
Update all instances of the above errors to the faster linuxerr implementation. With the temporary linuxerr.Equals(), no logical changes are made. PiperOrigin-RevId: 382306655
2021-06-29[syserror] Change syserror to linuxerr for E2BIG, EADDRINUSE, and EINVALZach Koopmans
Remove three syserror entries duplicated in linuxerr. Because of the linuxerr.Equals method, this is a mere change of return values from syserror to linuxerr definitions. Done with only these three errnos as CLs removing all grow to a significantly large size. PiperOrigin-RevId: 382173835
2021-06-22[syserror] Add conversions to linuxerr with temporary Equals method.Zach Koopmans
Add Equals method to compare syserror and unix.Errno errors to linuxerr errors. This will facilitate removal of syserror definitions in a followup, and finding needed conversions from unix.Errno to linuxerr. PiperOrigin-RevId: 380909667
2021-06-10Add /proc/sys/vm/max_map_countFabricio Voznika
Set it to int32 max because gVisor doesn't have a limit. Fixes #2337 PiperOrigin-RevId: 378722230
2021-05-14Don't read forwarding from netstack in sentryGhanan Gowripalan
https://www.kernel.org/doc/Documentation/networking/ip-sysctl.txt: /proc/sys/net/ipv4/* Variables: ip_forward - BOOLEAN 0 - disabled (default) not 0 - enabled Forward Packets between interfaces. This variable is special, its change resets all configuration parameters to their default state (RFC1122 for hosts, RFC1812 for routers) /proc/sys/net/ipv4/ip_forward only does work when its value is changed and always returns the last written value. The last written value may not reflect the current state of the netstack (e.g. when `ip_forward` was written a value of "1" then disable forwarding on an interface) so there is no need for sentry to probe netstack to get the current forwarding state of interfaces. ``` ~$ cat /proc/sys/net/ipv4/ip_forward 0 ~$ sudo bash -c "echo 1 > /proc/sys/net/ipv4/ip_forward" ~$ cat /proc/sys/net/ipv4/ip_forward 1 ~$ sudo sysctl -a | grep ipv4 | grep forward net.ipv4.conf.all.forwarding = 1 net.ipv4.conf.default.forwarding = 1 net.ipv4.conf.eno1.forwarding = 1 net.ipv4.conf.lo.forwarding = 1 net.ipv4.conf.wlp1s0.forwarding = 1 net.ipv4.ip_forward = 1 net.ipv4.ip_forward_update_priority = 1 net.ipv4.ip_forward_use_pmtu = 0 ~$ sudo sysctl -w net.ipv4.conf.wlp1s0.forwarding=0 net.ipv4.conf.wlp1s0.forwarding = 0 ~$ sudo sysctl -a | grep ipv4 | grep forward net.ipv4.conf.all.forwarding = 1 net.ipv4.conf.default.forwarding = 1 net.ipv4.conf.eno1.forwarding = 1 net.ipv4.conf.lo.forwarding = 1 net.ipv4.conf.wlp1s0.forwarding = 0 net.ipv4.ip_forward = 1 net.ipv4.ip_forward_update_priority = 1 net.ipv4.ip_forward_use_pmtu = 0 ~$ cat /proc/sys/net/ipv4/ip_forward 1 ~$ sudo bash -c "echo 1 > /proc/sys/net/ipv4/ip_forward" ~$ sudo sysctl -a | grep ipv4 | grep forward net.ipv4.conf.all.forwarding = 1 net.ipv4.conf.default.forwarding = 1 net.ipv4.conf.eno1.forwarding = 1 net.ipv4.conf.lo.forwarding = 1 net.ipv4.conf.wlp1s0.forwarding = 0 net.ipv4.ip_forward = 1 net.ipv4.ip_forward_update_priority = 1 net.ipv4.ip_forward_use_pmtu = 0 ~$ sudo bash -c "echo 0 > /proc/sys/net/ipv4/ip_forward" ~$ sudo sysctl -a | grep ipv4 | grep forward sysctl: unable to open directory "/proc/sys/fs/binfmt_misc/" net.ipv4.conf.all.forwarding = 0 net.ipv4.conf.default.forwarding = 0 net.ipv4.conf.eno1.forwarding = 0 net.ipv4.conf.lo.forwarding = 0 net.ipv4.conf.wlp1s0.forwarding = 0 net.ipv4.ip_forward = 0 net.ipv4.ip_forward_update_priority = 1 net.ipv4.ip_forward_use_pmtu = 0 ~$ cat /proc/sys/net/ipv4/ip_forward 0 ``` In the above example we can see that writing "1" to /proc/sys/net/ipv4/ip_forward configures the stack to be a router (all interfaces are configured to enable forwarding). However, if we manually update an interace (`wlp1s0`) to not forward packets, /proc/sys/net/ipv4/ip_forward continues to return the last written value of "1", even though not all interfaces will forward packets. Also note that writing the same value twice has no effect; work is performed iff the value changes. This change also removes the 'unset' state from sentry's ip forwarding data structures as an 'unset' ip forwarding value is the same as leaving forwarding disabled as the stack is always brought up with forwarding initially disabled; disabling forwarding on a newly created stack is a no-op. PiperOrigin-RevId: 373853106
2021-03-29[syserror] Split usermem packageZach Koopmans
Split usermem package to help remove syserror dependency in go_marshal. New hostarch package contains code not dependent on syserror. PiperOrigin-RevId: 365651233
2021-03-25Use seqfile.SeqHandles correctly in VFS1 /proc/net/.Jamie Liu
Before this change: ``` $ docker run --runtime=runsc --rm -it -v ~/tmp:/hosttmp ubuntu:focal /hosttmp/issue5732 --bytes1=128 --bytes2=1024 #1: read(128) = 128 #2: read(1024) = EOF $ docker run --runtime=runsc-vfs2 --rm -it -v ~/tmp:/hosttmp ubuntu:focal /hosttmp/issue5732 --bytes1=128 --bytes2=1024 #1: read(128) = 128 #2: read(1024) = 256 ``` After this change: ``` $ docker run --runtime=runsc --rm -it -v ~/tmp:/hosttmp ubuntu:focal /hosttmp/issue5732 --bytes1=128 --bytes2=1024 #1: read(128) = 128 #2: read(1024) = 256 $ docker run --runtime=runsc-vfs2 --rm -it -v ~/tmp:/hosttmp ubuntu:focal /hosttmp/issue5732 --bytes1=128 --bytes2=1024 #1: read(128) = 128 #2: read(1024) = 256 ``` Fixes #5732 PiperOrigin-RevId: 365178386
2021-03-08Implement /proc/sys/net/ipv4/ip_local_port_rangeKevin Krakauer
Speeds up the socket stress tests by a couple orders of magnitude. PiperOrigin-RevId: 361721050
2020-12-02Add /proc/sys/kernel/sem.Jing Chen
PiperOrigin-RevId: 345178956
2020-11-12Fix misuses of kernel.Task as context.Context.Jamie Liu
kernel.Task can only be used as context.Context by that Task's task goroutine. This is violated in at least two places: - In any case where one thread accesses the /proc/[tid] of any other thread, passing the kernel.Task for [tid] as the context.Context is incorrect. - Task.rebuildTraceContext() may be called by Kernel.RebuildTraceContexts() outside the scope of any task goroutine. Fix these (as well as a data race on Task.traceContext discovered during the course of finding the latter). PiperOrigin-RevId: 342174404
2020-11-03Fix more nogo testsTing-Yu Wang
PiperOrigin-RevId: 340536306
2020-10-27Implement /proc/[pid]/memLennart
This PR implements /proc/[pid]/mem for `pkg/sentry/fs` (refer to #2716) and `pkg/sentry/fsimpl`. @majek COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/4060 from lnsp:proc-pid-mem 2caf9021254646f441be618a9bb5528610e44d43 PiperOrigin-RevId: 339369629
2020-09-29Add /proc/[pid]/cwdFabricio Voznika
PiperOrigin-RevId: 334478850
2020-09-20Merge pull request #3651 from ianlewis:ip-forwardinggVisor bot
PiperOrigin-RevId: 332760843
2020-09-14Correct FDSize in /proc/[pid]/status.Jamie Liu
In Linux, FDSize is fs/proc/array.c:task_state() => struct fdtable::max_fds, which is set to the underlying array's length in fs/file.c:alloc_fdtable(). Follow-up changes: - Remove FDTable.GetRefs() and FDTable.GetRefsVFS2(), which are unused. - Reset FDTable.used to 0 during restore, since the subsequent calls to FDTable.setAll() increment it again, causing its value to be doubled. (After this CL, FDTable.used is only used to avoid reallocation in FDTable.GetFDs(), so this fix is not very visible.) PiperOrigin-RevId: 331588190
2020-08-17Merge branch 'master' into ip-forwardingIan Lewis
- Merges aleksej-paschenko's with HEAD - Adds vfs2 support for ip_forward
2020-08-05Add loss recovery option for TCP.Nayana Bidari
/proc/sys/net/ipv4/tcp_recovery is used to enable RACK loss recovery in TCP. PiperOrigin-RevId: 325157807
2020-08-03Plumbing context.Context to DecRef() and Release().Nayana Bidari
context is passed to DecRef() and Release() which is needed for SO_LINGER implementation. PiperOrigin-RevId: 324672584
2020-05-06Add maximum memory limit.Nicolas Lacasse
PiperOrigin-RevId: 310179277
2020-04-21Misc VFS2 fixesFabricio Voznika
- Fix defer operation ordering in kernfs.Filesystem.AccessAt() - Add AT_NULL entry in proc/pid/auvx - Fix line padding in /proc/pid/maps - Fix linux_dirent serialization for getdents(2) - Remove file creation flags from vfs.FileDescription.statusFlags() Updates #1193, #1035 PiperOrigin-RevId: 307704159
2020-04-09Merge pull request #2253 from amscanne:nogogVisor bot
PiperOrigin-RevId: 305807868
2020-04-08Enable SubprocessExited and SubprocessZombie for gVisorFabricio Voznika
Updates #164 PiperOrigin-RevId: 305544029
2020-04-08Fix all copy locks violations.Adin Scannell
This required minor restructuring of how system call tables were saved and restored, but it makes way more sense this way. Updates #2243
2020-04-02Fix typo in TODO comments.Dean Deng
PiperOrigin-RevId: 304508083
2020-03-13Fix oom_score_adj.Jamie Liu
- Make oomScoreAdj a ThreadGroup field (Linux: signal_struct::oom_score_adj). - Avoid deadlock caused by Task.OOMScoreAdj()/SetOOMScoreAdj() locking Task.mu and TaskSet.mu in the wrong order (via Task.ExitState()). PiperOrigin-RevId: 300814698
2020-03-09Move /proc/net to /proc/PID/net, and make /proc/net -> /proc/self/net.Ting-Yu Wang
Issue #1833 PiperOrigin-RevId: 299998105
2020-03-05Stub oom_score_adj and oom_score.Ian Lewis
Adds an oom_score_adj and oom_score proc file stub. oom_score_adj accepts writes of values -1000 to 1000 and persists the value with the task. New tasks inherit the parent's oom_score_adj. oom_score is a read-only stub that always returns the value '0'. Issue #202 PiperOrigin-RevId: 299245355
2020-02-25Fix mount refcount issue.Adin Scannell
Each mount is holds a reference on a root Dirent, but the mount itself may live beyond it's own reference. This means that a call to Root() can come after the associated reference has been dropped. Instead of introducing a separate layer of references for mount objects, we simply change the Root() method to use TryIncRef() and allow it to return nil if the mount is already gone. This requires updating a small number of callers and minimizes the change (since VFSv2 will replace this code shortly). PiperOrigin-RevId: 297174230
2020-02-20Initial network namespace support.gVisor bot
TCP/IP will work with netstack networking. hostinet doesn't work, and sockets will have the same behavior as it is now. Before the userspace is able to create device, the default loopback device can be used to test. /proc/net and /sys/net will still be connected to the root network stack; this is the same behavior now. Issue #1833 PiperOrigin-RevId: 296309389
2020-02-14Plumb VFS2 inside the SentrygVisor bot
- Added fsbridge package with interface that can be used to open and read from VFS1 and VFS2 files. - Converted ELF loader to use fsbridge - Added VFS2 types to FSContext - Added vfs.MountNamespace to ThreadGroup Updates #1623 PiperOrigin-RevId: 295183950
2020-02-05Add notes to relevant tests.Adin Scannell
These were out-of-band notes that can help provide additional context and simplify automated imports. PiperOrigin-RevId: 293525915
2020-01-27Update package locations.Adin Scannell
Because the abi will depend on the core types for marshalling (usermem, context, safemem, safecopy), these need to be flattened from the sentry directory. These packages contain no sentry-specific details. PiperOrigin-RevId: 291811289
2020-01-27Standardize on tools directory.Adin Scannell
PiperOrigin-RevId: 291745021
2020-01-21Add line break to /proc/net filesFabricio Voznika
Some files were missing the last line break. PiperOrigin-RevId: 290808898
2020-01-18Include the cgroup name in the superblock options in /proc/self/mountinfo.Nicolas Lacasse
Java 11 parses /proc/self/mountinfo for cgroup information. Java 11.0.4 uses the mount path to determine what cgroups existed, but Java 11.0.5 reads the cgroup names from the superblock options. This CL adds the cgroup name to the superblock options if the filesystem type is "cgroup". Since gVisor doesn't actually support cgroups yet, we just infer the cgroup name from the path. PiperOrigin-RevId: 290434323
2020-01-16Remove unused rpcinet.Adin Scannell
PiperOrigin-RevId: 290198756
2020-01-16Add IfChange/ThenChange reminders in fs/procFabricio Voznika
There is a lot of code duplication for VFSv2 and this serves as remind to keep the copies in sync. Updates #1195 PiperOrigin-RevId: 290139234
2020-01-16Add remaining /proc/* and /proc/sys/* filesFabricio Voznika
Except for one under /proc/sys/net/ipv4/tcp_sack. /proc/pid/* is still incomplete. Updates #1195 PiperOrigin-RevId: 290120438
2020-01-09New sync package.Ian Gudger
* Rename syncutil to sync. * Add aliases to sync types. * Replace existing usage of standard library sync package. This will make it easier to swap out synchronization primitives. For example, this will allow us to use primitives from github.com/sasha-s/go-deadlock to check for lock ordering violations. Updates #1472 PiperOrigin-RevId: 289033387
2019-12-18Add Mems_allowed to /proc/PID/statusMichael Pratt
PiperOrigin-RevId: 286248378
2019-12-05Create correct file for /proc/[pid]/task/[tid]/ioZach Koopmans
PiperOrigin-RevId: 284038840
2019-12-03Fix printing /proc/[pid]/io for /proc/[pid]/task/[tid]/io.Zach Koopmans
PiperOrigin-RevId: 283630669
2019-11-26Allow open(O_TRUNC) and (f)truncate for proc files.Ian Lewis
This allows writable proc and devices files to be opened with O_CREAT|O_TRUNC. This is encountered most frequently when interacting with proc or devices files via the command line. e.g. $ echo 8192 1048576 4194304 > /proc/sys/net/ipv4/tcp_rmem Also adds a test to test the behavior of open(O_TRUNC), truncate, and ftruncate on named pipes. Fixes #1116 PiperOrigin-RevId: 282677425
2019-10-27Add /proc/sys/net/ipv4/ip_forwardaleksej
2019-10-23Merge pull request #641 from tanjianfeng:mastergVisor bot
PiperOrigin-RevId: 276380008
2019-10-16Reorder BUILD license and load functions in gvisor.Kevin Krakauer
PiperOrigin-RevId: 275139066
2019-10-15support /proc/net/routeJianfeng Tan
This proc file reports routing information to applications inside the container. Signed-off-by: Jianfeng Tan <henry.tjf@antfin.com> Change-Id: I498e47f8c4c185419befbb42d849d0b099ec71f3
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-11 18:58:33 +0000