| Age | Commit message (Collapse) | Author |
|---|
|
Replaces the WaitGroup with a RWMutex. Calls to Async hold the mutex for
reading, while AsyncBarrier takes the lock for writing. This ensures that all
executing Async work finishes before AsyncBarrier returns.
Also pushes the Async() call from Inode.Release into
gofer/InodeOperations.Release(). This removes a recursive Async call which
should not have been allowed in the first place. The gofer Release call is the
slow one (since it may make RPCs to the gofer), so putting the Async call there
makes sense.
PiperOrigin-RevId: 223093067
Change-Id: I116da7b20fce5ebab8d99c2ab0f27db7c89d890e
|
|
Previously this code used the tcpip error space. Since it is no longer part of
netstack, it can use the sentry's error space (except for a few cases where
there is still some shared code. This reduces the number of error space
conversions required for hot Unix socket operations.
PiperOrigin-RevId: 218541611
Change-Id: I3d13047006a8245b5dfda73364d37b8a453784bb
|
|
This change also adds extensive testing to the p9 package via mocks. The sanity
checks and type checks are moved from the gofer into the core package, where
they can be more easily validated.
PiperOrigin-RevId: 218296768
Change-Id: I4fc3c326e7bf1e0e140a454cbacbcc6fd617ab55
|
|
PiperOrigin-RevId: 217951017
Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
|
|
PiperOrigin-RevId: 217557656
Change-Id: I63d27635b1a6c12877279995d2d9847b6a19da9b
|
|
host.endpoint already has the check, but it is missing from
host.ConnectedEndpoint.
PiperOrigin-RevId: 214962762
Change-Id: I88bb13a5c5871775e4e7bf2608433df8a3d348e6
|
|
When revalidating a Dirent, if the inode id is the same, then we don't need to
throw away the entire Dirent. We can just update the unstable attributes in
place.
If the inode id has changed, then the remote file has been deleted or moved,
and we have no choice but to throw away the dirent we have a look up another.
In this case, we may still end up losing a mounted dirent that is a child of
the revalidated dirent. However, that seems appropriate here because the entire
mount point has been pulled out from underneath us.
Because gVisor's overlay is at the Inode level rather than the Dirent level, we
must pass the parent Inode and name along with the Inode that is being
revalidated.
PiperOrigin-RevId: 210431270
Change-Id: I705caef9c68900234972d5aac4ae3a78c61c7d42
|
|
PiperOrigin-RevId: 209817767
Change-Id: Iddf2b8441bc44f31f9a8cf6f2bd8e7a5b824b487
|
|
When an inode file state failed to load asynchronuously, we want to report
the error instead of potentially panicing in another async loading goroutine
incorrectly unblocked.
PiperOrigin-RevId: 209683977
Change-Id: I591cde97710bbe3cdc53717ee58f1d28bbda9261
|
|
Previously, gofer filesystems were configured with the default "fscache"
policy, which caches filesystem metadata and contents aggressively. While this
setting is best for performance, it means that changes from inside the sandbox
may not be immediately propagated outside the sandbox, and vice-versa.
This CL changes volumes and the root fs configuration to use a new
"remote-revalidate" cache policy which tries to retain as much caching as
possible while still making fs changes visible across the sandbox boundary.
This cache policy is enabled by default for the root filesystem. The default
value for the "--file-access" flag is still "proxy", but the behavior is
changed to use the new cache policy.
A new value for the "--file-access" flag is added, called "proxy-exclusive",
which turns on the previous aggressive caching behavior. As the name implies,
this flag should be used when the sandbox has "exclusive" access to the
filesystem.
All volume mounts are configured to use the new cache policy, since it is
safest and most likely to be correct. There is not currently a way to change
this behavior, but it's possible to add such a mechanism in the future. The
configurability is a smaller issue for volumes, since most of the expensive
application fs operations (walking + stating files) will likely served by the
root fs.
PiperOrigin-RevId: 208735037
Change-Id: Ife048fab1948205f6665df8563434dbc6ca8cfc9
|
|
Previously, an overlay would panic if either the upper or lower fs required
revalidation for a given Dirent. Now, we allow revalidation from the upper
file, but not the lower.
If a cached overlay inode does need revalidation (because the upper needs
revalidation), then the entire overlay Inode will be discarded and a new
overlay Inode will be built with a fresh copy of the upper file.
As a side effect of this change, Revalidate must take an Inode instead of a
Dirent, since an overlay needs to revalidate individual Inodes.
PiperOrigin-RevId: 208293638
Change-Id: Ic8f8d1ffdc09114721745661a09522b54420c5f1
|
|
The cache policy determines whether Lookup should return a negative dirent, or
just ENOENT. This CL fixes one spot where we returned a negative dirent without
first consulting the policy.
PiperOrigin-RevId: 208280230
Change-Id: I8f963bbdb45a95a74ad0ecc1eef47eff2092d3a4
|
|
Previously, processes which used file-system Unix Domain Sockets could not be
checkpoint-ed in runsc because the sockets were saved with their inode
numbers which do not necessarily remain the same upon restore. Now,
the sockets are also saved with their paths so that the new inodes
can be determined for the sockets based on these paths after restoring.
Tests for cases with UDS use are included. Test cleanup to come.
PiperOrigin-RevId: 208268781
Change-Id: Ieaa5d5d9a64914ca105cae199fd8492710b1d7ec
|
|
This CL adds a new cache-policy for gofer filesystems that uses the host page
cache, but causes dirents to be reloaded on each Walk, and does not cache
readdir results.
This policy is useful when the remote filesystem may change out from underneath
us, as any remote changes will be reflected on the next Walk.
Importantly, this cache policy is only consistent if we do not use gVisor's
internal page cache, since that page cache is tied to the Inode and may be
thrown away upon Revalidation.
This cache policy should only be used when the gofer supports donating host
FDs, since then gVisor will make use of the host kernel page cache, which will
be consistent for all open files in the gofer. In fact, a panic will be raised
if a file is opened without a donated FD.
PiperOrigin-RevId: 207752937
Change-Id: I233cb78b4695bbe00a4605ae64080a47629329b8
|
|
PiperOrigin-RevId: 207125440
Change-Id: I6c572afb4d693ee72a0c458a988b0e96d191cd49
|
|
PiperOrigin-RevId: 207037226
Change-Id: I8b5f1a056d4f3eab17846f2e0193bb737ecb5428
|
|
PiperOrigin-RevId: 207007153
Change-Id: Ifedf1cc3758dc18be16647a4ece9c840c1c636c9
|
|
We have been unnecessarily creating too many savable types implicitly.
PiperOrigin-RevId: 206334201
Change-Id: Idc5a3a14bfb7ee125c4f2bb2b1c53164e46f29a8
|
|
The current revalidation logic is very simple and does not do much
introspection of the dirent being revalidated (other than looking at the type
of file).
Fancier revalidation logic is coming soon, and we need to be able to look at
the cached and uncached attributes of a given dirent, and we need a context to
perform some of these operations.
PiperOrigin-RevId: 205307351
Change-Id: If17ea1c631d8f9489c0e05a263e23d7a8a3bf159
|
|
Dirent.FullName takes the global renameMu, but can be called during Create,
which itself takes dirent.mu and dirent.dirMu, which is a lock-order violation:
Dirent.Create
d.dirMu.Lock
d.mu.Lock
Inode.Create
gofer.inodeOperations.Create
gofer.NewFile
Dirent.FullName
d.renameMu.RLock
We only use the FullName here for logging, and in this case we can get by with
logging only the BaseName.
A `BaseName` method was added to Dirent, which simply returns the name, taking
d.parent.mu as required.
In the Create pathway, we can't call d.BaseName() because taking d.parent.mu
after d.mu violates the lock order. But we already know the base name of the
file we just created, so that's OK.
In the Open/GetFile pathway, we are free to call d.BaseName() because the other
dirent locks are not held.
PiperOrigin-RevId: 205112278
Change-Id: Ib45c734081aecc9b225249a65fa8093eb4995f10
|
|
PiperOrigin-RevId: 204508520
Change-Id: I09e5f8b6e69413370e1a0d39dbb7dc1ee0b6192d
|
|
Updated how restoring occurs through boot.go with a separate Restore function.
This prevents a new process and new mounts from being created.
Added tests to ensure the container is restored.
Registered checkpoint and restore commands so they can be used.
Docker support for these commands is still limited.
Working on #80.
PiperOrigin-RevId: 202710950
Change-Id: I2b893ceaef6b9442b1ce3743bd112383cb92af0c
|
|
PiperOrigin-RevId: 201738936
Change-Id: Ib75136415e28e8df0c742acd6b9512d4809fe3a8
|
|
The new policy is identical to FSCACHE (which caches everything in memory), but
it also flushes writes to the backing fs agent immediately.
All gofer cache policy decisions have been moved into the cachePolicy type.
Previously they were sprinkled around the codebase.
There are many different things that we cache (page cache, negative dirents,
dirent LRU, unstable attrs, readdir results....), and I don't think we should
have individual flags to control each of these. Instead, we should have a few
high-level cache policies that are consistent and useful to users. This
refactoring makes it easy to add more such policies.
PiperOrigin-RevId: 201206937
Change-Id: I6e225c382b2e5e1b0ad4ccf8ca229873f4cd389d
|
|
This is the first iteration of checkpoint that actually saves to a file.
Tests for checkpoint are included.
Ran into an issue when private unix sockets are enabled. An error message
was added for this case and the mutex state was set.
PiperOrigin-RevId: 200269470
Change-Id: I28d29a9f92c44bf73dc4a4b12ae0509ee4070e93
|
|
When doing a BidirectionalConnect we don't need to continue holding
the ConnectingEndpoint's mutex when creating the NewConnectedEndpoint
as it was held during the Connect. Additionally, we're not holding
the baseEndpoint mutex while Unregistering an event.
PiperOrigin-RevId: 196875557
Change-Id: Ied4ceed89de883121c6cba81bc62aa3a8549b1e9
|
|
When file is backed by host FD, atime and mtime for the host file and the
cached attributes in the Sentry must be close together. In this case,
the call to update atime and mtime can be skipped. This is important when
host filesystem is using overlay because updating atime and mtime explicitly
forces a copy up for every file that is touched.
PiperOrigin-RevId: 196176413
Change-Id: I3933ea91637a071ba2ea9db9d8ac7cdba5dc0482
|
|
PiperOrigin-RevId: 196157086
Change-Id: Ia7f7ffe1bf486b21ef8091e2e8ef9a9faf733dfc
|
|
PiperOrigin-RevId: 196051326
Change-Id: I4195b110e9a7d38d1ce1ed9c613971dea1be3bf0
|
|
Closes #28
PiperOrigin-RevId: 196041391
Change-Id: I5d79f1735b9d72744e8bebc6897002b27df9aa7a
|
|
PiperOrigin-RevId: 195850822
Change-Id: I4d7bdd8fe129c5ed461b73e1d7458be2cf5680c2
|
|
PiperOrigin-RevId: 194583126
Change-Id: Ica1d8821a90f74e7e745962d71801c598c652463
|
