| Age | Commit message (Collapse) | Author |
|---|
|
|
|
Fixes #1812. (The more direct cause of the deadlock is panic unsafety because
the historically high cost of defer means that we avoid it in hot paths,
including much of MM; defer is much cheaper as of Go 1.14, but still a
measurable overhead.)
PiperOrigin-RevId: 294560316
|
|
|
|
|
|
Note that these are only implemented for tmpfs, and other impls will still
return EOPNOTSUPP.
PiperOrigin-RevId: 293899385
|
|
|
|
|
|
Updates #1198
Opening host pipes (by spinning in fdpipe) and host sockets is not yet
complete, and will be done in a future CL.
Major differences from VFS1 gofer client (sentry/fs/gofer), with varying levels
of backportability:
- "Cache policies" are replaced by InteropMode, which control the behavior of
timestamps in addition to caching. Under InteropModeExclusive (analogous to
cacheAll) and InteropModeWritethrough (analogous to cacheAllWritethrough),
client timestamps are *not* written back to the server (it is not possible in
9P or Linux for clients to set ctime, so writing back client-authoritative
timestamps results in incoherence between atime/mtime and ctime). Under
InteropModeShared (analogous to cacheRemoteRevalidating), client timestamps
are not used at all (remote filesystem clocks are authoritative). cacheNone
is translated to InteropModeShared + new option
filesystemOptions.specialRegularFiles.
- Under InteropModeShared, "unstable attribute" reloading for permission
checks, lookup, and revalidation are fused, which is feasible in VFS2 since
gofer.filesystem controls path resolution. This results in a ~33% reduction
in RPCs for filesystem operations compared to cacheRemoteRevalidating. For
example, consider stat("/foo/bar/baz") where "/foo/bar/baz" fails
revalidation, resulting in the instantiation of a new dentry:
VFS1 RPCs:
getattr("/") // fs.MountNamespace.FindLink() => fs.Inode.CheckPermission() => gofer.inodeOperations.check() => gofer.inodeOperations.UnstableAttr()
walkgetattr("/", "foo") = fid1 // fs.Dirent.walk() => gofer.session.Revalidate() => gofer.cachePolicy.Revalidate()
clunk(fid1)
getattr("/foo") // CheckPermission
walkgetattr("/foo", "bar") = fid2 // Revalidate
clunk(fid2)
getattr("/foo/bar") // CheckPermission
walkgetattr("/foo/bar", "baz") = fid3 // Revalidate
clunk(fid3)
walkgetattr("/foo/bar", "baz") = fid4 // fs.Dirent.walk() => gofer.inodeOperations.Lookup
getattr("/foo/bar/baz") // linux.stat() => gofer.inodeOperations.UnstableAttr()
VFS2 RPCs:
getattr("/") // gofer.filesystem.walkExistingLocked()
walkgetattr("/", "foo") = fid1 // gofer.filesystem.stepExistingLocked()
clunk(fid1)
// No getattr: walkgetattr already updated metadata for permission check
walkgetattr("/foo", "bar") = fid2
clunk(fid2)
walkgetattr("/foo/bar", "baz") = fid3
// No clunk: fid3 used for new gofer.dentry
// No getattr: walkgetattr already updated metadata for stat()
- gofer.filesystem.unlinkAt() does not require instantiation of a dentry that
represents the file to be deleted. Updates #898.
- gofer.regularFileFD.OnClose() skips Tflushf for regular files under
InteropModeExclusive, as it's nonsensical to request a remote file flush
without flushing locally-buffered writes to that remote file first.
- Symlink targets are cached when InteropModeShared is not in effect.
- p9.QID.Path (which is already required to be unique for each file within a
server, and is accordingly already synthesized from device/inode numbers in
all known gofers) is used as-is for inode numbers, rather than being mapped
along with attr.RDev in the client to yet another synthetic inode number.
- Relevant parts of fsutil.CachingInodeOperations are inlined directly into
gofer package code. This avoids having to duplicate part of its functionality
in fsutil.HostMappable.
PiperOrigin-RevId: 293190213
|
|
|
|
Because the abi will depend on the core types for marshalling (usermem,
context, safemem, safecopy), these need to be flattened from the sentry
directory. These packages contain no sentry-specific details.
PiperOrigin-RevId: 291811289
|
|
PiperOrigin-RevId: 291745021
|
|
|
|
There was a very bare get/setxattr in the InodeOperations interface. Add
context.Context to both, size to getxattr, and flags to setxattr.
Note that extended attributes are passed around as strings in this
implementation, so size is automatically encoded into the value. Size is
added in getxattr so that implementations can return ERANGE if a value is larger
than can fit in the user-allocated buffer. This prevents us from unnecessarily
passing around an arbitrarily large xattr when the user buffer is actually too
small.
Don't use the existing xattrwalk and xattrcreate messages and define our
own, mainly for the sake of simplicity.
Extended attributes will be implemented in future commits.
PiperOrigin-RevId: 290121300
|
|
|
|
* Rename syncutil to sync.
* Add aliases to sync types.
* Replace existing usage of standard library sync package.
This will make it easier to swap out synchronization primitives. For example,
this will allow us to use primitives from github.com/sasha-s/go-deadlock to
check for lock ordering violations.
Updates #1472
PiperOrigin-RevId: 289033387
|
|
|
|
- Renamed memfs to tmpfs.
- Copied fileRangeSet bits from fs/fsutil/ to fsimpl/tmpfs/
- Changed tmpfs to be backed by filemem instead of byte slice.
- regularFileReadWriter uses a sync.Pool, similar to gofer client.
PiperOrigin-RevId: 288356380
|
|
PiperOrigin-RevId: 275139066
|
|
|
|
Linux kernel before 4.19 doesn't implement a feature that updates
open FD after a file is open for write (and is copied to the upper
layer). Already open FD will continue to read the old file content
until they are reopened. This is especially problematic for gVisor
because it caches open files.
Flag was added to force readonly files to be reopenned when the
same file is open for write. This is only needed if using kernels
prior to 4.19.
Closes #1006
It's difficult to really test this because we never run on tests
on older kernels. I'm adding a test in GKE which uses kernels
with the overlayfs problem for 1.14 and lower.
PiperOrigin-RevId: 275115289
|
|
|
|
The gofer's CachingInodeOperations implementation contains an optimization for
the common open-read-close pattern when we have a host FD. In this case, the
host kernel will update the timestamp for us to a reasonably close time, so we
don't need an extra RPC to the gofer.
However, when the app explicitly sets the timestamps (via futimes or similar)
then we actually DO need to update the timestamps, because the host kernel
won't do it for us.
To fix this, a new boolean `forceSetTimestamps` was added to
CachineInodeOperations.SetMaskedAttributes. It is only set by
gofer.InodeOperations.SetTimestamps.
PiperOrigin-RevId: 272048146
|
|
|
|
This also allows the tee(2) implementation to be enabled, since dup can now be
properly supported via WriteTo.
Note that this change necessitated some minor restructoring with the
fs.FileOperations splice methods. If the *fs.File is passed through directly,
then only public API methods are accessible, which will deadlock immediately
since the locking is already done by fs.Splice. Instead, we pass through an
abstract io.Reader or io.Writer, which elide locks and use the underlying
fs.FileOperations directly.
PiperOrigin-RevId: 268805207
|
|
They are no-ops, so the standard rule works fine.
PiperOrigin-RevId: 268776264
|
|
|
|
PiperOrigin-RevId: 266496644
|
|
|
|
PiperOrigin-RevId: 266177409
|
|
|
|
PiperOrigin-RevId: 260851452
|
|
|
|
Get/Set pipe size and ioctl support were missing from
overlayfs. It required moving the pipe.Sizer interface
to fs so that overlay could get access.
Fixes #318
PiperOrigin-RevId: 255511125
|
|
|
|
|
|
Currently, the overlay dirCache is only used for a single logical use of
getdents. i.e., it is discard when the FD is closed or seeked back to
the beginning.
But the initial work of getting the directory contents can be quite
expensive (particularly sorting large directories), so we should keep it
as long as possible.
This is very similar to the readdirCache in fs/gofer.
Since the upper filesystem does not have to allow caching readdir
entries, the new CacheReaddir MountSourceOperations method controls this
behavior.
This caching should be trivially movable to all Inodes if desired,
though that adds an additional copy step for non-overlay Inodes.
(Overlay Inodes already do the extra copy).
PiperOrigin-RevId: 255477592
|
|
All functions which allocate objects containing AtomicRefCounts will soon need
a context.
PiperOrigin-RevId: 253147709
|
|
|
|
This can be merged after:
https://github.com/google/gvisor-website/pull/77
or
https://github.com/google/gvisor-website/pull/78
PiperOrigin-RevId: 253132620
|
|
|
|
This does not actually implement an efficient splice or sendfile. Rather, it
adds a generic plumbing to the file internals so that this can be added. All
file implementations use the stub fileutil.NoSplice implementation, which
causes sendfile and splice to fall back to an internal copy.
A basic splice system call interface is added, along with a test.
PiperOrigin-RevId: 249335960
Change-Id: Ic5568be2af0a505c19e7aec66d5af2480ab0939b
|
|
* Creation of files, directories (and other fs objects) in a directory
should always update ctime.
* Same for removal.
* atime should not be updated on lookup, only readdir.
I've also renamed some misleading functions that update mtime and ctime.
PiperOrigin-RevId: 249115063
Change-Id: I30fa275fa7db96d01aa759ed64628c18bb3a7dc7
|
|
There is a lot of redundancy that we can simplify in the stat_times
test. This will make it easier to add new tests. However, the
simplification reveals that cached uattrs on goferfs don't properly
update ctime on rename.
PiperOrigin-RevId: 248773425
Change-Id: I52662728e1e9920981555881f9a85f9ce04041cf
|
|
Closes #225
PiperOrigin-RevId: 247508791
Change-Id: I04f47cf2770b30043e5a272aba4ba6e11d0476cc
|
|
This feature allows MemoryFile to delay eviction of "optional"
allocations, such as unused cached file pages.
Note that this incidentally makes CachingInodeOperations writeback
asynchronous, in the sense that it doesn't occur until eviction; this is
necessary because between when a cached page becomes evictable and when
it's evicted, file writes (via CachingInodeOperations.Write) may dirty
the page.
As currently implemented, this feature won't meaningfully impact
steady-state memory usage or caching; the reclaimer goroutine will
schedule eviction as soon as it runs out of other work to do. Future CLs
increase caching by adding constraints on when eviction is scheduled.
PiperOrigin-RevId: 246014822
Change-Id: Ia85feb25a2de92a48359eb84434b6ec6f9bea2cb
|
|
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes #209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
|
|
PiperOrigin-RevId: 245818639
Change-Id: I03703ef0fb9b6675955637b9fe2776204c545789
|
|
PiperOrigin-RevId: 243018347
Change-Id: I1e5b80607c1df0747482abea61db7fcf24536d37
|
|
RootFromContext can return a dirent with reference taken, or nil. We must call
DecRef if (and only if) a real dirent is returned.
PiperOrigin-RevId: 242965515
Change-Id: Ie2b7b4cb19ee09b6ccf788b71f3fd7efcdf35a11
|
|
This also applies these permissions to other static proc files.
Change-Id: I4167e585fed49ad271aa4e1f1260babb3239a73d
PiperOrigin-RevId: 242898575
|
