Age | Commit message (Collapse) | Author |
|
- Renamed memfs to tmpfs.
- Copied fileRangeSet bits from fs/fsutil/ to fsimpl/tmpfs/
- Changed tmpfs to be backed by filemem instead of byte slice.
- regularFileReadWriter uses a sync.Pool, similar to gofer client.
PiperOrigin-RevId: 288356380
|
|
PiperOrigin-RevId: 275139066
|
|
Linux kernel before 4.19 doesn't implement a feature that updates
open FD after a file is open for write (and is copied to the upper
layer). Already open FD will continue to read the old file content
until they are reopened. This is especially problematic for gVisor
because it caches open files.
Flag was added to force readonly files to be reopenned when the
same file is open for write. This is only needed if using kernels
prior to 4.19.
Closes #1006
It's difficult to really test this because we never run on tests
on older kernels. I'm adding a test in GKE which uses kernels
with the overlayfs problem for 1.14 and lower.
PiperOrigin-RevId: 275115289
|
|
The gofer's CachingInodeOperations implementation contains an optimization for
the common open-read-close pattern when we have a host FD. In this case, the
host kernel will update the timestamp for us to a reasonably close time, so we
don't need an extra RPC to the gofer.
However, when the app explicitly sets the timestamps (via futimes or similar)
then we actually DO need to update the timestamps, because the host kernel
won't do it for us.
To fix this, a new boolean `forceSetTimestamps` was added to
CachineInodeOperations.SetMaskedAttributes. It is only set by
gofer.InodeOperations.SetTimestamps.
PiperOrigin-RevId: 272048146
|
|
This also allows the tee(2) implementation to be enabled, since dup can now be
properly supported via WriteTo.
Note that this change necessitated some minor restructoring with the
fs.FileOperations splice methods. If the *fs.File is passed through directly,
then only public API methods are accessible, which will deadlock immediately
since the locking is already done by fs.Splice. Instead, we pass through an
abstract io.Reader or io.Writer, which elide locks and use the underlying
fs.FileOperations directly.
PiperOrigin-RevId: 268805207
|
|
They are no-ops, so the standard rule works fine.
PiperOrigin-RevId: 268776264
|
|
PiperOrigin-RevId: 266496644
|
|
PiperOrigin-RevId: 266177409
|
|
PiperOrigin-RevId: 260851452
|
|
Get/Set pipe size and ioctl support were missing from
overlayfs. It required moving the pipe.Sizer interface
to fs so that overlay could get access.
Fixes #318
PiperOrigin-RevId: 255511125
|
|
Currently, the overlay dirCache is only used for a single logical use of
getdents. i.e., it is discard when the FD is closed or seeked back to
the beginning.
But the initial work of getting the directory contents can be quite
expensive (particularly sorting large directories), so we should keep it
as long as possible.
This is very similar to the readdirCache in fs/gofer.
Since the upper filesystem does not have to allow caching readdir
entries, the new CacheReaddir MountSourceOperations method controls this
behavior.
This caching should be trivially movable to all Inodes if desired,
though that adds an additional copy step for non-overlay Inodes.
(Overlay Inodes already do the extra copy).
PiperOrigin-RevId: 255477592
|
|
All functions which allocate objects containing AtomicRefCounts will soon need
a context.
PiperOrigin-RevId: 253147709
|
|
This can be merged after:
https://github.com/google/gvisor-website/pull/77
or
https://github.com/google/gvisor-website/pull/78
PiperOrigin-RevId: 253132620
|
|
This does not actually implement an efficient splice or sendfile. Rather, it
adds a generic plumbing to the file internals so that this can be added. All
file implementations use the stub fileutil.NoSplice implementation, which
causes sendfile and splice to fall back to an internal copy.
A basic splice system call interface is added, along with a test.
PiperOrigin-RevId: 249335960
Change-Id: Ic5568be2af0a505c19e7aec66d5af2480ab0939b
|
|
* Creation of files, directories (and other fs objects) in a directory
should always update ctime.
* Same for removal.
* atime should not be updated on lookup, only readdir.
I've also renamed some misleading functions that update mtime and ctime.
PiperOrigin-RevId: 249115063
Change-Id: I30fa275fa7db96d01aa759ed64628c18bb3a7dc7
|
|
There is a lot of redundancy that we can simplify in the stat_times
test. This will make it easier to add new tests. However, the
simplification reveals that cached uattrs on goferfs don't properly
update ctime on rename.
PiperOrigin-RevId: 248773425
Change-Id: I52662728e1e9920981555881f9a85f9ce04041cf
|
|
Closes #225
PiperOrigin-RevId: 247508791
Change-Id: I04f47cf2770b30043e5a272aba4ba6e11d0476cc
|
|
This feature allows MemoryFile to delay eviction of "optional"
allocations, such as unused cached file pages.
Note that this incidentally makes CachingInodeOperations writeback
asynchronous, in the sense that it doesn't occur until eviction; this is
necessary because between when a cached page becomes evictable and when
it's evicted, file writes (via CachingInodeOperations.Write) may dirty
the page.
As currently implemented, this feature won't meaningfully impact
steady-state memory usage or caching; the reclaimer goroutine will
schedule eviction as soon as it runs out of other work to do. Future CLs
increase caching by adding constraints on when eviction is scheduled.
PiperOrigin-RevId: 246014822
Change-Id: Ia85feb25a2de92a48359eb84434b6ec6f9bea2cb
|
|
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes #209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
|
|
PiperOrigin-RevId: 245818639
Change-Id: I03703ef0fb9b6675955637b9fe2776204c545789
|
|
PiperOrigin-RevId: 243018347
Change-Id: I1e5b80607c1df0747482abea61db7fcf24536d37
|
|
RootFromContext can return a dirent with reference taken, or nil. We must call
DecRef if (and only if) a real dirent is returned.
PiperOrigin-RevId: 242965515
Change-Id: Ie2b7b4cb19ee09b6ccf788b71f3fd7efcdf35a11
|
|
This also applies these permissions to other static proc files.
Change-Id: I4167e585fed49ad271aa4e1f1260babb3239a73d
PiperOrigin-RevId: 242898575
|
|
Strings are a better fit for this usage because they are immutable in Go, and
can contain arbitrary bytes. It also allows us to avoid casting bytes to string
(and the associated allocation) in the hot path when checking for overlay
whiteouts.
PiperOrigin-RevId: 242208856
Change-Id: I7699ae6302492eca71787dd0b72e0a5a217a3db2
|
|
- Document fsutil.CachedFileObject.FD() requirements on access
permissions, and change gofer.inodeFileState.FD() to honor them.
Fixes #147.
- Combine gofer.inodeFileState.readonly and
gofer.inodeFileState.readthrough, and simplify handle caching logic.
- Inline gofer.cachePolicy.cacheHandles into
gofer.inodeFileState.setSharedHandles, because users with access to
gofer.inodeFileState don't necessarily have access to the fs.Inode
(predictably, this is a save/restore problem).
Before this CL:
$ docker run --runtime=runsc-d -v $(pwd)/gvisor/repro:/root/repro -it ubuntu bash
root@34d51017ed67:/# /root/repro/runsc-b147
mmap: 0x7f3c01e45000
Segmentation fault
After this CL:
$ docker run --runtime=runsc-d -v $(pwd)/gvisor/repro:/root/repro -it ubuntu bash
root@d3c3cb56bbf9:/# /root/repro/runsc-b147
mmap: 0x7f78987ec000
o
PiperOrigin-RevId: 240818413
Change-Id: I49e1d4a81a0cb9177832b0a9f31a10da722a896b
|
|
MM.insertPMAsLocked() passes vma.maxPerms to memmap.Mappable.Translate
(although it unsets AccessType.Write if the vma is private). This
somewhat simplifies handling of pmas, since it means only COW-break
needs to replace existing pmas. However, it also means that a MAP_SHARED
mapping of a file opened O_RDWR dirties the file, regardless of the
mapping's permissions and whether or not the mapping is ever actually
written to with I/O that ignores permissions (e.g.
ptrace(PTRACE_POKEDATA)).
To fix this:
- Change the pma-getting path to request only the permissions that are
required for the calling access.
- Change memmap.Mappable.Translate to take requested permissions, and
return allowed permissions. This preserves the existing behavior in the
common cases where the memmap.Mappable isn't
fsutil.CachingInodeOperations and doesn't care if the translated
platform.File pages are written to.
- Change the MM.getPMAsLocked path to support permission upgrading of
pmas outside of copy-on-write.
PiperOrigin-RevId: 240196979
Change-Id: Ie0147c62c1fbc409467a6fa16269a413f3d7d571
|
|
In the case of a rename replacing an existing destination inode, ramfs
Rename failed to first remove the replaced inode. This caused:
1. A leak of a reference to the inode (making it live indefinitely).
2. For directories, a leak of the replaced directory's .. link to the
parent. This would cause the parent's link count to incorrectly
increase.
(2) is much simpler to test than (1), so that's what I've done.
agentfs has a similar bug with link count only, so the Dirent layer
informs the Inode if this is a replacing rename.
Fixes #133
PiperOrigin-RevId: 239105698
Change-Id: I4450af2462d8ae3339def812287213d2cbeebde0
|
|
This is in preparation for improved page cache reclaim, which requires
greater integration between the page cache and page allocator.
PiperOrigin-RevId: 238444706
Change-Id: Id24141b3678d96c7d7dc24baddd9be555bffafe4
|
|
- Redefine some memmap.Mappable, platform.File, and platform.Memory
semantics in terms of File reference counts (no functional change).
- Make AddressSpace.MapFile take a platform.File instead of a raw FD,
and replace platform.File.MapInto with platform.File.FD. This allows
kvm.AddressSpace.MapFile to always use platform.File.MapInternal instead
of maintaining its own (redundant) cache of file mappings in the sentry
address space.
PiperOrigin-RevId: 238044504
Change-Id: Ib73a11e4275c0da0126d0194aa6c6017a9cef64f
|
|
fsutil.SyncDirtyAll mutates the DirtySet.
PiperOrigin-RevId: 236183349
Change-Id: I7e809d5b406ac843407e61eff17d81259a819b4f
|
|
Dirty should be set only when the attribute is changed in the cache
only. Instances where the change was also sent to the backing file
doesn't need to dirty the attribute.
Also remove size update during WriteOut as writing dirty page would
naturaly grow the file if needed.
RELNOTES: relnotes is needed for the parent CL.
PiperOrigin-RevId: 232068978
Change-Id: I00ba54693a2c7adc06efa9e030faf8f2e8e7f188
|
|
This changed required making fsutil.HostMappable use
a backing file to ensure the correct FD would be used
for read/write operations.
RELNOTES: relnotes is needed for the parent CL.
PiperOrigin-RevId: 231836164
Change-Id: I8ae9639715529874ea7d80a65e2c711a5b4ce254
|
|
Nothing reads them and they can simply get stale.
Generated with:
$ sed -i "s/licenses(\(.*\)).*/licenses(\1)/" **/BUILD
PiperOrigin-RevId: 231818945
Change-Id: Ibc3f9838546b7e94f13f217060d31f4ada9d4bf0
|
|
We were modifying InodeSimpleAttributes.Unstable.AccessTime without holding
the necessary lock. Luckily for us, InodeSimpleAttributes already has a
NotifyAccess method that will do the update while holding the lock.
In addition, we were holding dfo.dir.mu.Lock while setting AccessTime, which
is unnecessary, so that lock has been removed.
PiperOrigin-RevId: 231278447
Change-Id: I81ed6d3dbc0b18e3f90c1df5e5a9c06132761769
|
|
When file size changes outside the sandbox, page cache was not
refreshing file size which is required for cacheRemoteRevalidating.
In fact, cacheRemoteRevalidating should be skipping the cache
completely since it's not really benefiting from it. The cache is
cache is already bypassed for unstable attributes (see
cachePolicy.cacheUAttrs). And althought the cache is called to
map pages, they will always miss the cache and map directly from
the host.
Created a HostMappable struct that maps directly to the host and
use it for files with cacheRemoteRevalidating.
Closes #124
PiperOrigin-RevId: 230998440
Change-Id: Ic5f632eabe33b47241e05e98c95e9b2090ae08fc
|
|
PiperOrigin-RevId: 229781337
Change-Id: I1f946cff2771714fb1abd83a83ed454e9febda0a
|
|
More helper structs have been added to the fsutil package to make it easier to
implement fs.InodeOperations and fs.FileOperations.
PiperOrigin-RevId: 229305982
Change-Id: Ib6f8d3862f4216745116857913dbfa351530223b
|
|
This is necessary to implement file seals for memfds.
PiperOrigin-RevId: 225239394
Change-Id: Ib3f1ab31385afc4b24e96cd81a05ef1bebbcbb70
|
|
PiperOrigin-RevId: 217951017
Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
|
|
PiperOrigin-RevId: 217557656
Change-Id: I63d27635b1a6c12877279995d2d9847b6a19da9b
|
|
When revalidating a Dirent, if the inode id is the same, then we don't need to
throw away the entire Dirent. We can just update the unstable attributes in
place.
If the inode id has changed, then the remote file has been deleted or moved,
and we have no choice but to throw away the dirent we have a look up another.
In this case, we may still end up losing a mounted dirent that is a child of
the revalidated dirent. However, that seems appropriate here because the entire
mount point has been pulled out from underneath us.
Because gVisor's overlay is at the Inode level rather than the Dirent level, we
must pass the parent Inode and name along with the Inode that is being
revalidated.
PiperOrigin-RevId: 210431270
Change-Id: I705caef9c68900234972d5aac4ae3a78c61c7d42
|
|
PiperOrigin-RevId: 210405166
Change-Id: I252766015885c418e914007baf2fc058fec39b3e
|
|
Previously, processes which used file-system Unix Domain Sockets could not be
checkpoint-ed in runsc because the sockets were saved with their inode
numbers which do not necessarily remain the same upon restore. Now,
the sockets are also saved with their paths so that the new inodes
can be determined for the sockets based on these paths after restoring.
Tests for cases with UDS use are included. Test cleanup to come.
PiperOrigin-RevId: 208268781
Change-Id: Ieaa5d5d9a64914ca105cae199fd8492710b1d7ec
|
|
PiperOrigin-RevId: 207125440
Change-Id: I6c572afb4d693ee72a0c458a988b0e96d191cd49
|
|
PiperOrigin-RevId: 207037226
Change-Id: I8b5f1a056d4f3eab17846f2e0193bb737ecb5428
|
|
PiperOrigin-RevId: 207007153
Change-Id: Ifedf1cc3758dc18be16647a4ece9c840c1c636c9
|
|
We have been unnecessarily creating too many savable types implicitly.
PiperOrigin-RevId: 206334201
Change-Id: Idc5a3a14bfb7ee125c4f2bb2b1c53164e46f29a8
|
|
This method allows an eventfd inside the Sentry to be registered with with
the host kernel.
Update comment about memory mapping host fds via CachingInodeOperations.
PiperOrigin-RevId: 204784859
Change-Id: I55823321e2d84c17ae0f7efaabc6b55b852ae257
|
|
PiperOrigin-RevId: 201401727
Change-Id: Ia5589882ba58a00efb522ab372e206b7e8e62aee
|
|
PiperOrigin-RevId: 195307689
Change-Id: I499f19af49875a43214797d63376f20ae788d2f4
|