Age | Commit message (Collapse) | Author |
|
We do not support RWF_SYNC/RWF_DSYNC and probably shouldn't silently accept
them, since the user may incorrectly believe that we are synchronizing I/O.
Remove the pwritev2 test verifying that we support these flags.
gvisor.dev/issue/2601 is the tracking bug for deciding which RWF_.* flags
we need and supporting them.
Updates #2923, #2601.
PiperOrigin-RevId: 319351286
|
|
Updates #1035
PiperOrigin-RevId: 303021328
|
|
- When setting up the virtual filesystem, mount a host.filesystem to contain
all files that need to be imported.
- Make read/preadv syscalls to the host in cases where preadv2 may not be
supported yet (likewise for writing).
- Make save/restore functions in kernel/kernel.go return early if vfs2 is
enabled.
PiperOrigin-RevId: 300922353
|
|
pipe and pipe2 aren't ported, pending a slight rework of pipe FDs for VFS2.
mount and umount2 aren't ported out of temporary laziness. access and faccessat
need additional FSImpl methods to implement properly, but are stubbed to
prevent googletest from CHECK-failing. Other syscalls require additional
plumbing.
Updates #1623
PiperOrigin-RevId: 297188448
|
|
PiperOrigin-RevId: 290840484
|
|
PiperOrigin-RevId: 290822487
|
|
Some of the flags in the file system related system call
are architecture specific(O_NOFOLLOW/O_DIRECT..). Ref to
the fcntl.h file in the Linux src codes.
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I354d988073bfd0c9ff5371d4e0be9da2b8fd019f
|
|
PiperOrigin-RevId: 285231002
|
|
PiperOrigin-RevId: 284892289
|
|
In glibc, some structures are defined differently on different
platforms.
Such as: C.struct_stat
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
In Linux (include/linux/types.h), mode_t is an unsigned short.
PiperOrigin-RevId: 272956350
|
|
Document limitation of no reasonable implementation for RWF_HIPRI
flag (High Priority Read/Write for block-based file systems).
PiperOrigin-RevId: 264237589
|
|
PiperOrigin-RevId: 259376740
|
|
Major differences from the current ("v1") sentry VFS:
- Path resolution is Filesystem-driven (FilesystemImpl methods call
vfs.ResolvingPath methods) rather than VFS-driven (fs package owns a
Dirent tree and calls fs.InodeOperations methods to populate it). This
drastically improves performance, primarily by reducing overhead from
inefficient synchronization and indirection. It also makes it possible
to implement remote filesystem protocols that translate FS system calls
into single RPCs, rather than having to make (at least) one RPC per path
component, significantly reducing the latency of remote filesystems
(especially during cold starts and for uncacheable shared filesystems).
- Mounts are correctly represented as a separate check based on
contextual state (current mount) rather than direct replacement in a
fs.Dirent tree. This makes it possible to support (non-recursive) bind
mounts and mount namespaces.
Included in this CL is fsimpl/memfs, an incomplete in-memory filesystem
that exists primarily to demonstrate intended filesystem implementation
patterns and for benchmarking:
BenchmarkVFS1TmpfsStat/1-6 3000000 497 ns/op
BenchmarkVFS1TmpfsStat/2-6 2000000 676 ns/op
BenchmarkVFS1TmpfsStat/3-6 2000000 904 ns/op
BenchmarkVFS1TmpfsStat/8-6 1000000 1944 ns/op
BenchmarkVFS1TmpfsStat/64-6 100000 14067 ns/op
BenchmarkVFS1TmpfsStat/100-6 50000 21700 ns/op
BenchmarkVFS2MemfsStat/1-6 10000000 197 ns/op
BenchmarkVFS2MemfsStat/2-6 5000000 233 ns/op
BenchmarkVFS2MemfsStat/3-6 5000000 268 ns/op
BenchmarkVFS2MemfsStat/8-6 3000000 477 ns/op
BenchmarkVFS2MemfsStat/64-6 500000 2592 ns/op
BenchmarkVFS2MemfsStat/100-6 300000 4045 ns/op
BenchmarkVFS1TmpfsMountStat/1-6 2000000 679 ns/op
BenchmarkVFS1TmpfsMountStat/2-6 2000000 912 ns/op
BenchmarkVFS1TmpfsMountStat/3-6 1000000 1113 ns/op
BenchmarkVFS1TmpfsMountStat/8-6 1000000 2118 ns/op
BenchmarkVFS1TmpfsMountStat/64-6 100000 14251 ns/op
BenchmarkVFS1TmpfsMountStat/100-6 100000 22397 ns/op
BenchmarkVFS2MemfsMountStat/1-6 5000000 317 ns/op
BenchmarkVFS2MemfsMountStat/2-6 5000000 361 ns/op
BenchmarkVFS2MemfsMountStat/3-6 5000000 387 ns/op
BenchmarkVFS2MemfsMountStat/8-6 3000000 582 ns/op
BenchmarkVFS2MemfsMountStat/64-6 500000 2699 ns/op
BenchmarkVFS2MemfsMountStat/100-6 300000 4133 ns/op
From this we can infer that, on this machine:
- Constant cost for tmpfs stat() is ~160ns in VFS2 and ~280ns in VFS1.
- Per-path-component cost is ~35ns in VFS2 and ~215ns in VFS1, a
difference of about 6x.
- The cost of crossing a mount boundary is about 80ns in VFS2
(MemfsMountStat/1 does approximately the same amount of work as
MemfsStat/2, except that it also crosses a mount boundary). This is an
inescapable cost of the separate mount lookup needed to support bind
mounts and mount namespaces.
PiperOrigin-RevId: 258853946
|
|
PiperOrigin-RevId: 258657913
|
|
PiperOrigin-RevId: 257293198
|
|
We don't have the plumbing for btime yet, so that field is left off. The
returned mask indicates that btime is absent.
Fixes #343
PiperOrigin-RevId: 254575752
|
|
This can be merged after:
https://github.com/google/gvisor-website/pull/77
or
https://github.com/google/gvisor-website/pull/78
PiperOrigin-RevId: 253132620
|
|
Closes #225
PiperOrigin-RevId: 247508791
Change-Id: I04f47cf2770b30043e5a272aba4ba6e11d0476cc
|
|
Based on the guidelines at
https://opensource.google.com/docs/releasing/authors/.
1. $ rg -l "Google LLC" | xargs sed -i 's/Google LLC.*/The gVisor Authors./'
2. Manual fixup of "Google Inc" references.
3. Add AUTHORS file. Authors may request to be added to this file.
4. Point netstack AUTHORS to gVisor AUTHORS. Drop CONTRIBUTORS.
Fixes #209
PiperOrigin-RevId: 245823212
Change-Id: I64530b24ad021a7d683137459cafc510f5ee1de9
|
|
Memfds are simply anonymous tmpfs files with no associated
mounts. Also implementing file seals, which Linux only implements for
memfds at the moment.
PiperOrigin-RevId: 240450031
Change-Id: I31de78b950101ae8d7a13d0e93fe52d98ea06f2f
|
|
CopyObjectOut grows its destination byte slice incrementally, causing
many small slice allocations on the heap. This leads to increased GC and
noticeably slower stat calls.
PiperOrigin-RevId: 233140904
Change-Id: Ieb90295dd8dd45b3e56506fef9d7f86c92e97d97
|
|
Implement pwritev2 and associated unit tests.
Clean up preadv2 unit tests.
Tag RWF_ flags in both preadv2 and pwritev2 with associated bug tickets.
PiperOrigin-RevId: 226222119
Change-Id: Ieb22672418812894ba114bbc88e67f1dd50de620
|
|
Unlike FlagSet, order doesn't matter here, so it can simply be a map.
PiperOrigin-RevId: 224377910
Change-Id: I15810c698a7f02d8614bf09b59583ab73cba0514
|
|
Implement RWF_HIPRI (4.6) silently passes the read call.
Implement -1 offset calls readv.
PiperOrigin-RevId: 222840324
Change-Id: If9ddc1e8d086e1a632bdf5e00bae08205f95b6b0
|
|
PiperOrigin-RevId: 217951017
Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
|
|
PiperOrigin-RevId: 211644897
Change-Id: I882ed827a477d6c03576463ca5bf2d6351892b90
|
|
Cleanup some more syscall.O_* references while we're here.
PiperOrigin-RevId: 208133460
Change-Id: I48db71a38f817e4f4673977eafcc0e3874eb9a25
|
|
This flag will always be true for gVisor files.
PiperOrigin-RevId: 206355963
Change-Id: I2f03d2412e2609042df43b06d1318cba674574d0
|
|
PiperOrigin-RevId: 194583126
Change-Id: Ica1d8821a90f74e7e745962d71801c598c652463
|