| Age | Commit message (Collapse) | Author |
|---|
|
Using the newer bazel rules necessitates a transition from proto1 to
proto2. In order to resolve the incompatibility between proto2 and
gogoproto, the cri runtimeoptions proto must be vendored.
Further, some of the semantics of bazel caching changed during the
transition. It is now necessary to:
- Ensure that :gopath depends only on pure library targets, as the
propagation of go_binary build attributes (pure, static) will
affected the generated files (though content remains the same,
there are conflicts with respect to the gopath).
- Update bazel.mk to include the possibility of binaries in the
bazel-out directory, as it will now put runsc and others there.
This required some refinements to the mechanism of extracting
paths, since some the existing regex resulted in false positives.
- Change nogo rules to prevent escape generation on binary targets.
For some reason, the newer version of bazel attempted to run the
nogo analysis on the binary targets, which fails due to the fact
that objdump does not work on the final binary. This must be due
to a change in the semantics of aspects in bazel3.
PiperOrigin-RevId: 337958324
|
|
This change also adds support to go_stateify for detecting an appropriate
receiver name, avoiding a large number of false positives.
PiperOrigin-RevId: 335994587
|
|
This change implements the Neighbor Unreachability Detection (NUD) state
machine, as per RFC 4861 [1]. The state machine operates on a single neighbor
in the local network. This requires the state machine to be implemented on each
entry of the neighbor table.
This change also adds, but does not expose, several APIs. The first API is for
performing basic operations on the neighbor table:
- Create a static entry
- List all entries
- Delete all entries
- Remove an entry by address
The second API is used for changing the NUD protocol constants on a per-NIC
basis to allow Neighbor Discovery to operate over links with widely varying
performance characteristics. See [RFC 4861 Section 10][2] for the list of
constants.
Finally, the last API is for allowing users to subscribe to NUD state changes.
See [RFC 4861 Appendix C][3] for the list of edges.
[1]: https://tools.ietf.org/html/rfc4861
[2]: https://tools.ietf.org/html/rfc4861#section-10
[3]: https://tools.ietf.org/html/rfc4861#appendix-C
Tests:
pkg/tcpip/stack:stack_test
- TestNeighborCacheAddStaticEntryThenOverflow
- TestNeighborCacheClear
- TestNeighborCacheClearThenOverflow
- TestNeighborCacheConcurrent
- TestNeighborCacheDuplicateStaticEntryWithDifferentLinkAddress
- TestNeighborCacheDuplicateStaticEntryWithSameLinkAddress
- TestNeighborCacheEntry
- TestNeighborCacheEntryNoLinkAddress
- TestNeighborCacheGetConfig
- TestNeighborCacheKeepFrequentlyUsed
- TestNeighborCacheNotifiesWaker
- TestNeighborCacheOverflow
- TestNeighborCacheOverwriteWithStaticEntryThenOverflow
- TestNeighborCacheRemoveEntry
- TestNeighborCacheRemoveEntryThenOverflow
- TestNeighborCacheRemoveStaticEntry
- TestNeighborCacheRemoveStaticEntryThenOverflow
- TestNeighborCacheRemoveWaker
- TestNeighborCacheReplace
- TestNeighborCacheResolutionFailed
- TestNeighborCacheResolutionTimeout
- TestNeighborCacheSetConfig
- TestNeighborCacheStaticResolution
- TestEntryAddsAndClearsWakers
- TestEntryDelayToProbe
- TestEntryDelayToReachableWhenSolicitedOverrideConfirmation
- TestEntryDelayToReachableWhenUpperLevelConfirmation
- TestEntryDelayToStaleWhenConfirmationWithDifferentAddress
- TestEntryDelayToStaleWhenProbeWithDifferentAddress
- TestEntryFailedGetsDeleted
- TestEntryIncompleteToFailed
- TestEntryIncompleteToIncompleteDoesNotChangeUpdatedAt
- TestEntryIncompleteToReachable
- TestEntryIncompleteToReachableWithRouterFlag
- TestEntryIncompleteToStale
- TestEntryInitiallyUnknown
- TestEntryProbeToFailed
- TestEntryProbeToReachableWhenSolicitedConfirmationWithSameAddress
- TestEntryProbeToReachableWhenSolicitedOverrideConfirmation
- TestEntryProbeToStaleWhenConfirmationWithDifferentAddress
- TestEntryProbeToStaleWhenProbeWithDifferentAddress
- TestEntryReachableToStaleWhenConfirmationWithDifferentAddress
- TestEntryReachableToStaleWhenConfirmationWithDifferentAddressAndOverride
- TestEntryReachableToStaleWhenProbeWithDifferentAddress
- TestEntryReachableToStaleWhenTimeout
- TestEntryStaleToDelay
- TestEntryStaleToReachableWhenSolicitedOverrideConfirmation
- TestEntryStaleToStaleWhenOverrideConfirmation
- TestEntryStaleToStaleWhenProbeUpdateAddress
- TestEntryStaysDelayWhenOverrideConfirmationWithSameAddress
- TestEntryStaysProbeWhenOverrideConfirmationWithSameAddress
- TestEntryStaysReachableWhenConfirmationWithRouterFlag
- TestEntryStaysReachableWhenProbeWithSameAddress
- TestEntryStaysStaleWhenProbeWithSameAddress
- TestEntryUnknownToIncomplete
- TestEntryUnknownToStale
- TestEntryUnknownToUnknownWhenConfirmationWithUnknownAddress
pkg/tcpip/stack:stack_x_test
- TestDefaultNUDConfigurations
- TestNUDConfigurationFailsForNotSupported
- TestNUDConfigurationsBaseReachableTime
- TestNUDConfigurationsDelayFirstProbeTime
- TestNUDConfigurationsMaxMulticastProbes
- TestNUDConfigurationsMaxRandomFactor
- TestNUDConfigurationsMaxUnicastProbes
- TestNUDConfigurationsMinRandomFactor
- TestNUDConfigurationsRetransmitTimer
- TestNUDConfigurationsUnreachableTime
- TestNUDStateReachableTime
- TestNUDStateRecomputeReachableTime
- TestSetNUDConfigurationFailsForBadNICID
- TestSetNUDConfigurationFailsForNotSupported
[1]: https://tools.ietf.org/html/rfc4861
[2]: https://tools.ietf.org/html/rfc4861#section-10
[3]: https://tools.ietf.org/html/rfc4861#appendix-C
Updates #1889
Updates #1894
Updates #1895
Updates #1947
Updates #1948
Updates #1949
Updates #1950
PiperOrigin-RevId: 324070795
|
|
PiperOrigin-RevId: 321053634
|
|
The go.mod dependency tree for the shim was somehow contradictory. After
resolving these issues (e.g. explicitly imported k8s 1.14, pulling a
specific dbus version), and adding all dependencies, the shim can now be
build as part of the regular bazel tree.
As part of this process, minor cleanup was done in all the source files:
headers were standardized (and include "The gVisor Authors" in addition
to the "The containerd Authors" if originally derived from containerd
sources), and comments were cleaned up to meet coding standards.
This change makes the containerd installation dynamic, so that multiple
versions can be tested, and drops the static installer for the VM image
itself.
This change also updates test/root/crictl_test.go and related utilities,
so that the containerd tests can be run on any version (and in cases
where it applies, they can be run on both v1 and v2 as parameterized
tests).
|
|
It was downgraded by mistake in
e5d9a4010bdb ("Add ability to execute go.mod in gopath context.")
Signed-off-by: Andrei Vagin <avagin@gmail.com>
|
|
These dependencies do not need to be in our go.mod or go.sum files.
PiperOrigin-RevId: 297942163
|
|
PiperOrigin-RevId: 297915917
|
|
|
|
For everyone's joy, this is a tool that reopens issues that
have been closed, but are still referenced by TODOs in the
code. The idea is to run it in Kokoro nightly. Kokoro changes
are coming up next.
PiperOrigin-RevId: 288789560
|
|
Bitshift operators with signed int is supported in Go 1.13.
PiperOrigin-RevId: 285853622
|
|
This can be merged after:
https://github.com/google/gvisor-website/pull/77
or
https://github.com/google/gvisor-website/pull/78
PiperOrigin-RevId: 253132620
|
|
Adds simple introspection for syscall compatibility information to Linux/AMD64.
Syscalls registered in the syscall table now have associated metadata like
name, support level, notes, and URLs to relevant issues.
Syscall information can be exported as a table, JSON, or CSV using the new
'runsc help syscalls' command. Users can use this info to debug and get info
on the compatibility of the version of runsc they are running or to generate
documentation.
PiperOrigin-RevId: 252558304
|
|
PiperOrigin-RevId: 251377523
|
|
The WORKSPACE go_repositories can be generated from a standard go.mod file. Add
the necessary gazelle hooks to do so, and include a test that sanity checks
there are no changes. This go.mod file will be used in a subsequent commit to
generate a go gettable branch of the repository.
This commit also adds a tools/go_branch.sh script, which given an existing go
branch in the repository, will add an additional synthetic change to the branch
bringing it up-to-date with HEAD.
As a final step, a cloudbuild script is included, which can be used to automate
the process for every change pushed to the repository. This may be used after
an initial go branch is pushed, but this is manual process.
PiperOrigin-RevId: 251095016
|
