summaryrefslogtreecommitdiffhomepage
path: root/Makefile
AgeCommit message (Collapse)Author
2021-04-16[op] Split nogo target out of unit tests.Ayush Ranjan
Building nogo targets takes a very long time. This change extracts it into its own BuildKite job. This change also additionally speeds up other targets that were using the bazel flag --test_tag_filters. Without --build_tag_filters, the filter is not applied while building the specified targets and so we might end up building targets that are not actually tested. PiperOrigin-RevId: 368918211
2021-04-02Implement cgroupfs.Rahat Mahmood
A skeleton implementation of cgroupfs. It supports trivial cpu and memory controllers with no support for hierarchies. PiperOrigin-RevId: 366561126
2021-04-02Add vfs1 to go/runsc-benchmarksZach Koopmans
PiperOrigin-RevId: 366470480
2021-03-13[perf] Run benchmarks with VFS2.Ayush Ranjan
The run-benchmark target would run the benchmark with VFS1. PiperOrigin-RevId: 362754188
2021-03-11fusefs: Implement default_permissions and allow_other mount options.Rahat Mahmood
By default, fusefs defers node permission checks to the server. The default_permissions mount option enables the usual unix permission checks based on the node owner and mode bits. Previously fusefs was incorrectly checking permissions unconditionally. Additionally, fusefs should restrict filesystem access to processes started by the mount owner to prevent the fuse daemon from gaining priviledge over other processes. The allow_other mount option overrides this behaviour. Previously fusefs was incorrectly skipping this check. Updates #3229 PiperOrigin-RevId: 362419092
2021-02-02Drop gazelle target from the Makefile.Adin Scannell
This is replaced with a straight call to bazel. Unfortunately, the built gazelle target requires a bazel installation to run anyways. PiperOrigin-RevId: 355211990
2021-02-01[infra] Fix gazelle target.Ayush Ranjan
PiperOrigin-RevId: 354991724
2021-01-15Add fsstress testsFabricio Voznika
Updates #5273 PiperOrigin-RevId: 352088736
2021-01-14Don't run profiles on runc.Zach Koopmans
PiperOrigin-RevId: 351906812
2021-01-13Split container tests from unit tests.Adin Scannell
PiperOrigin-RevId: 351632484
2021-01-12Don't remove release directory.Adin Scannell
If the release directory is a parent directory (for reasons), then this causes a few problems (to say the least). PiperOrigin-RevId: 351515882
2021-01-12Delete shim v1Fabricio Voznika
gvisor-containerd-shim is not compatible with containerd 1.1 or earlier. Starting from containerd 1.2, shim v2 is the preferred interface. PiperOrigin-RevId: 351485556
2021-01-11Fix Go branch for arm64.Adin Scannell
This requires several changes: * Templates must preserve relevant tags. * Pagetables templates are split into two targets, each preserving tags. * The binary VDSO is similarly split into two targets, with some juggling. * The top level tools/go_branch.sh now does a crossbuild of ARM64 as well, and checks and merges the results of the two branches together. Fixes #5178 PiperOrigin-RevId: 351304330
2021-01-08Support releasing aarch64 builds.Adin Scannell
This change works around an issue in rules_pkg, described here: https://github.com/bazelbuild/rules_pkg/pull/263 PiperOrigin-RevId: 350869030
2021-01-08Fix sha256 for github-workflow.json.Adin Scannell
This was not being tested as part of the unit test workflows, and thus was not being hit normally. These tests are also added to the unit tests target. PiperOrigin-RevId: 350766814
2021-01-07Add ARM smoke testAndrei Vagin
make BAZEL_CONFIG=aarch64 arm-qemu-smoke-test Signed-off-by: Andrei Vagin <avagin@gmail.com>
2021-01-07Fix native benchmarks.Adin Scannell
PiperOrigin-RevId: 350509137
2021-01-06Export a pprof visualization endpoint.Adin Scannell
This allows us to link directly to profiling results from the build results. The code uses the standard pprof http server, exported from the Cloud Run instance. PiperOrigin-RevId: 350440910
2021-01-05Add benchmarks targets to BuildKite.Adin Scannell
This includes minor fix-ups: * Handle SIGTERM in runsc debug, to exit gracefully. * Fix cmd.debug.go opening all profiles as RDONLY. * Fix the test name in fio_test.go, and encode the block size in the test. PiperOrigin-RevId: 350205718
2020-12-30Add BuildKite annotations for failures and profiles.Adin Scannell
This change cleans up some minor Makefile issues, and adds support for BuildKite annotations on failure and on profiles being generated. These annotations will make failures very clear and link to the artifacts. This change is a stepping stone for aggregating coverage data from all individual test jobs, as this will also happen in .buildkite/annotate.sh. PiperOrigin-RevId: 349606598
2020-12-17Set --nocache_test_results to runtime testsFabricio Voznika
If not set, the cached result is used even when runtime options are changed, because they are not visible to blaze/bazel. PiperOrigin-RevId: 348074339
2020-12-16Restore refresh target.Adin Scannell
PiperOrigin-RevId: 347864621
2020-12-11Fix run and sudo targets.Adin Scannell
These are not passing arguments properly. This breaks the current pre-command for BuildKite. PiperOrigin-RevId: 347062729
2020-12-10Fix website buildIan Lewis
Fix 'run' function call so that parameters are passed properly to the function. PiperOrigin-RevId: 346929952
2020-12-09Refactor the Makefile to avoid recursive Make.Adin Scannell
Recursive make is difficult to follow and debug. Drop this by using internal functions, which, while difficult, are easier than trying to following recursive invokations. Further simplify the Makefile by collapsing the image bits and removing the tools/vm directory, which is effectively unused. Fixes #4952 PiperOrigin-RevId: 346569133
2020-12-07Support icmpv6 transport protocolPeter Johnston
PiperOrigin-RevId: 346101076
2020-12-04Update containerd tests for 1.4+ to 1.4.3.Adin Scannell
PiperOrigin-RevId: 345764404
2020-12-04Fix load-benchmarks-images call.Zach Koopmans
make load-benchmarks-images is empty with the deleted line. PiperOrigin-RevId: 345741855
2020-12-03Update containerd to 1.3.9Fabricio Voznika
PiperOrigin-RevId: 345564927
2020-12-03Support partitions for other tests.Adin Scannell
PiperOrigin-RevId: 345399936
2020-11-23Clean up build output.Adin Scannell
This change also simplifies and documents the build_cmd pipeline, and reduces general noise for debugging Makefile issues. It also drops the mapping for /etc/docker/daemon.json, which if it does not exist initially will create this as a directory (causing lots of confusion and breaks). PiperOrigin-RevId: 343932456
2020-11-12[infra] Do not use debug flags for testing.Ayush Ranjan
This causes some networking related tests to take a very long time. Upon failure, tests can be manually run with debug flags to debug. As is the strace logs are not available from a test run. PiperOrigin-RevId: 342156294
2020-11-10Add debug logs to startup benchmark.Zach Koopmans
PiperOrigin-RevId: 341757694
2020-11-10Show run-benchmark output.Adin Scannell
PiperOrigin-RevId: 341667792
2020-11-09Evaluate T as a shell variable, not a Make variable.Adin Scannell
PiperOrigin-RevId: 341531230
2020-11-06Add pull image statment to benchmarks rule.Zach Koopmans
PiperOrigin-RevId: 341132662
2020-11-05[runtime tests] Add partitions to runtime tests.Ayush Ranjan
This will allow us to run massive runtime tests live java to run in parallel across multiple jobs. PiperOrigin-RevId: 340956246
2020-11-05Internal ChangeZach Koopmans
PiperOrigin-RevId: 340941898
2020-10-29Make RedirectTarget thread safeKevin Krakauer
Fixes #4613. PiperOrigin-RevId: 339746784
2020-10-22Add a platform portability blog postIan Lewis
Also fixes the docker_image bazel rule, and website-server make target. Fixes #3273 PiperOrigin-RevId: 338606668
2020-10-19Remove legacy bazel configurations.Adin Scannell
Using the newer bazel rules necessitates a transition from proto1 to proto2. In order to resolve the incompatibility between proto2 and gogoproto, the cri runtimeoptions proto must be vendored. Further, some of the semantics of bazel caching changed during the transition. It is now necessary to: - Ensure that :gopath depends only on pure library targets, as the propagation of go_binary build attributes (pure, static) will affected the generated files (though content remains the same, there are conflicts with respect to the gopath). - Update bazel.mk to include the possibility of binaries in the bazel-out directory, as it will now put runsc and others there. This required some refinements to the mechanism of extracting paths, since some the existing regex resulted in false positives. - Change nogo rules to prevent escape generation on binary targets. For some reason, the newer version of bazel attempted to run the nogo analysis on the binary targets, which fails due to the fact that objdump does not work on the final binary. This must be due to a change in the semantics of aspects in bazel3. PiperOrigin-RevId: 337958324
2020-10-15Add easier-to-use docker_image target.Adin Scannell
PiperOrigin-RevId: 337415009
2020-10-07Add staticcheck and staticstyle analyzers.Adin Scannell
This change also adds support to go_stateify for detecting an appropriate receiver name, avoiding a large number of false positives. PiperOrigin-RevId: 335994587
2020-09-29Add nogo check annotations to GitHub.Adin Scannell
When nogo checks are violated, they will automatically posted as annotations on the specific GitHub commit. This allows us to ensure analysis & style rules and have them called out. PiperOrigin-RevId: 334447285
2020-09-21Port fuse tests to Makefile.Ayush Ranjan
PiperOrigin-RevId: 332878900
2020-09-17ip6tables: filter table supportKevin Krakauer
`ip6tables -t filter` is now usable. NAT support will come in a future CL. #3549 PiperOrigin-RevId: 332381801
2020-09-17Fix root tests target in Makefile.Ayush Ranjan
PiperOrigin-RevId: 332358833
2020-09-14Fix modprobe dependencyKevin Krakauer
The modprobe command only takes 1 module per invocation. The second module name is being passed as a module parameter. PiperOrigin-RevId: 331585765
2020-09-10[vfs] Add vfs2 runtime tests.Ayush Ranjan
PiperOrigin-RevId: 330981912
2020-09-07Fix make_apt script.Ayush Ranjan
This change makes the following fixes: - When creating a test repo.key, create a secret keyring as other workflows also use secret keyrings only. - We should not be using both --keyring and --secret-keyring options. Just use --secret-keyring. - Pass homedir to all gpg commands. dpkg-sig takes an arg -g which stands for gpgopts. So we need to pass the homedir there too. PiperOrigin-RevId: 330443280
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-03 04:46:28 +0000