summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2020-01-10I think INPUT works with protocolKevin Krakauer
2020-01-09Confirmed that it works if I hardcode 17 in for pkt.Protocol. Need to ↵Kevin Krakauer
address parsing the packet early :(
2020-01-09Added a test that we don't pass yetKevin Krakauer
2020-01-08Working on filtering by protocol.Kevin Krakauer
2020-01-08It works! It drops some packets.Kevin Krakauer
2020-01-08Merge branch 'iptables-write' into iptables-write-input-dropKevin Krakauer
2020-01-08More GH comments.Kevin Krakauer
2020-01-08Addressed GH commentsKevin Krakauer
2020-01-08Getting a panic when running tests. For some reason the filter table isKevin Krakauer
ending up with the wrong chains and is indexing -1 into rules.
2020-01-08Built dead-simple traversal, but now getting depedency cycle error :'(Kevin Krakauer
2020-01-08Added test for unconditional DROP on the filter INPUT chainKevin Krakauer
2020-01-08First commit -- re-adding DROPKevin Krakauer
2020-01-08Revert go.mod and go.sumKevin Krakauer
2020-01-08Comment cleanup.Kevin Krakauer
2020-01-08NewlineKevin Krakauer
2020-01-08Revert filter_input changeKevin Krakauer
2020-01-08Minor fixes to comments and loggingKevin Krakauer
2020-01-08Write simple ACCEPT rules to the filter table.Kevin Krakauer
This gets us closer to passing the iptables tests and opens up iptables so it can be worked on by multiple people. A few restrictions are enforced for security (i.e. we don't want to let users write a bunch of iptables rules and then just not enforce them): - Only the filter table is writable. - Only ACCEPT rules with no matching criteria can be added.
2020-01-08Add NIC.isLoopback()Bert Muthalaly
...enabling us to remove the "CreateNamedLoopbackNIC" variant of CreateNIC and all the plumbing to connect it through to where the value is read in FindRoute. PiperOrigin-RevId: 288713093
2020-01-07fs/splice: don't report a partialResult error if there is no data lossAndrei Vagin
PiperOrigin-RevId: 288642552
2020-01-07Fix partial_bad_buffer write tests.Adin Scannell
The write tests are fitted to Linux-specific behavior, but it is not well-specified. Tweak the tests to allow for both acceptable outcomes. PiperOrigin-RevId: 288606386
2020-01-07Support deprecating SLAAC addresses after the preferred lifetimeGhanan Gowripalan
Support deprecating network endpoints on a NIC. If an endpoint is deprecated, it should not be used for new connections unless a more preferred endpoint is not available, or unless the deprecated endpoint was explicitly requested. Test: Test that deprecated endpoints are only returned when more preferred endpoints are not available and SLAAC addresses are deprecated after its preferred lifetime PiperOrigin-RevId: 288562705
2020-01-07Disable auto-generation of IPv6 link-local addresses for loopback NICsGhanan Gowripalan
Test: Test that an IPv6 link-local address is not auto-generated for loopback NICs, even when it is enabled for non-loopback NICS. PiperOrigin-RevId: 288519591
2020-01-06Fix readme formatting.Kevin Krakauer
PiperOrigin-RevId: 288402480
2020-01-06Pass the NIC-internal name to the NIC name function when generating opaque IIDsGhanan Gowripalan
Pass the NIC-internal name to the NIC name function when generating opaque IIDs so implementations can use the name that was provided when the NIC was created. Previously, explicit NICID to NIC name resolution was required from the netstack integrator. Tests: Test that the name provided when creating a NIC is passed to the NIC name function when generating opaque IIDs. PiperOrigin-RevId: 288395359
2020-01-06platform/syscall: use syscall + int3 to execute a system call in a stub processAndrei Vagin
Right now, we need to call ptrace(PTRACE_SYSCALL) and wait() twice to execute one system call in a stub process. With these changes, we will need to call ptrace + wait only once. In addition, this allows to workaround the kernel bug when a stub process doesn't stop on syscall-exit-stop and starts executing the next system call. Reported-by: syzbot+37143cafa8dc3b5008ee@syzkaller.appspotmail.com PiperOrigin-RevId: 288393029
2020-01-06Convert memfs into proto-tmpfs.Nicolas Lacasse
- Renamed memfs to tmpfs. - Copied fileRangeSet bits from fs/fsutil/ to fsimpl/tmpfs/ - Changed tmpfs to be backed by filemem instead of byte slice. - regularFileReadWriter uses a sync.Pool, similar to gofer client. PiperOrigin-RevId: 288356380
2020-01-06Implement rseq(2)Michael Pratt
PiperOrigin-RevId: 288342928
2020-01-06Cleanup Shm reference handlingMichael Pratt
Currently, shm.Registry.FindByID will return Shm instances without taking an additional reference on them, making it possible for them to disappear. More explicitly handle references. All callers hold a reference for the duration that they hold the instance. Registry.shms may transitively hold Shms with no references, so it must TryIncRef to determine if they are still valid. PiperOrigin-RevId: 288314529
2020-01-03Use opaque interface identifiers when generating IPv6 addresses via SLAACGhanan Gowripalan
Support using opaque interface identifiers when generating IPv6 addresses via SLAAC when configured to do so. Note, this change does not handle retries in response to DAD conflicts yet. That will also come in a later change. Test: Test that when SLAAC addresses are generated, they use opaque interface identifiers when configured to do so. PiperOrigin-RevId: 288078605
2020-01-03Remove FIXME comments to close old bug.Zach Koopmans
PiperOrigin-RevId: 288075400
2020-01-03Support generating opaque interface identifiers as defined by RFC 7217Ghanan Gowripalan
Support generating opaque interface identifiers as defined by RFC 7217 for auto-generated IPv6 link-local addresses. Opaque interface identifiers will also be used for IPv6 addresses auto-generated via SLAAC in a later change. Note, this change does not handle retries in response to DAD conflicts yet. That will also come in a later change. Tests: Test that when configured to generated opaque IIDs, they are properly generated as outlined by RFC 7217. PiperOrigin-RevId: 288035349
2019-12-30Add VFS2 support for device special files.Jamie Liu
- Add FileDescriptionOptions.UseDentryMetadata, which reduces the amount of boilerplate needed for device FDs and the like between filesystems. - Switch back to having FileDescription.Init() take references on the Mount and Dentry; otherwise managing refcounts around failed calls to OpenDeviceSpecialFile() / Device.Open() is tricky. PiperOrigin-RevId: 287575574
2019-12-27Add VFS2 support for /proc/filesystems.Jamie Liu
Updates #1195 PiperOrigin-RevId: 287269106
2019-12-26Initial procfs implementation in VFSv2Fabricio Voznika
Updates #1195 PiperOrigin-RevId: 287227722
2019-12-26Merge pull request #1461 from xiaobo55x:ptrace_sysemugVisor bot
PiperOrigin-RevId: 287225250
2019-12-26Merge pull request #1460 from lubinszARM:pr_clean_code1gVisor bot
PiperOrigin-RevId: 287221280
2019-12-26Automated rollback of changelist 287029703gVisor bot
PiperOrigin-RevId: 287217899
2019-12-24Enable IP_RECVTOS socket option for datagram socketsRyan Heacock
Added the ability to get/set the IP_RECVTOS socket option on UDP endpoints. If enabled, TOS from the incoming Network Header passed as ancillary data in the ControlMessages. Test: * Added unit test to udp_test.go that tests getting/setting as well as verifying that we receive expected TOS from incoming packet. * Added a syscall test PiperOrigin-RevId: 287029703
2019-12-24slight changes to ring0&pagetables for Arm64Bin Lu
There are 2 jobs have been finished in this patch: 1, a comment was added to explain the purpose of the extra NOPs in Vectors(). 2, some merge errors were fixed. Signed-off-by: Bin Lu <bin.lu@arm.com>
2019-12-23Fix deadlock in kernfs.Filesystem.revalidateChildLockedFabricio Voznika
It was calling Dentry.InsertChild with the dentry's mutex already locked. Updates #1035 PiperOrigin-RevId: 286962742
2019-12-23Clean up vfs.FilesystemImpl methods that operate on parent directories.Jamie Liu
- Make FilesystemImpl methods that operate on parent directories require !rp.Done() (i.e. there is at least one path component to resolve) as precondition and postcondition (in cases where they do not finish path resolution due to mount boundary / absolute symlink), and require that they do not need to follow the last path component (the file being created / deleted) as a symlink. Check for these in VFS. - Add FilesystemImpl.GetParentDentryAt(), which is required to obtain the old parent directory for VFS.RenameAt(). (Passing the Dentry to be renamed instead has the wrong semantics if the file named by the old path is a mount point since the Dentry will be on the wrong Mount.) - Update memfs to implement these methods correctly (?), including RenameAt. - Change fspath.Parse() to allow empty paths (to simplify implementation of AT_EMPTY_PATH). - Change vfs.PathOperation to take a fspath.Path instead of a raw pathname; non-test callers will need to fspath.Parse() pathnames themselves anyway in order to detect absolute paths and select PathOperation.Start accordingly. PiperOrigin-RevId: 286934941
2019-12-23Add python3-pip as dependency for Kokoro VM images.Zach Koopmans
bm-tools requires python3 and pip3 in order to run tests. Add pip3 so that dependencies correctly install for Kokoro runs with bazel. PiperOrigin-RevId: 286923840
2019-12-23Clear any host-specific NDP state when becoming a routerGhanan Gowripalan
This change supports clearing all host-only NDP state when NICs become routers. All discovered routers, discovered on-link prefixes and auto-generated addresses will be invalidated when becoming a router. This is because normally, routers do not process Router Advertisements to discover routers or on-link prefixes, and do not do SLAAC. Tests: Unittest to make sure that all discovered routers, discovered prefixes and auto-generated addresses get invalidated when transitioning from a host to a router. PiperOrigin-RevId: 286902309
2019-12-23Replace syscall.PTRACE_SYSEMU with unix.PTRACE_SYSEMUHaibo Xu
Linux PTRACE_SYSEMU support on arm64 was merged to mainline from V5.3, and the corresponding support in go also enabled recently. Since the "syscall" package is locked down from go 1.4, so the ptrace PTRACE_SYSEMU definition can't be added to package "syscall" on arm64. According to the golang community, updates required by new systems or versions should use the corresponding package in the golang.org/x/sys repository instead(https://golang.org/pkg/syscall/). Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I2f917bb2be62f990c3e158e2bb99e094ea03f751
2019-12-20Merge pull request #1026 from lubinszARM:pr_savablegVisor bot
PiperOrigin-RevId: 286667216
2019-12-20Add vfs.ResolvingPath.HandleJump().Jamie Liu
PiperOrigin-RevId: 286666533
2019-12-20Add vfs.Dentry.Children().Jamie Liu
PiperOrigin-RevId: 286660774
2019-12-20Change TODO to track correct bug.Kevin Krakauer
PiperOrigin-RevId: 286639163
2019-12-20Move VFS2 file description status flags to vfs.FileDescription.Jamie Liu
PiperOrigin-RevId: 286616668
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 02:29:21 +0000