summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2018-10-19Use correct company name in copyright headerIan Gudger
PiperOrigin-RevId: 217951017 Change-Id: Ie08bf6987f98467d07457bcf35b5f1ff6e43c035
2018-10-18Resolve mount paths while setting up root fs mountFabricio Voznika
It's hard to resolve symlinks inside the sandbox because rootfs and mounts may be read-only, forcing us to create mount points inside lower layer of an overlay, **before** the volumes are mounted. Since the destination must already be resolved outside the sandbox when creating mounts, take this opportunity to rewrite the spec with paths resolved. "runsc boot" will use the "resolved" spec to load mounts. In addition, symlink traversals were disabled while mounting containers inside the sandbox. It haven't been able to write a good test for it. So I'm relying on manual tests for now. PiperOrigin-RevId: 217749904 Change-Id: I7ac434d5befd230db1488446cda03300cc0751a9
2018-10-18Skip TestPythonHello on ptrace platform while we debug the issue.Nicolas Lacasse
PiperOrigin-RevId: 217743078 Change-Id: I47fabd88139b968b6183bcc0340065fdbbc1d40d
2018-10-17Use generic ilist in Unix transport queueIan Gudger
This should improve performance. PiperOrigin-RevId: 217610560 Change-Id: I370f196ea2396f1715a460b168ecbee197f94d6c
2018-10-17Close the gofer socket gracefully in boot:boot_test.Nicolas Lacasse
We were closing the FD directly. If the test then created a new socket pair with the same FD, in-flight RPCs would get directed to the new socket and break the test. Instead, we should use unet.Socket.Close(), which allows any in-flight RPCs to finish. PiperOrigin-RevId: 217608491 Change-Id: I8c5a76638899ba30f33ca976e6fac967fa0aadbf
2018-10-17Check thread group CPU timers in the CPU clock ticker.Jamie Liu
This reduces the number of goroutines and runtime timers when ITIMER_VIRTUAL or ITIMER_PROF are enabled, or when RLIMIT_CPU is set. This also ensures that thread group CPU timers only advance if running tasks are observed at the time the CPU clock advances, mostly eliminating the possibility that a CPU timer expiration observes no running tasks and falls back to the group leader. PiperOrigin-RevId: 217603396 Change-Id: Ia24ce934d5574334857d9afb5ad8ca0b6a6e65f4
2018-10-17Merge queue into Unix transportIan Gudger
This queue only has a single user, so there is no need for it to use an interface. Merging it into the same package as its sole user allows us to avoid a circular dependency. This simplifies the code and should slightly improve performance. PiperOrigin-RevId: 217595889 Change-Id: Iabbd5164240b935f79933618c61581bc8dcd2822
2018-10-17Relativize all socket paths in tests.Nicolas Lacasse
Otherwise they may exceed the maximum. PiperOrigin-RevId: 217584658 Change-Id: I869e400d3409599c0d3b85c6590702c052f49550
2018-10-17Fix typos in socket_testIan Gudger
PiperOrigin-RevId: 217576188 Change-Id: I82e45c306c5c9161e207311c7dbb8a983820c1df
2018-10-17Reflow comment to 80 columnsMichael Pratt
PiperOrigin-RevId: 217573168 Change-Id: Ic1914d0ef71bab020e3ee11cf9c4a50a702bd8dd
2018-10-17runsc: Support job control signals for the root container.Nicolas Lacasse
Now containers run with "docker run -it" support control characters like ^C and ^Z. This required refactoring our signal handling a bit. Signals delivered to the "runsc boot" process are turned into loader.Signal calls with the appropriate delivery mode. Previously they were always sent directly to PID 1. PiperOrigin-RevId: 217566770 Change-Id: I5b7220d9a0f2b591a56335479454a200c6de8732
2018-10-17Fix PTRACE_GETREGSET write sizeMichael Pratt
The existing logic is backwards and writes iov_len == 0 for a full write. PiperOrigin-RevId: 217560377 Change-Id: I5a39c31bf0ba9063a8495993bfef58dc8ab7c5fa
2018-10-17Move Unix transport out of netstackIan Gudger
PiperOrigin-RevId: 217557656 Change-Id: I63d27635b1a6c12877279995d2d9847b6a19da9b
2018-10-17Remove incorrect TODO.Kevin Krakauer
PiperOrigin-RevId: 217548429 Change-Id: Ie640c881fdc4fc70af58c8ca834df1ac531e519a
2018-10-17runsc: Add --pid flag to runsc kill.Kevin Krakauer
--pid allows specific processes to be signalled rather than the container root process or all processes in the container. containerd needs to SIGKILL exec'd processes that timeout and check whether processes are still alive. PiperOrigin-RevId: 217547636 Change-Id: I2058ebb548b51c8eb748f5884fb88bad0b532e45
2018-10-17compressio: do not schedule new I/Os when there is no worker (stream closed).Zhaozhong Ni
PiperOrigin-RevId: 217536677 Change-Id: Ib9a5a2542df12d0bc5592b91463ffd646e2ec295
2018-10-17Attempt to deflake TestPythonHelloFabricio Voznika
It has timed out running with kokoro a few times. I passes consistently on my machine (200+ runsc). Increase the timeout to see if it helps. Failure: image_test.go:212: WaitForHTTP() timeout: Get http://localhost:32785/: dial tcp [::1]:32785: connect: connection refused PiperOrigin-RevId: 217532428 Change-Id: Ibf860aecf537830bef832e436f2e804b3fc12f2d
2018-10-17Bump Pause/Resume integration test timeout in attempt to deflake Kokoro.Nicolas Lacasse
This is one of the many tests that fails periodically, making Kokoro unstable. PiperOrigin-RevId: 217528257 Change-Id: I2508ecf4d74d71b91feff1183544d61d7bd16995
2018-10-17Make removing cgroups retry up to 5 seconds.Nicolas Lacasse
Sometimes if we try to remove the cgroup directory too soon after killing the sandbox we EBUSY. This CL adds a retry (up to 5 seconds) for removing. Deflakes ChrootTest. PiperOrigin-RevId: 217526909 Change-Id: I749bb172117e2298c9888ecad094072393b94810
2018-10-17Bump rules_go and gazelle versions.Nicolas Lacasse
PiperOrigin-RevId: 217526027 Change-Id: I21261f5172d8eb50820f1e9f1624d24603089f12
2018-10-16Bump sandbox start and stop timeouts.Nicolas Lacasse
PiperOrigin-RevId: 217433699 Change-Id: Icef08285728c23ee7dd650706aaf18da51c25dff
2018-10-15Refactor host.ConnectedEndpointIan Gudger
* Integrate recvMsg and sendMsg functions into Recv and Send respectively as they are no longer shared. * Clean up partial read/write error handling code. * Re-order code to make sense given that there is no longer a host.endpoint type. PiperOrigin-RevId: 217255072 Change-Id: Ib43fe9286452f813b8309d969be11f5fa40694cd
2018-10-15Merge host.endpoint into host.ConnectedEndpointIan Gudger
host.endpoint contained duplicated logic from the sockerpair implementation and host.ConnectedEndpoint. Remove host.endpoint in favor of a host.ConnectedEndpoint wrapped in a socketpair end. PiperOrigin-RevId: 217240096 Change-Id: I4a3d51e3fe82bdf30e2d0152458b8499ab4c987c
2018-10-15Clean up Rename and Unlink checks for EBUSY.Nicolas Lacasse
- Change Dirent.Busy => Dirent.isMountPoint. The function body is unchanged, and it is no longer exported. - fs.MayDelete now checks that the victim is not the process root. This aligns with Linux's namei.c:may_delete(). - Fix "is-ancestor" checks to actually compare all ancestors, not just the parents. - Fix handling of paths that end in dots, which are handled differently in Rename vs. Unlink. PiperOrigin-RevId: 217239274 Change-Id: I7a0eb768e70a1b2915017ce54f7f95cbf8edf1fb
2018-10-15Never send boot process stdio to application stdio.Nicolas Lacasse
We treat handle the boot process stdio separately from the application stdio (which gets passed via flags), but we were still sending both to same place. As a result, some logs that are written directly to os.Stderr by the boot process were ending up in the application logs. This CL starts sendind boot process stdio to the null device (since we don't have any better options). The boot process is already configured to send all logs (and panics) to the log file, so we won't miss anything important. PiperOrigin-RevId: 217173020 Change-Id: I5ab980da037f34620e7861a3736ba09c18d73794
2018-10-15sentry: save fs.Dirent deleted info.Zhaozhong Ni
PiperOrigin-RevId: 217155458 Change-Id: Id3265b1ec784787039e2131c80254ac4937330c7
2018-10-12runsc: Support retrieving MTU via netdevice ioctl.Kevin Krakauer
This enables ifconfig to display MTU. PiperOrigin-RevId: 216917021 Change-Id: Id513b23d9d76899bcb71b0b6a25036f41629a923
2018-10-12Added spec command to create OCI spec config.jsonIan Lewis
The spec command is analygous to the 'runc spec' command and allows for the convenient creation of a config.json file for users that don't have runc handy. Change-Id: Ifdfec37e023048ea461c32da1a9042a45b37d856 PiperOrigin-RevId: 216907826
2018-10-11Make the gofer process enter namespacesFabricio Voznika
This is done to further isolate the gofer from the host. PiperOrigin-RevId: 216790991 Change-Id: Ia265b77e4e50f815d08f743a05669f9d75ad7a6f
2018-10-11Fix reference leak in tests.Nicolas Lacasse
PiperOrigin-RevId: 216780438 Change-Id: Ide637fe36f8d2a61fea9e5b16d1b3401f2540416
2018-10-11Make Wait() return the sandbox exit status if the sandbox has exited.Nicolas Lacasse
It's possible for Start() and Wait() calls to race, if the sandboxed application is short-lived. If the application finishes before (or during) the Wait RPC, then Wait will fail. In practice this looks like "connection refused" or "EOF" errors when waiting for an RPC response. This race is especially bad in tests, where we often run "true" inside a sandbox. This CL does a best-effort fix, by returning the sandbox exit status as the container exit status. In most cases, these are the same. This fixes the remaining flakes in runsc/container:container_test. PiperOrigin-RevId: 216777793 Change-Id: I9dfc6e6ec885b106a736055bc7a75b2008dfff7a
2018-10-11Add String() method to AddressMaskFabricio Voznika
PiperOrigin-RevId: 216770391 Change-Id: Idcdc28b2fe9e1b0b63b8119d445f05a8bcbce81e
2018-10-11Make debug log file name configurableFabricio Voznika
This is a breaking change if you're using --debug-log-dir. The fix is to replace it with --debug-log and add a '/' at the end: --debug-log-dir=/tmp/runsc ==> --debug-log=/tmp/runsc/ PiperOrigin-RevId: 216761212 Change-Id: I244270a0a522298c48115719fa08dad55e34ade1
2018-10-11Add client sanity checking for P9.Adin Scannell
This should reduce use-after-free errors and accidental close via create or remove. This change includes one functional fix as well: when closing via remove, the closed field was not set and the finalizer was not freed, so the file would have been clunked at some random point in the future. PiperOrigin-RevId: 216750000 Change-Id: Ice3292c6feb953ae97abac308afbafd2d9410402
2018-10-11Sandbox cgroup testsFabricio Voznika
Verify that cgroup is being properly set. PiperOrigin-RevId: 216736137 Change-Id: I0e27fd604eca67e7dd2e3548dc372ca9cc416309
2018-10-11Add bare bones unsupported syscall loggingFabricio Voznika
This change introduces a new flags to create/run called --user-log. Logs to this files are visible to users and are meant to help debugging problems with their images and containers. For now only unsupported syscalls are sent to this log, and only minimum support was added. We can build more infrastructure around it as needed. PiperOrigin-RevId: 216735977 Change-Id: I54427ca194604991c407d49943ab3680470de2d0
2018-10-11sentry: allow saving of unlinked files with open fds on virtual fs.Zhaozhong Ni
PiperOrigin-RevId: 216733414 Change-Id: I33cd3eb818f0c39717d6656fcdfff6050b37ebb0
2018-10-10Add seccomp filter configuration to ptrace stubs.Adin Scannell
This is a defense-in-depth measure. If the sentry is compromised, this prevents system call injection to the stubs. There is some complexity with respect to ptrace and seccomp interactions, so this protection is not really available for kernel versions < 4.8; this is detected dynamically. Note that this also solves the vsyscall emulation issue by adding in appropriate trapping for those system calls. It does mean that a compromised sentry could theoretically inject these into the stub (ignoring the trap and resume, thereby allowing execution), but they are harmless. PiperOrigin-RevId: 216647581 Change-Id: Id06c232cbac1f9489b1803ec97f83097fcba8eb8
2018-10-10Removes irrelevant TODO.Kevin Krakauer
PiperOrigin-RevId: 216616873 Change-Id: I4d974ab968058eadd01542081e18a987ef08f50a
2018-10-10runsc: Pass controlling TTY by FD in the *new* process, not current process.Nicolas Lacasse
When setting Cmd.SysProcAttr.Ctty, the FD must be the FD of the controlling TTY in the new process, not the current process. The ioctl call is made after duping all FDs in Cmd.ExtraFiles, which may stomp on the old TTY FD. This fixes the "bad address" flakes in runsc/container:container_test, although some other flakes remain. PiperOrigin-RevId: 216594394 Change-Id: Idfd1677abb866aa82ad7e8be776f0c9087256862
2018-10-10Support for older Linux kernels without getrandomJonathan Giannuzzi
Change-Id: I1fb9f5b47a264a7617912f6f56f995f3c4c5e578 PiperOrigin-RevId: 216591484
2018-10-10Enforce message size limits and avoid host calls with too many iovecsMichael Pratt
Currently, in the face of FileMem fragmentation and a large sendmsg or recvmsg call, host sockets may pass > 1024 iovecs to the host, which will immediately cause the host to return EMSGSIZE. When we detect this case, use a single intermediate buffer to pass to the kernel, copying to/from the src/dst buffer. To avoid creating unbounded intermediate buffers, enforce message size checks and truncation w.r.t. the send buffer size. The same functionality is added to netstack unix sockets for feature parity. PiperOrigin-RevId: 216590198 Change-Id: I719a32e71c7b1098d5097f35e6daf7dd5190eff7
2018-10-10When creating a new process group, add it to the session.Nicolas Lacasse
PiperOrigin-RevId: 216554791 Change-Id: Ia6b7a2e6eaad80a81b2a8f2e3241e93ebc2bda35
2018-10-10Add sandbox to cgroupFabricio Voznika
Sandbox creation uses the limits and reservations configured in the OCI spec and set cgroup options accordinly. Then it puts both the sandbox and gofer processes inside the cgroup. It also allows the cgroup to be pre-configured by the caller. If the cgroup already exists, sandbox and gofer processes will join the cgroup but it will not modify the cgroup with spec limits. PiperOrigin-RevId: 216538209 Change-Id: If2c65ffedf55820baab743a0edcfb091b89c1019
2018-10-09Add tests to verify gofer is chroot'edFabricio Voznika
PiperOrigin-RevId: 216472439 Change-Id: Ic4cb86c8e0a9cb022d3ceed9dc5615266c307cf9
2018-10-09Add new netstack metrics to the sentryIan Gudger
PiperOrigin-RevId: 216431260 Change-Id: Ia6e5c8d506940148d10ff2884cf4440f470e5820
2018-10-09Add memunit to sysinfo(2).Brian Geffon
Also properly add padding after Procs in the linux.Sysinfo structure. This will be implicitly padded to 64bits so we need to do the same. PiperOrigin-RevId: 216372907 Change-Id: I6eb6a27800da61d8f7b7b6e87bf0391a48fdb475
2018-10-08Job control signals must be sent to all processes in the FG process group.Nicolas Lacasse
We were previously only sending to the originator of the process group. Integration test was changed to test this behavior. It fails without the corresponding code change. PiperOrigin-RevId: 216297263 Change-Id: I7e41cfd6bdd067f4b9dc215e28f555fb5088916f
2018-10-08Uncapitalize errorMichael Pratt
PiperOrigin-RevId: 216281263 Change-Id: Ie0c189e7f5934b77c6302336723bc1181fd2866c
2018-10-08Statfs Namelen should be NAME_MAX not PATH_MAXMichael Pratt
We accidentally set the wrong maximum. I've also added PATH_MAX and NAME_MAX to the linux abi package. PiperOrigin-RevId: 216221311 Change-Id: I44805fcf21508831809692184a0eba4cee469633
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-01 20:37:41 +0000