summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2020-09-16Merge release-20200907.0-67-gb6d165fe9 (automated)gVisor bot
2020-09-16Automated rollback of changelist 329526153Nayana Bidari
PiperOrigin-RevId: 332097286
2020-09-16Merge release-20200907.0-66-g29ce0ad16 (automated)gVisor bot
2020-09-16Bind loopback subnets' lifetime to perm addressGhanan Gowripalan
The lifetime of addreses in a loopback interface's associated subnets should be bound to their respective permanent addresses. This change also fixes a race when the stack attempts to get an IPv4 rereferencedNetworkEndpoint for an address in an associated subnet on a loopback interface. Before this change, the stack would only check if an IPv4 address is contained in an associated subnet while holding a read lock but wouldn't do this same check after releasing the read lock for a write lock to create a temporary address. This may cause the stack to bind the lifetime of the address to a new (temporary) endpoint instead of the associated subnet's permanent address. Test: integration_test.TestLoopbackSubnetLifetimeBoundToAddr PiperOrigin-RevId: 332094719
2020-09-16Merge release-20200907.0-65-g3749e70a6 (automated)gVisor bot
2020-09-16Implement PRead for verity fsChong Cai
PRead is implemented by read from the underlying file in blocks, and verify each block. The verified contents are saved into the output buffer. PiperOrigin-RevId: 332092267
2020-09-16Merge release-20200907.0-64-g666397c5c (automated)gVisor bot
2020-09-16Gracefully translate unknown errno.Ting-Yu Wang
Neither POSIX.1 nor Linux defines an upperbound for errno. PiperOrigin-RevId: 332085017
2020-09-16Merge release-20200907.0-63-g0356c7ef3 (automated)gVisor bot
2020-09-16[runtime tests] Add documentation.Ayush Ranjan
Added a README describing what these tests are, how they work and how to run them locally. Also reorganized the exclude files into a directory. PiperOrigin-RevId: 332079697
2020-09-16Merge release-20200907.0-62-g49857849f (automated)gVisor bot
2020-09-16Merge pull request #3893 from lubinszARM:pr_n1_03gVisor bot
PiperOrigin-RevId: 332069743
2020-09-16Merge release-20200907.0-60-g87c5c0ad2 (automated)gVisor bot
2020-09-16Receive broadcast packets on interested endpointsGhanan Gowripalan
When a broadcast packet is received by the stack, the packet should be delivered to each endpoint that may be interested in the packet. This includes all any address and specified broadcast address listeners. Test: integration_test.TestReuseAddrAndBroadcast PiperOrigin-RevId: 332060652
2020-09-16Merge release-20200907.0-59-g326a1dbb7 (automated)gVisor bot
2020-09-16Refactor removed default test dimensionFabricio Voznika
ptrace was always selected as a dimension before, but not anymore. Some tests were specifying "overlay" expecting that to be in addition to the default. PiperOrigin-RevId: 332004111
2020-09-16Merge release-20200907.0-58-g9ef1c7992 (automated)gVisor bot
2020-09-16Rename marshal.Task to marshal.CopyContext.Rahat Mahmood
CopyContext is a better name for the interface because from go-marshal's perspective, the interface has nothing to do with a task. A kernel.Task happens to implement the interface, but so can other things like MemoryManager and IO sequences. PiperOrigin-RevId: 331959678
2020-09-16Merge release-20200907.0-57-gd201feb8c (automated)gVisor bot
2020-09-15Enable automated marshalling for the syscall package.Rahat Mahmood
PiperOrigin-RevId: 331940975
2020-09-16Merge release-20200907.0-56-gdcd532e2e (automated)gVisor bot
2020-09-15Add support for OCI seccomp filters in the sandbox.Ian Lewis
OCI configuration includes support for specifying seccomp filters. In runc, these filter configurations are converted into seccomp BPF programs and loaded into the kernel via libseccomp. runsc needs to be a static binary so, for runsc, we cannot rely on a C library and need to implement the functionality in Go. The generator added here implements basic support for taking OCI seccomp configuration and converting it into a seccomp BPF program with the same behavior as a program generated by libseccomp. - New conditional operations were added to pkg/seccomp to support operations available in OCI. - AllowAny and AllowValue were renamed to MatchAny and EqualTo to better reflect that syscalls matching the conditionals result in the provided action not simply SCMP_RET_ALLOW. - BuildProgram in pkg/seccomp no longer panics if provided an empty list of rules. It now builds a program with the architecture sanity check only. - ProgramBuilder now allows adding labels that are unused. However, backwards jumps are still not permitted. Fixes #510 PiperOrigin-RevId: 331938697
2020-09-16Merge release-20200907.0-55-gc053c4bb0 (automated)gVisor bot
2020-09-15Fix GitHub issue template.Ian Lewis
runsc -v doesn't work. It should be runsc -version PiperOrigin-RevId: 331911035
2020-09-16Merge release-20200907.0-54-gcb2e3c946 (automated)gVisor bot
2020-09-15Implement gvisor verity fs ioctl with GETFLAGSChong Cai
PiperOrigin-RevId: 331905347
2020-09-15Merge release-20200907.0-53-g8b15effd9 (automated)gVisor bot
2020-09-15Improve syserror_test.Jamie Liu
- It's very difficult to prevent returnErrnoAsError and returnError from being optimized out. Instead, replace BenchmarkReturn* with BenchmarkAssign*, which store to globalError. - Compare to a non-nil globalError in BenchmarkCompare* and BenchmarkSwitch*. New results: BenchmarkAssignErrno BenchmarkAssignErrno-12 1000000000 0.615 ns/op BenchmarkAssignError BenchmarkAssignError-12 1000000000 0.626 ns/op BenchmarkCompareErrno BenchmarkCompareErrno-12 1000000000 0.522 ns/op BenchmarkCompareError BenchmarkCompareError-12 1000000000 3.54 ns/op BenchmarkSwitchErrno BenchmarkSwitchErrno-12 1000000000 1.45 ns/op BenchmarkSwitchError BenchmarkSwitchError-12 536315757 10.9 ns/op PiperOrigin-RevId: 331875387
2020-09-15Merge release-20200907.0-52-g456c6c33e (automated)gVisor bot
2020-09-15Invert dependency between the context and amutex packages.Jamie Liu
This is to allow the syserror package to depend on the context package in a future change. PiperOrigin-RevId: 331866252
2020-09-15Merge release-20200907.0-51-ga004f0d08 (automated)gVisor bot
2020-09-15Support setting STATX_SIZE for kernfs.InodeAttrs.Dean Deng
Make setting STATX_SIZE a no-op, if it is valid for the given permissions and file type. Also update proc tests, which were overfitted before. Fixes #3842. Updates #1193. PiperOrigin-RevId: 331861087
2020-09-15Merge release-20200907.0-50-g72a30b114 (automated)gVisor bot
2020-09-15Move reusable IPv4 test code into a testutil module and refactor itArthur Sfez
The refactor aims to simplify the package, by replacing the Go channel with a PacketBuffer slice. This code will be reused by tests for IPv6 fragmentation. PiperOrigin-RevId: 331860411
2020-09-15Merge release-20200907.0-49-g7f89a26e1 (automated)gVisor bot
2020-09-15Merge release-20200907.0-48-g0d790cbae (automated)gVisor bot
2020-09-15Merge release-20200907.0-47-g86b31a807 (automated)gVisor bot
2020-09-15Release FDTable lock before dropping the fds.Nayana Bidari
This is needed for SO_LINGER, where close() is blocked for linger timeout and we are holding the FDTable lock for the entire timeout which will not allow us to create/delete other fds. We have to release the locks and then drop the fds. PiperOrigin-RevId: 331844185
2020-09-15Read vfs2 epoll events atomically.Jamie Liu
Discovered by ayushranjan@: VFS2 was employing the following algorithm for fetching ready events from an epoll instance: - Create a statically sized EpollEvent slice on the stack of size 16. - Pass that to EpollInstance.ReadEvents() to populate. - EpollInstance.ReadEvents() requeues level-triggered events that it returns back into the ready queue. - Write the results to usermem. - If the number of results were = 16 then recall EpollInstance.ReadEvents() in the hopes of getting more. But this will cause duplication of the "requeued" ready level-triggered events. So if the ready queue has >= 16 ready events, the EpollWait for loop will spin until it fills the usermem with `maxEvents` events. Fixes #3521 PiperOrigin-RevId: 331840527
2020-09-15RFC: design for a 9P replacementJamie Liu
Tentatively `lisafs` (LInux SAndbox FileSystem). PiperOrigin-RevId: 331839246
2020-09-15Merge release-20200907.0-46-g84d48c0fd (automated)gVisor bot
2020-09-15Merge pull request #3895 from btw616:fix/issue-3894gVisor bot
PiperOrigin-RevId: 331824411
2020-09-15Merge release-20200907.0-44-gd3880b76c (automated)gVisor bot
2020-09-15Don't conclude broadcast from route destinationGhanan Gowripalan
The routing table (in its current) form should not be used to make decisions about whether a remote address is a broadcast address or not (for IPv4). Note, a destination subnet does not always map to a network. E.g. RouterA may have a route to 192.168.0.0/22 through RouterB, but RouterB may be configured with 4x /24 subnets on 4 different interfaces. See https://github.com/google/gvisor/issues/3938. PiperOrigin-RevId: 331819868
2020-09-15Fix proc.(*fdDir).IterDirents for VFS2Tiwei Bie
Currently the returned offset is an index, and we can't use it to find the next fd to serialize, because getdents should iterate correctly despite mutation of fds. Instead, we can return the next fd to serialize plus 2 (which accounts for "." and "..") as the offset. Fixes: #3894 Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
2020-09-14Merge release-20200907.0-43-g52ffeb2d6 (automated)gVisor bot
2020-09-14Add note about gofer link(2) limitationFabricio Voznika
PiperOrigin-RevId: 331648296
2020-09-14Merge release-20200907.0-42-g2747030ec (automated)gVisor bot
2020-09-14Store multicast memberships in a setTamir Duberstein
This is simpler and more performant. PiperOrigin-RevId: 331639978
2020-09-14Merge release-20200907.0-41-g05d2ebee5 (automated)gVisor bot
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-14 22:00:00 +0000