summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2020-10-15Refactor compareFragments to follow Go styleArthur Sfez
Test helpers should be used for test setup/teardown, not actual testing. Use cmp.Diff instead of bytes.Equal to improve readability. PiperOrigin-RevId: 337323242
2020-10-14Find route before sending NA responseGhanan Gowripalan
This change also brings back the stack.Route.ResolveWith method so that we can immediately resolve a route when sending an NA in response to a a NS with a source link layer address option. Test: ipv6_test.TestNeighorSolicitationResponse PiperOrigin-RevId: 337185461
2020-10-14Fix SCM Rights reference leaks.Dean Deng
Control messages should be released on Read (which ignores the control message) or zero-byte Send. Otherwise, open fds sent through the control messages will be leaked. PiperOrigin-RevId: 337110774
2020-10-14Fix shm reference leak.Dean Deng
All shm segments in an IPC namespace should be released once that namespace is destroyed. Add reference counting to IPCNamespace so that once the last task with a reference on it exits, we can trigger a destructor that will clean up all shm segments that have not been explicitly freed by the application. PiperOrigin-RevId: 337032977
2020-10-13Various website fixesIan Lewis
- Formatting on the most recent blog post - Add a link to faq from containerd docs - Fix code in FAQ PiperOrigin-RevId: 337001738
2020-10-13Merge pull request #4482 from lemin9538:lemin_arm64gVisor bot
PiperOrigin-RevId: 336976081
2020-10-13Merge pull request #4486 from patr0nus:master_udp_ep_fixgVisor bot
PiperOrigin-RevId: 336974095
2020-10-13Merge pull request #4386 from lubinszARM:pr_testutil_tls_usrgVisor bot
PiperOrigin-RevId: 336970511
2020-10-13Merge pull request #4374 from lubinszARM:pr_ffmpeg_kvm_01gVisor bot
PiperOrigin-RevId: 336962937
2020-10-13Correct NA minimum sizeSam Balana
Remove the duplicate NA size variable while I'm here. See https://tools.ietf.org/html/rfc4861#section-4.4 for the packet format. PiperOrigin-RevId: 336943206
2020-10-13Don't read beyond EOF when inserting into sentry page cache.Jamie Liu
The sentry page cache stores file contents at page granularity; this is necessary for memory mappings. Thus file offset ranges passed to fsutil.FileRangeSet.Fill() must be page-aligned. If the read callback passed to Fill() returns (partial read, nil error) when reading up to EOF (which is the case for p9.ClientFile.ReadAt() since 9P's Rread cannot convey both a partial read and EOF), Fill() will re-invoke the read callback to try to read from EOF to the end of the containing page, which is harmless but needlessly expensive. Fix this by handling file size explicitly in fsutil.FileRangeSet.Fill(). PiperOrigin-RevId: 336934075
2020-10-13Use NDP option serializer instead of handcrafting the NSTamir Duberstein
Use the correct constant (Solicit, not Advert) while I'm here. PiperOrigin-RevId: 336924605
2020-10-13[vfs2] Don't take reference in Task.MountNamespaceVFS2 and MountNamespace.Root.Dean Deng
This fixes reference leaks related to accidentally forgetting to DecRef() after calling one or the other. PiperOrigin-RevId: 336918922
2020-10-13Avoid excessive Tgkill and wait operations.Adin Scannell
The required states may simply not be observed by the thread running bounce, so track guest and user generations to ensure that at least one of the desired state transitions happens. Fixes #3532 PiperOrigin-RevId: 336908216
2020-10-13[vfs2] Destroy all tmpfs files when the filesystem is released.Dean Deng
In addition to fixing reference leaks, this change also releases memory used by regular tmpfs files once the containing filesystem is released. PiperOrigin-RevId: 336833111
2020-10-13[vfs2] Add FilesystemType.Release to avoid reference leaks.Dean Deng
Singleton filesystem like devpts and devtmpfs have a single filesystem shared among all mounts, so they acquire a "self-reference" when initialized that must be released when the entire virtual filesystem is released at sandbox exit. PiperOrigin-RevId: 336828852
2020-10-13Don't leak VDSO mappings.Dean Deng
PiperOrigin-RevId: 336822021
2020-10-12gvisor/test: Set nogotsan for native testsAndrei Vagin
Tests are written in C++ and there is no reason to run them with gotsan without gVisor. PiperOrigin-RevId: 336783276
2020-10-12Change verity mu to be per file systemChong Cai
verity Mu should be per file system instead of global, so that enabling and verifying in different file systems won't block each other. Also Lock verity Mu in PRead. PiperOrigin-RevId: 336779356
2020-10-12Change Merkle tree library to use ReaderAtChong Cai
Merkle tree library was originally using Read/Seek to access data and tree, since the parameters are io.ReadSeeker. This could cause race conditions if multiple threads accesses the same fd to read. Here we change to use ReaderAt, and implement it with PRead to make it thread safe. PiperOrigin-RevId: 336779260
2020-10-12[vfs] kernfs: Fix inode memory leak issue.Ayush Ranjan
This change aims to fix the memory leak issue reported in #3933. Background: VFS2 kernfs kept accumulating invalid dentries if those dentries were not walked on. After substantial consideration of the problem by our team, we decided to have an LRU cache solution. This change is the first part to that solution, where we don't cache anything. The LRU cache can be added on top of this. What has changed: - Introduced the concept of an inode tree in kernfs.OrderedChildren. This is helpful is cases where the lifecycle of an inode is different from that of a dentry. - OrderedChildren now deals with initialized inodes instead of initialized dentries. It now implements Lookup() where it constructs a new dentry using the inode. - OrderedChildren holds a ref on all its children inodes. With this change, now an inode can "outlive" a dentry pointing to it. See comments in kernfs.OrderedChildren. - The kernfs dentry tree is solely maintained by kernfs only. Inode implementations can not modify the dentry tree. - Dentries that reach ref count 0 are removed from the dentry tree. - revalidateChildLocked now defer-DecRefs the newly created dentry from Inode.Lookup(), limiting its life to the current filesystem operation. If refs are picked on the dentry during the FS op (via an FD or something), then it will stick around and will be removed when the FD is closed. So there is essentially _no caching_ for Look()ed up dentries. - kernfs.DecRef does not have the precondition that fs.mu must be locked. Fixes #3933 PiperOrigin-RevId: 336768576
2020-10-12Merge pull request #4072 from adamliyi:droppt_fixgVisor bot
PiperOrigin-RevId: 336719900
2020-10-12[vfs2] Don't leak disconnected mounts.Dean Deng
PiperOrigin-RevId: 336694658
2020-10-11Assign ep.effectiveNetProtos in UDP forwarder's CreateEndpointpatr0nus
2020-10-10arm64: set DZE bit to make EL0 can use DC ZVAMin Le
Signed-off-by: Min Le <lemin.lm@antgroup.com>
2020-10-09TCP Receive window advertisement fixes.Bhasker Hariharan
The fix in commit 028e045da93b7c1c26417e80e4b4e388b86a713d was incorrect as it can cause the right edge of the window to shrink when we announce a zero window due to receive buffer being full as its done before the check for seeing if the window is being shrunk because of the selected window. Further the window was calculated purely on available space but in cases where we are getting full sized segments it makes more sense to use the actual bytes being held. This CL changes to use the lower of the total available space vs the available space in the maximal window we could advertise minus the actual payload bytes being held. This change also cleans up the code so that the window selection logic is not duplicated between getSendParams() and windowCrossedACKThresholdLocked. PiperOrigin-RevId: 336404827
2020-10-09RACK: Detect packet reordering.Nayana Bidari
RACK detects packet reordering by checking if the sender received ACK for the packet which has the sequence number less than the already acknowledged packets. PiperOrigin-RevId: 336397526
2020-10-09Include stat in Verity hashChong Cai
PiperOrigin-RevId: 336395445
2020-10-09Add gvisor webhook configurationKevin Krakauer
PiperOrigin-RevId: 336393190
2020-10-09platform/kvm: remove the unused fieldAndrei Vagin
PiperOrigin-RevId: 336366624
2020-10-09Add parsers golang benchmarks.Zach Koopmans
Add parser and formatting for golang benchmarks for docker benchmarks. Change adds a library for printing and parsing Test parameters and metrics. Benchmarks use the library to print parameters in the Benchmark title (e.g. the name field in b.Run()), and to report CustomMetrics. Parser uses the library to parse printed data from benchmark output and put it into BigQuery structs. PiperOrigin-RevId: 336365628
2020-10-09Merge pull request #4040 from lemin9538:lemin_arm64gVisor bot
PiperOrigin-RevId: 336362818
2020-10-09Reduce the cost of sysinfo(2).Jamie Liu
- sysinfo(2) does not actually require a fine-grained breakdown of memory usage. Accordingly, instead of calling pgalloc.MemoryFile.UpdateUsage() to update the sentry's fine-grained memory accounting snapshot, just use pgalloc.MemoryFile.TotalUsage() (which is a single fstat(), and therefore far cheaper). - Use the number of threads in the root PID namespace (i.e. globally) rather than in the task's PID namespace for consistency with Linux (which just reads global variable nr_threads), and add a new method to kernel.PIDNamespace to allow this to be read directly from an underlying map rather than requiring the allocation and population of an intermediate slice. PiperOrigin-RevId: 336353100
2020-10-09Set expect_failure flags on tests that currently fails on fuchsiaZeling Feng
PiperOrigin-RevId: 336350318
2020-10-09Minor nogo restructuring.Adin Scannell
PiperOrigin-RevId: 336343819
2020-10-09Infer receiver name for stateify.Adin Scannell
PiperOrigin-RevId: 336340035
2020-10-09Automated rollback of changelist 336304024Ghanan Gowripalan
PiperOrigin-RevId: 336339194
2020-10-09test/syscall/iptables: don't use designated initializersAndrei Vagin
test/syscalls/linux/iptables.cc:130:3: error: C99 designator 'name' outside aggregate initializer 130 | }; | PiperOrigin-RevId: 336331738
2020-10-09syscalls: Don't leak a file on the error pathAndrei Vagin
Reported-by: syzbot+bb82fb556d5d0a43f632@syzkaller.appspotmail.com PiperOrigin-RevId: 336324720
2020-10-09Automated rollback of changelist 336185457Bhasker Hariharan
PiperOrigin-RevId: 336304024
2020-10-08Only block resolution when NUD is incompleteGhanan Gowripalan
When a completed entry exists for a neighbor, there is no need to block while reachability is (re)confirmed. The stack should continue to use the neighbor's link address while NUD is performed. Test: stack_test.TestNeighborCacheReplace PiperOrigin-RevId: 336199043
2020-10-08Implement MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ.Jamie Liu
cf. 2a36ab717e8f "rseq/membarrier: Add MEMBARRIER_CMD_PRIVATE_EXPEDITED_RSEQ" PiperOrigin-RevId: 336186795
2020-10-08Do not resolve routes immediatelyGhanan Gowripalan
When a response needs to be sent to an incoming packet, the stack should consult its neighbour table to determine the remote address's link address. When an entry does not exist in the stack's neighbor table, the stack should queue the packet while link resolution completes. See comments. PiperOrigin-RevId: 336185457
2020-10-08Send unicast probes when link address is knownGhanan Gowripalan
When the neighbor table already has link address for a neighbor but is trying to confirm reachability, it may send unicast probes to the neighbor. PiperOrigin-RevId: 336166711
2020-10-08Minor nogo cleanup.Adin Scannell
PiperOrigin-RevId: 336126583
2020-10-08Improve multi-arch support.Adin Scannell
This change allows Dockerfiles named Dockerfile.$(ARCH) and makes list-images list only supported architectures. Updates #2847 PiperOrigin-RevId: 336108293
2020-10-08arm64: the mair_el1 value is wrongMin Le
the correct value needed is 0xbbff440c0400 but the const defined is 0x000000000000ffc0 due to the operator error in _MT_EL1_INIT, both kernel and user space memory attribute should be Normal memory not DEVICE_nGnRE Signed-off-by: Min Le <lemin.lm@antgroup.com>
2020-10-08Change IPv6 reassembly timeout to 60sArthur Sfez
It was originally set to 30s for IPv6 (same as IPv4) but this is not what RFC 8200 prescibes. Linux also defaults to 60s [1]. [1] https://github.com/torvalds/linux/blob/47ec5303d73ea344e84f46660fff693c57641386/include/net/ipv6.h#L456 PiperOrigin-RevId: 336034636
2020-10-07Add staticcheck and staticstyle analyzers.Adin Scannell
This change also adds support to go_stateify for detecting an appropriate receiver name, avoiding a large number of false positives. PiperOrigin-RevId: 335994587
2020-10-07Internal change.gVisor bot
PiperOrigin-RevId: 335960488
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-23 21:41:28 +0000