summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2018-08-22Always add AT_BASE even if there is no interpreter.Brian Geffon
Linux will ALWAYS add AT_BASE even for a static binary, expect it will be set to 0 [1]. 1. https://github.com/torvalds/linux/blob/master/fs/binfmt_elf.c#L253 PiperOrigin-RevId: 209811129 Change-Id: I92cc66532f23d40f24414a921c030bd3481e12a0
2018-08-22Fix typoFabricio Voznika
PiperOrigin-RevId: 209788842 Change-Id: I70ecb58009777ce8f642f246bc161af1a0bf2628
2018-08-22fs: Hold Dirent.mu when calling Dirent.flush().Nicolas Lacasse
As required by the contract in Dirent.flush(). Also inline Dirent.freeze() into Dirent.Freeze(), since it is only called from there. PiperOrigin-RevId: 209783626 Change-Id: Ie6de4533d93dd299ffa01dabfa257c9cc259b1f4
2018-08-22Mark postgres as not supportedFabricio Voznika
See https://github.com/google/gvisor/issues/88 PiperOrigin-RevId: 209780532 Change-Id: Iff8004474020511503a0a5cd2cdba2b512c327ef
2018-08-21Fix TestUnixDomainSockets failure when path is too largeFabricio Voznika
UDS has a lower size limit than regular files. When running under bazel this limit is exceeded. Test was changed to always mount /tmp and use it for the test. PiperOrigin-RevId: 209717830 Change-Id: I1dbe19fe2051ffdddbaa32b188a9167f446ed193
2018-08-21sentry: do not release gofer inode file state loading lock upon error.Zhaozhong Ni
When an inode file state failed to load asynchronuously, we want to report the error instead of potentially panicing in another async loading goroutine incorrectly unblocked. PiperOrigin-RevId: 209683977 Change-Id: I591cde97710bbe3cdc53717ee58f1d28bbda9261
2018-08-21binary: append slicesIan Gudger
A new optimization in Go 1.11 improves the efficiency of slice extension: "The compiler now optimizes slice extension of the form append(s, make([]T, n)...)." https://tip.golang.org/doc/go1.11#performance-compiler Before: BenchmarkMarshalUnmarshal-12 2000000 664 ns/op 0 B/op 0 allocs/op BenchmarkReadWrite-12 500000 2395 ns/op 304 B/op 24 allocs/op After: BenchmarkMarshalUnmarshal-12 2000000 628 ns/op 0 B/op 0 allocs/op BenchmarkReadWrite-12 500000 2411 ns/op 304 B/op 24 allocs/op BenchmarkMarshalUnmarshal benchmarks the code in this package, BenchmarkReadWrite benchmarks the code in the standard library. PiperOrigin-RevId: 209679979 Change-Id: I51c6302e53f60bf79f84576b1ead4d36658897cb
2018-08-21Temporarily skip multi-container tests in container_test until deflaked.Kevin Krakauer
PiperOrigin-RevId: 209679235 Change-Id: I527e779eeb113d0c162f5e27a2841b9486f0e39f
2018-08-21Expose route tableGoogler
PiperOrigin-RevId: 209670528 Change-Id: I2890bcdef36f0b5f24b372b42cf628b38dd5764e
2018-08-21nonExclusiveFS is causing timeout with --raceFabricio Voznika
Not sure why, just removed for now to unblock the tests. PiperOrigin-RevId: 209661403 Change-Id: I72785c071687d54e22bda9073d36b447d52a7018
2018-08-21Move container_test to the container packageFabricio Voznika
PiperOrigin-RevId: 209655274 Change-Id: Id381114bdb3197c73e14f74b3f6cf1afd87d60cb
2018-08-21Build PCAP file with atomic blocking writesIan Gudger
The previous use of non-blocking writes could result in corrupt PCAP files if a partial write occurs. Using (*os.File).Write solves this problem by not allowing partial writes. This change does not increase allocations (in one path it actually reduces them), but does add additional copying. PiperOrigin-RevId: 209652974 Change-Id: I4b1cf2eda4cfd7f237a4245aceb7391b3055a66c
2018-08-21Initial change for multi-gofer supportFabricio Voznika
PiperOrigin-RevId: 209647293 Change-Id: I980fca1257ea3fcce796388a049c353b0303a8a5
2018-08-21Fix races in kernel.(*Task).Value()Ian Gudger
PiperOrigin-RevId: 209627180 Change-Id: Idc84afd38003427e411df6e75abfabd9174174e1
2018-08-20Fix handling of abstract Unix socket addressesIan Gudger
* Don't truncate abstract addresses at second null. * Properly handle abstract addresses with length < 108 bytes. PiperOrigin-RevId: 209502703 Change-Id: I49053f2d18b5a78208c3f640c27dbbdaece4f1a9
2018-08-20getdents should return type=DT_DIR for SpecialDirectories.Nicolas Lacasse
It was returning DT_UNKNOWN, and this was breaking numpy. PiperOrigin-RevId: 209459351 Change-Id: Ic6f548e23aa9c551b2032b92636cb5f0df9ccbd4
2018-08-20Standardize mounts in testsFabricio Voznika
Tests get a readonly rootfs mapped to / (which was the case before) and writable TEST_TMPDIR. This makes it easier to setup containers to write to files and to share state between test and containers. PiperOrigin-RevId: 209453224 Change-Id: I4d988e45dc0909a0450a3bb882fe280cf9c24334
2018-08-20sysfs: Add (empty) cpu directories for each cpu in /sys/devices/system/cpu.Nicolas Lacasse
Numpy needs these. Also added the "present" directory, since the contents are the same as possible and online. PiperOrigin-RevId: 209451777 Change-Id: I2048de3f57bf1c57e9b5421d607ca89c2a173684
2018-08-17Add nonExclusiveFS dimension to more testsFabricio Voznika
The ones using 'kvm' actually mean that they don't want overlay. PiperOrigin-RevId: 209194318 Change-Id: I941a443cb6d783e2c80cf66eb8d8630bcacdb574
2018-08-16fs: Support possible and online knobs for cpuChenggang Qin
Some linux commands depend on /sys/devices/system/cpu/possible, such as 'lscpu'. Add 2 knobs for cpu: /sys/devices/system/cpu/possible /sys/devices/system/cpu/online Both the values are '0 - Kernel.ApplicationCores()-1'. Change-Id: Iabd8a4e559cbb630ed249686b92c22b4e7120663 PiperOrigin-RevId: 209070163
2018-08-16Internal change.Googler
PiperOrigin-RevId: 209060862 Change-Id: I2cd02f0032b80d0087110095548b1a8ffa696ac2
2018-08-16Combine functions to search for file under one common functionFabricio Voznika
Bazel adds the build type in front of directories making it hard to refer to binaries in code. PiperOrigin-RevId: 209010854 Change-Id: I6c9da1ac3bbe79766868a3b14222dd42d03b4ec5
2018-08-15Remove obsolete comment about panickingIan Gudger
PiperOrigin-RevId: 208908702 Change-Id: I6be9c765c257a9ddb1a965a03942ab3fc3a34a43
2018-08-15runsc fsgofer: Support dynamic serving of filesystems.Kevin Krakauer
When multiple containers run inside a sentry, each container has its own root filesystem and set of mounts. Containers are also added after sentry boot rather than all configured and known at boot time. The fsgofer needs to be able to serve the root filesystem of each container. Thus, it must be possible to add filesystems after the fsgofer has already started. This change: * Creates a URPC endpoint within the gofer process that listens for requests to serve new content. * Enables the sentry, when starting a new container, to add the new container's filesystem. * Mounts those new filesystems at separate roots within the sentry. PiperOrigin-RevId: 208903248 Change-Id: Ifa91ec9c8caf5f2f0a9eead83c4a57090ce92068
2018-08-15runsc: Fix instances of file access "proxy".Nicolas Lacasse
This file access type is actually called "proxy-shared", but I forgot to update all locations. PiperOrigin-RevId: 208832491 Change-Id: I7848bc4ec2478f86cf2de1dcd1bfb5264c6276de
2018-08-14Reduce map lookups in syserrIan Gudger
PiperOrigin-RevId: 208755352 Change-Id: Ia24630f452a4a42940ab73a8113a2fd5ea2cfca2
2018-08-14runsc: Change cache policy for root fs and volume mounts.Nicolas Lacasse
Previously, gofer filesystems were configured with the default "fscache" policy, which caches filesystem metadata and contents aggressively. While this setting is best for performance, it means that changes from inside the sandbox may not be immediately propagated outside the sandbox, and vice-versa. This CL changes volumes and the root fs configuration to use a new "remote-revalidate" cache policy which tries to retain as much caching as possible while still making fs changes visible across the sandbox boundary. This cache policy is enabled by default for the root filesystem. The default value for the "--file-access" flag is still "proxy", but the behavior is changed to use the new cache policy. A new value for the "--file-access" flag is added, called "proxy-exclusive", which turns on the previous aggressive caching behavior. As the name implies, this flag should be used when the sandbox has "exclusive" access to the filesystem. All volume mounts are configured to use the new cache policy, since it is safest and most likely to be correct. There is not currently a way to change this behavior, but it's possible to add such a mechanism in the future. The configurability is a smaller issue for volumes, since most of the expensive application fs operations (walking + stating files) will likely served by the root fs. PiperOrigin-RevId: 208735037 Change-Id: Ife048fab1948205f6665df8563434dbc6ca8cfc9
2018-08-14TTY: Fix data race where calls into tty.queue's waiter were not synchronized.Kevin Krakauer
Now, there's a waiter for each end (master and slave) of the TTY, and each waiter.Entry is only enqueued in one of the waiters. PiperOrigin-RevId: 208734483 Change-Id: I06996148f123075f8dd48cde5a553e2be74c6dce
2018-08-14Fix `ls -laR | wc -l` hanging.Kevin Krakauer
stat()-ing /proc/PID/fd/FD incremented but didn't decrement the refcount for FD. This behavior wasn't usually noticeable, but in the above case: - ls would never decrement the refcount of the write end of the pipe to 0. - This caused the write end of the pipe never to close. - wc would then hang read()-ing from the pipe. PiperOrigin-RevId: 208728817 Change-Id: I4fca1ba5ca24e4108915a1d30b41dc63da40604d
2018-08-14Enforce Unix socket address length limitIan Gudger
PiperOrigin-RevId: 208720936 Change-Id: Ic943a88b6efeff49574306d4d4e1f113116ae32e
2018-08-14Automated rollback of changelist 208284483Nicolas Lacasse
PiperOrigin-RevId: 208685417 Change-Id: Ie2849c4811e3a2d14a002f521cef018ded0c6c4a
2018-08-14Readme: Fix typo in link.Nicolas Lacasse
PiperOrigin-RevId: 208674853 Change-Id: I6db4c59fdca1e5603a4d9dc021f3c3d7eaad7c6f
2018-08-14Fix bind() on overlays.Nicolas Lacasse
InodeOperations.Bind now returns a Dirent which will be cached in the Dirent tree. When an overlay is in-use, Bind cannot return the Dirent created by the upper filesystem because the Dirent does not know about the overlay. Instead, overlayBind must create a new overlay-aware Inode and Dirent and return that. This is analagous to how Lookup and overlayLookup work. PiperOrigin-RevId: 208670710 Change-Id: I6390affbcf94c38656b4b458e248739b4853da29
2018-08-13Prevent renames across walk fast path.Adin Scannell
PiperOrigin-RevId: 208533436 Change-Id: Ifc1a4e2d6438a424650bee831c301b1ac0d670a3
2018-08-13Add path sanity checks.Adin Scannell
PiperOrigin-RevId: 208527333 Change-Id: I55291bc6b8bc6b88fdd75baf899a71854c39c1a7
2018-08-10fs: Allow overlays to revalidate files from the upper fs.Nicolas Lacasse
Previously, an overlay would panic if either the upper or lower fs required revalidation for a given Dirent. Now, we allow revalidation from the upper file, but not the lower. If a cached overlay inode does need revalidation (because the upper needs revalidation), then the entire overlay Inode will be discarded and a new overlay Inode will be built with a fresh copy of the upper file. As a side effect of this change, Revalidate must take an Inode instead of a Dirent, since an overlay needs to revalidate individual Inodes. PiperOrigin-RevId: 208293638 Change-Id: Ic8f8d1ffdc09114721745661a09522b54420c5f1
2018-08-10Implemented the splice(2) syscall.Justine Olshan
Currently the implementation matches the behavior of moving data between two file descriptors. However, it does not implement this through zero-copy movement. Thus, this code is a starting point to build the more complex implementation. PiperOrigin-RevId: 208284483 Change-Id: Ibde79520a3d50bc26aead7ad4f128d2be31db14e
2018-08-10Move checkpoint/restore readme to g3doc directory.Nicolas Lacasse
PiperOrigin-RevId: 208282383 Change-Id: Ifa4aaf5d925b17d9a0672ea951a4570d35855300
2018-08-10cache policy: Check policy before returning a negative dirent.Nicolas Lacasse
The cache policy determines whether Lookup should return a negative dirent, or just ENOENT. This CL fixes one spot where we returned a negative dirent without first consulting the policy. PiperOrigin-RevId: 208280230 Change-Id: I8f963bbdb45a95a74ad0ecc1eef47eff2092d3a4
2018-08-10Added a reference to the checkpoint/restore readme.Justine Olshan
In the main readme, checkpoint and restore is listed as an advanced feature, and a link to its readme is provided. PiperOrigin-RevId: 208279833 Change-Id: Ib3db28a8df8ec93cf8d98d5dfd2ee2f75a61e664
2018-08-10README for Checkpoint/Restore.Brielle Broder
PiperOrigin-RevId: 208274833 Change-Id: Iddda875a87205f7b8fa6f5c60b547522b94a6696
2018-08-10Enable checkpoint/restore in cases of UDS use.Brielle Broder
Previously, processes which used file-system Unix Domain Sockets could not be checkpoint-ed in runsc because the sockets were saved with their inode numbers which do not necessarily remain the same upon restore. Now, the sockets are also saved with their paths so that the new inodes can be determined for the sockets based on these paths after restoring. Tests for cases with UDS use are included. Test cleanup to come. PiperOrigin-RevId: 208268781 Change-Id: Ieaa5d5d9a64914ca105cae199fd8492710b1d7ec
2018-08-10Validate FS.base before establishing it in the task's register set.Neel Natu
PiperOrigin-RevId: 208229341 Change-Id: I5d84bc52bbafa073446ef497e56958d0d7955aa8
2018-08-09Fix runsc integration_test when using --network=hostFabricio Voznika
inethost doesn't support netlink and 'ifconfig' call to retrieve IP address fails. Look up IP address in /etc/hosts instead. PiperOrigin-RevId: 208135641 Change-Id: I3c2ce15db6fc7c3306a45e4bfb9cc5d4423ffad3
2018-08-09Fix missing O_LARGEFILE from O_CREAT filesMichael Pratt
Cleanup some more syscall.O_* references while we're here. PiperOrigin-RevId: 208133460 Change-Id: I48db71a38f817e4f4673977eafcc0e3874eb9a25
2018-08-08Basic support for ip link/addr and ifconfigFabricio Voznika
Closes #94 PiperOrigin-RevId: 207997580 Change-Id: I19b426f1586b5ec12f8b0cd5884d5b401d334924
2018-08-08Fix error handling for bad message sizes.Adin Scannell
The message size check is legitimate: the size must be negotiated, which relies on the fixed message limit up front. Sending a message larger than that indicates that the connection is out of sync and is considered a socket error (disconnect). Similarly, sending a size that is too small indicates that the stream is out-of-sync or invalid. PiperOrigin-RevId: 207996551 Change-Id: Icd8b513d5307e9d5953dbb957ee70ceea111098d
2018-08-08Resend packets back to netstack if destined to itselfFabricio Voznika
Add option to redirect packet back to netstack if it's destined to itself. This fixes the problem where connecting to the local NIC address would not work, e.g.: echo bar | nc -l -p 8080 & echo foo | nc 192.168.0.2 8080 PiperOrigin-RevId: 207995083 Change-Id: I17adc2a04df48bfea711011a5df206326a1fb8ef
2018-08-08Protect PCIDs with a mutex.Adin Scannell
Because the Drop method may be called across vCPUs, it is necessary to protect the PCID database with a mutex to prevent concurrent modification. The PCID is assigned prior to entersyscall, so it's safe to block. PiperOrigin-RevId: 207992864 Change-Id: I8b36d55106981f51e30dcf03e12886330bb79d67
2018-08-08Fix data race in unix.BoundEndpoint.UnidirectionalConnect.Ian Gudger
Data race is: Read: (*connectionlessEndpoint).UnidirectionalConnect: writeQueue: e.receiver.(*queueReceiver).readQueue, Write: (*connectionlessEndpoint).Close: e.receiver = nil The problem is that (*connectionlessEndpoint).UnidirectionalConnect assumed that baseEndpoint.receiver is immutable which is explicitly not the case. Fixing this required two changes: 1. Add synchronization around access of baseEndpoint.receiver in (*connectionlessEndpoint).UnidirectionalConnect. 2. Check for baseEndpoint.receiver being nil in (*connectionlessEndpoint).UnidirectionalConnect. PiperOrigin-RevId: 207984402 Change-Id: Icddeeb43805e777fa3ef874329fa704891d14181
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-02 04:26:23 +0000