summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2020-09-11Make nogo more robust to variety of stdlib layouts.Michael Pratt
PiperOrigin-RevId: 331206424
2020-09-11Implement copy-up-coherent mmap for VFS2 overlayfs.Jamie Liu
This is very similar to copy-up-coherent mmap in the VFS1 overlay, with the minor wrinkle that there is no fs.InodeOperations.Mappable(). Updates #1199 PiperOrigin-RevId: 331206314
2020-09-11Fix host unix socket to not swallow EOF incorrectly.Bhasker Hariharan
Fixes an error where in case of a receive buffer larger than the host send buffer size for a host backed unix dgram socket we would end up swallowing EOF from recvmsg syscall causing the read() to block forever. PiperOrigin-RevId: 331192810
2020-09-11Clean up image constructionTamir Duberstein
- Skip `docker inspect`; `docker pull` is idempotent - Remove unnecessary CMD directives in Dockerfiles - Run bazel before building images to catch errors sooner PiperOrigin-RevId: 331107815
2020-09-10[vfs] Disable inode number equality check for overlayfs.Ayush Ranjan
Overlayfs does not persist a directory's inode number even while it is mounted. See fs/overlayfs/inode.c:ovl_map_dev_ino(). VFS2 generates a new inode number for directories everytime in lookup. PiperOrigin-RevId: 331045037
2020-09-10[vfs] Add vfs2 runtime tests.Ayush Ranjan
PiperOrigin-RevId: 330981912
2020-09-10Merge pull request #3892 from lubinszARM:pr_n1_02gVisor bot
PiperOrigin-RevId: 330973856
2020-09-10[vfs] Disable nlink tests for overlayfs.Ayush Ranjan
Overlayfs intentionally does not compute nlink for directories (because it can be really expensive). Linux returns 1, VFS2 returns 2 and VFS1 actually calculates the correct value. PiperOrigin-RevId: 330967139
2020-09-10Fix typo, remove duplicate word.gVisor bot
PiperOrigin-RevId: 330898705
2020-09-10arm64:place an SB sequence following an ERET instructionBin Lu
Some CPUs(eg: ampere-emag) can speculate past an ERET instruction and potentially perform speculative accesses to memory before processing the exception return. Since the register state is often controlled by a lower privilege level at the point of an ERET, this could potentially be used as part of a side-channel attack. Signed-off-by: Bin Lu <bin.lu@arm.com>
2020-09-09Add note about kubeadm to the FAQIan Lewis
Fixes #3277 PiperOrigin-RevId: 330853338
2020-09-09Unlock VFS.mountMu before FilesystemImpl calls for ↵Jamie Liu
/proc/[pid]/{mounts,mountinfo}. Also move VFS.MakeSyntheticMountpoint() (which is a utility wrapper around VFS.MkdirAllAt(), itself a utility wrapper around VFS.MkdirAt()) to not be in the middle of the implementation of these proc files. Fixes #3878 PiperOrigin-RevId: 330843106
2020-09-09Don't write VFS2 gofer client timestamps back on dentry destruction.Jamie Liu
This feature is too expensive for runsc, even with setattrclunk, because fsgofer.localFile.SetAttr() ends up needing to call reopenProcFD(), incurring two string allocations for the FD pathname, an fd.FD allocation, and two calls to runtime.SetFinalizer() when the fd.FD is created and closed respectively (b/133767962) (plus the actual cost of the syscalls, which is negligible). PiperOrigin-RevId: 330843012
2020-09-09Merge pull request #3886 from avagin:github-act-featuregVisor bot
PiperOrigin-RevId: 330841374
2020-09-09github: Don't build the Go branch for feature branchesAndrei Vagin
We can't actually push the Go branch on pushes to feature branches. Signed-off-by: Andrei Vagin <avagin@google.com>
2020-09-09Merge pull request #3880 from avagin:github-act-featuregVisor bot
PiperOrigin-RevId: 330802067
2020-09-09Don't sched_setaffinity in ptrace platform.Jamie Liu
PiperOrigin-RevId: 330777900
2020-09-09github: run actions for feature branchesAndrei Vagin
Signed-off-by: Andrei Vagin <avagin@google.com>
2020-09-09Fix formatting for Kubernetes tutorialIan Lewis
PiperOrigin-RevId: 330745430
2020-09-09Add syntax highlighting to websiteIan Lewis
Adds a syntax highlighting theme css so that code snippets are highlighted properly. PiperOrigin-RevId: 330733737
2020-09-08Add a Docker Compose tutorialIan Lewis
Adds a Docker Compose tutorial to the website that shows how to start a Wordpress site and includes information about how to get DNS working. Fixes #115 PiperOrigin-RevId: 330652842
2020-09-08Implement synthetic mountpoints for kernfs.Jamie Liu
PiperOrigin-RevId: 330629897
2020-09-08[vfs] overlayfs: Fix socket tests.Ayush Ranjan
- BindSocketThenOpen test was expecting the incorrect error when opening a socket. Fixed that. - VirtualFilesystem.BindEndpointAt should not require pop.Path.Begin.Ok() because the filesystem implementations do not need to walk to the parent dentry. This check also exists for MknodAt, MkdirAt, RmdirAt, SymlinkAt and UnlinkAt but those filesystem implementations also need to walk to the parent denty. So that check is valid. Added some syscall tests to test this. PiperOrigin-RevId: 330625220
2020-09-08Add check for both child and childMerkle ENOENTgVisor bot
The check in verity walk returns error for non ENOENT cases, and all ENOENT results should be checked. This case was missing. PiperOrigin-RevId: 330604771
2020-09-08Implement ioctl with enable veritygVisor bot
ioctl with FS_IOC_ENABLE_VERITY is added to verity file system to enable a file as verity file. For a file, a Merkle tree is built with its data. For a directory, a Merkle tree is built with the root hashes of its children. PiperOrigin-RevId: 330604368
2020-09-08[vfs] overlayfs: decref VD when not using it.Ayush Ranjan
overlay/filesystem.go:lookupLocked() did not DecRef the VD on some error paths when it would not end up saving or using the VD. PiperOrigin-RevId: 330589742
2020-09-08Honor readonly flag for root mountFabricio Voznika
Updates #1487 PiperOrigin-RevId: 330580699
2020-09-08Increase resolution timeout for TestCacheResolutionSam Balana
Fixes pkg/tcpip/stack:stack_test flake experienced while running TestCacheResolution with gotsan. This occurs when the test-runner takes longer than the resolution timeout to call linkAddrCache.get. In this test we don't care about the resolution timeout, so set it to the maximum and rely on test-runner timeouts to avoid deadlocks. PiperOrigin-RevId: 330566250
2020-09-08Merge pull request #3856 from btw616:fix/issue-3855gVisor bot
PiperOrigin-RevId: 330565414
2020-09-08Fix data race in tcp.GetSockOpt.Bhasker Hariharan
e.ID can't be read without holding e.mu. GetSockOpt was reading e.ID when looking up OriginalDst without holding e.mu. PiperOrigin-RevId: 330562293
2020-09-08Improve type safety for transport protocol optionsGhanan Gowripalan
The existing implementation for TransportProtocol.{Set}Option take arguments of an empty interface type which all types (implicitly) implement; any type may be passed to the functions. This change introduces marker interfaces for transport protocol options that may be set or queried which transport protocol option types implement to ensure that invalid types are caught at compile time. Different interfaces are used to allow the compiler to enforce read-only or set-only socket options. RELNOTES: n/a PiperOrigin-RevId: 330559811
2020-09-08[vfs] Capitalize x in the {Get/Set/Remove/List}xattr functions.Ayush Ranjan
PiperOrigin-RevId: 330554450
2020-09-08Fix the use after nil check on args.MountNamespaceVFS2Tiwei Bie
The args.MountNamespaceVFS2 is used again after the nil check, instead, mntnsVFS2 which holds the expected reference should be used. This patch fixes this issue. Fixes: #3855 Signed-off-by: Tiwei Bie <tiwei.btw@antgroup.com>
2020-09-07Fix make_apt script.Ayush Ranjan
This change makes the following fixes: - When creating a test repo.key, create a secret keyring as other workflows also use secret keyrings only. - We should not be using both --keyring and --secret-keyring options. Just use --secret-keyring. - Pass homedir to all gpg commands. dpkg-sig takes an arg -g which stands for gpgopts. So we need to pass the homedir there too. PiperOrigin-RevId: 330443280
2020-09-04Simplify FD handling for container start/execFabricio Voznika
VFS1 and VFS2 host FDs have different dupping behavior, making error prone to code for both. Change the contract so that FDs are released as they are used, so the caller can simple defer a block that closes all remaining files. This also addresses handling of partial failures. With this fix, more VFS2 tests can be enabled. Updates #1487 PiperOrigin-RevId: 330112266
2020-09-03Adjust input file offset when sendfile only completes a partial write.Dean Deng
Fixes #3779. PiperOrigin-RevId: 330057268
2020-09-03Fix the release workflow.Ayush Ranjan
PiperOrigin-RevId: 330049242
2020-09-03Use fine-grained mutex for stack.cleanupEndpoints.Bhasker Hariharan
stack.cleanupEndpoints is protected by the stack.mu but that can cause contention as the stack mutex is already acquired in a lot of hot paths during new endpoint creation /cleanup etc. Moving this to a fine grained mutex should reduce contention on the stack.mu. PiperOrigin-RevId: 330026151
2020-09-03Use atomic.Value for Stack.tcpProbeFunc.Jamie Liu
b/166980357#comment56 shows: - 837 goroutines blocked in: gvisor/pkg/sync/sync.(*RWMutex).Lock gvisor/pkg/tcpip/stack/stack.(*Stack).StartTransportEndpointCleanup gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).cleanupLocked gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).completeWorkerLocked gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).protocolMainLoop.func1 gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).protocolMainLoop - 695 goroutines blocked in: gvisor/pkg/sync/sync.(*RWMutex).Lock gvisor/pkg/tcpip/stack/stack.(*Stack).CompleteTransportEndpointCleanup gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).cleanupLocked gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).completeWorkerLocked gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).protocolMainLoop.func1 gvisor/pkg/tcpip/transport/tcp/tcp.(*endpoint).protocolMainLoop - 3882 goroutines blocked in: gvisor/pkg/sync/sync.(*RWMutex).Lock gvisor/pkg/tcpip/stack/stack.(*Stack).GetTCPProbe gvisor/pkg/tcpip/transport/tcp/tcp.newEndpoint gvisor/pkg/tcpip/transport/tcp/tcp.(*protocol).NewEndpoint gvisor/pkg/tcpip/stack/stack.(*Stack).NewEndpoint All of these are contending on Stack.mu. Stack.StartTransportEndpointCleanup() and Stack.CompleteTransportEndpointCleanup() insert/delete TransportEndpoints in a map (Stack.cleanupEndpoints), and the former also does endpoint unregistration while holding Stack.mu, so it's not immediately clear how feasible it is to replace the map with a mutex-less implementation or how much doing so would help. However, Stack.GetTCPProbe() just reads a function object (Stack.tcpProbeFunc) that is almost always nil (as far as I can tell, Stack.AddTCPProbe() is only called in tests), and it's called for every new TCP endpoint. So converting it to an atomic.Value should significantly reduce contention on Stack.mu, improving TCP endpoint creation latency and allowing TCP endpoint cleanup to proceed. PiperOrigin-RevId: 330004140
2020-09-03Run gentdents_benchmark with fewer files.Nicolas Lacasse
This test regularly times out when "shared" filesystem is enabled. PiperOrigin-RevId: 329950622
2020-09-03Avoid grpc_implTamir Duberstein
PiperOrigin-RevId: 329902747
2020-09-02Update version in cni tutorialIan Lewis
Update the cniVersion used in the CNI tutorial so that it works with containerd 1.2. Containerd 1.2 includes a version of the cri plugin (release/1.2) that, in turn, includes a version of the cni library (0.6.0) that only supports up to 0.3.1. https://github.com/containernetworking/cni/blob/v0.6.0/pkg/version/version.go#L38 PiperOrigin-RevId: 329837188
2020-09-02Add support to run packetimpact tests against FuchsiaZeling Feng
blaze test <test_name>_fuchsia_test will run the corresponding packetimpact test against fuchsia. PiperOrigin-RevId: 329835290
2020-09-02Fix Accept to not return error for sockets in accept queue.Bhasker Hariharan
Accept on gVisor will return an error if a socket in the accept queue was closed before Accept() was called. Linux will return the new fd even if the returned socket is already closed by the peer say due to a RST being sent by the peer. This seems to be intentional in linux more details on the github issue. Fixes #3780 PiperOrigin-RevId: 329828404
2020-09-02[vfs] Implement xattr for overlayfs.Ayush Ranjan
PiperOrigin-RevId: 329825497
2020-09-02[vfs] Fix error handling in overlayfs OpenAt.Ayush Ranjan
Updates #1199 PiperOrigin-RevId: 329802274
2020-09-02Update Go version constraint on sync/spin_unsafe.go.Jamie Liu
PiperOrigin-RevId: 329801584
2020-09-02Improve sync.SeqCount performance.Jamie Liu
- Make sync.SeqCountEpoch not a struct. This allows sync.SeqCount.BeginRead() to be inlined. - Mark sync.SeqAtomicLoad<T> nosplit to mitigate the Go compiler's refusal to inline it. (Best I could get was "cost 92 exceeds budget 80".) - Use runtime-guided spinning in SeqCount.BeginRead(). Benchmarks: name old time/op new time/op delta pkg:pkg/sync/sync goos:linux goarch:amd64 SeqCountWriteUncontended-12 8.24ns ± 0% 11.40ns ± 0% +38.35% (p=0.000 n=10+10) SeqCountReadUncontended-12 0.33ns ± 0% 0.14ns ± 3% -57.77% (p=0.000 n=7+8) pkg:pkg/sync/seqatomictest/seqatomic goos:linux goarch:amd64 SeqAtomicLoadIntUncontended-12 0.64ns ± 1% 0.41ns ± 1% -36.40% (p=0.000 n=10+8) SeqAtomicTryLoadIntUncontended-12 0.18ns ± 4% 0.18ns ± 1% ~ (p=0.206 n=10+8) AtomicValueLoadIntUncontended-12 0.27ns ± 3% 0.27ns ± 0% -1.77% (p=0.000 n=10+8) (atomic.Value.Load is, of course, inlined. We would expect an uncontended inline SeqAtomicLoad<int> to perform identically to SeqAtomicTryLoad<int>.) The "regression" in BenchmarkSeqCountWriteUncontended, despite this CL changing nothing in that path, is attributed to microarchitectural subtlety; the benchmark loop is unchanged except for its address: Before this CL: :0 0x4e62d1 48ffc2 INCQ DX :0 0x4e62d4 48399110010000 CMPQ DX, 0x110(CX) :0 0x4e62db 7e26 JLE 0x4e6303 :0 0x4e62dd 90 NOPL :0 0x4e62de bb01000000 MOVL $0x1, BX :0 0x4e62e3 f00fc118 LOCK XADDL BX, 0(AX) :0 0x4e62e7 ffc3 INCL BX :0 0x4e62e9 0fbae300 BTL $0x0, BX :0 0x4e62ed 733a JAE 0x4e6329 :0 0x4e62ef 90 NOPL :0 0x4e62f0 bb01000000 MOVL $0x1, BX :0 0x4e62f5 f00fc118 LOCK XADDL BX, 0(AX) :0 0x4e62f9 ffc3 INCL BX :0 0x4e62fb 0fbae300 BTL $0x0, BX :0 0x4e62ff 73d0 JAE 0x4e62d1 After this CL: :0 0x4e6361 48ffc2 INCQ DX :0 0x4e6364 48399110010000 CMPQ DX, 0x110(CX) :0 0x4e636b 7e26 JLE 0x4e6393 :0 0x4e636d 90 NOPL :0 0x4e636e bb01000000 MOVL $0x1, BX :0 0x4e6373 f00fc118 LOCK XADDL BX, 0(AX) :0 0x4e6377 ffc3 INCL BX :0 0x4e6379 0fbae300 BTL $0x0, BX :0 0x4e637d 733a JAE 0x4e63b9 :0 0x4e637f 90 NOPL :0 0x4e6380 bb01000000 MOVL $0x1, BX :0 0x4e6385 f00fc118 LOCK XADDL BX, 0(AX) :0 0x4e6389 ffc3 INCL BX :0 0x4e638b 0fbae300 BTL $0x0, BX :0 0x4e638f 73d0 JAE 0x4e6361 PiperOrigin-RevId: 329754148
2020-09-02Add Docs to nginx benchmark.Zach Koopmans
Adds docs to nginx and refactors both Httpd and Nginx benchmarks. Key changes: - Add docs and make nginx tests the same as httpd (reverse, all docs, etc.). - Make requests scale on c * b.N -> a request per thread. This works well with both --test.benchtime=10m (do a run that lasts at least 10m) and --test.benchtime=10x (do b.N = 10). -- Remove a doc from both tests (1000Kb) as 1024Kb exists. PiperOrigin-RevId: 329751091
2020-09-02[runtime tests] Exclude flaky nodejs testAyush Ranjan
PiperOrigin-RevId: 329749191
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-27 22:49:15 +0000