Age | Commit message (Collapse) | Author |
|
Add more comments and more handling for exceptions.
Signed-off-by: Robin Luk <lubin.lu@antgroup.com>
|
|
Fix a panic when two entries in Failed state are removed at the same time.
PiperOrigin-RevId: 344143777
|
|
Because the code handles a bad header as "payload" right up to the last moment
we need to make sure payload handling does not remove the error information.
Fixes #4909
PiperOrigin-RevId: 344141690
|
|
Add a NIC-specific neighbor table statistic so we can determine how many
packets have been queued to Failed neighbors, indicating an unhealthy local
network. This change assists us to debug in-field issues where subsequent
traffic to a neighbor fails.
Fixes #4819
PiperOrigin-RevId: 344131119
|
|
1. setsockopt(SO_RCVTIMEO, 0) == never timeout
2. float64(time.Microsecond/time.Second) == 0
3. packetimpact tests use a lot of 1s timeouts
This becomes a more significant problem because of a recent change that binds
the sniffer only on the specific testNet interface so now the traffic on the
ctrlNet cannot wake up the blocking call anymore.
PiperOrigin-RevId: 344123465
|
|
The IGMPv2 core state machine can be shared with MLDv1 since they are
almost identical, ignoring specific addresses, constants and packets.
Bug #4682, #4861
PiperOrigin-RevId: 344102615
|
|
The bug has been fixed.
PiperOrigin-RevId: 344088206
|
|
PiperOrigin-RevId: 344009602
|
|
Bug #4682
PiperOrigin-RevId: 343993297
|
|
Summary of the approach: the test runner will set up a few DUTs according to
a flag and pass all the test networks to the testbench. The testbench will only
reside in a single container. The testbench will put all the test networks into
a buffered channel which served as a semaphore and now the user can freely use
t.Parallel() in (sub)tests and the true parallelism will be determined by how
many DUTs are configured. Creating DUTs on demand is not supported yet, the
test author should determine the number of DUTs to be used statically.
Specifically in this change:
- Don't export any global variables about the test network in testbench.
- Sniffer only binds on the local interface because it will be possible to have
multiple interfaces to multiple DUTs in a single testbench container.
- Migrate existing tests to stop using global variables.
PiperOrigin-RevId: 343965962
|
|
PiperOrigin-RevId: 343959348
|
|
PiperOrigin-RevId: 343946859
|
|
This change also simplifies and documents the build_cmd pipeline, and
reduces general noise for debugging Makefile issues.
It also drops the mapping for /etc/docker/daemon.json, which if it
does not exist initially will create this as a directory (causing lots
of confusion and breaks).
PiperOrigin-RevId: 343932456
|
|
This function does not exist in Go 1.13. We need to add an adaptor
to build against Go 1.13, which is the default Ubuntu version.
PiperOrigin-RevId: 343929132
|
|
PiperOrigin-RevId: 343927315
|
|
This test fails because it must include additional UIDs. Omit
the bazel sandbox to ensure that it can function correctly.
PiperOrigin-RevId: 343927190
|
|
Not all files are always accessible by the process itself. This
was specifically seen with map_files, but there's no rule that
every entry must be accessible by the process itself.
PiperOrigin-RevId: 343919117
|
|
PiperOrigin-RevId: 343885770
|
|
1. Add getD/getDentry methods to avoid long casting line in each test
2. Factor all calls to vfs.OpenAt/UnlinkAt/RenameAt on lower filesystem
to their own method (for both lower file and lower Merkle file) so
the tests are more readable
3. Add descriptive test names for delete/remove tests
PiperOrigin-RevId: 343540202
|
|
PiperOrigin-RevId: 343419851
|
|
Added headers, stats, checksum parsing capabilities from RFC 2236 describing
IGMPv2.
IGMPv2 state machine is implemented for each condition, sending and receiving
IGMP Membership Reports and Leave Group messages with backwards compatibility
with IGMPv1 routers.
Test:
* Implemented igmp header parser and checksum calculator in header/igmp_test.go
* ipv4/igmp_test.go tests incoming and outgoing IGMP messages and pathways.
* Added unit test coverage for IGMPv2 RFC behavior + IGMPv1 backwards
compatibility in ipv4/igmp_test.go.
Fixes #4682
PiperOrigin-RevId: 343408809
|
|
PiperOrigin-RevId: 343398191
|
|
This also makes the formatting nicer; the caller will add ":\n" to the end of
the message.
PiperOrigin-RevId: 343397099
|
|
Preparing for upcoming CLs that add MLD functionality.
Bug #4861
Test: header.TestMLD
PiperOrigin-RevId: 343391556
|
|
Found by a Fuzzer.
Reported-by: syzbot+619fa10be366d553ef7f@syzkaller.appspotmail.com
PiperOrigin-RevId: 343379575
|
|
Closes #4022
PiperOrigin-RevId: 343378647
|
|
We would like to track locks ordering to detect ordering violations. Detecting
violations is much simpler if mutexes must be unlocked by the same goroutine
that locked them.
Thus, as a first step to tracking lock ordering, add this lock/unlock
requirement to gVisor's sync.Mutex. This is more strict than the Go standard
library's sync.Mutex, but initial testing indicates only a single lock that is
used across goroutines. The new sync.CrossGoroutineMutex relaxes the
requirement (but will not provide lock order checking).
Due to the additional overhead, enforcement is only enabled with the
"checklocks" build tag. Build with this tag using:
bazel build --define=gotags=checklocks ...
From my spot-checking, this has no changed inlining properties when disabled.
Updates #4804
PiperOrigin-RevId: 343370200
|
|
Group addressable endpoints can simply check if it has joined the
multicast group without maintaining address endpoints. This also
helps remove the dependency on AddressableEndpoint from
GroupAddressableEndpoint.
Now that group addresses are not tracked with address endpoints, we can
avoid accidentally obtaining a route with a multicast local address.
PiperOrigin-RevId: 343336912
|
|
Migration to unified socket options left this behind.
PiperOrigin-RevId: 343305434
|
|
PiperOrigin-RevId: 343299993
|
|
If a kernfs user does not cache dentries, then cacheLocked will destroy the
dentry. The current DecRef implementation will be racy in this case as the
following can happen:
- Goroutine 1 calls DecRef and decreases ref count from 1 to 0.
- Goroutine 2 acquires d.fs.mu for reading and calls IncRef and increasing the
ref count from 0 to 1.
- Goroutine 2 releases d.fs.mu and calls DecRef again decreasing ref count from
1 to 0.
- Goroutine 1 now acquires d.fs.mu and calls cacheLocked which destroys the
dentry.
- Goroutine 2 now acquires d.fs.mu and calls cacheLocked to find that the dentry
is already destroyed!
Earlier we would panic in this case, we could instead just return instead of
adding complexity to handle this race. This is similar to what the gofer client
does.
We do not want to lock d.fs.mu in the case that the filesystem caches dentries
(common case as procfs and sysfs do this) to prevent congestion due to lock
contention.
PiperOrigin-RevId: 343229496
|
|
PiperOrigin-RevId: 343217712
|
|
PiperOrigin-RevId: 343211553
|
|
We have seen a case when a memory cgroup exists but a perf_event one doesn't.
Reported-by: syzbot+f31468b61d1a27e629dc@syzkaller.appspotmail.com
Reported-by: syzbot+1f163ec0321768f1497e@syzkaller.appspotmail.com
PiperOrigin-RevId: 343200070
|
|
PiperOrigin-RevId: 343196927
|
|
Container is not thread-safe, locking must be done in the caller.
The test was calling Container.Wait() from multiple threads with
no synchronization.
Also removed Container.WaitPID from test because the process might
have already existed when wait is called.
PiperOrigin-RevId: 343176280
|
|
This changes also introduces:
- `SocketOptionsHandler` interface which can be implemented by endpoints to
handle endpoint specific behavior on SetSockOpt. This is analogous to what
Linux does.
- `DefaultSocketOptionsHandler` which is a default implementation of the above.
This is embedded in all endpoints so that we don't have to uselessly
implement empty functions. Endpoints with specific behavior can override the
embedded method by manually defining its own implementation.
PiperOrigin-RevId: 343158301
|
|
PiperOrigin-RevId: 343152780
|
|
PiperOrigin-RevId: 343146856
|
|
PiperOrigin-RevId: 343144023
|
|
Packets should be properly routed when sending packets to addresses
in the loopback subnet which are not explicitly assigned to the loopback
interface.
Tests:
- integration_test.TestLoopbackAcceptAllInSubnetUDP
- integration_test.TestLoopbackAcceptAllInSubnetTCP
PiperOrigin-RevId: 343135643
|
|
PiperOrigin-RevId: 343130667
|
|
PiperOrigin-RevId: 343123278
|
|
This change also makes the following fixes:
- Make SocketOptions use atomic operations instead of having to acquire/drop
locks upon each get/set option.
- Make documentation more consistent.
- Remove tcpip.SocketOptions from socketOpsCommon because it already exists
in transport.Endpoint.
- Refactors get/set socket options tests to be easily extendable.
PiperOrigin-RevId: 343103780
|
|
PiperOrigin-RevId: 343096420
|
|
Redefine stack.WritePacket into stack.WritePacketToRemote which lets the NIC
decide whether to append link headers.
PiperOrigin-RevId: 343071742
|
|
This was added by mistake in cl/342868552.
PiperOrigin-RevId: 343021431
|
|
If the endpoint is in StateError but e.hardErrorLocked() returns
nil then return ErrClosedForRecieve.
This can happen if a concurrent write on the same endpoint was in progress
when the endpoint transitioned to an error state.
PiperOrigin-RevId: 343018257
|
|
PiperOrigin-RevId: 343000335
|
|
PiperOrigin-RevId: 342992936
|