Age | Commit message (Collapse) | Author |
|
This patch holds taskset.mu when getting tty. If we don't
do this, it may cause a "unlock of unlocked mutex" problem,
since signalHandlers may be replaced by CopyForExec() in
runSyscallAfterExecStop after the signalHandlers.mu has
been holded in TTY().
The problem is easy to reproduce with keeping to do "runsc ps".
The crash log is :
fatal error: sync: unlock of unlocked mutex
goroutine 5801304 [running]:
runtime.throw(0xfd019c, 0x1e)
GOROOT/src/runtime/panic.go:774 +0x72 fp=0xc001ba47b0 sp=0xc001ba4780 pc=0x431702
sync.throw(0xfd019c, 0x1e)
GOROOT/src/runtime/panic.go:760 +0x35 fp=0xc001ba47d0 sp=0xc001ba47b0 pc=0x431685
sync.(*Mutex).unlockSlow(0xc00cf94a30, 0xc0ffffffff)
GOROOT/src/sync/mutex.go:196 +0xd6 fp=0xc001ba47f8 sp=0xc001ba47d0 pc=0x4707d6
sync.(*Mutex).Unlock(0xc00cf94a30)
GOROOT/src/sync/mutex.go:190 +0x48 fp=0xc001ba4818 sp=0xc001ba47f8 pc=0x4706e8
gvisor.dev/gvisor/pkg/sentry/kernel.(*ThreadGroup).TTY(0xc011a9e800, 0x0)
pkg/sentry/kernel/tty.go:38 +0x88 fp=0xc001ba4868 sp=0xc001ba4818 pc=0x835fa8
gvisor.dev/gvisor/pkg/sentry/control.Processes(0xc00025ae00, 0xc013e397c0, 0x40, 0xc0137b9800, 0x1, 0x7f292e9a4cc0)
pkg/sentry/control/proc.go:366 +0x355 fp=0xc001ba49a0 sp=0xc001ba4868 pc=0x9ac4a5
gvisor.dev/gvisor/runsc/boot.(*containerManager).Processes(0xc0003b62c0, 0xc0051423d0, 0xc0137b9800, 0x0, 0x0)
runsc/boot/controller.go:228 +0xdf fp=0xc001ba49e8 sp=0xc001ba49a0 pc=0xaf06cf
Signed-off-by: chris.zn <chris.zn@antfin.com>
|
|
Do Source Address Selection when choosing an IPv6 source address as per RFC 6724
section 5 rules 1-3:
1) Prefer same address
2) Prefer appropriate scope
3) Avoid deprecated addresses.
A later change will update Source Address Selection to follow rules 4-8.
Tests:
Rule 1 & 2: stack.TestIPv6SourceAddressSelectionScopeAndSameAddress,
Rule 3: stack.TestAutoGenAddrTimerDeprecation,
stack.TestAutoGenAddrDeprecateFromPI
PiperOrigin-RevId: 289559373
|
|
Fixes #1490
Fixes #1495
PiperOrigin-RevId: 289523250
|
|
Updates #231
PiperOrigin-RevId: 289502669
|
|
PiperOrigin-RevId: 289479774
|
|
PiperOrigin-RevId: 289467083
|
|
This test fails on ubuntu 18.04 because preadv2 for some reason returns
EOPNOTSUPP instead of EINVAL. Instead of root-causing the failure, I'm dropping
the flag in the preadv2 call since it isn't under test in this scenario.
PiperOrigin-RevId: 289188358
|
|
PiperOrigin-RevId: 289169518
|
|
CancellableTimer tests were in a timer_test package but lived within the
tcpip directory. This caused issues with go tools.
PiperOrigin-RevId: 289166345
|
|
Allows retrieving the goroutine ID for concurrency testing when the race
detector is enabled.
Updates #1472
PiperOrigin-RevId: 289155308
|
|
This is a band-aid fix for now to prevent panics.
PiperOrigin-RevId: 289078453
|
|
* Rename syncutil to sync.
* Add aliases to sync types.
* Replace existing usage of standard library sync package.
This will make it easier to swap out synchronization primitives. For example,
this will allow us to use primitives from github.com/sasha-s/go-deadlock to
check for lock ordering violations.
Updates #1472
PiperOrigin-RevId: 289033387
|
|
PiperOrigin-RevId: 289019953
|
|
PiperOrigin-RevId: 289010316
|
|
bm-tools works via "Machine" objects, which are front
objects for actual virtual or physical machines. glcoud_producer
produces machines on GCP using the `gcloud` tool.
Included are:
- GCloudProducer - the class producing machines
- MockGCloudProducer - class for mocking GCloudProducer.
- tests using the mock
- test data as .json files. Code to generate this test data may be
included in a follow up.
PiperOrigin-RevId: 289005958
|
|
Inform the Stack's NDPDispatcher when it receives an NDP Router Advertisement
that updates the available configurations via DHCPv6. The Stack makes sure that
its NDPDispatcher isn't informed unless the avaiable configurations via DHCPv6
for a NIC is updated.
Tests: Test that a Stack's NDPDispatcher is informed when it receives an NDP
Router Advertisement that informs it of new configurations available via DHCPv6.
PiperOrigin-RevId: 289001283
|
|
Internal tools timeout after 60s during tests that are required to pass before
changes can be submitted. Separate out NDP tests into its own package to help
prevent timeouts when testing.
PiperOrigin-RevId: 288990597
|
|
PiperOrigin-RevId: 288965915
|
|
This makes it possible to call the sockopt from go even when the NIC has no
name.
PiperOrigin-RevId: 288955236
|
|
...retrievable later via stack.NICInfo().
Clients of this library can use it to add metadata that should be tracked
alongside a NIC, to avoid having to keep a map[tcpip.NICID]metadata mirroring
stack.Stack's nic map.
PiperOrigin-RevId: 288924900
|
|
PiperOrigin-RevId: 288921032
|
|
Add a new CancellableTimer type to encapsulate the work of safely stopping
timers when it fires at the same time some "related work" is being handled. The
term "related work" is some work that needs to be done while having obtained
some common lock (L).
Example: Say we have an invalidation timer that may be extended or cancelled by
some event. Creating a normal timer and simply cancelling may not be sufficient
as the timer may have already fired when the event handler attemps to cancel it.
Even if the timer and event handler obtains L before doing work, once the event
handler releases L, the timer will eventually obtain L and do some unwanted
work.
To prevent the timer from doing unwanted work, it checks if it should early
return instead of doing the normal work after obtaining L. When stopping the
timer callers must have L locked so the timer can be safely informed that it
should early return.
Test: Tests that CancellableTimer fires and resets properly. Test to make sure
the timer fn is not called after being stopped within the lock L.
PiperOrigin-RevId: 288806984
|
|
|
|
This change calls a new Truncate method on the EndpointReader in RecvMsg for
both netlink and unix sockets. This allows readers such as sockets to peek at
the length of data without actually reading it to a buffer.
Fixes #993 #1240
PiperOrigin-RevId: 288800167
|
|
PiperOrigin-RevId: 288799694
|
|
|
|
Panic found by syzakller.
PiperOrigin-RevId: 288799046
|
|
For everyone's joy, this is a tool that reopens issues that
have been closed, but are still referenced by TODOs in the
code. The idea is to run it in Kokoro nightly. Kokoro changes
are coming up next.
PiperOrigin-RevId: 288789560
|
|
...and port V6OnlyOption to it.
PiperOrigin-RevId: 288789451
|
|
PiperOrigin-RevId: 288779416
|
|
PiperOrigin-RevId: 288772878
|
|
PiperOrigin-RevId: 288767927
|
|
PiperOrigin-RevId: 288743614
|
|
|
|
|
|
|
|
|
|
|
|
Updates #1195
PiperOrigin-RevId: 288725745
|
|
PacketLooping is already a member on the passed Route.
PiperOrigin-RevId: 288721500
|
|
This gets us closer to passing the iptables tests and opens up iptables
so it can be worked on by multiple people.
A few restrictions are enforced for security (i.e. we don't want to let
users write a bunch of iptables rules and then just not enforce them):
- Only the filter table is writable.
- Only ACCEPT rules with no matching criteria can be added.
|
|
...enabling us to remove the "CreateNamedLoopbackNIC" variant of
CreateNIC and all the plumbing to connect it through to where the value
is read in FindRoute.
PiperOrigin-RevId: 288713093
|
|
Before, each of small read()'s that raises window either from zero
or above threshold of aMSS, would generate an ACK. In a classic
silly-window-syndrome scenario, we can imagine a pessimistic case
when small read()'s generate a stream of ACKs.
This PR fixes that, essentially treating window size < aMSS as zero.
We send ACK exactly in a moment when window increases to >= aMSS
or half of receive buffer size (whichever smaller).
|
|
PiperOrigin-RevId: 288642552
|
|
The write tests are fitted to Linux-specific behavior, but it is not
well-specified. Tweak the tests to allow for both acceptable outcomes.
PiperOrigin-RevId: 288606386
|
|
Support deprecating network endpoints on a NIC. If an endpoint is deprecated, it
should not be used for new connections unless a more preferred endpoint is not
available, or unless the deprecated endpoint was explicitly requested.
Test: Test that deprecated endpoints are only returned when more preferred
endpoints are not available and SLAAC addresses are deprecated after its
preferred lifetime
PiperOrigin-RevId: 288562705
|
|
When receiving data, netstack avoids sending spurious acks. When
user does recv() should netstack send ack telling the sender that
the window was increased? It depends. Before this patch, netstack
_will_ send the ack in the case when window was zero or window >>
scale was zero. Basically - when recv space increased from zero.
This is not working right with silly-window-avoidance on the sender
side. Some network stacks refuse to transmit segments, that will fill
the window but are below MSS. Before this patch, this confuses
netstack. On one hand if the window was like 3 bytes, netstack
will _not_ send ack if the window increases. On the other hand
sending party will refuse to transmit 3-byte packet.
This patch changes that, making netstack will send an ACK when
the available buffer size increases to or above 1*MSS. This will
inform other party buffer is large enough, and hopefully uncork it.
Signed-off-by: Marek Majkowski <marek@cloudflare.com>
|
|
Test: Test that an IPv6 link-local address is not auto-generated for loopback
NICs, even when it is enabled for non-loopback NICS.
PiperOrigin-RevId: 288519591
|
|
PiperOrigin-RevId: 288402480
|
|
Pass the NIC-internal name to the NIC name function when generating opaque IIDs
so implementations can use the name that was provided when the NIC was created.
Previously, explicit NICID to NIC name resolution was required from the netstack
integrator.
Tests: Test that the name provided when creating a NIC is passed to the NIC name
function when generating opaque IIDs.
PiperOrigin-RevId: 288395359
|