summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2019-11-06Discover default routers from Router AdvertisementsGhanan Gowripalan
This change allows the netstack to do NDP's Router Discovery as outlined by RFC 4861 section 6.3.4. Note, this change will not break existing uses of netstack as the default configuration for the stack options is set in such a way that Router Discovery will not be performed. See `stack.Options` and `stack.NDPConfigurations` for more details. This change introduces 2 options required to take advantage of Router Discovery, all available under NDPConfigurations: - HandleRAs: Whether or not NDP RAs are processes - DiscoverDefaultRouters: Whether or not Router Discovery is performed Another note: for a NIC to process Router Advertisements, it must not be a router itself. Currently the netstack does not have per-interface routing configuration; the routing/forwarding configuration is controlled stack-wide. Therefore, if the stack is configured to enable forwarding/routing, no Router Advertisements will be processed. Tests: Unittest to make sure that Router Discovery and updates to the routing table only occur if explicitly configured to do so. Unittest to make sure at max stack.MaxDiscoveredDefaultRouters discovered default routers are remembered. PiperOrigin-RevId: 278965143
2019-11-06Use PacketBuffers, rather than VectorisedViews, in netstack.Kevin Krakauer
PacketBuffers are analogous to Linux's sk_buff. They hold all information about a packet, headers, and payload. This is important for: * iptables to access various headers of packets * Preventing the clutter of passing different net and link headers along with VectorisedViews to packet handling functions. This change only affects the incoming packet path, and a future change will change the outgoing path. Benchmark Regular PacketBufferPtr PacketBufferConcrete -------------------------------------------------------------------------------- BM_Recvmsg 400.715MB/s 373.676MB/s 396.276MB/s BM_Sendmsg 361.832MB/s 333.003MB/s 335.571MB/s BM_Recvfrom 453.336MB/s 393.321MB/s 381.650MB/s BM_Sendto 378.052MB/s 372.134MB/s 341.342MB/s BM_SendmsgTCP/0/1k 353.711MB/s 316.216MB/s 322.747MB/s BM_SendmsgTCP/0/2k 600.681MB/s 588.776MB/s 565.050MB/s BM_SendmsgTCP/0/4k 995.301MB/s 888.808MB/s 941.888MB/s BM_SendmsgTCP/0/8k 1.517GB/s 1.274GB/s 1.345GB/s BM_SendmsgTCP/0/16k 1.872GB/s 1.586GB/s 1.698GB/s BM_SendmsgTCP/0/32k 1.017GB/s 1.020GB/s 1.133GB/s BM_SendmsgTCP/0/64k 475.626MB/s 584.587MB/s 627.027MB/s BM_SendmsgTCP/0/128k 416.371MB/s 503.434MB/s 409.850MB/s BM_SendmsgTCP/0/256k 323.449MB/s 449.599MB/s 388.852MB/s BM_SendmsgTCP/0/512k 243.992MB/s 267.676MB/s 314.474MB/s BM_SendmsgTCP/0/1M 95.138MB/s 95.874MB/s 95.417MB/s BM_SendmsgTCP/0/2M 96.261MB/s 94.977MB/s 96.005MB/s BM_SendmsgTCP/0/4M 96.512MB/s 95.978MB/s 95.370MB/s BM_SendmsgTCP/0/8M 95.603MB/s 95.541MB/s 94.935MB/s BM_SendmsgTCP/0/16M 94.598MB/s 94.696MB/s 94.521MB/s BM_SendmsgTCP/0/32M 94.006MB/s 94.671MB/s 94.768MB/s BM_SendmsgTCP/0/64M 94.133MB/s 94.333MB/s 94.746MB/s BM_SendmsgTCP/0/128M 93.615MB/s 93.497MB/s 93.573MB/s BM_SendmsgTCP/0/256M 93.241MB/s 95.100MB/s 93.272MB/s BM_SendmsgTCP/1/1k 303.644MB/s 316.074MB/s 308.430MB/s BM_SendmsgTCP/1/2k 537.093MB/s 584.962MB/s 529.020MB/s BM_SendmsgTCP/1/4k 882.362MB/s 939.087MB/s 892.285MB/s BM_SendmsgTCP/1/8k 1.272GB/s 1.394GB/s 1.296GB/s BM_SendmsgTCP/1/16k 1.802GB/s 2.019GB/s 1.830GB/s BM_SendmsgTCP/1/32k 2.084GB/s 2.173GB/s 2.156GB/s BM_SendmsgTCP/1/64k 2.515GB/s 2.463GB/s 2.473GB/s BM_SendmsgTCP/1/128k 2.811GB/s 3.004GB/s 2.946GB/s BM_SendmsgTCP/1/256k 3.008GB/s 3.159GB/s 3.171GB/s BM_SendmsgTCP/1/512k 2.980GB/s 3.150GB/s 3.126GB/s BM_SendmsgTCP/1/1M 2.165GB/s 2.233GB/s 2.163GB/s BM_SendmsgTCP/1/2M 2.370GB/s 2.219GB/s 2.453GB/s BM_SendmsgTCP/1/4M 2.005GB/s 2.091GB/s 2.214GB/s BM_SendmsgTCP/1/8M 2.111GB/s 2.013GB/s 2.109GB/s BM_SendmsgTCP/1/16M 1.902GB/s 1.868GB/s 1.897GB/s BM_SendmsgTCP/1/32M 1.655GB/s 1.665GB/s 1.635GB/s BM_SendmsgTCP/1/64M 1.575GB/s 1.547GB/s 1.575GB/s BM_SendmsgTCP/1/128M 1.524GB/s 1.584GB/s 1.580GB/s BM_SendmsgTCP/1/256M 1.579GB/s 1.607GB/s 1.593GB/s PiperOrigin-RevId: 278940079
2019-11-06Send a TCP RST in response to a TCP SYN-ACK on a listening endpointGhanan Gowripalan
This change better follows what is outlined in RFC 793 section 3.4 figure 12 where a listening socket should not accept a SYN-ACK segment in response to a (potentially) old SYN segment. Tests: Test that checks the TCP RST segment sent in response to a TCP SYN-ACK segment received on a listening TCP endpoint. PiperOrigin-RevId: 278893114
2019-11-06Validate incoming NDP Router Advertisements, as per RFC 4861 section 6.1.2Ghanan Gowripalan
This change validates incoming NDP Router Advertisements as per RFC 4861 section 6.1.2. It also includes the skeleton to handle Router Advertiements that arrive on some NIC. Tests: Unittest to make sure only valid NDP Router Advertisements are received/ not dropped. PiperOrigin-RevId: 278891972
2019-11-05test/root: check that memory accouting works as expectedAndrei Vagin
PiperOrigin-RevId: 278739427
2019-11-05Fix repository build scripts.Adin Scannell
This fixes a number of issues with the repository build process: * Fix the overall structure of the repository. * Fix the debian package description. * Fix the broken version number for packages. * Update the digest algorithm used for signing the release. I've validated that installation works from a separate staging bucket. Updates #852 PiperOrigin-RevId: 278716914
2019-11-04kokoro: run KVM syscall testsAndrei Vagin
We don't know how stable they are, so let's start with warning. PiperOrigin-RevId: 278484186
2019-11-04Bump rules_go to v0.20.2 and go toolchain to v1.13.4.Nicolas Lacasse
PiperOrigin-RevId: 278424814
2019-11-04Check that a file is a regular file with open(O_TRUNC).Kevin Krakauer
It was possible to panic the sentry by opening a cache revalidating folder with O_TRUNC|O_CREAT. PiperOrigin-RevId: 278417533
2019-11-04Add NETLINK_KOBJECT_UEVENT socket supportMichael Pratt
NETLINK_KOBJECT_UEVENT sockets send udev-style messages for device events. gVisor doesn't have any device events, so our sockets don't need to do anything once created. systemd's device manager needs to be able to create one of these sockets. It also wants to install a BPF filter on the socket. Since we'll never send any messages, the filter would never be invoked, thus we just fake it out. Fixes #1117 Updates #1119 PiperOrigin-RevId: 278405893
2019-11-04Update membarrier bugMichael Pratt
Updates #267 PiperOrigin-RevId: 278402684
2019-11-01Merge pull request #1109 from xiaobo55x:fsgofergVisor bot
PiperOrigin-RevId: 278032567
2019-11-01Add SO_PASSCRED support to netlink socketsMichael Pratt
Since we only supporting sending messages from the kernel, the peer is always the kernel, simplifying handling. There are currently no known users of SO_PASSCRED that would actually receive messages from gVisor, but adding full support is barely more work than stubbing out fake support. Updates #1117 Fixes #1119 PiperOrigin-RevId: 277981465
2019-11-01Add "manual" tag back to runtime tests.Nicolas Lacasse
PiperOrigin-RevId: 277971910
2019-11-01Allow the watchdog to detect when the sandbox is stuck during setup.Nicolas Lacasse
The watchdog currently can find stuck tasks, but has no way to tell if the sandbox is stuck before the application starts executing. This CL adds a startup timeout and action to the watchdog. If Start() is not called before the given timeout (if non-zero), then the watchdog will take the action. PiperOrigin-RevId: 277970577
2019-11-01Don't log "p9.channel.service: flipcall connection shutdown".Jamie Liu
This gets quite spammy, especially in tests. PiperOrigin-RevId: 277970468
2019-11-01tests: don't use ASSERT_THAT after forkAndrei Vagin
PiperOrigin-RevId: 277965624
2019-10-31Add context to state.Adin Scannell
PiperOrigin-RevId: 277840416
2019-10-31Add systemd-cgroup flag option.Ian Lewis
Adds a systemd-cgroup flag option that prints an error letting the user know that systemd cgroups are not supported and points them to the relevant issue. Issue #193 PiperOrigin-RevId: 277837162
2019-10-31Add LICENSE and AUTHORS to the go branch.Adin Scannell
Also, construct the README directly so that edits can be made. PiperOrigin-RevId: 277782095
2019-10-31platform/kvm: calll sigtimedwait with zero timeoutAndrei Vagin
sigtimedwait is used to check pending signals and it should not block. PiperOrigin-RevId: 277777269
2019-10-31Fix overloaded use of $RUNTIME.Brad Burlage
Turns out we use $RUNTIME in scripts/common.sh to give a name to the runsc runtime used by the tests. PiperOrigin-RevId: 277764383
2019-10-31Merge pull request #1058 from cmingxu:mastergVisor bot
PiperOrigin-RevId: 277623766
2019-10-30Deep copy dispatcher views.Kevin Krakauer
When VectorisedViews were passed up the stack from packet_dispatchers, we were passing a sub-slice of the dispatcher's views fields. The dispatchers then immediately set those views to nil. This wasn't caught before because every implementer copied the data in these views before returning. PiperOrigin-RevId: 277615351
2019-10-30Add Kokoro config for new runtime testsBrad Burlage
PiperOrigin-RevId: 277607217
2019-10-30support using KVM_MEM_READONLY for arm64 regionslubinszARM
On Arm platform, "setMemoryRegion" has extra permission checks. In virt/kvm/arm/mmu.c: kvm_arch_prepare_memory_region() .... if (writable && !(vma->vm_flags & VM_WRITE)) { ret = -EPERM; break; } .... So, for Arm platform, the "flags" for kvm_memory_region is required. And on x86 platform, the "flags" can be always set as '0'. Signed-off-by: Bin Lu <bin.lu@arm.com> COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/810 from lubinszARM:pr_setregion 8c99b19cfb0c859c6630a1cfff951db65fcf87ac PiperOrigin-RevId: 277602603
2019-10-30Fix container lockingFabricio Voznika
Sandbox root dir was not being saved with the Container state, so it would point to the wrong directory location when attempting to lock the sandbox. This led to race conditions saving and loading container state. Fixing it, led to multiple deadlocks. I've moved the saving and locking logic to a separate struct and moved the lock file inside the RootDir (instead of container root dir), which allows the lock to be taken inside Destroy, and removes the need to lock the sandbox. PiperOrigin-RevId: 277599612
2019-10-30Store endpoints inside multiPortEndpoint in a sorted orderAndrei Vagin
It is required to guarantee the same order of endpoints after save/restore. PiperOrigin-RevId: 277598665
2019-10-30Clean up typos in test names.Dean Deng
PiperOrigin-RevId: 277572791
2019-10-30Enable runsc/fsgofer support on arm64.Haibo Xu
newfstatat() syscall is not supported on arm64, so we resort to use the fstatat() syscall. Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I9e89d46c5ec9ae07db201c9da5b6dda9bfd2eaf0
2019-10-29Add Close and Wait methods to stack.Ian Gudger
Link endpoints still don't have a unified way to be requested to stop. Updates #837 PiperOrigin-RevId: 277398952
2019-10-29Add endpoint tracking to the stack.Ian Gudger
In the future this will replace DanglingEndpoints. DanglingEndpoints must be kept for now due to issues with save/restore. This is arguably a cleaner design and allows the stack to know which transport endpoints might still be using its link endpoints. Updates #837 PiperOrigin-RevId: 277386633
2019-10-29Fix grammar in comment.Dean Deng
Missing "for". PiperOrigin-RevId: 277358513
2019-10-29Update symlink traversal limit when resolving interpreter path.Dean Deng
When execveat is called on an interpreter script, the symlink count for resolving the script path should be separate from the count for resolving the the corresponding interpreter. An ELOOP error should not occur if we do not hit the symlink limit along any individual path, even if the total number of symlinks encountered exceeds the limit. Closes #574 PiperOrigin-RevId: 277358474
2019-10-29Update build tags to allow Go 1.14Michael Pratt
Currently there are no ABI changes. We should check again closer to release. PiperOrigin-RevId: 277349744
2019-10-29Refactor logic for loadExecutable.Dean Deng
Separate the handling of filenames and *fs.File objects in a more explicit way for the sake of clarity. PiperOrigin-RevId: 277344203
2019-10-29Fix PollWithFullBufferBlocks.Bhasker Hariharan
Set the snd/rcv buffer sizes so that the test is deterministic and runs in a reasonable amount of time. It also ensures that we disable any auto-tuning of the send/receive buffer which may happen. PiperOrigin-RevId: 277337232
2019-10-29Allow waiting for Endpoint worker goroutines to finish.Ian Gudger
Updates #837 PiperOrigin-RevId: 277325162
2019-10-29Merge pull request #1087 from xiaobo55x:fstat_NlinkgVisor bot
PiperOrigin-RevId: 277324979
2019-10-29Support iterating an NDP options buffer.Ghanan Gowripalan
This change helps support iterating over an NDP options buffer so that implementations can handle all the NDP options present in an NDP packet. Note, this change does not yet actually handle these options, it just provides the tools to do so (in preparation for NDP's Prefix, Parameter, and a complete implementation of Neighbor Discovery). Tests: Unittests to make sure we can iterate over a valid NDP options buffer that may contain multiple options. Also tests to check an iterator before using it to see if the NDP options buffer is malformed. PiperOrigin-RevId: 277312487
2019-10-29Disallow execveat on interpreter scripts with fd opened with O_CLOEXEC.Dean Deng
When an interpreter script is opened with O_CLOEXEC and the resulting fd is passed into execveat, an ENOENT error should occur (the script would otherwise be inaccessible to the interpreter). This matches the actual behavior of Linux's execveat. PiperOrigin-RevId: 277306680
2019-10-28Deflake TestCheckpointRestoreFabricio Voznika
PiperOrigin-RevId: 277189064
2019-10-28Use the user supplied TCP MSS when creating a new active socketGhanan Gowripalan
This change supports using a user supplied TCP MSS for new active TCP connections. Note, the user supplied MSS must be less than or equal to the maximum possible MSS for a TCP connection's route. If it is greater than the maximum possible MSS, the maximum possible MSS will be used as the connection's MSS instead. This change does not use this user supplied MSS for connections accepted from listening sockets - that will come in a later change. Test: Test that outgoing TCP SYN segments contain a TCP MSS option with the user supplied MSS if it is not greater than the maximum possible MSS for the route. PiperOrigin-RevId: 277185125
2019-10-28Update commentMichael Pratt
FDTable.GetFile doesn't exist. PiperOrigin-RevId: 277089842
2019-10-28Cast the Stat_t.Nlink to uint64 on arm64.Haibo Xu
Since the syscall.Stat_t.Nlink is defined as different types on amd64 and arm64(uint64 and uint32 respectively), we need to cast them to a unified uint64 type in gVisor code. Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I7542b99b195c708f3fc49b1cbe6adebdd2f6e96b
2019-10-25Aggregate arguments for loading executables into a single struct.Dean Deng
This change simplifies the function signatures of functions related to loading executables, such as LoadTaskImage, Load, loadBinary. PiperOrigin-RevId: 276821187
2019-10-25Validate the checksum for incoming ICMPv6 packetsGhanan Gowripalan
This change validates the ICMPv6 checksum field before further processing an ICMPv6 packet. Tests: Unittests to make sure that only ICMPv6 packets with a valid checksum are accepted/processed. Existing tests using checker.ICMPv6 now also check the ICMPv6 checksum field. PiperOrigin-RevId: 276779148
2019-10-25Convert DelayOption to the newer/faster SockOpt int type.Ian Gudger
DelayOption is set on all new endpoints in gVisor. PiperOrigin-RevId: 276746791
2019-10-25test/syscall: Remove duplicated gtest/gtest.h.Haibo
Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I05a7ec69b98b88931ba4a8adb3e8a7b822006001 COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/1023 from xiaobo55x:syscall_test d44a8b1f827ed4081997af96cd58ba7449e0a9e1 PiperOrigin-RevId: 276740442
2019-10-25platform/ptrace: use tgkill instead of killAndrei Vagin
The syscall filters don't allow kill, just tgkill. PiperOrigin-RevId: 276718421
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-18 19:38:33 +0000