Age | Commit message (Collapse) | Author |
|
These options allow overriding the signal that gets sent to the process when
I/O operations are available on the file descriptor, rather than the default
`SIGIO` signal. Doing so also populates `siginfo` to contain extra information
about which file descriptor caused the event (`si_fd`) and what events happened
on it (`si_band`). The logic around which FD is populated within `si_fd`
matches Linux's, which means it has some weird edge cases where that value may
not actually refer to a file descriptor that is still valid.
This CL also ports extra S/R logic regarding async handler in VFS2.
Without this, async I/O handlers aren't properly re-registered after S/R.
PiperOrigin-RevId: 345436598
|
|
PiperOrigin-RevId: 345399936
|
|
Previous experience has shown that these types of wrappers tends to create two
kinds of problems: hidden allocations (e.g. each call to
FileReadWriteSeeker.Read/Write allocates a usermem.BytesIO on the heap) and
hidden lock ordering problems (e.g. VFS1 splice deadlocks). Since this is only
needed by fsimpl/verity, move it there.
PiperOrigin-RevId: 345377830
|
|
`slice := *(*[]unsafe.Pointer)(...)` makes a copy of the slice header, which
then escapes because of the conditional `atomic.StorePointer(&f.slice, &slice)`
from table expansion. This occurs even when the table doesn't expand, and when
it can't (e.g. `close()` => `f.setAll(nil)`). Fix this by avoiding the copy
until after table expansion.
Before this CL:
```
TEXT pkg/sentry/kernel/kernel.(*FDTable).setAll(SB) pkg/sentry/kernel/fd_table_unsafe.go
fd_table_unsafe.go:119 0x7f00005f50e0 64488b0c25f8ffffff MOVQ FS:0xfffffff8, CX
fd_table_unsafe.go:119 0x7f00005f50e9 483b6110 CMPQ 0x10(CX), SP
fd_table_unsafe.go:119 0x7f00005f50ed 0f864d040000 JBE 0x7f00005f5540
fd_table_unsafe.go:119 0x7f00005f50f3 4883c480 ADDQ $-0x80, SP
fd_table_unsafe.go:119 0x7f00005f50f7 48896c2478 MOVQ BP, 0x78(SP)
fd_table_unsafe.go:119 0x7f00005f50fc 488d6c2478 LEAQ 0x78(SP), BP
fd_table_unsafe.go:120 0x7f00005f5101 488b8424a8000000 MOVQ 0xa8(SP), AX
fd_table_unsafe.go:120 0x7f00005f5109 4885c0 TESTQ AX, AX
fd_table_unsafe.go:120 0x7f00005f510c 7411 JE 0x7f00005f511f
fd_table_unsafe.go:120 0x7f00005f510e 488b8c24b0000000 MOVQ 0xb0(SP), CX
fd_table_unsafe.go:120 0x7f00005f5116 4885c9 TESTQ CX, CX
fd_table_unsafe.go:120 0x7f00005f5119 0f8500040000 JNE 0x7f00005f551f
fd_table_unsafe.go:124 0x7f00005f511f 488d05da115700 LEAQ 0x5711da(IP), AX
fd_table_unsafe.go:124 0x7f00005f5126 48890424 MOVQ AX, 0(SP)
fd_table_unsafe.go:124 0x7f00005f512a e8d19fa1ff CALL runtime.newobject(SB)
fd_table_unsafe.go:124 0x7f00005f512f 488b7c2408 MOVQ 0x8(SP), DI
fd_table_unsafe.go:124 0x7f00005f5134 488b842488000000 MOVQ 0x88(SP), AX
fd_table_unsafe.go:124 0x7f00005f513c 488b4820 MOVQ 0x20(AX), CX
fd_table_unsafe.go:124 0x7f00005f5140 488b5108 MOVQ 0x8(CX), DX
fd_table_unsafe.go:124 0x7f00005f5144 488b19 MOVQ 0(CX), BX
fd_table_unsafe.go:124 0x7f00005f5147 488b4910 MOVQ 0x10(CX), CX
fd_table_unsafe.go:124 0x7f00005f514b 48895708 MOVQ DX, 0x8(DI)
fd_table_unsafe.go:124 0x7f00005f514f 48894f10 MOVQ CX, 0x10(DI)
fd_table_unsafe.go:124 0x7f00005f5153 833df6e1120100 CMPL $0x0, runtime.writeBarrier(SB)
fd_table_unsafe.go:124 0x7f00005f515a 660f1f440000 NOPW 0(AX)(AX*1)
fd_table_unsafe.go:124 0x7f00005f5160 0f8589030000 JNE 0x7f00005f54ef
fd_table_unsafe.go:124 0x7f00005f5166 48891f MOVQ BX, 0(DI)
fd_table_unsafe.go:124 0x7f00005f5169 48897c2470 MOVQ DI, 0x70(SP)
fd_table_unsafe.go:127 0x7f00005f516e 8bb424a0000000 MOVL 0xa0(SP), SI
fd_table_unsafe.go:127 0x7f00005f5175 39d6 CMPL DX, SI
fd_table_unsafe.go:127 0x7f00005f5177 0f8c5f030000 JL 0x7f00005f54dc
...
```
After this CL:
```
TEXT pkg/sentry/kernel/kernel.(*FDTable).setAll(SB) pkg/sentry/kernel/fd_table_unsafe.go
fd_table_unsafe.go:119 0x7f00005f50e0 64488b0c25f8ffffff MOVQ FS:0xfffffff8, CX
fd_table_unsafe.go:119 0x7f00005f50e9 488d4424e8 LEAQ -0x18(SP), AX
fd_table_unsafe.go:119 0x7f00005f50ee 483b4110 CMPQ 0x10(CX), AX
fd_table_unsafe.go:119 0x7f00005f50f2 0f868e040000 JBE 0x7f00005f5586
fd_table_unsafe.go:119 0x7f00005f50f8 4881ec98000000 SUBQ $0x98, SP
fd_table_unsafe.go:119 0x7f00005f50ff 4889ac2490000000 MOVQ BP, 0x90(SP)
fd_table_unsafe.go:119 0x7f00005f5107 488dac2490000000 LEAQ 0x90(SP), BP
fd_table_unsafe.go:120 0x7f00005f510f 488b9424c0000000 MOVQ 0xc0(SP), DX
fd_table_unsafe.go:120 0x7f00005f5117 660f1f840000000000 NOPW 0(AX)(AX*1)
fd_table_unsafe.go:120 0x7f00005f5120 4885d2 TESTQ DX, DX
fd_table_unsafe.go:120 0x7f00005f5123 0f8406040000 JE 0x7f00005f552f
fd_table_unsafe.go:120 0x7f00005f5129 488b9c24c8000000 MOVQ 0xc8(SP), BX
fd_table_unsafe.go:120 0x7f00005f5131 4885db TESTQ BX, BX
fd_table_unsafe.go:120 0x7f00005f5134 0f852b040000 JNE 0x7f00005f5565
fd_table_unsafe.go:124 0x7f00005f513a 488bb424a0000000 MOVQ 0xa0(SP), SI
fd_table_unsafe.go:124 0x7f00005f5142 488b7e20 MOVQ 0x20(SI), DI
fd_table_unsafe.go:127 0x7f00005f5146 4c8b4708 MOVQ 0x8(DI), R8
fd_table_unsafe.go:127 0x7f00005f514a 448b8c24b8000000 MOVL 0xb8(SP), R9
fd_table_unsafe.go:127 0x7f00005f5152 4539c1 CMPL R8, R9
fd_table_unsafe.go:127 0x7f00005f5155 0f8d4a020000 JGE 0x7f00005f53a5
...
```
PiperOrigin-RevId: 345363242
|
|
testutil.RandomID was using Rand.Read which is not safe for concurrent use.
It caused name conflicts in packetimpact tests when they are run in parallel.
Adding a mutex to protect the Rand.Read operation.
PiperOrigin-RevId: 345360062
|
|
PiperOrigin-RevId: 345359823
|
|
This change lets us split the v4 stats from the v6 stats, which will be
useful when adding stats for each network endpoint.
PiperOrigin-RevId: 345322615
|
|
However, receiving duplicated fragments will not cause reassembly to
fail. This is what Linux does too:
https://github.com/torvalds/linux/blob/38525c6/net/ipv4/inet_fragment.c#L355
PiperOrigin-RevId: 345309546
|
|
It's possible that all the cases in a given batch are excluded if
the offsets line up just right, which will cause the test to fail.
Don't generate an invalid test in this case.
PiperOrigin-RevId: 345276588
|
|
Moved AddressAndFamily() and ConvertAddress() to socket package from netstack.
This helps because these utilities are used by sibling netstack packages.
Such sibling dependencies can later cause circular dependencies. Common utils
shared between siblings should be moved up to the parent.
PiperOrigin-RevId: 345275571
|
|
This has no effect on the continuous integration system, and simply
publishes a cached container image containing the agent and metrics
agent with known provenance.
PiperOrigin-RevId: 345274375
|
|
PiperOrigin-RevId: 345265342
|
|
Refactor some utilities and rename some others for clarity.
PiperOrigin-RevId: 345247836
|
|
This is quite disruptive to run in some environments.
PiperOrigin-RevId: 345247206
|
|
This was removed in an earlier commit. This should remain as it allows to add
tcp-only state to be exposed.
PiperOrigin-RevId: 345246155
|
|
PiperOrigin-RevId: 345245285
|
|
PiperOrigin-RevId: 345178956
|
|
...by using the fake clock.
TestRouterSolicitation no longer runs its sub-tests in parallel now that
the sub-tests are not long-running - the fake clock simulates time
moving forward.
PiperOrigin-RevId: 345165794
|
|
PiperOrigin-RevId: 345162450
|
|
PiperOrigin-RevId: 345147980
|
|
Stop showing wrong timeout values in packetimpact test error messages. e.g.
"got frames ... want ... during -123ms"
PiperOrigin-RevId: 345144938
|
|
PiperOrigin-RevId: 345062676
|
|
Before this change, the join count and the state for IGMP/MLD was held
across different types which required multiple locks to be held when
accessing a multicast group's state.
Bug #4682, #4861
Fixes #4916
PiperOrigin-RevId: 345019091
|
|
PiperOrigin-RevId: 344958513
|
|
ContainerExecStart and ContainerExecAttach both call the /exec/id/start API
endpoint.
PiperOrigin-RevId: 344946627
|
|
Fixing the sendto deadlock exposed yet another deadlock where a lock inversion
occurs on the handleControlPacket path where e.mu and demuxer.epsByNIC.mu are
acquired in reverse order from say when RegisterTransportEndpoint is called
in endpoint.Connect().
This fix sidesteps the issue by just making endpoint.state an atomic and gets rid
of the need to acquire e.mu in e.HandleControlPacket.
PiperOrigin-RevId: 344939895
|
|
These tests check if a maximum-sized (64k) packet is reassembled without
receiving a fragment with MF flag set to zero.
PiperOrigin-RevId: 344913172
|
|
PiperOrigin-RevId: 344896991
|
|
Test: ip_test.TestMGPWithNICLifecycle
Bug #4682, #4861
PiperOrigin-RevId: 344888091
|
|
Currently, if containerd is installed locally via tools/installers/containerd,
then it will not necessarily be used if containerd is installed in the system
path. This means that the existing containerd tests are all likely broken.
Also, use libbtrfs-dev instead of btrfs-tools, which is not actually required.
PiperOrigin-RevId: 344879109
|
|
Bug #4803
PiperOrigin-RevId: 344553664
|
|
Ports the following options:
- TCP_NODELAY
- TCP_CORK
- TCP_QUICKACK
Also deletes the {Get/Set}SockOptBool interface methods from all implementations
PiperOrigin-RevId: 344378824
|
|
We will use SocketOptions for all kinds of options, not just SOL_SOCKET options
because (1) it is consistent with Linux which defines all option variables on
the top level socket struct, (2) avoid code complexity. Appropriate checks
have been added for matching option level to the endpoint type.
Ported the following options to this new utility:
- IP_MULTICAST_LOOP
- IP_RECVTOS
- IPV6_RECVTCLASS
- IP_PKTINFO
- IP_HDRINCL
- IPV6_V6ONLY
Changes in behavior (these are consistent with what Linux does AFAICT):
- Now IP_MULTICAST_LOOP can be set for TCP (earlier it was a noop) but does not
affect the endpoint itself.
- We can now getsockopt IP_HDRINCL (earlier we would get an error).
- Now we return ErrUnknownProtocolOption if SOL_IP or SOL_IPV6 options are used
on unix sockets.
- Now we return ErrUnknownProtocolOption if SOL_IPV6 options are used on non
AF_INET6 endpoints.
This change additionally makes the following modifications:
- Add State() uint32 to commonEndpoint because both tcpip.Endpoint and
transport.Endpoint interfaces have it. It proves to be quite useful.
- Gets rid of SocketOptionsHandler.IsListening(). It was an anomaly as it was
not a handler. It is now implemented on netstack itself.
- Gets rid of tcp.endpoint.EndpointInfo and directly embeds
stack.TransportEndpointInfo. There was an unnecessary level of embedding
which served no purpose.
- Removes some checks dual_stack_test.go that used the errors from
GetSockOptBool(tcpip.V6OnlyOption) to confirm some state. This is not
consistent with the new design and also seemed to be testing the
implementation instead of behavior.
PiperOrigin-RevId: 344354051
|
|
...as defined by RFC 2710. Querier (router)-side MLDv1 is not yet
supported.
The core state machine is shared with IGMPv2.
This is guarded behind a flag (ipv6.Options.MLDEnabled).
Tests: ip_test.TestMGP*
Bug #4861
PiperOrigin-RevId: 344344095
|
|
Multiple goroutines may use the same stack.Route concurrently so
the stack.Route should make sure that any functions called on it
are thread-safe.
Fixes #4073
PiperOrigin-RevId: 344320491
|
|
To create DUTs in parallel, we need to create goroutines to do the setup. The
old code base has a lot of t.Fatal(f) usage in those setup functions which is
not great for this change: "FailNow must be called from the goroutine running
the test or benchmark function, not from other goroutines created during the
test" (https://golang.org/pkg/testing/#T.FailNow).
- Cleanup all t.Fatal(f) usage in DUT.Prepare()
- use goroutines to create DUTs in parallel
PiperOrigin-RevId: 344275809
|
|
Added a new flag num_duts to the test runner to create multiple DUTs for the
testbench can connect to.
PiperOrigin-RevId: 344195435
|
|
Fix a panic when two entries in Failed state are removed at the same time.
PiperOrigin-RevId: 344143777
|
|
Because the code handles a bad header as "payload" right up to the last moment
we need to make sure payload handling does not remove the error information.
Fixes #4909
PiperOrigin-RevId: 344141690
|
|
Add a NIC-specific neighbor table statistic so we can determine how many
packets have been queued to Failed neighbors, indicating an unhealthy local
network. This change assists us to debug in-field issues where subsequent
traffic to a neighbor fails.
Fixes #4819
PiperOrigin-RevId: 344131119
|
|
1. setsockopt(SO_RCVTIMEO, 0) == never timeout
2. float64(time.Microsecond/time.Second) == 0
3. packetimpact tests use a lot of 1s timeouts
This becomes a more significant problem because of a recent change that binds
the sniffer only on the specific testNet interface so now the traffic on the
ctrlNet cannot wake up the blocking call anymore.
PiperOrigin-RevId: 344123465
|
|
The IGMPv2 core state machine can be shared with MLDv1 since they are
almost identical, ignoring specific addresses, constants and packets.
Bug #4682, #4861
PiperOrigin-RevId: 344102615
|
|
The bug has been fixed.
PiperOrigin-RevId: 344088206
|
|
PiperOrigin-RevId: 344009602
|
|
Bug #4682
PiperOrigin-RevId: 343993297
|
|
Summary of the approach: the test runner will set up a few DUTs according to
a flag and pass all the test networks to the testbench. The testbench will only
reside in a single container. The testbench will put all the test networks into
a buffered channel which served as a semaphore and now the user can freely use
t.Parallel() in (sub)tests and the true parallelism will be determined by how
many DUTs are configured. Creating DUTs on demand is not supported yet, the
test author should determine the number of DUTs to be used statically.
Specifically in this change:
- Don't export any global variables about the test network in testbench.
- Sniffer only binds on the local interface because it will be possible to have
multiple interfaces to multiple DUTs in a single testbench container.
- Migrate existing tests to stop using global variables.
PiperOrigin-RevId: 343965962
|
|
PiperOrigin-RevId: 343959348
|
|
PiperOrigin-RevId: 343946859
|
|
This change also simplifies and documents the build_cmd pipeline, and
reduces general noise for debugging Makefile issues.
It also drops the mapping for /etc/docker/daemon.json, which if it
does not exist initially will create this as a directory (causing lots
of confusion and breaks).
PiperOrigin-RevId: 343932456
|
|
This function does not exist in Go 1.13. We need to add an adaptor
to build against Go 1.13, which is the default Ubuntu version.
PiperOrigin-RevId: 343929132
|