summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2020-12-21Prefer matching labels and longest matching prefixGhanan Gowripalan
...when performing source address selection for IPv6. These are defined in RFC 6724 section 5 rule 6 (prefer matching label) and rule 8 (use longest matching prefix). This change also considers ULA of global scope instead of its own scope, as per RFC 6724 section 3.1: Also, note that ULAs are considered as global, not site-local, scope but are handled via the prefix policy table as discussed in Section 10.6. Test: stack_test.TestIPv6SourceAddressSelectionScope Startblock: has LGTM from peterjohnston and then add reviewer brunodalbo PiperOrigin-RevId: 348580996
2020-12-21Don't modify a packet header when it can be used by other endpointsAndrei Vagin
Reported-by: syzbot+48c43f82fe7738fceae9@syzkaller.appspotmail.com PiperOrigin-RevId: 348540796
2020-12-21RLock Endpoint in raw.Endpoint.HandlePacketKevin Krakauer
PiperOrigin-RevId: 348530530
2020-12-17Typo fix.Etienne Perot
PiperOrigin-RevId: 348106699
2020-12-17Set verityMu to be state nosaveChong Cai
PiperOrigin-RevId: 348092999
2020-12-17Internal change.gVisor bot
PiperOrigin-RevId: 348089449
2020-12-17Set --nocache_test_results to runtime testsFabricio Voznika
If not set, the cached result is used even when runtime options are changed, because they are not visible to blaze/bazel. PiperOrigin-RevId: 348074339
2020-12-17Fix seek on /proc/pid/cmdline when task is zombie.Nicolas Lacasse
PiperOrigin-RevId: 348056159
2020-12-17[netstack] Implement IP(V6)_RECVERR socket option.Ayush Ranjan
PiperOrigin-RevId: 348055514
2020-12-17Set process group and session on host TTYFabricio Voznika
Closes #5128 PiperOrigin-RevId: 348052446
2020-12-17Add sandbox ID to state file nameFabricio Voznika
This allows to find all containers inside a sandbox more efficiently. This operation is required every time a container starts and stops, and previously required loading *all* container state files to check whether the container belonged to the sandbox. Apert from being inneficient, it has caused problems when state files are stale or corrupt, causing inavalability to create any container. Also adjust commands `list` and `debug` to skip over files that fail to load. Resolves #5052 PiperOrigin-RevId: 348050637
2020-12-17Set max memory not minFabricio Voznika
Closes #5048 PiperOrigin-RevId: 348050472
2020-12-17[netstack] Implement MSG_ERRQUEUE flag for recvmsg(2).Ayush Ranjan
Introduces the per-socket error queue and the necessary cmsg mechanisms. PiperOrigin-RevId: 348028508
2020-12-17Remove duplicate `return`Tamir Duberstein
PiperOrigin-RevId: 347974624
2020-12-16Cleanup locking in multicast group protocol testsGhanan Gowripalan
Startblock: has LGTM from asfez and then add reviewer tamird PiperOrigin-RevId: 347928471
2020-12-16Automated rollback of changelist 346565589gVisor bot
PiperOrigin-RevId: 347911316
2020-12-16Merge pull request #4880 from lubinszARM:pr_tlbi_02gVisor bot
PiperOrigin-RevId: 347890782
2020-12-16Add support to count the number of packets SACKed.Nayana Bidari
sacked_out is required in RACK to check the number of duplicate acknowledgements during updating the reorder window. If there is no reordering and the value for sacked_out is greater than the classic threshold value 3, then reorder window is set to zero. It is calculated by counting the number of segments sacked in the ACK and is reduced when a cumulative ACK is received which covers the SACK blocks. This value is set to zero when the connection enters recovery. PiperOrigin-RevId: 347872246
2020-12-16Restore refresh target.Adin Scannell
PiperOrigin-RevId: 347864621
2020-12-16Ensure correctness of saved receive windowMithun Iyer
When the scaled receive window size > 65535 (max uint16), we advertise the scaled value as 65535, but are not adjusting the saved receive window value when doing so. This would keep our current window calculation logic to be incorrect, as the saved receive window value is different from what was advertised. Fixes #4903 PiperOrigin-RevId: 347771340
2020-12-15Validate router alert's data lengthGhanan Gowripalan
RFC 2711 specifies that the router alert's length field is always 2 so we should make sure only 2 bytes are read from a router alert option's data field. Test: header.TestIPv6OptionsExtHdrIterErr PiperOrigin-RevId: 347727876
2020-12-15Internal change.Andrei Vagin
PiperOrigin-RevId: 347720083
2020-12-15Don't split enabled flag across multicast group stateGhanan Gowripalan
Startblock: has LGTM from asfez and then add reviewer brunodalbo PiperOrigin-RevId: 347716242
2020-12-15Implement command SEM_INFO and SEM_STAT for semctl.Jing Chen
PiperOrigin-RevId: 347711998
2020-12-15Change violation mode to an enumChong Cai
PiperOrigin-RevId: 347706953
2020-12-15[syzkaller] Avoid AIOContext from resurrecting after being marked dead.Ayush Ranjan
syzkaller reported the closing of a nil channel. This is only possible when the AIOContext was destroyed twice. Some scenarios that could lead to this: - It died and then some called aioCtx.Prepare() on it and then killed it again which could cause the double destroy. The context could have been destroyed in between the call to LookupAIOContext() and Prepare(). - aioManager was destroyed but it did not update the contexts map. So Lookup could still return a dead AIOContext and then someone could call Prepare on it and kill it again. So added a check in aioCtx.Prepare() for the context being dead. This will prevent a dead context from resurrecting. Also refactored code to destroy the aioContext consistently. Earlier we were not munmapping the aioContexts that were destroyed upon aioManager destruction. Reported-by: syzbot+ef6a588d0ce6059991d2@syzkaller.appspotmail.com PiperOrigin-RevId: 347704347
2020-12-15[netstack] Make recvmsg(2) call to host in hostinet even if dst is empty.Ayush Ranjan
We want to make the recvmsg syscall to the host regardless of if the dst is empty or not so that: - Host can populate the control messages if necessary. - Host can return sender address. - Host can return appropriate errors. Earlier because we were using the IOSequence.CopyOutFrom() API, the usermem package does not even call the Reader function if the destination is empty (as an optimization). PiperOrigin-RevId: 347684566
2020-12-15Internal change.gVisor bot
PiperOrigin-RevId: 347671070
2020-12-15fsgofer optimizationsFabricio Voznika
- Skip chown call in case owner change is not needed - Skip filepath.Clean() calls when joining paths - Pass unix.Stat_t by value to reduce runtime.duffcopy calls. This change allows for better inlining in localFile.walk(). Change Baseline Improvement BenchmarkWalkOne-6 2912 ns/op 3082 ns/op 5.5% BenchmarkCreate-6 15915 ns/op 19126 ns/op 16.8% BenchmarkCreateDiffOwner-6 18795 ns/op 19741 ns/op 4.8% PiperOrigin-RevId: 347667833
2020-12-15Merge pull request #4722 from zhlhahaha:2010gVisor bot
PiperOrigin-RevId: 347660920
2020-12-15Fix error code for connect in raw sockets.Nayana Bidari
PiperOrigin-RevId: 347650354
2020-12-15Cleanup GitHub actions workflows.Adin Scannell
Also, drop the pull_request template, since this has not proved to be helpful, and just results in a commit message the includes the list. PiperOrigin-RevId: 347636507
2020-12-15Fix a data race in packetEPsTing-Yu Wang
packetEPs may get into a state that `len < cap`, casuing append() modifying the original slice storage. Reported-by: syzbot+978dd0e9c2600ab7a76b@syzkaller.appspotmail.com PiperOrigin-RevId: 347634351
2020-12-14Update containerd/cgroupsFabricio Voznika
PiperOrigin-RevId: 347532687
2020-12-14[netstack] Update raw socket and hostinet control message parsing.Ayush Ranjan
There are surprisingly few syscall tests that run with hostinet. For example running the following command only returns two results: `bazel query test/syscalls:all | grep hostnet` I think as a result, as our control messages evolved, hostinet was left behind. Update it to support all control messages netstack supports. This change also updates sentry's control message parsing logic to make it up to date with all the control messages we support. PiperOrigin-RevId: 347508892
2020-12-14Move SO_LINGER option to socketops.Nayana Bidari
PiperOrigin-RevId: 347437786
2020-12-14Do not check for reference leaks after saving.Dean Deng
We should not assert that all resources are dropped after saving. PiperOrigin-RevId: 347420131
2020-12-14Move SO_ERROR and SO_OOBINLINE option to socketops.Nayana Bidari
SO_OOBINLINE option is set/get as boolean value, which is the same as linux. As we currently do not support disabling this option, we always return it as true. PiperOrigin-RevId: 347413905
2020-12-12Reduce the memory overhead in IP fragment managementToshi Kikuchi
- Deep-copy pkt.Data and hold it instead of shallow-copy (vv.Clone). This allows the pkt's backing array, which includes the header portion, to be freed. - Remove fragHeap. The fragments are now held in holes struct instead. - Stop reserving the initial capacity of holes slice. PiperOrigin-RevId: 347198744
2020-12-12Introduce IPv6 extension header serialization facilitiesBruno Dal Bo
Adds IPv6 extension header serializer and Hop by Hop options serializer. Add RouterAlert option serializer and use it in MLD. Fixed #4996 Startblock: has LGTM from marinaciocea and then add reviewer ghanan PiperOrigin-RevId: 347174537
2020-12-11Fix long running bazel build jobs.Zach Koopmans
- Skip the bazel clean command on the last run of the benchmark. - Use --test.benchtime=1ns to force running the benchmark once (https://github.com/golang/go/issues/32051) PiperOrigin-RevId: 347124606
2020-12-11Internal change.gVisor bot
PiperOrigin-RevId: 347091372
2020-12-11Make fixes to vfs2 leak checking.Dean Deng
PiperOrigin-RevId: 347089828
2020-12-11Add runsc symbolize command.Dean Deng
This command takes instruction pointers from stdin and converts them into their corresponding file names and line/column numbers in the runsc source code. The inputs are not interpreted as actual addresses, but as synthetic values that are exposed through /sys/kernel/debug/kcov. One can extract coverage information from kcov and translate those values into locations in the source code by running symbolize on the same runsc binary. This will allow us to generate syzkaller coverage reports. PiperOrigin-RevId: 347089624
2020-12-11Fix panic when IPv4 address is used in sendmsg for IPv6 socketsNayana Bidari
We do not rely on error for getsockopt options(which have boolean values) anymore. This will cause issue in sendmsg where we used to return error for IPV6_V6Only option. Fix the panic by returning error (for sockets other than TCP and UDP) if the address does not match the type(AF_INET/AF_INET6) of the socket. PiperOrigin-RevId: 347063838
2020-12-11Fix run and sudo targets.Adin Scannell
These are not passing arguments properly. This breaks the current pre-command for BuildKite. PiperOrigin-RevId: 347062729
2020-12-11Adjust requests to be constant equal to b.N in network tests.Zach Koopmans
For "hey", requests >= concurrency. b.N can be set by the --test.benchtime={b.N}x. The previous setting of b.N * c can be surprisingly slow for larger c. Set the requests to max(b.N, c) and log to the user if it is c. PiperOrigin-RevId: 347053675
2020-12-11Remove existing nogo exceptions.Adin Scannell
PiperOrigin-RevId: 347047550
2020-12-11Add local hooks for BuildKite.Adin Scannell
PiperOrigin-RevId: 347044353
2020-12-11Fix parser to include iterations.Zach Koopmans
PiperOrigin-RevId: 347038652
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-30 07:10:42 +0000