summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2020-05-01Regenerate SLAAC address on conflicts with the NICGhanan Gowripalan
If the NIC already has a generated SLAAC address, regenerate a new SLAAC address until one is generated that does not conflict with the NIC's existing addresses, up to a maximum of 10 attempts. This applies to both stable and temporary SLAAC addresses. Test: stack_test.TestMixedSLAACAddrConflictRegen PiperOrigin-RevId: 309495628
2020-05-01Automated rollback of changelist 308674219Kevin Krakauer
PiperOrigin-RevId: 309491861
2020-05-01Internal change.gVisor bot
PiperOrigin-RevId: 309467878
2020-05-01Port netstack, hostinet, and netlink sockets to VFS2.Dean Deng
All three follow the same pattern: 1. Refactor VFS1 sockets into socketOpsCommon, so that most of the methods can be shared with VFS2. 2. Create a FileDescriptionImpl with the corresponding socket operations, rewriting the few that cannot be shared with VFS1. 3. Set up a VFS2 socket provider that creates a socket by setting up a dentry in the global Kernel.socketMount and connecting it with a new FileDescription. This mostly completes the work for porting sockets to VFS2, and many syscall tests can be enabled as a result. There are several networking-related syscall tests that are still not passing: 1. net gofer tests 2. socketpair gofer tests 2. sendfile tests (splice is not implemented in VFS2 yet) Updates #1478, #1484, #1485 PiperOrigin-RevId: 309457331
2020-04-30Enable FIFO QDisc by default in runsc.Bhasker Hariharan
Updates #231 PiperOrigin-RevId: 309339316
2020-04-30FIFO QDisc implementationBhasker Hariharan
Updates #231 PiperOrigin-RevId: 309323808
2020-04-30Add gofer.InternalFilesystemOptions.LeakConnection.Jamie Liu
PiperOrigin-RevId: 309317605
2020-04-30Implement waiter.Waitable methods on VFS2 host inodes.Nicolas Lacasse
This fixes bash in Ubuntu. Updates #1672. PiperOrigin-RevId: 309298252
2020-04-30Allow to run kvm syscall tests on the RBE clusterAndrei Vagin
PiperOrigin-RevId: 309265978
2020-04-30Prefer temporary addressesGhanan Gowripalan
Implement rule 7 of Source Address Selection RFC 6724 section 5. This makes temporary (short-lived) addresses preferred over non-temporary addresses when earlier rules are equal. Test: stack_test.TestIPv6SourceAddressSelectionScopeAndSameAddress PiperOrigin-RevId: 309250975
2020-04-30Fix proc net bugs in VFS2.Dean Deng
The /proc/net/udp header was missing, and /proc/sys/net was set up as /proc/sys/net/net. Discovered while trying to run networking tests for VFS2. PiperOrigin-RevId: 309243758
2020-04-30Make tcp_close_wait_ack_test more accurateZeling Feng
Previously the test used an out-dated window size which is advertised during the handshake to generate testing packets, but the window size has changed since the handshake; currently it is using the most recent one which is advertised in DUT's ACK to our FIN packet to generate the testing outside-the-window packets. PiperOrigin-RevId: 309222921
2020-04-30make_repository.sh has to print only the repo path on stdoutAndrei Vagin
PiperOrigin-RevId: 309176385
2020-04-29Add read/write timeouts for VFS2 socket files.Dean Deng
Updates #1476 PiperOrigin-RevId: 309098590
2020-04-29iptables: don't pollute logsKevin Krakauer
The netfilter package uses logs to make debugging the (de)serialization of structs easier. This generates a lot of (usually irrelevant) logs. Logging is now hidden behind a debug flag. PiperOrigin-RevId: 309087115
2020-04-29Merge pull request #2487 from moricho:fix/bindmountgVisor bot
PiperOrigin-RevId: 309082540
2020-04-28Fix Unix socket permissions.Dean Deng
Enforce write permission checks in BoundEndpointAt, which corresponds to the permission checks in Linux (net/unix/af_unix.c:unix_find_other). Also, create bound socket files with the correct permissions in VFS2. Fixes #2324. PiperOrigin-RevId: 308949084
2020-04-28Internal change.gVisor bot
PiperOrigin-RevId: 308940886
2020-04-28Deduplicate unix socket Release() method.Dean Deng
PiperOrigin-RevId: 308932254
2020-04-28Support IPv6 Privacy Extensions for SLAACGhanan Gowripalan
Support generating temporary (short-lived) IPv6 SLAAC addresses to address privacy concerns outlined in RFC 4941. Tests: - stack_test.TestAutoGenTempAddr - stack_test.TestNoAutoGenTempAddrForLinkLocal - stack_test.TestAutoGenTempAddrRegen - stack_test.TestAutoGenTempAddrRegenTimerUpdates - stack_test.TestNoAutoGenTempAddrWithoutStableAddr - stack_test.TestAutoGenAddrInResponseToDADConflicts PiperOrigin-RevId: 308915566
2020-04-28Use existing bazeldefs with top-level BUILD file.Adin Scannell
PiperOrigin-RevId: 308901116
2020-04-28Don't unlink named pipes in pipe test.Jamie Liu
TempPath's destructor runs at the end of the named pipe creation functions, deleting the named pipe. If the named pipe is backed by a "non-virtual" filesystem (!fs.Inode.IsVirtual()), this causes the following save attempt to fail because there are FDs holding the deleted named pipe open. PiperOrigin-RevId: 308861999
2020-04-28Merge pull request #2558 from prattmic:forward_signalgVisor bot
PiperOrigin-RevId: 308829800
2020-04-28Support pipes and sockets in VFS2 gofer fs.Dean Deng
Named pipes and sockets can be represented in two ways in gofer fs: 1. As a file on the remote filesystem. In this case, all file operations are passed through 9p. 2. As a synthetic file that is internal to the sandbox. In this case, the dentry stores an endpoint or VFSPipe for sockets and pipes respectively, which replaces interactions with the remote fs through the gofer. In gofer.filesystem.MknodAt, we attempt to call mknod(2) through 9p, and if it fails, fall back to the synthetic version. Updates #1200. PiperOrigin-RevId: 308828161
2020-04-27Merge pull request #2544 from prattmic:runsc_do_cleanupgVisor bot
PiperOrigin-RevId: 308727526
2020-04-27Import host sockets.Dean Deng
The FileDescription implementation for hostfs sockets uses the standard Unix socket implementation (unix.SocketVFS2), but is also tied to a hostfs dentry. Updates #1672, #1476 PiperOrigin-RevId: 308716426
2020-04-27Reduce flakiness in tcp_test.Bhasker Hariharan
Poll for metric updates as immediately trying to read them can sometimes be flaky if due to goroutine scheduling the check happens before the sender has got a chance to update the corresponding sent metric. PiperOrigin-RevId: 308712817
2020-04-27Merge pull request #2557 from cmingxu:mastergVisor bot
PiperOrigin-RevId: 308706483
2020-04-27runsc: extend do network cleanupMichael Pratt
Previously we unconditionally failed to cleanup the networking files (hostname, resolve.conf, hosts), and failed to cleanup the netns, etc on partial setup failure. We can drop the iptables commands from cleanup, as the routes automatically go away when the device is deleted. Those commands were failing previously. Forward signals to the container, allowing it to exit normally when a signal is received, and then for runsc to run the cleanup. This doesn't cover cleanup when runsc is signalled before the container start, it covers the most common case. Fixes #2539 Fixes #2540
2020-04-27Dump stack for stuck start and stuck watchdogFabricio Voznika
The meaning for skipDump was reversed, but not all callers were updated. Change the meaning once again to forceDump, so that the period between stack dump is respected from all callers. PiperOrigin-RevId: 308674373
2020-04-27Automated rollback of changelist 308163542gVisor bot
PiperOrigin-RevId: 308674219
2020-04-27container: use sighandling packageMichael Pratt
Use the sighandling package for Container.ForwardSignals, for consistency with other signal forwarding. Fixes #2546
2020-04-27Don't leak vfs.MountNamespace reference if kernel.TaskSet.NewTask fails.Jamie Liu
PiperOrigin-RevId: 308617610
2020-04-27Update container.gokevin.xu
typo, should be `start` in comments
2020-04-27Merge pull request #1 from google/masterkevin.xu
catch up
2020-04-26refactor and add test for bindmountmoricho
Signed-off-by: moricho <ikeda.morito@gmail.com>
2020-04-25Enable automated marshalling for signals and the arch package.Rahat Mahmood
PiperOrigin-RevId: 308472331
2020-04-25Add container tests passing with VFS2Zach Koopmans
Several tests are passing after getting TestAppExitStatus (run /bin/true) changes. Make versions that run via VFS2 so that we know what is and isn't working. In addition, fix bug in VFSFile ReadFull. For the TestExePath test in container_test.go, the case "unmasked" will return 0 bytes read with no EOF err, causing the ReadFull call to spin. PiperOrigin-RevId: 308428126
2020-04-25add bind/rbind options for mountmoricho
Signed-off-by: moricho <ikeda.morito@gmail.com>
2020-04-25fix behavior of `getMountNameAndOptions` when options include either bind or ↵moricho
rbind Signed-off-by: moricho <ikeda.morito@gmail.com>
2020-04-24More descriptive error message for missing docker image.Eyal Soha
Tested: Ran a packetimpact test after `docker image rm` and examined the message. PiperOrigin-RevId: 308370603
2020-04-24VFS2: Get HelloWorld image tests to pass with VFS2Zach Koopmans
This change includes: - Modifications to loader_test.go to get TestCreateMountNamespace to pass with VFS2. - Changes necessary to get TestHelloWorld in image tests to pass with VFS2. This means runsc can run the hello-world container with docker on VSF2. Note: Containers that use sockets will not run with these changes. See "//test/image/...". Any tests here with sockets currently fail (which is all of them but HelloWorld). PiperOrigin-RevId: 308363072
2020-04-24Propagate PID limit from OCI to sandbox cgroupFabricio Voznika
Closes #2489 PiperOrigin-RevId: 308362434
2020-04-24Merge pull request #1707 from lubinszARM:pr_lazy_fpsimd_2gVisor bot
PiperOrigin-RevId: 308347744
2020-04-24Add ICMP6 param problem testEyal Soha
Tested: When run on Linux, a correct ICMPv6 response is received. On netstack, no ICMPv6 response is received. PiperOrigin-RevId: 308343113
2020-04-24Better error message from ExpectFrameEyal Soha
Display the errors as diffs between the expected and wanted frame. PiperOrigin-RevId: 308333271
2020-04-24Improve and update packetimpact README.mdEyal Soha
PiperOrigin-RevId: 308328860
2020-04-24Standardize all Docker images.Adin Scannell
This change moves all Docker images to a standard location, and abstracts the build process so that they can be maintained in an automated fashion. This also allows the images to be architecture-independent. All images will now be referred to by the test framework via the canonical `gvisor.dev/images/<name>`, where `<name>` is a function of the path within the source tree. In a subsequent change, continuous integration will be added so that the images will always be correct and available locally. In the end, using `bazel` for Docker containers is simply not possible. Given that we already have the need to use `make` with the base container (for Docker), we extend this approach to get more flexibility. This change also adds a self-documenting and powerful Makefile that is intended to replace the collection of scripts in scripts. Canonical (self-documenting) targets can be added here for targets that understand which images need to be loaded and/or built. PiperOrigin-RevId: 308322438
2020-04-24Port SCM Rights to VFS2.Dean Deng
Fixes #1477. PiperOrigin-RevId: 308317511
2020-04-24kokoro: save all files from test.outputs/Andrei Vagin
If a test fails by timeout, bazel doesn't generate outputs.zip. PiperOrigin-RevId: 308307815
generated by cgit v1.2.3 (git 2.39.1) at 2024-12-26 14:41:24 +0000