Age | Commit message (Collapse) | Author |
|
Go profiling was removed from runsc debug in a previous change.
PiperOrigin-RevId: 328203826
|
|
This enables pre-release testing with 1.16. The intention is to replace these
with a nogo check before the next release.
PiperOrigin-RevId: 328193911
|
|
When a loopback interface is configurd with an address and associated
subnet, the loopback should treat all addresses in that subnet as an
address it owns.
This is mimicking linux behaviour as seen below:
```
$ ip addr show dev lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ...
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
$ ping 192.0.2.1
PING 192.0.2.1 (192.0.2.1) 56(84) bytes of data.
^C
--- 192.0.2.1 ping statistics ---
2 packets transmitted, 0 received, 100% packet loss, time 1018ms
$ ping 192.0.2.2
PING 192.0.2.2 (192.0.2.2) 56(84) bytes of data.
^C
--- 192.0.2.2 ping statistics ---
3 packets transmitted, 0 received, 100% packet loss, time 2039ms
$ sudo ip addr add 192.0.2.1/24 dev lo
$ ip addr show dev lo
1: lo: <LOOPBACK,UP,LOWER_UP> mtu 65536 qdisc noqueue state UNKNOWN group ...
link/loopback 00:00:00:00:00:00 brd 00:00:00:00:00:00
inet 127.0.0.1/8 scope host lo
valid_lft forever preferred_lft forever
inet 192.0.2.1/24 scope global lo
valid_lft forever preferred_lft forever
inet6 ::1/128 scope host
valid_lft forever preferred_lft forever
$ ping 192.0.2.1
PING 192.0.2.1 (192.0.2.1) 56(84) bytes of data.
64 bytes from 192.0.2.1: icmp_seq=1 ttl=64 time=0.131 ms
64 bytes from 192.0.2.1: icmp_seq=2 ttl=64 time=0.046 ms
64 bytes from 192.0.2.1: icmp_seq=3 ttl=64 time=0.048 ms
^C
--- 192.0.2.1 ping statistics ---
3 packets transmitted, 3 received, 0% packet loss, time 2042ms
rtt min/avg/max/mdev = 0.046/0.075/0.131/0.039 ms
$ ping 192.0.2.2
PING 192.0.2.2 (192.0.2.2) 56(84) bytes of data.
64 bytes from 192.0.2.2: icmp_seq=1 ttl=64 time=0.131 ms
64 bytes from 192.0.2.2: icmp_seq=2 ttl=64 time=0.069 ms
64 bytes from 192.0.2.2: icmp_seq=3 ttl=64 time=0.049 ms
64 bytes from 192.0.2.2: icmp_seq=4 ttl=64 time=0.035 ms
^C
--- 192.0.2.2 ping statistics ---
4 packets transmitted, 4 received, 0% packet loss, time 3049ms
rtt min/avg/max/mdev = 0.035/0.071/0.131/0.036 ms
```
Test: integration_test.TestLoopbackAcceptAllInSubnet
PiperOrigin-RevId: 328188546
|
|
We now allow hard links to be created within gofer fs (see
github.com/google/gvisor/commit/f20e63e31b56784c596897e86f03441f9d05f567).
Update the inotify documentation accordingly.
PiperOrigin-RevId: 328177485
|
|
PiperOrigin-RevId: 328157101
|
|
verity GetFilesystem is implemented by mounting the underlying file
system, save the mount, and store both the underlying root dentry and
root Merkle file dentry in verity's root dentry.
PiperOrigin-RevId: 327959334
|
|
Add tests for socket re-bind/listen of client and server sockets
with the older connection still in TIME_WAIT state and with
SO_REUSEADDR enabled.
PiperOrigin-RevId: 327924702
|
|
Unlike linux mount(2), OCI spec allows mounting on top of an existing
non-directory file.
PiperOrigin-RevId: 327914342
|
|
PiperOrigin-RevId: 327902182
|
|
fdReader/Writer implements io.Reader/Writer so that they can be passed
to Merkle tree library.
PiperOrigin-RevId: 327901376
|
|
It frequently times out under GoTSAN.
PiperOrigin-RevId: 327894343
|
|
PiperOrigin-RevId: 327892274
|
|
- Remove comment about GenericDirectoryFD not being compatible with
dynamic directories. It is currently being used to implement dynamic
directories.
- Try to handle SEEK_END better than setting the offset to
infinity. SEEK_END is poorly defined for dynamic directories
anyways, so at least try make it work correctly for the static
entries.
Updates #1193.
PiperOrigin-RevId: 327890128
|
|
Some VFS operations (those which operate on FDs) get their credentials via the
context instead of via an explicit creds param. For these cases, we must pass
the overlay credentials on the context.
PiperOrigin-RevId: 327881259
|
|
This lets us create "synthetic" mountpoint directories in ReadOnly mounts
during VFS setup.
Also add context.WithMountNamespace, as some filesystems (like overlay) require
a MountNamespace on ctx to handle vfs.Filesystem Operations.
PiperOrigin-RevId: 327874971
|
|
The order of unlink events (dir event/file event) is undefined,
so make tests accept both orderings.
PiperOrigin-RevId: 327873316
|
|
It was not properly creating recursive directories. Added tests for this case.
Updates #1196
PiperOrigin-RevId: 327850811
|
|
gVisor emulates 4.6 kernel versions, and test doesn't work on 5.0 versions
(observed on our Ubuntu18.04 image). Skip it.
PiperOrigin-RevId: 327845037
|
|
They time out.
PiperOrigin-RevId: 327830892
|
|
Refactored the recursive dir creation util in runsc/boot/vfs.go to be more
flexible.
PiperOrigin-RevId: 327719100
|
|
This is done to ease troubleshooting when tests fail. runsc
logs are not stored when tests passe, so this will only
affect failing tests and should not increase log storage
too badly.
PiperOrigin-RevId: 327717551
|
|
PiperOrigin-RevId: 327711264
|
|
Includes a minor refactor for inode construction.
Updates #1486.
PiperOrigin-RevId: 327694933
|
|
Our "Preconditions:" blocks are very useful to determine the input invariants,
but they are bit inconsistent throughout the codebase, which makes them harder
to read (particularly cases with 5+ conditions in a single paragraph).
I've reformatted all of the cases to fit in simple rules:
1. Cases with a single condition are placed on a single line.
2. Cases with multiple conditions are placed in a bulleted list.
This format has been added to the style guide.
I've also mentioned "Postconditions:", though those are much less frequently
used, and all uses already match this style.
PiperOrigin-RevId: 327687465
|
|
PiperOrigin-RevId: 327686558
|
|
As per RFC 8200 Section 4.5:
The Next Header field of the last header of the Per-Fragment
headers is obtained from the Next Header field of the first
fragment's Fragment header.
Test:
- pkg/tcpip/network/ipv6:ipv6_test
- pkg/tcpip/network/ipv4:ipv4_test
- pkg/tcpip/network/fragmentation:fragmentation_test
Updates #2197
PiperOrigin-RevId: 327671635
|
|
PiperOrigin-RevId: 327659759
|
|
PiperOrigin-RevId: 327654207
|
|
Updates #3494
PiperOrigin-RevId: 327548511
|
|
Replace mknod call with mknodat equivalent to protect
against symlink attacks. Also added Mknod tests.
Remove goferfs reliance on gofer to check for file
existence before creating a synthetic entry.
Updates #2923
PiperOrigin-RevId: 327544516
|
|
bazel creates sysmlink to the cache on the first invokation.
On a new clone, there are no symlink, thus `rm -rf bazel-bin/gopath`
has no effect. Call `bazel build something` first, then delete
cached gopath.
PiperOrigin-RevId: 327536044
|
|
Accept 128 + SIGNAL as well as SIGNAL as valid
returns for fork/exec tests.
Also, make changes so that test compiles in opensource. Test
had compile errors on latest Ubuntu 16.04 image with updated bazel to
3.4.0 (as well as base 2.0) used for Kokoro tests.
PiperOrigin-RevId: 327510310
|
|
A later change will introduce the equivalent IPv6 logic.
#3549
PiperOrigin-RevId: 327499064
|
|
Tests that we have the correct initial (empty) state for ip6tables.
#3549
PiperOrigin-RevId: 327477657
|
|
- Remove sendDone, which currently does nothing whatsoever (errors sent to the
channel are completely unused). Instead, have request handlers log errors
they get from p9.send() inline.
- Replace recvOkay and recvDone with recvMu/recvIdle/recvShutdown. In addition
to being slightly clearer (IMO), this eliminates the p9.connState.service()
goroutine, significantly reducing the overhead involved in passing connection
receive access between goroutines (from buffered chan send/recv + unbuffered
chan send/recv to just a mutex unlock/lock).
PiperOrigin-RevId: 327476755
|
|
Stolen from cl/327337408 (ascannell is OOO)
PiperOrigin-RevId: 327475423
|
|
Skip check for ECN bits in native/linux tests. General advice
for the ECN field is to leave the setting to the kernel, so
behavior of the test is undefined for different kernels.
http://www.masterraghu.com/subjects/np/introduction/unix_network_programming_v1.3/ch07lev1sec6.html
PiperOrigin-RevId: 327451414
|
|
test_eintr now passes in the Python runtime tests.
Updates #3515.
PiperOrigin-RevId: 327441081
|
|
Some character and block devices can be seekable. So allow their FD to maintain
file offset.
PiperOrigin-RevId: 327370684
|
|
This interface method is unneeded.
PiperOrigin-RevId: 327370325
|
|
This is needed to avoid circular dependencies between the vfs and kernel
packages.
PiperOrigin-RevId: 327355524
|
|
Updates #1035
PiperOrigin-RevId: 327351475
|
|
PiperOrigin-RevId: 327351357
|
|
Some machines return 128 + signal for failures. Accept that
as a valid result.
PiperOrigin-RevId: 327326113
|
|
RACK requires the segments to be in the order of their transmission
or retransmission times. This cl creates a new list and moves the
retransmitted segments to the end of the list.
PiperOrigin-RevId: 327325153
|
|
Fixes #3243, #3521
PiperOrigin-RevId: 327308890
|
|
PiperOrigin-RevId: 327300635
|
|
tv_usec field should be a multiple of 4K to pass
in open source on linux/native, so make it one.
PiperOrigin-RevId: 327288405
|
|
... including those invoked via flipcall.
PiperOrigin-RevId: 327283194
|
|
Updates #1035
PiperOrigin-RevId: 327253907
|