| Age | Commit message (Collapse) | Author |
|---|
|
Originally we were making a WalkGetAttrOne RPC to confirm that a file does not
exist on the remote filesystem - when there was no cached information about the
existence of a dentry at that position.
This change avoids making that RPC and speculatively makes the
mkdir/mknod/linkat/symlink RPC. They will fail with EEXIST if a file exists at
that position as we want.
However the error ordering is important. Existence check comes before
writability check. So we make the existence check when the writability check
fails and give it precedence.
This change saves ~76,000 RPCs while building //absl/... (ABSL build benchmark).
That is 10% of all RPCs made while running that workload.
PiperOrigin-RevId: 371225633
|
|
PiperOrigin-RevId: 371216407
|
|
PiperOrigin-RevId: 371198372
|
|
... it may now invalidate backing slice references
This is currently safe because TrimFront() in VectorisedView only shrinks the
view. This may not hold under the a different buffer implementation.
Reordering method calls order to allow this.
PiperOrigin-RevId: 371167610
|
|
PiperOrigin-RevId: 371163405
|
|
PiperOrigin-RevId: 371131985
|
|
PiperOrigin-RevId: 371015541
|
|
Fixes #5170
PiperOrigin-RevId: 371007691
|
|
Restore capabilities for tests that need to change them.
PiperOrigin-RevId: 371007047
|
|
PiperOrigin-RevId: 370989166
|
|
Co-Author: ayushranjan
PiperOrigin-RevId: 370785009
|
|
PiperOrigin-RevId: 370733869
|
|
The newly added Weirdness metric with fields should be used instead of them.
Simple query for weirdness metric: http://shortn/_DGNk0z2Up6
PiperOrigin-RevId: 370578132
|
|
PiperOrigin-RevId: 370569000
|
|
PiperOrigin-RevId: 370565903
|
|
This is a suite of changes intended to dramatically speed up nogo speed.
First, there are minor changes that help efficiency significantly.
* Gob-based encoding is used internally, and JSON only used for the final
set of findings. This is done to preserve the existing format (which is
consumed by external tooling), and to facilitate manual debugging.
* Unnecessary regex compilation is elided in the configuration, and care is
taken for merges to prevent redundant entries. I'm not sure quite sure how,
but it turns out that this was consumed a significant amount of time,
presumably compiling the same regexes over and over again.
Second, this change enables bazel workers for nogo analyzers.
Workers enable persistent processes instead of creating and tearing down a
sandbox every invocation. A library is introduced to abstraction these details,
and allow the tools to still be written using standard flags, etc.
The key here is that these binaries and the core of nogo become aware of
caches with worker.Cache. This allows us to save significant time loading the
same set of files and findings over and over again. These caches are keyed by
the digests that are provided by bazel, and are capped in overall size.
Note that the worker package attempts to capture output during each run, but
tools are no longer permitted to write to stdout. This necessitated dropping
some spurious output from checklocks.
PiperOrigin-RevId: 370505732
|
|
Signed-off-by: Howard Zhang <howard.zhang@arm.com>
|
|
PiperOrigin-RevId: 370219558
|
|
Presently, the standard library facts are not serialized in a deterministic
order. This means that they have the possibility to change on each iteration,
requiring a large scale re-analysis of all downstream actions, which includes
all packages.
Improve cache-ability of nogo actions by improving the determinism of the both
facts and findings. Internally, default facts should be serialized as a sorted
list for this reason already.
PiperOrigin-RevId: 370188259
|
|
PiperOrigin-RevId: 370181621
|
|
We already have blocking nogo tests which show all findings. This job was
building all nogo targets, and posting all the findings to GitHub as a check
run. Building nogo takes a while so we actually end up wasting a lot of time
doing redundant work.
This is aligned with our goal of moving away from GitHub actions to BuildKite
only.
PiperOrigin-RevId: 370134875
|
|
Dropping CAP_SYS_ADMIN and not restoring it causes
other tests to be skipped.
PiperOrigin-RevId: 370002644
|
|
PiperOrigin-RevId: 369993733
|
|
In https://github.com/google/gvisor/commit/f075522849fa a check to increase zero
to a minimum backlog length was removed from sys_socket.go to bring it in parity
with linux and then in tcp/endpoint.go we bump backlog by 1. But this broke
calling listen on a AF_UNIX socket w/ a zero backlog as in linux it does allow 1
connection even with a zero backlog.
This was caught by a php runtime test socket_abstract_path.phpt.
PiperOrigin-RevId: 369974744
|
|
Weirdness metric contains fields to track the number of clock fallback,
partial result and vsyscalls. This metric will avoid the overhead of
having three different metrics (fallbackMetric, partialResultMetric,
vsyscallCount).
PiperOrigin-RevId: 369970218
|
|
PiperOrigin-RevId: 369967629
|
|
PiperOrigin-RevId: 369909691
|
|
With this change, GSO options no longer needs to be passed around as
a function argument in the write path.
This change is done in preparation for a later change that defers
segmentation, and may change GSO options for a packet as it flows
down the stack.
Updates #170.
PiperOrigin-RevId: 369774872
|
|
PiperOrigin-RevId: 369758655
|
|
PiperOrigin-RevId: 369724358
|
|
PiperOrigin-RevId: 369686298
|
|
PiperOrigin-RevId: 369686285
|
|
If the host doesn't have TSC scaling feature, then scaling down TSC to
the lowest value will fail, and we will fall back to legacy logic
anyway, but we leave an ugly log message in host's kernel log.
kernel: user requested TSC rate below hardware speed
Instead, check for KVM_CAP_TSC_CONTROL when initializing KVM, and fall
back to legacy logic early if host's cpu doesn't support that.
Signed-off-by: Daniel Dao <dqminh89@gmail.com>
|
|
The gofer client's LRU cache has a default limit of 1000 dentries. Any attempt
to cache more dentries than that will make the LRU cache evict and destroy the
least recently used dentry. However, the eviction is expensive because it
requires holding fs.renameMu for writing - which in turn creates a lot of
contention. All filesystem operations that involve path traversal require
fs.renameMu for reading atleast.
Therefore, it is in our best interest to keep the cache small and clean.
When a dentry is inserted in the dentry tree, it grabs a ref on its parent for
its entire lifetime. Hence the parent is longer evictable (because refs > 0).
This change additionally calls checkCachingLocked on directories that have been
added to so that they can be removed from the LRU cache if needed.
This change implies that the LRU cache will only contain the leaves from the
filesystem tree which significantly reduces the LRU cache size and consequently
reduces the number of expensive LRU cache evictions.
> Why are opened dentries not removed from LRU cache?
When a file description is open(2)-ed, the file description holds a ref on its
dentry for its entire lifetime. However, calling checkCachingLocked() on opened
dentries actually ends up hurting performance. Applications usually open file
descriptors for a short duration. So upon close(2), the dentry is reinserted
into the cache anyway. So the precautionary work done in removing the opened
dentry from the cache went for waste as it did not really reduce an eviction.
Local benchmarking has shown that this change improves performance by 3-4%.
Across 6 runs, without this change it took 296.127 seconds to build runsc while
with this change it took only 285.136 seconds.
PiperOrigin-RevId: 369510494
|
|
PiperOrigin-RevId: 369505182
|
|
Remote revalidating requires to update file size on every write
on a file opened with O_APPEND. If host FD exists, it can be
used to update the size and skip round trip to the gofer. With
this change, O_APPEND writes with remote revalidating is almost
as fast as exclusive mode:
BM_Append
VFS1 60.7us
VFS2 56.8us
VFS2 exclusive 14.2us
This change 15.8us
Updates #1792
PiperOrigin-RevId: 369486801
|
|
Fixes #2926, #674
PiperOrigin-RevId: 369457123
|
|
This is done for IPv4, UDP and TCP headers.
This also changes the packet checkers used in tests to error on
zero-checksum, not sure why it was allowed before.
And while I'm here, make comments' case consistent.
RELNOTES: n/a
Fixes #5049
PiperOrigin-RevId: 369383862
|
|
Currently the verity action is a global variable, which causes the same
action for all verity mounts, and is overwritten for each new verity
mount. Changed it to a member of verity fs.
PiperOrigin-RevId: 369348522
|
|
In the previous spot, there was a roughly 50% chance that leak checking would
actually run. Move it to the waitContainer() call on the root container, where
it is guaranteed to run before the sandbox process is terminated. Add it to
runsc/cli/main.go as well for good measure, in case the sandbox exit path does
not involve waitContainer().
PiperOrigin-RevId: 369329796
|
|
This change replaces individual private members in tcp.endpoint with a single
private TCPEndpointState member.
Some internal substructures within endpoint (receiver, sender) have been broken
into a public substructure (which is then copied into the TCPEndpointState
returned from completeState()) alongside other private fields.
Fixes #4466
PiperOrigin-RevId: 369329514
|
|
While using remote-validation, the vast majority of time spent during
FS operations is re-walking the path to check for modifications and
then closing the file given that in most cases it has not been
modified externally.
This change introduces a new 9P message called MultiGetAttr which bulks
query attributes of several files in one shot. The returned attributes are
then used to update cached dentries before they are walked. File attributes
are updated for files that still exist. Dentries that have been deleted are
removed from the cache. And negative cache entries are removed if a new
file/directory was created externally. Similarly, synthetic dentries are
replaced if a file/directory is created externally.
The bulk update needs to be carefull not to follow symlinks, cross mount
points, because the gofer doesn't know how to resolve symlinks and where
mounts points are located. It also doesn't walk to the parent ("..") to
avoid deadlocks.
Here are the results:
Workload VFS1 VFS2 Change
bazel action 115s 70s 28.8s
Stat/100 11,043us 7,623us 974us
Updates #1638
PiperOrigin-RevId: 369325957
|
|
- Added delay to increase the RTT: In DSACK tests with RACK enabled and low
RTT, TLP can be detected before sending ACK and the tests flake. Increasing
the RTT will ensure that TLP does not happen before the ACK is sent.
- Fix TestRACKOnePacketTailLoss: The ACK does not contain DSACK, which means
either the original or retransmission (probe) was lost and SACKRecovery count
must be incremented.
Before: http://sponge2/c9bd51de-f72f-481c-a7f3-e782e7524883
After: http://sponge2/1307a796-103a-4a45-b699-e8d239220ed1
PiperOrigin-RevId: 369305720
|
|
There is a loop that fills a byte array with zero-s. Let's use copy() instead
of setting elements one by one.
The new implementation is two time faster than the previous one and it is more
than 10x faster with the race detector.
Reported-by: syzbot+5f57d988a5f929af5a91@syzkaller.appspotmail.com
PiperOrigin-RevId: 369283919
|
|
This fixes a race that occurs while the endpoint is being unregistered
and the transport demuxer attempts to match the incoming packet to any
endpoint. The race specifically occurs when the unregistration (and
deletion of the endpoint) occurs, after a successful endpointsByNIC
lookup and before the endpoints map is further looked up with ingress
NICID of the packet.
The fix is to notify the caller of lookup-with-NICID failure, so that
the logic falls through to handling unknown destination packets.
For TCP this can mean replying back with RST.
The syscall test in this CL catches this race as the ACK completing the
handshake could get silently dropped on a listener close, causing no
RST sent to the peer and timing out the poll waiting for POLLHUP.
Fixes #5850
PiperOrigin-RevId: 369023779
|
|
Runsc build benchmark's mutex profile shows that we are wasting roughly 25-30
seconds waiting for filesystem.renameMu to get unlocked. Earlier
checkCachingLocked required the renameMu to be locked for writing. This is a
filesystem wide lock which puts all other filesystem operations on hold and
hence is really expensive. Something to note is that all path resolution
operations hold renameMu for reading.
With this change, we allow to check for caching without even holding renameMu.
This change introduces more fine grained locks (fs.cacheMu and dentry.cachingMu)
which protect the cache (removing the requirement to hold renameMu for writing
to modify the cache) and synchronize concurrent dentry caching attempts on a per
dentry basis. We still require to hold renameMu for writing while destroying
dentries and evicting from the cache but this still significantly reduces the
write locking critical section.
Local benchmarking showed that this improved runsc build benchmark time by 4-5%.
Across 6 runs, without this change it took 310.9025 seconds to build runsc
while with this change it took 296.127 seconds.
Runsc build benchmark's mutex profile: https://gvisor.dev/profile/gvisor-buildkite/78a3f968-36ca-4944-93f7-77a8792d56b4/28a1d260-790b-4a9e-94da-a4daede08ee3/tmp/profile/ptrace/BenchmarkBuildRunsc/page_cache.clean/filesystem.bindfs/benchmarks/runsc/mutex.pprof/flamegraph
PiperOrigin-RevId: 368958136
|
|
Add a coverage-report flag that will cause the sandbox to generate a coverage
report (with suffix .cov) in the debug log directory upon exiting. For the
report to be generated, runsc must have been built with the following Bazel
flags: `--collect_code_coverage --instrumentation_filter=...`.
With coverage reports, we should be able to aggregate results across all tests
to surface code coverage statistics for the project as a whole.
The report is simply a text file with each line representing a covered block
as `file:start_line.start_col,end_line.end_col`. Note that this is similar to
the format of coverage reports generated with `go test -coverprofile`,
although we omit the count and number of statements, which are not useful for
us.
Some simple ways of getting coverage reports:
bazel test <some_test> --collect_code_coverage \
--instrumentation_filter=//pkg/...
bazel build //runsc --collect_code_coverage \
--instrumentation_filter=//pkg/...
runsc -coverage-report=dir/ <other_flags> do ...
PiperOrigin-RevId: 368952911
|
|
gohacks.Memmove() takes in the number of bytes to move. The current generated
code passes len(src) and len(dst) as the number of bytes to move.
However, the marshal.Marshallable interface allows passing in larger buffers.
The stated precondition is that the buffer should be "at least" SizeBytes()
in length but it is allowed to be larger.
This change now correctly calls Memmove with the argument for the number of
bytes to move as type.SizeBytes(). This was caught when I made lisafs use the
Unsafe marshalling API and got a lot of memory violations.
PiperOrigin-RevId: 368952642
|
|
Also count failed TCP port allocations
PiperOrigin-RevId: 368939619
|
|
PiperOrigin-RevId: 368938936
|
