Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 346603153
|
|
Earlier we could not save tcpip.Error objects in structs because upon restore
the constant's address changes in netstack's error translation map and
translating the error would panic because the map is based on the address of the
tcpip.Error instead of the error itself.
Now I made that translations map use the error message as key instead of the
address. Added relevant synchronization mechanisms to protect the structure
and initialize it upon restore.
PiperOrigin-RevId: 346590485
|
|
The loopback interface will never have any neighbouring nodes so
advertising its interest in multicast groups is unnecessary.
Bug #4682, #4861
Startblock:
has LGTM from asfez
and then
add reviewer tamird
PiperOrigin-RevId: 346587604
|
|
Recursive make is difficult to follow and debug. Drop this by using
internal functions, which, while difficult, are easier than trying to
following recursive invokations.
Further simplify the Makefile by collapsing the image bits and removing
the tools/vm directory, which is effectively unused.
Fixes #4952
PiperOrigin-RevId: 346569133
|
|
startblock:
has LGTM from peterjohnston
and then
add reviewer ghanan,tamird
PiperOrigin-RevId: 346565589
|
|
PiperOrigin-RevId: 346496532
|
|
PiperOrigin-RevId: 346487763
|
|
This is an empty commit that advances the RevId below, to fix a
repository synchronization issue.
PiperOrigin-RevId: 346465449
|
|
Prior to this change tcpdump would fail to create its output file
because the destination directory was owned by root. This would later
cause killall to fail, as tcpdump was not running. Check exit code of
tcpdump/tshark to produce better error messages should this regress.
PiperOrigin-RevId: 346353911
|
|
Avoid action at a distance where both `snifferArgs` and `snifferProg`
must stay in sync.
PiperOrigin-RevId: 346341231
|
|
Don't propagate arbitrary golang errors up from fusefs because errors
that don't map to an errno result in a sentry panic.
Reported-by: syzbot+697cb635346e456fddfc@syzkaller.appspotmail.com
PiperOrigin-RevId: 346220306
|
|
- Remove unused constants
- Correct function doc comment
- Remove useless cast
- Restore comment removed in an earlier change
PiperOrigin-RevId: 346205943
|
|
PiperOrigin-RevId: 346203209
|
|
PiperOrigin-RevId: 346197760
|
|
Removes comment lines about MaxUnsolicitedReportDelay. This is already
documented in the comment for GenericMulticastProtocolOptions.
PiperOrigin-RevId: 346185053
|
|
PiperOrigin-RevId: 346143528
|
|
PiperOrigin-RevId: 346134026
|
|
PiperOrigin-RevId: 346109185
|
|
openedMu has lock ordering violations. Most locks go through OpenedFlag(),
which is usually taken after renameMu and opMu. On the other hand, Tlopen takes
openedMu before renameMu and opMu (via safelyRead).
Resolving this violation is simple: just drop openedMu. The opened and
openFlags fields are already protected by opMu in most cases, renameMu (for
write) in one case (via safelyGlobal), and only in doWalk by neither.
This is a bit ugly because opMu is supposed to be a "semantic" lock, but it
works. I'm open to other suggestions.
Note that doWalk has a race condition where a FID may open after the open check
but before actually walking. This race existed before this change as well; it
is not clear if it is problematic.
PiperOrigin-RevId: 346108483
|
|
PiperOrigin-RevId: 346101076
|
|
PiperOrigin-RevId: 345976554
|
|
With the recent changes db36d948fa63ce950d94a5e8e9ebc37956543661, we try
to balance the receive window advertisements between payload lengths vs
segment overhead length. This works fine when segment size are much
higher than the overhead, but not otherwise. In cases where the segment
length is smaller than the segment overhead, we may end up not
advertising zero receive window for long time and end up tail-dropping
segments. This is especially pronounced when application socket reads
are slow or stopped. In this change we do not grow the right edge of
the receive window for smaller segment sizes similar to Linux.
Also, we keep track of the socket buffer usage and let the window grow
if the application is actively reading data.
Fixes #4903
PiperOrigin-RevId: 345832012
|
|
Startblock:
has LGTM from asfez
and then
add reviewer tamird
PiperOrigin-RevId: 345815146
|
|
Fixes #4991
PiperOrigin-RevId: 345800333
|
|
Per runtime.memmove, pointers are always copied atomically, as this is required
by the GC. (Also, the init() safety check doesn't work because it gets renamed
to <prefix>init() by template instantiation.)
PiperOrigin-RevId: 345800302
|
|
The next test case is perfectly valid, which creates a test directory
with appropriate permissions and ensures that you can't create a file.
This test case assumes that the root directory has certain permissions.
In this case, we may have EROFS instead of a permission error, but it's
perfectly plausible that no error occurs at all. The test is not valid.
PiperOrigin-RevId: 345764412
|
|
PiperOrigin-RevId: 345764404
|
|
PiperOrigin-RevId: 345763209
|
|
make load-benchmarks-images is empty with the deleted line.
PiperOrigin-RevId: 345741855
|
|
PiperOrigin-RevId: 345701623
|
|
PiperOrigin-RevId: 345696124
|
|
This is the RWMutex equivalent to the preceding sync.Mutex CL.
Updates #4804
PiperOrigin-RevId: 345681051
|
|
PiperOrigin-RevId: 345589628
|
|
PiperOrigin-RevId: 345564927
|
|
PiperOrigin-RevId: 345538979
|
|
c.Usage() only returns a string; f.Usage() will print the usage message.
PiperOrigin-RevId: 345500123
|
|
PiperOrigin-RevId: 345490319
|
|
Currently we rely on the user to take the lock on the endpoint that owns the
route, in order to modify it safely. We can instead move
`Route.RemoteLinkAddress` under `Route`'s mutex, and allow non-locking and
thread-safe access to other fields of `Route`.
PiperOrigin-RevId: 345461586
|
|
These options allow overriding the signal that gets sent to the process when
I/O operations are available on the file descriptor, rather than the default
`SIGIO` signal. Doing so also populates `siginfo` to contain extra information
about which file descriptor caused the event (`si_fd`) and what events happened
on it (`si_band`). The logic around which FD is populated within `si_fd`
matches Linux's, which means it has some weird edge cases where that value may
not actually refer to a file descriptor that is still valid.
This CL also ports extra S/R logic regarding async handler in VFS2.
Without this, async I/O handlers aren't properly re-registered after S/R.
PiperOrigin-RevId: 345436598
|
|
PiperOrigin-RevId: 345399936
|
|
Previous experience has shown that these types of wrappers tends to create two
kinds of problems: hidden allocations (e.g. each call to
FileReadWriteSeeker.Read/Write allocates a usermem.BytesIO on the heap) and
hidden lock ordering problems (e.g. VFS1 splice deadlocks). Since this is only
needed by fsimpl/verity, move it there.
PiperOrigin-RevId: 345377830
|
|
`slice := *(*[]unsafe.Pointer)(...)` makes a copy of the slice header, which
then escapes because of the conditional `atomic.StorePointer(&f.slice, &slice)`
from table expansion. This occurs even when the table doesn't expand, and when
it can't (e.g. `close()` => `f.setAll(nil)`). Fix this by avoiding the copy
until after table expansion.
Before this CL:
```
TEXT pkg/sentry/kernel/kernel.(*FDTable).setAll(SB) pkg/sentry/kernel/fd_table_unsafe.go
fd_table_unsafe.go:119 0x7f00005f50e0 64488b0c25f8ffffff MOVQ FS:0xfffffff8, CX
fd_table_unsafe.go:119 0x7f00005f50e9 483b6110 CMPQ 0x10(CX), SP
fd_table_unsafe.go:119 0x7f00005f50ed 0f864d040000 JBE 0x7f00005f5540
fd_table_unsafe.go:119 0x7f00005f50f3 4883c480 ADDQ $-0x80, SP
fd_table_unsafe.go:119 0x7f00005f50f7 48896c2478 MOVQ BP, 0x78(SP)
fd_table_unsafe.go:119 0x7f00005f50fc 488d6c2478 LEAQ 0x78(SP), BP
fd_table_unsafe.go:120 0x7f00005f5101 488b8424a8000000 MOVQ 0xa8(SP), AX
fd_table_unsafe.go:120 0x7f00005f5109 4885c0 TESTQ AX, AX
fd_table_unsafe.go:120 0x7f00005f510c 7411 JE 0x7f00005f511f
fd_table_unsafe.go:120 0x7f00005f510e 488b8c24b0000000 MOVQ 0xb0(SP), CX
fd_table_unsafe.go:120 0x7f00005f5116 4885c9 TESTQ CX, CX
fd_table_unsafe.go:120 0x7f00005f5119 0f8500040000 JNE 0x7f00005f551f
fd_table_unsafe.go:124 0x7f00005f511f 488d05da115700 LEAQ 0x5711da(IP), AX
fd_table_unsafe.go:124 0x7f00005f5126 48890424 MOVQ AX, 0(SP)
fd_table_unsafe.go:124 0x7f00005f512a e8d19fa1ff CALL runtime.newobject(SB)
fd_table_unsafe.go:124 0x7f00005f512f 488b7c2408 MOVQ 0x8(SP), DI
fd_table_unsafe.go:124 0x7f00005f5134 488b842488000000 MOVQ 0x88(SP), AX
fd_table_unsafe.go:124 0x7f00005f513c 488b4820 MOVQ 0x20(AX), CX
fd_table_unsafe.go:124 0x7f00005f5140 488b5108 MOVQ 0x8(CX), DX
fd_table_unsafe.go:124 0x7f00005f5144 488b19 MOVQ 0(CX), BX
fd_table_unsafe.go:124 0x7f00005f5147 488b4910 MOVQ 0x10(CX), CX
fd_table_unsafe.go:124 0x7f00005f514b 48895708 MOVQ DX, 0x8(DI)
fd_table_unsafe.go:124 0x7f00005f514f 48894f10 MOVQ CX, 0x10(DI)
fd_table_unsafe.go:124 0x7f00005f5153 833df6e1120100 CMPL $0x0, runtime.writeBarrier(SB)
fd_table_unsafe.go:124 0x7f00005f515a 660f1f440000 NOPW 0(AX)(AX*1)
fd_table_unsafe.go:124 0x7f00005f5160 0f8589030000 JNE 0x7f00005f54ef
fd_table_unsafe.go:124 0x7f00005f5166 48891f MOVQ BX, 0(DI)
fd_table_unsafe.go:124 0x7f00005f5169 48897c2470 MOVQ DI, 0x70(SP)
fd_table_unsafe.go:127 0x7f00005f516e 8bb424a0000000 MOVL 0xa0(SP), SI
fd_table_unsafe.go:127 0x7f00005f5175 39d6 CMPL DX, SI
fd_table_unsafe.go:127 0x7f00005f5177 0f8c5f030000 JL 0x7f00005f54dc
...
```
After this CL:
```
TEXT pkg/sentry/kernel/kernel.(*FDTable).setAll(SB) pkg/sentry/kernel/fd_table_unsafe.go
fd_table_unsafe.go:119 0x7f00005f50e0 64488b0c25f8ffffff MOVQ FS:0xfffffff8, CX
fd_table_unsafe.go:119 0x7f00005f50e9 488d4424e8 LEAQ -0x18(SP), AX
fd_table_unsafe.go:119 0x7f00005f50ee 483b4110 CMPQ 0x10(CX), AX
fd_table_unsafe.go:119 0x7f00005f50f2 0f868e040000 JBE 0x7f00005f5586
fd_table_unsafe.go:119 0x7f00005f50f8 4881ec98000000 SUBQ $0x98, SP
fd_table_unsafe.go:119 0x7f00005f50ff 4889ac2490000000 MOVQ BP, 0x90(SP)
fd_table_unsafe.go:119 0x7f00005f5107 488dac2490000000 LEAQ 0x90(SP), BP
fd_table_unsafe.go:120 0x7f00005f510f 488b9424c0000000 MOVQ 0xc0(SP), DX
fd_table_unsafe.go:120 0x7f00005f5117 660f1f840000000000 NOPW 0(AX)(AX*1)
fd_table_unsafe.go:120 0x7f00005f5120 4885d2 TESTQ DX, DX
fd_table_unsafe.go:120 0x7f00005f5123 0f8406040000 JE 0x7f00005f552f
fd_table_unsafe.go:120 0x7f00005f5129 488b9c24c8000000 MOVQ 0xc8(SP), BX
fd_table_unsafe.go:120 0x7f00005f5131 4885db TESTQ BX, BX
fd_table_unsafe.go:120 0x7f00005f5134 0f852b040000 JNE 0x7f00005f5565
fd_table_unsafe.go:124 0x7f00005f513a 488bb424a0000000 MOVQ 0xa0(SP), SI
fd_table_unsafe.go:124 0x7f00005f5142 488b7e20 MOVQ 0x20(SI), DI
fd_table_unsafe.go:127 0x7f00005f5146 4c8b4708 MOVQ 0x8(DI), R8
fd_table_unsafe.go:127 0x7f00005f514a 448b8c24b8000000 MOVL 0xb8(SP), R9
fd_table_unsafe.go:127 0x7f00005f5152 4539c1 CMPL R8, R9
fd_table_unsafe.go:127 0x7f00005f5155 0f8d4a020000 JGE 0x7f00005f53a5
...
```
PiperOrigin-RevId: 345363242
|
|
testutil.RandomID was using Rand.Read which is not safe for concurrent use.
It caused name conflicts in packetimpact tests when they are run in parallel.
Adding a mutex to protect the Rand.Read operation.
PiperOrigin-RevId: 345360062
|
|
PiperOrigin-RevId: 345359823
|
|
This change lets us split the v4 stats from the v6 stats, which will be
useful when adding stats for each network endpoint.
PiperOrigin-RevId: 345322615
|
|
However, receiving duplicated fragments will not cause reassembly to
fail. This is what Linux does too:
https://github.com/torvalds/linux/blob/38525c6/net/ipv4/inet_fragment.c#L355
PiperOrigin-RevId: 345309546
|
|
It's possible that all the cases in a given batch are excluded if
the offsets line up just right, which will cause the test to fail.
Don't generate an invalid test in this case.
PiperOrigin-RevId: 345276588
|
|
Moved AddressAndFamily() and ConvertAddress() to socket package from netstack.
This helps because these utilities are used by sibling netstack packages.
Such sibling dependencies can later cause circular dependencies. Common utils
shared between siblings should be moved up to the parent.
PiperOrigin-RevId: 345275571
|
|
This has no effect on the continuous integration system, and simply
publishes a cached container image containing the agent and metrics
agent with known provenance.
PiperOrigin-RevId: 345274375
|
|
PiperOrigin-RevId: 345265342
|