summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2019-04-19Add support for the MSG_TRUNC msghdr flag.Ian Gudger
The MSG_TRUNC flag is set in the msghdr when a message is truncated. Fixes google/gvisor#200 PiperOrigin-RevId: 244440486 Change-Id: I03c7d5e7f5935c0c6b8d69b012db1780ac5b8456
2019-04-18tcpip/transport/udp: add Forwarder typeBen Burkert
Add a UDP forwarder for intercepting and forwarding UDP sessions. Change-Id: I2d83c900c1931adfc59a532dd4f6b33a0db406c9 PiperOrigin-RevId: 244293576
2019-04-18Enable vDSO support on arm64.Haibo Xu
Signed-off-by: Haibo Xu <haibo.xu@arm.com> Change-Id: I20103cd6d193431ab7e8120005da1f567b9bc2eb PiperOrigin-RevId: 244280119
2019-04-18Format struct pollfd in poll(2)/ppoll(2)Michael Pratt
I0410 15:40:38.854295 3776 x:0] [ 1] poll_test E poll(0x2b00bfb5c020 [{FD: 0x3 anon_inode:[eventfd], Events: POLLOUT, REvents: ...}], 0x1, 0x1) I0410 15:40:38.854348 3776 x:0] [ 1] poll_test X poll(0x2b00bfb5c020 [{FD: 0x3 anon_inode:[eventfd], Events: POLLOUT|POLLERR|POLLHUP, REvents: POLLOUT}], 0x1, 0x1) = 0x1 (10.765?s) PiperOrigin-RevId: 244269879 Change-Id: If07ba54a486fdeaaedfc0123769b78d1da862307
2019-04-18Keep symlink target open while in test that compares inode ids.Nicolas Lacasse
Inode ids are only guaranteed to be stable across save/restore if the file is held open. This CL fixes a simple stat test to allow it to compare symlink and target by inode id, as long as the link target is held open. PiperOrigin-RevId: 244238343 Change-Id: I74c5115915b1cc032a4c16515a056a480f218f00
2019-04-18Only emit unimplemented syscall events for unsupported values.Ian Gudger
Only emit unimplemented syscall events for setting SO_OOBINLINE and SO_LINGER when attempting to set unsupported values. PiperOrigin-RevId: 244229675 Change-Id: Icc4562af8f733dd75a90404621711f01a32a9fc1
2019-04-18netstack: use a proper network protocol to set gso.L3HdrLenAndrei Vagin
It is possible to create a listening socket which will accept IPv4 and IPv6 connections. In this case, we set IPv6ProtocolNumber for all accepted endpoints, even if they handle IPv4 connections. This means that we can't use endpoint.netProto to set gso.L3HdrLen. PiperOrigin-RevId: 244227948 Change-Id: I5e1863596cb9f3d216febacdb7dc75651882eef1
2019-04-17Don't allow sigtimedwait to catch unblockable signalsMichael Pratt
The existing logic attempting to do this is incorrect. Unary ^ has higher precedence than &^, so mask always has UnblockableSignals cleared, allowing dequeueSignalLocked to dequeue unblockable signals (which allows userspace to ignore them). Switch the logic so that unblockable signals are always masked. PiperOrigin-RevId: 244058487 Change-Id: Ib19630ac04068a1fbfb9dc4a8eab1ccbdb21edc3
2019-04-17Use FD limit and file size limit from hostFabricio Voznika
FD limit and file size limit is read from the host, instead of using hard-coded defaults, given that they effect the sandbox process. Also limit the direct cache to use no more than half if the available FDs. PiperOrigin-RevId: 244050323 Change-Id: I787ad0fdf07c49d589e51aebfeae477324fe26e6
2019-04-17Convert poll/select to operate more directly on linux.PollFDMichael Pratt
Current, doPoll copies the user struct pollfd array into a []syscalls.PollFD, which contains internal kdefs.FD and waiter.EventMask types. While these are currently binary-compatible with the Linux versions, we generally discourage copying directly to internal types (someone may inadvertantly change kdefs.FD to uint64). Instead, copy directly to a []linux.PollFD, which will certainly be binary compatible. Most of syscalls/polling.go is included directly into syscalls/linux/sys_poll.go, as it can then operate directly on linux.PollFD. The additional syscalls.PollFD type is providing little value. I've also added explicit conversion functions for waiter.EventMask, which creates the possibility of a different binary format. PiperOrigin-RevId: 244042947 Change-Id: I24e5b642002a32b3afb95a9dcb80d4acd1288abf
2019-04-17Internal change.Googler
PiperOrigin-RevId: 244036529 Change-Id: I280f9632a65d2e40d844e0d5ec3a101d808434ee
2019-04-17Return error from fdbased.NewFabricio Voznika
RELNOTES: n/a PiperOrigin-RevId: 244031742 Change-Id: Id0cdb73194018fb5979e67b58510ead19b5a2b81
2019-04-15Fix gvisor-containerd-shim download in the test.Lantao Liu
The file layout in the bucket is changed a little bit recently to support both v1 shim and v2 shim. PiperOrigin-RevId: 243682904 Change-Id: Ic1373c6dc088ef41f829e7ce3ea3762e1e2b0292
2019-04-11Add 'runsc do' commandFabricio Voznika
It provides an easy way to run commands to quickly test gVisor. By default it maps the host root as the container root with a writable overlay on top (so the host root is not modified). Example: sudo runsc do ls -lh --color sudo runsc do ~/src/test/my-test.sh PiperOrigin-RevId: 243178711 Change-Id: I05f3d6ce253fe4b5f1362f4a07b5387f6ddb5dd9
2019-04-11Format FDs in strace logsMichael Pratt
Normal files display their path in the current mount namespace: I0410 10:57:54.964196 216336 x:0] [ 1] ls X read(0x3 /proc/filesystems, 0x55cee3bdb2c0 "nodev\t9p\nnodev\tdevpts \nnodev\tdevtmpfs\nnodev\tproc\nnodev\tramdiskfs\nnodev\tsysfs\nnodev\ttmpfs\n", 0x1000) = 0x58 (24.462?s) AT_FDCWD includes the CWD: I0411 12:58:48.278427 1526 x:0] [ 1] stat_test E newfstatat(AT_FDCWD /home/prattmic, 0x55ea719b564e /proc/self, 0x7ef5cefc2be8, 0x0) Sockets (and other non-vfs files) display an inode number (like /proc/PID/fd): I0410 10:54:38.909123 207684 x:0] [ 1] nc E bind(0x3 socket:[1], 0x55b5a1652040 {Family: AF_INET, Addr: , Port: 8080}, 0x10) I also fixed a few syscall args that should be Path. PiperOrigin-RevId: 243169025 Change-Id: Ic7dda6a82ae27062fe2a4a371557acfd6a21fa2a
2019-04-11CONTRIBUTING: add style guide pointerAdin Scannell
Change-Id: I93a78a6b2bb2eaa69046c6cfecee2e4cfcf20e44 PiperOrigin-RevId: 243140359
2019-04-11README: add build badgeAdin Scannell
Change-Id: Ie6b73ac729c8c85b1229e09da5b113be9780fa95 PiperOrigin-RevId: 243131814
2019-04-11Use open fids when fstat()ing gofer files.Jamie Liu
PiperOrigin-RevId: 243018347 Change-Id: I1e5b80607c1df0747482abea61db7fcf24536d37
2019-04-10Internal changeMichael Pratt
PiperOrigin-RevId: 242978508 Change-Id: I0ea59ac5ba1dd499e87c53f2e24709371048679b
2019-04-10Fix uses of RootFromContext.Nicolas Lacasse
RootFromContext can return a dirent with reference taken, or nil. We must call DecRef if (and only if) a real dirent is returned. PiperOrigin-RevId: 242965515 Change-Id: Ie2b7b4cb19ee09b6ccf788b71f3fd7efcdf35a11
2019-04-10rlimits test: don't exceed nr_open.Kevin Krakauer
Even superuser cannot raise RLIMIT_NOFILE above /proc/sys/fs/nr_open, so start the test by lowering the limits before raising. Change-Id: Ied6021c64178a6cb9098088a1a3384db523a226f PiperOrigin-RevId: 242965249
2019-04-10DATA RACE in fs.(*Dirent).fullNameYong He
add renameMu.Lock when oldParent == newParent in order to avoid data race in following report: WARNING: DATA RACE Read at 0x00c000ba2160 by goroutine 405: gvisor.googlesource.com/gvisor/pkg/sentry/fs.(*Dirent).fullName() pkg/sentry/fs/dirent.go:246 +0x6c gvisor.googlesource.com/gvisor/pkg/sentry/fs.(*Dirent).FullName() pkg/sentry/fs/dirent.go:356 +0x8b gvisor.googlesource.com/gvisor/pkg/sentry/kernel.(*FDMap).String() pkg/sentry/kernel/fd_map.go:135 +0x1e0 fmt.(*pp).handleMethods() GOROOT/src/fmt/print.go:603 +0x404 fmt.(*pp).printArg() GOROOT/src/fmt/print.go:686 +0x255 fmt.(*pp).doPrintf() GOROOT/src/fmt/print.go:1003 +0x33f fmt.Fprintf() GOROOT/src/fmt/print.go:188 +0x7f gvisor.googlesource.com/gvisor/pkg/log.(*Writer).Emit() pkg/log/log.go:121 +0x89 gvisor.googlesource.com/gvisor/pkg/log.GoogleEmitter.Emit() pkg/log/glog.go:162 +0x1acc gvisor.googlesource.com/gvisor/pkg/log.(*GoogleEmitter).Emit() <autogenerated>:1 +0xe1 gvisor.googlesource.com/gvisor/pkg/log.(*BasicLogger).Debugf() pkg/log/log.go:177 +0x111 gvisor.googlesource.com/gvisor/pkg/log.Debugf() pkg/log/log.go:235 +0x66 gvisor.googlesource.com/gvisor/pkg/sentry/kernel.(*Task).Debugf() pkg/sentry/kernel/task_log.go:48 +0xfe gvisor.googlesource.com/gvisor/pkg/sentry/kernel.(*Task).DebugDumpState() pkg/sentry/kernel/task_log.go:66 +0x11f gvisor.googlesource.com/gvisor/pkg/sentry/kernel.(*runApp).execute() pkg/sentry/kernel/task_run.go:272 +0xc80 gvisor.googlesource.com/gvisor/pkg/sentry/kernel.(*Task).run() pkg/sentry/kernel/task_run.go:91 +0x24b Previous write at 0x00c000ba2160 by goroutine 423: gvisor.googlesource.com/gvisor/pkg/sentry/fs.Rename() pkg/sentry/fs/dirent.go:1628 +0x61f gvisor.googlesource.com/gvisor/pkg/sentry/syscalls/linux.renameAt.func1.1() pkg/sentry/syscalls/linux/sys_file.go:1864 +0x1f8 gvisor.googlesource.com/gvisor/pkg/sentry/syscalls/linux.fileOpAt( gvisor.googlesource.com/g/linux/sys_file.go:51 +0x20f gvisor.googlesource.com/gvisor/pkg/sentry/syscalls/linux.renameAt.func1() pkg/sentry/syscalls/linux/sys_file.go:1852 +0x218 gvisor.googlesource.com/gvisor/pkg/sentry/syscalls/linux.fileOpAt() pkg/sentry/syscalls/linux/sys_file.go:51 +0x20f gvisor.googlesource.com/gvisor/pkg/sentry/syscalls/linux.renameAt() pkg/sentry/syscalls/linux/sys_file.go:1840 +0x180 gvisor.googlesource.com/gvisor/pkg/sentry/syscalls/linux.Rename() pkg/sentry/syscalls/linux/sys_file.go:1873 +0x60 gvisor.googlesource.com/gvisor/pkg/sentry/kernel.(*Task).executeSyscall() pkg/sentry/kernel/task_syscall.go:165 +0x17a gvisor.googlesource.com/gvisor/pkg/sentry/kernel.(*Task).doSyscallInvoke() pkg/sentry/kernel/task_syscall.go:283 +0xb4 gvisor.googlesource.com/gvisor/pkg/sentry/kernel.(*Task).doSyscallEnter() pkg/sentry/kernel/task_syscall.go:244 +0x10c gvisor.googlesource.com/gvisor/pkg/sentry/kernel.(*Task).doSyscall() pkg/sentry/kernel/task_syscall.go:219 +0x1e3 gvisor.googlesource.com/gvisor/pkg/sentry/kernel.(*runApp).execute() pkg/sentry/kernel/task_run.go:215 +0x15a9 gvisor.googlesource.com/gvisor/pkg/sentry/kernel.(*Task).run() pkg/sentry/kernel/task_run.go:91 +0x24b Reported-by: syzbot+e1babbf756fab380dfff@syzkaller.appspotmail.com Change-Id: Icd2620bb3ea28b817bf0672d454a22b9d8ee189a PiperOrigin-RevId: 242938741
2019-04-10Allow threads with CAP_SYS_RESOURCE to raise hard rlimits.Kevin Krakauer
PiperOrigin-RevId: 242919489 Change-Id: Ie3267b3bcd8a54b54bc16a6556369a19e843376f
2019-04-10Start saving MountSource.DirentCache.Nicolas Lacasse
DirentCache is already a savable type, and it ensures that it is empty at the point of Save. There is no reason not to save it along with the MountSource. This did uncover an issue where not all MountSources were properly flushed before Save. If a mount point has an open file and is then unmounted, we save the MountSource without flushing it first. This CL also fixes that by flushing all MountSources for all open FDs on Save. PiperOrigin-RevId: 242906637 Change-Id: I3acd9d52b6ce6b8c989f835a408016cb3e67018f
2019-04-10Fixed /proc/cpuinfo permissionsShiva Prasanth
This also applies these permissions to other static proc files. Change-Id: I4167e585fed49ad271aa4e1f1260babb3239a73d PiperOrigin-RevId: 242898575
2019-04-09Match multi-word StateMichael Pratt
From a recent test failure: "State:\tD (disk sleep)\n" "disk sleep" does not match \w+. We need to allow spaces. PiperOrigin-RevId: 242762469 Change-Id: Ic8d05a16669412a72c1e76b498373e5b22fe64c4
2019-04-09syscalls: sendfile: limit the count to MAX_RW_COUNTLi Qiang
From sendfile spec and also the linux kernel code, we should limit the count arg to 'MAX_RW_COUNT'. This patch export 'MAX_RW_COUNT' in kernel pkg and use it in the implementation of sendfile syscall. Signed-off-by: Li Qiang <pangpei.lq@antfin.com> Change-Id: I1086fec0685587116984555abd22b07ac233fbd2 PiperOrigin-RevId: 242745831
2019-04-09runsc: set UID and GID if gofer is executed in a new user namespaceAndrei Vagin
Otherwise, we will not have capabilities in the user namespace. And this patch adds the noexec option for mounts. https://github.com/google/gvisor/issues/145 PiperOrigin-RevId: 242706519 Change-Id: I1b78b77d6969bd18038c71616e8eb7111b71207c
2019-04-09Add TCP checksum verification.Bhasker Hariharan
PiperOrigin-RevId: 242704699 Change-Id: I87db368ca343b3b4bf4f969b17d3aa4ce2f8bd4f
2019-04-09Update README.md to point to gvisor.devAdin Scannell
PiperOrigin-RevId: 242690968 Change-Id: I1ac2248b5ab3bcd95beed52ecddbb9f34eeb3775
2019-04-09Use (*testing.T).Helper to clean up test failuresTamir Duberstein
PiperOrigin-RevId: 242647530 Change-Id: I1bf9ac1d664f452dc47ca670d408a73538cb482f
2019-04-08Internal changeMichael Pratt
PiperOrigin-RevId: 242573252 Change-Id: Ibb4c6bfae2c2e322bf1cec23181a0ab663d8530a
2019-04-08Export kernel.SignalInfoPriv.Jamie Liu
Also add kernel.SignalInfoNoInfo, and use it in RLIMIT_FSIZE checks. PiperOrigin-RevId: 242562428 Change-Id: I4887c0e1c8f5fddcabfe6d4281bf76d2f2eafe90
2019-04-08Add TODOMichael Pratt
PiperOrigin-RevId: 242531141 Change-Id: I2a3bd815bda09f392f511f47120d5d9e6e86a40d
2019-04-08Intermediate ram fs dirs should be writable.Nicolas Lacasse
We construct a ramfs tree of "scaffolding" directories for all mount points, so that a directory exists that each mount point can be mounted over. We were creating these directories without write permissions, which meant that they were not wribable even when underlayed under a writable filesystem. They should be writable. PiperOrigin-RevId: 242507789 Change-Id: I86645e35417560d862442ff5962da211dbe9b731
2019-04-08Bump rules_go to v0.18.2 and go toolchain to v1.12.2.Nicolas Lacasse
PiperOrigin-RevId: 242493066 Change-Id: I2b2b590799d208895c5c16606e4f854dfd112dba
2019-04-05Deflake PtraceTest.SeizeSetOptions.Jamie Liu
PiperOrigin-RevId: 242226319 Change-Id: Iefc78656841315f6b7d48bd85db451486850264d
2019-04-05Use string type for extended attribute values, instead of []byte.Nicolas Lacasse
Strings are a better fit for this usage because they are immutable in Go, and can contain arbitrary bytes. It also allows us to avoid casting bytes to string (and the associated allocation) in the hot path when checking for overlay whiteouts. PiperOrigin-RevId: 242208856 Change-Id: I7699ae6302492eca71787dd0b72e0a5a217a3db2
2019-04-05Make it easier for humans to use RBE, and maintain our bazelrc.Nicolas Lacasse
This CL merges all RBE-specific configuration from .bazelrc_rbe into .bazelrc so that it will be picked up by default by users running bazel. It also checks in a bazelrc from the upstream bazel-toolchains repository, and imports that into our repo-specific .bazelrc. This makes it easier to maintain and update the bazelrc going forward. Documentation was added to the README. PiperOrigin-RevId: 242208733 Change-Id: Iea32de9be85b024bd74f88909b56b2a8ab34851a
2019-04-04Set fixed field in CPUID function 2Michael Pratt
From the SDM: "The least-significant byte in register EAX (register AL) will always return 01H. Software should ignore this value and not interpret it as an informational descriptor." Unfortunately, online docs [1] [2] (likely based on an old version of the SDM) say: "The least-significant byte in register EAX (register AL) indicates the number of times the CPUID instruction must be executed with an input value of 2 to get a complete description of the processor's caches and TLBs." dlang uses this second interpretation [3] and will loop 2^32 times if we return zero. Fix this by specifying the fixed value of one. We still don't support exposing the actual cache information, leaving all other bytes empty. A zero byte means: "Null descriptor, this byte contains no information." [1] http://www.sandpile.org/x86/cpuid.htm#level_0000_0002h [2] https://c9x.me/x86/html/file_module_x86_id_45.html [3] https://github.com/dlang/druntime/blob/424640864c2aa001731467e96f637bd3e704e481/src/core/cpuid.d#L533-L534 PiperOrigin-RevId: 242046629 Change-Id: Ic0f0a5f974b20f71391cb85645bdcd4003e5fe88
2019-04-04gvisor: Add support for the MS_NOEXEC mount optionAndrei Vagin
https://github.com/google/gvisor/issues/145 PiperOrigin-RevId: 242044115 Change-Id: I8f140fe05e32ecd438b6be218e224e4b7fe05878
2019-04-04Remove defer from trivial ThreadID methodsMichael Pratt
In particular, ns.IDOfTask and tg.ID are used for gettid and getpid, respectively, where removing defer saves ~100ns. This may be a small improvement to application logging, which may call gettid/getpid frequently. PiperOrigin-RevId: 242039616 Change-Id: I860beb62db3fe077519835e6bafa7c74cba6ca80
2019-04-04BUILD: Add useful go_path targetAdin Scannell
Change-Id: Ibd6d8a1a63826af6e62a0f0669f8f0866c8091b4 PiperOrigin-RevId: 242037969
2019-04-04Format workspaceAdin Scannell
Change-Id: Ibb77656c46942eb123cd6cff8b471a526468d2dd PiperOrigin-RevId: 242007583
2019-04-03Internal change.Googler
PiperOrigin-RevId: 241867632 Change-Id: I29459f2758ac4835882b491ff25c6aca9a37d41d
2019-04-03Only CopyOut CPU when it changesMichael Pratt
This will save copies when preemption is not caused by a CPU migration. PiperOrigin-RevId: 241844399 Change-Id: I2ba3b64aa377846ab763425bd59b61158f576851
2019-04-03Don't release d.mu in checks for child-existence.Nicolas Lacasse
Dirent.exists() is called in Create to check whether a child with the given name already exists. Dirent.exists() calls walk(), and before this CL allowed walk() to drop d.mu while calling d.Inode.Lookup. During this existence check, a racing Rename() can acquire d.mu and create a new child of the dirent with the same name. (Note that the source and destination of the rename must be in the same directory, otherwise renameMu will be taken preventing the race.) In this case, d.exists() can return false, even though a child with the same name actually does exist. This CL changes d.exists() so that it does not release d.mu while walking, thus preventing the race with Rename. It also adds comments noting that lockForRename may not take renameMu if the source and destination are in the same directory, as this is a bit surprising (at least it was to me). PiperOrigin-RevId: 241842579 Change-Id: I56524870e39dfcd18cab82054eb3088846c34813
2019-04-03Cache ThreadGroups in PIDNamespaceMichael Pratt
If there are thousands of threads, ThreadGroupsAppend becomes very expensive as it must iterate over all Tasks to find the ThreadGroup leaders. Reduce the cost by maintaining a map of ThreadGroups which can be used to grab them all directly. The one somewhat visible change is to convert PID namespace init children zapping to a group-directed SIGKILL, as Linux did in 82058d668465 "signal: Use group_send_sig_info to kill all processes in a pid namespace". In a benchmark that creates N threads which sleep for two minutes, we see approximately this much CPU time in ThreadGroupsAppend: Before: 1 thread: 0ms 1024 threads: 30ms - 9130ms 4096 threads: 50ms - 2000ms 8192 threads: 18160ms 16384 threads: 17210ms After: 1 thread: 0ms 1024 threads: 0ms 4096 threads: 0ms 8192 threads: 0ms 16384 threads: 0ms The profiling is actually extremely noisy (likely due to cache effects), as some runs show almost no samples at 1024, 4096 threads, but obviously this does not scale to lots of threads. PiperOrigin-RevId: 241828039 Change-Id: I17827c90045df4b3c49b3174f3a05bca3026a72c
2019-04-03Fix index out of bounds in tty implementation.Kevin Krakauer
The previous implementation revolved around runes instead of bytes, which caused weird behavior when converting between the two. For example, peekRune would read the byte 0xff from a buffer, convert it to a rune, then return it. As rune is an alias of int32, 0xff was 0-padded to int32(255), which is the hex code point for ?. However, peekRune also returned the length of the byte (1). When calling utf8.EncodeRune, we only allocated 1 byte, but tried the write the 2-byte character ?. tl;dr: I apparently didn't understand runes when I wrote this. PiperOrigin-RevId: 241789081 Change-Id: I14c788af4d9754973137801500ef6af7ab8a8727
2019-04-03Addresses data race in tty implementation.Kevin Krakauer
Also makes the safemem reading and writing inline, as it makes it easier to see what locks are held. PiperOrigin-RevId: 241775201 Change-Id: Ib1072f246773ef2d08b5b9a042eb7e9e0284175c
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-28 11:06:15 +0000