Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 301872161
|
|
PiperOrigin-RevId: 301859066
|
|
Also get rid of the readViewHasData as it's not required anymore.
Updates #231, #357
PiperOrigin-RevId: 301837227
|
|
Updates #231, #357
PiperOrigin-RevId: 301833669
|
|
workMu is removed and e.mu is now a mutex that supports TryLock. The packet
processing path tries to lock the mutex and if its locked it will just queue the
packet and move on. The endpoint.UnlockUser() will process any backlog of
packets before unlocking the socket.
This simplifies the locking inside tcp endpoints a lot. Further the
endpoint.LockUser() implements spinning as long as the lock is not held by
another syscall goroutine. This ensures low latency as not spinning leads to the
task thread being put to sleep if the lock is held by the packet dispatch
path. This is suboptimal as the lower layer rarely holds the lock for long so
implementing spinning here helps.
If the lock is held by another task goroutine then we just proceed to call
LockUser() and the task could be put to sleep.
The protocol goroutines themselves just call e.mu.Lock() and block if the
lock is currently not available.
Updates #231, #357
PiperOrigin-RevId: 301808349
|
|
Refactor fs/host.TTYFileOperations so that the relevant functionality can be
shared with VFS2 (fsimpl/host.ttyFD).
Incorporate host.defaultFileFD into the default host.fileDescription. This way,
there is no need for a separate default_file.go. As in vfs1, the TTY file
implementation can be built on top of this default and override operations as
necessary (PRead/Read/PWrite/Write, Release, Ioctl).
Note that these changes still need to be plumbed into runsc, which refers to
imported TTYs in control/proc.go:ExecAsync.
Updates #1672.
PiperOrigin-RevId: 301718157
|
|
PiperOrigin-RevId: 301716568
|
|
These tests could timeout because net.DialTCP didn't respect the
timeout.
|
|
TestConcurrentAll executes 1000 goroutines which never sleep,
so they are not preempted by Go's runtime. In Go 1.14, async preemption
has been added, but the added runtime.Gosched() call will do nothing
wrong in this case too.
PiperOrigin-RevId: 301705712
|
|
PiperOrigin-RevId: 301700868
|
|
This will aid in segment reordering detection.
Updates #691
PiperOrigin-RevId: 301692638
|
|
PiperOrigin-RevId: 301686266
|
|
It was looking at VFS1 table to determine where to
allocate the next FD from.
Updates #1035
PiperOrigin-RevId: 301678858
|
|
PiperOrigin-RevId: 301650898
|
|
PiperOrigin-RevId: 301614096
|
|
PiperOrigin-RevId: 301578043
|
|
rand.Read() results in a syscall to the host on every call instead
we can wrap it with a bufio.Reader to buffer and reduce number of syscalls.
This is especially important for TCP where every newly created endpoint
reads random data to initialize the timestamp offsets for the endpoint.
Updates #231
PiperOrigin-RevId: 301501607
|
|
PiperOrigin-RevId: 301476456
|
|
PiperOrigin-RevId: 301402181
|
|
PiperOrigin-RevId: 301382690
|
|
FDTable.setAll is used to zap entries, but it grows the table up to
a specified fd.
Reported-by: syzbot+9e281b0750d2d4caa190@syzkaller.appspotmail.com
PiperOrigin-RevId: 301280000
|
|
Updates #1035
PiperOrigin-RevId: 301255357
|
|
Only gofer filesystem was calling vfs.CheckSetStat for
vfs.FilesystemImpl.SetStatAt and vfs.FileDescriptionImpl.SetStat.
Updates #1193, #1672, #1197
PiperOrigin-RevId: 301226522
|
|
PiperOrigin-RevId: 301208471
|
|
PiperOrigin-RevId: 301197007
|
|
PiperOrigin-RevId: 301157950
|
|
Updates #1195, #1193
PiperOrigin-RevId: 300950993
|
|
- When setting up the virtual filesystem, mount a host.filesystem to contain
all files that need to be imported.
- Make read/preadv syscalls to the host in cases where preadv2 may not be
supported yet (likewise for writing).
- Make save/restore functions in kernel/kernel.go return early if vfs2 is
enabled.
PiperOrigin-RevId: 300922353
|
|
Closes #1195
PiperOrigin-RevId: 300867055
|
|
This will give more information about the file to
identify where possibly the extra DecRef()
would be.
PiperOrigin-RevId: 300855874
|
|
PiperOrigin-RevId: 300845134
|
|
PiperOrigin-RevId: 300836270
|
|
PiperOrigin-RevId: 300832988
|
|
Previously, SLAAC related state was stored on a per-address basis. This was
sufficient for the simple case of a single SLAAC address per prefix, but
future CLs will introduce temporary addresses which will result in multiple
SLAAC addresses for a prefix. This refactor allows storing multiple addresses
for a prefix in a single SLAAC prefix state.
No behaviour changes - existing tests continue to pass.
PiperOrigin-RevId: 300832812
|
|
- Make oomScoreAdj a ThreadGroup field (Linux: signal_struct::oom_score_adj).
- Avoid deadlock caused by Task.OOMScoreAdj()/SetOOMScoreAdj() locking Task.mu
and TaskSet.mu in the wrong order (via Task.ExitState()).
PiperOrigin-RevId: 300814698
|
|
When a NIC is removed, attempt to disable the NIC first to cleanup
dynamic state and stop ongoing periodic tasks (e.g. IPv6 router
solicitations, DAD) so that a removed NIC does not attempt to send
packets.
Tests:
- stack_test.TestRemoveUnknownNIC
- stack_test.TestRemoveNIC
- stack_test.TestDADStop
- stack_test.TestCleanupNDPState
- stack_test.TestRouteWithDownNIC
- stack_test.TestStopStartSolicitingRouters
PiperOrigin-RevId: 300805857
|
|
- Don't allocate []*endpointsByNic in transportDemuxer.deliverPacket() unless
actually needed for UDP broadcast/multicast.
- Don't allocate []*endpointsByNic via transportDemuxer.findEndpointLocked()
=> transportDemuxer.findAllEndpointsLocked().
- Skip unnecessary map lookups in transportDemuxer.findEndpointLocked() =>
transportDemuxer.findAllEndpointsLocked() (now iterEndpointsLocked).
For most deliverable packets other than UDP broadcast/multicast packets, this
saves two slice allocations and three map lookups per packet.
PiperOrigin-RevId: 300804135
|
|
PiperOrigin-RevId: 300803515
|
|
PiperOrigin-RevId: 300802159
|
|
PiperOrigin-RevId: 300798423
|
|
Note that the raw faccessat system call does not actually take a flags argument;
according to faccessat(2), the glibc wrapper implements the flags by using
fstatat(2). Remove the flag argument that we try to extract from vfs1, which
would just be a garbage value.
Updates #1965
Fixes #2101
PiperOrigin-RevId: 300796067
|
|
2aa9514a06a5e34894e606d508ac2df53b082c74 skips SIGURG, but later code expects
the sigchans array contains consecutive signal numbers.
PiperOrigin-RevId: 300793450
|
|
LinkEndpoints may expect/assume that the a tcpip.PacketBuffer's Header
has enough capacity for its own headers, as per documentation for
LinkEndpoint.MaxHeaderLength.
Test: stack_test.TestNICForwarding
PiperOrigin-RevId: 300784192
|
|
Plumbs MS_NOEXEC and MS_RDONLY. Others are TODO.
Updates #1623 #1193
PiperOrigin-RevId: 300764669
|
|
PiperOrigin-RevId: 300668506
|
|
PiperOrigin-RevId: 300626011
|
|
Mark /pkg/tcpip/adapters/gonet/gonet_test as flaky.
PiperOrigin-RevId: 300609529
|
|
When the sandbox runs in attached more, e.g. runsc do, runsc run, the
sandbox lifetime is controlled by the parent process. This wasn't working
in all cases because PR_GET_PDEATHSIG doesn't propagate through execve
when the process changes uid/gid. So it was getting dropped when the
sandbox execve's to change to user nobody.
PiperOrigin-RevId: 300601247
|
|
This issue was caused by 'restart_syscall'.
The value of Register R0 should be stored after finishing sysemu.
So that we can restore the value and restart syscall.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
...instead of sorting at various times. Plug a memory leak by setting
removed elements to nil.
PiperOrigin-RevId: 300471087
|