Age | Commit message (Collapse) | Author |
|
A userspace process (CPL=3) can access an i/o port if the bit corresponding to
the port is set to 0 in the I/O permission bitmap.
Configure the I/O permission bitmap address beyond the last valid byte in the
TSS so access to all i/o ports is blocked.
Signed-off-by: Liu Hua <sdu.liu@huawei.com>
Change-Id: I3df76980c3735491db768f7210e71703f86bb989
PiperOrigin-RevId: 257336518
|
|
PiperOrigin-RevId: 257314911
|
|
PiperOrigin-RevId: 257297820
|
|
PiperOrigin-RevId: 257293198
|
|
The error set in the loop in createAt was being masked
by other errors declared with ":=". This allowed an
ErrResolveViaReadlink error to escape, which can cause
a sentry panic.
Added test case which repros without the fix.
PiperOrigin-RevId: 257061767
|
|
PiperOrigin-RevId: 257042681
|
|
PiperOrigin-RevId: 257041876
|
|
PiperOrigin-RevId: 257037608
|
|
PiperOrigin-RevId: 257010414
|
|
PiperOrigin-RevId: 256494243
|
|
PiperOrigin-RevId: 256481284
|
|
PiperOrigin-RevId: 256453827
|
|
PiperOrigin-RevId: 256433283
|
|
PiperOrigin-RevId: 256319059
|
|
BounceToKernel will make vCPU quit from guest ring3 to guest ring0, but
vCPUWaiter is not cleared when we unlock the vCPU, when next time this vCPU
enter guest mode ring3, vCPU may enter guest mode with vCPUWaiter bit setted,
this will cause the following BounceToKernel to this vCPU hangs at
waitUntilNot.
Halt may workaroud this issue, because halt process will reset vCPU status into
vCPUUser, and notify all waiter for vCPU state change, but if there is no
exception or syscall in this period, BounceToKernel will hang at waitUntilNot.
PiperOrigin-RevId: 256299660
|
|
This renames FDMap to FDTable and drops the kernel.FD type, which had an entire
package to itself and didn't serve much use (it was freely cast between types,
and served as more of an annoyance than providing any protection.)
Based on BenchmarkFDLookupAndDecRef-12, we can expect 5-10 ns per lookup
operation, and 10-15 ns per concurrent lookup operation of savings.
This also fixes two tangential usage issues with the FDMap. Namely, non-atomic
use of NewFDFrom and associated calls to Remove (that are both racy and fail to
drop the reference on the underlying file.)
PiperOrigin-RevId: 256285890
|
|
Adds support level documentation for all syscalls. Removes the Undocumented
utility function to discourage usage while leaving SupportUndocumented as the
default support level for Syscall structs.
PiperOrigin-RevId: 256281927
|
|
https://bugzilla.redhat.com/show_bug.cgi?id=1568337
PiperOrigin-RevId: 256276198
|
|
PiperOrigin-RevId: 256234390
|
|
PiperOrigin-RevId: 256231055
|
|
fileOpAt holds references on the Dirents passed as arguments to the callback,
and drops refs when finished, so we don't need to DecRef those Dirents
ourselves
However, all Dirents that we get from FindInode/FindLink must be DecRef'd.
This CL cleans up the ref-counting logic, and fixes some refcount issues in the
process.
PiperOrigin-RevId: 256220882
|
|
It feels like "reticulating splines" is missing from the list of meaningless
syslog messages.
Signed-off-by: Ahmet Alp Balkan <ahmetb@google.com>
|
|
Fix two leaks for connectionless Unix sockets:
* Double connect: Subsequent connects would leak a reference on the previously
connected endpoint.
* Close unconnected: Sockets which were not connected at the time of closure
would leak a reference on their receiver.
PiperOrigin-RevId: 256070451
|
|
PiperOrigin-RevId: 256062988
|
|
This fixes the case when an app tries to create a file that already exists, and
is a symlink to itself. A test was added.
PiperOrigin-RevId: 256044811
|
|
PiperOrigin-RevId: 255759891
|
|
PiperOrigin-RevId: 255713414
|
|
PiperOrigin-RevId: 255711454
|
|
These are unfortunately unused and unmaintained. They can be brought back in
the future if need requires it.
PiperOrigin-RevId: 255697132
|
|
These syscalls require filesystem support that gVisor does not provide, and is
not planning to implement. Their absense should not trigger an event.
PiperOrigin-RevId: 255692871
|
|
PiperOrigin-RevId: 255687771
|
|
PiperOrigin-RevId: 255679603
|
|
PiperOrigin-RevId: 255679453
|
|
Right now, if we can't create a stub process, we will see this error:
panic: unable to activate mm: resource temporarily unavailable
It would be better to know the root cause of this "resource temporarily
unavailable".
PiperOrigin-RevId: 255656831
|
|
PiperOrigin-RevId: 255644277
|
|
I see that runsc-race is killed by SIGSYS, because openat isn't
allowed by seccomp filters:
60052 openat(AT_FDCWD, "/proc/sys/vm/overcommit_memory",
O_RDONLY|O_CLOEXEC <unfinished ...>
60052 <... openat resumed> ) = 257
60052 --- SIGSYS {si_signo=SIGSYS, si_code=SYS_SECCOMP, si_call_addr=0xfaacf1,
si_syscall=__NR_openat, si_arch=AUDIT_ARCH_X86_64} ---
PiperOrigin-RevId: 255640808
|
|
Get/Set pipe size and ioctl support were missing from
overlayfs. It required moving the pipe.Sizer interface
to fs so that overlay could get access.
Fixes #318
PiperOrigin-RevId: 255511125
|
|
Addresses obvious typos, in the documentation only.
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/443 from Pixep:fix/documentation-spelling 4d0688164eafaf0b3010e5f4824b35d1e7176d65
PiperOrigin-RevId: 255477779
|
|
Currently, the overlay dirCache is only used for a single logical use of
getdents. i.e., it is discard when the FD is closed or seeked back to
the beginning.
But the initial work of getting the directory contents can be quite
expensive (particularly sorting large directories), so we should keep it
as long as possible.
This is very similar to the readdirCache in fs/gofer.
Since the upper filesystem does not have to allow caching readdir
entries, the new CacheReaddir MountSourceOperations method controls this
behavior.
This caching should be trivially movable to all Inodes if desired,
though that adds an additional copy step for non-overlay Inodes.
(Overlay Inodes already do the extra copy).
PiperOrigin-RevId: 255477592
|
|
PiperOrigin-RevId: 255465635
|
|
PiperOrigin-RevId: 255462850
|
|
The code was wrongly assuming that only read access was
required from the lower overlay when checking for permissions.
This allowed non-writable files to be writable in the overlay.
Fixes #316
PiperOrigin-RevId: 255263686
|
|
If we have a symlink whose target does not exist, creating the symlink (either
via 'creat' or 'open' with O_CREAT flag) should create the target of the
symlink. Previously, gVisor would error with EEXIST in this case
PiperOrigin-RevId: 255232944
|
|
Go was going to change the behavior of SysProcAttr.Ctty such that it must be an
FD in the *parent* FD table:
https://go-review.googlesource.com/c/go/+/178919/
However, after some debate, it was decided that this change was too
backwards-incompatible, and so it was reverted.
https://github.com/golang/go/issues/29458
The behavior going forward is unchanged: the Ctty FD must be an FD in the
*child* FD table.
PiperOrigin-RevId: 255228476
|
|
Updates #179
PiperOrigin-RevId: 255081565
|
|
To accompany flipcall connections in cases where passing FDs is required
(as for gofers).
PiperOrigin-RevId: 255062277
|
|
An upcoming change in Go 1.13 [1] changes the semantics of the SysProcAttr.Ctty
field. Prior to the change, the FD must be an FD in the child process's FD
table (aka "post-shuffle"). After the change, the FD must be an FD in the
current process's FD table (aka "pre-shuffle").
To be compatible with both versions this CL introduces a new boolean
"CttyFdIsPostShuffle" which indicates whether a pre- or post-shuffle FD should
be provided. We use build tags to chose the correct one.
1: https://go-review.googlesource.com/c/go/+/178919/
PiperOrigin-RevId: 255015303
|
|
Credentials are immutable and even before these changes we could read them
without locks, but we needed to take a task lock to get a credential object
from a task object.
It is possible to avoid this lock, if we will guarantee that a credential
object will not be changed after setting it on a task.
PiperOrigin-RevId: 254989492
|
|
When we reopen file by path, we can't be sure that
we will open exactly the same file. The file can be
deleted and another one with the same name can be
created.
PiperOrigin-RevId: 254898594
|
|
For files with O_APPEND, a file write operation gets a file size and uses it as
offset to call an inode write operation. This means that all other operations
which can change a file size should be blocked while the write operation doesn't
complete.
PiperOrigin-RevId: 254873771
|