summaryrefslogtreecommitdiffhomepage
AgeCommit message (Collapse)Author
2020-10-23Support getsockopt for SO_ACCEPTCONN.Nayana Bidari
The SO_ACCEPTCONN option is used only on getsockopt(). When this option is specified, getsockopt() indicates whether socket listening is enabled for the socket. A value of zero indicates that socket listening is disabled; non-zero that it is enabled. PiperOrigin-RevId: 338703206
2020-10-23Do not hold NIC local address in neighbor entriesGhanan Gowripalan
Previously, the NIC local address used when completing link resolution was held in the neighbor entry. A neighbor is not identified by any NIC local address so remove it. PiperOrigin-RevId: 338699695
2020-10-23Decrement e.synRcvdCount once handshake is complete.Bhasker Hariharan
Earlier the count was dropped only after calling e.deliverAccepted. This lead to an issue where there were no connections in SYN-RCVD state for the listening endpoint but e.synRcvdCount would not be zero because it was being reduced only when handleSynSegment returned after deliverAccepted returned. This issue is seen when the Nth SYN for a listen backlog of size N which would cause the listen backlog to be full gets dropped occasionally. This happens when the new SYN comes at when the previous completed endpoint has been delivered to the accept queue but the synRcvdCount hasn't yet been decremented because the goroutine running handleSynSegment has not yet completed. PiperOrigin-RevId: 338690646
2020-10-23Rewrite reference leak checker without finalizers.Dean Deng
Our current reference leak checker uses finalizers to verify whether an object has reached zero references before it is garbage collected. There are multiple problems with this mechanism, so a rewrite is in order. With finalizers, there is no way to guarantee that a finalizer will run before the program exits. When an unreachable object with a finalizer is garbage collected, its finalizer will be added to a queue and run asynchronously. The best we can do is run garbage collection upon sandbox exit to make sure that all finalizers are enqueued. Furthermore, if there is a chain of finalized objects, e.g. A points to B points to C, garbage collection needs to run multiple times before all of the finalizers are enqueued. The first GC run will register the finalizer for A but not free it. It takes another GC run to free A, at which point B's finalizer can be registered. As a result, we need to run GC as many times as the length of the longest such chain to have a somewhat reliable leak checker. Finally, a cyclical chain of structs pointing to one another will never be garbage collected if a finalizer is set. This is a well-known issue with Go finalizers (https://github.com/golang/go/issues/7358). Using leak checking on filesystem objects that produce cycles will not work and even result in memory leaks. The new leak checker stores reference counted objects in a global map when leak check is enabled and removes them once they are destroyed. At sandbox exit, any remaining objects in the map are considered as leaked. This provides a deterministic way of detecting leaks without relying on the complexities of finalizers and garbage collection. This approach has several benefits over the former, including: - Always detects leaks of objects that should be destroyed very close to sandbox exit. The old checker very rarely detected these leaks, because it relied on garbage collection to be run in a short window of time. - Panics if we forgot to enable leak check on a ref-counted object (we will try to remove it from the map when it is destroyed, but it will never have been added). - Can store extra logging information in the map values without adding to the size of the ref count struct itself. With the size of just an int64, the ref count object remains compact, meaning frequent operations like IncRef/DecRef are more cache-efficient. - Can aggregate leak results in a single report after the sandbox exits. Instead of having warnings littered in the log, which were non-deterministically triggered by garbage collection, we can print all warning messages at once. Note that this could also be a limitation--the sandbox must exit properly for leaks to be detected. Some basic benchmarking indicates that this change does not significantly affect performance when leak checking is enabled, which is understandable since registering/unregistering is only done once for each filesystem object. Updates #1486. PiperOrigin-RevId: 338685972
2020-10-22Load spec during "runsc start" to process flag overridesFabricio Voznika
Subcontainers are only configured when the container starts, however because start doesn't load the spec, flag annotations that may override flags were not getting applied to the configuration. Updates #3494 PiperOrigin-RevId: 338610953
2020-10-22Add a platform portability blog postIan Lewis
Also fixes the docker_image bazel rule, and website-server make target. Fixes #3273 PiperOrigin-RevId: 338606668
2020-10-22Pass NetworkInterface to LinkAddressRequestGhanan Gowripalan
Previously a link endpoint was passed to stack.LinkAddressResolver.LinkAddressRequest. With this change, implementations that want a route for the link address request may find one through the stack. Other implementations that want to send a packet without a route may continue to do so using the network interface directly. Test: - arp_test.TestLinkAddressRequest - ipv6.TestLinkAddressRequest PiperOrigin-RevId: 338577474
2020-10-22[bazel] Reduce number of jobs to 100.Ayush Ranjan
PiperOrigin-RevId: 338517024
2020-10-21Add underflow check when calculating the MTUArthur Sfez
Also enforce the minimum MTU for IPv4 and IPv6, and discard packets if the minimum is not met. PiperOrigin-RevId: 338404225
2020-10-21Check for nil in kernel.FSContext functions.Dean Deng
Reported-by: syzbot+c0e175d2b10708314eb3@syzkaller.appspotmail.com PiperOrigin-RevId: 338386575
2020-10-21Merge pull request #3957 from workato:auto-cgroupgVisor bot
PiperOrigin-RevId: 338372736
2020-10-21Merge pull request #4535 from lubinszARM:pr_kvm_exec_binary_1gVisor bot
PiperOrigin-RevId: 338321125
2020-10-20test/runtime: set the NOFILE soft rlimit to 32KAndrei Vagin
The python:test_subprocess enumerates all possible file descriptors and fails by timeout if the limit is too high. There is a know thing about docker that it sets this limit to 1M by default, but on native linux, this limit will be between 1K to 32K. PiperOrigin-RevId: 338197239
2020-10-20Do not even try forcing cgroups in testsKonstantin Baranov
2020-10-20Fix errors when the tagging GitHub releasesTing-Yu Wang
When the commit description contains "commit ", it will be wrongly identified as commit hash. This commit changes to take only lines begins with "commit " as a fix, since the description is always indented by `git log`. Copybara uses merge commit for external contributors, this causes that not all commits contain a Piper ID. Adding `--first-parent` to `git log` so that it only lists commits that contain a Piper ID. PiperOrigin-RevId: 338183812
2020-10-20Fix nogo test in //pkg/tcpip/...Ting-Yu Wang
PiperOrigin-RevId: 338168977
2020-10-20[runtime tests] Update exclude files.Ayush Ranjan
bhaskerh@ fixed a bunch of the EADDRINUSE flakes in #3662 so we should unexclude them. I have also tested other flaky tests on this list and removed those that do not flake anymore. PiperOrigin-RevId: 338158545
2020-10-20Fix locking in AddressableEndpointStateGhanan Gowripalan
PiperOrigin-RevId: 338156438
2020-10-20Fix nogo tests.Ting-Yu Wang
//pkg/tcpip/stack:stack_x_test_nogo //pkg/tcpip/transport/raw:raw_nogo PiperOrigin-RevId: 338153265
2020-10-20Merge pull request #4524 from lemin9538:lemin_arm64gVisor bot
PiperOrigin-RevId: 338126491
2020-10-20Add /dev to mandatory mounts testFabricio Voznika
PiperOrigin-RevId: 338072845
2020-10-19loader/elf: validate file offsetAndrei Vagin
Reported-by: syzbot+7406eef8247cb5a20855@syzkaller.appspotmail.com PiperOrigin-RevId: 337974474
2020-10-19Fix reference counting on kcov mappings.Dean Deng
Reported-by: syzbot+078580ce5dd6d607fcd8@syzkaller.appspotmail.com Reported-by: syzbot+2096681f6891e7bf8aed@syzkaller.appspotmail.com PiperOrigin-RevId: 337973519
2020-10-19Merge pull request #4510 from btw616:fix/issue-4509gVisor bot
PiperOrigin-RevId: 337971497
2020-10-19Fix runsc tests on VFS2 overlay.Jamie Liu
- Check the sticky bit in overlay.filesystem.UnlinkAt(). Fixes StickyTest.StickyBitPermDenied. - When configuring a VFS2 overlay in runsc, copy the lower layer's root owner/group/mode to the upper layer's root (as in the VFS1 equivalent, boot.addOverlay()). This makes the overlay root owned by UID/GID 65534 with mode 0755 rather than owned by UID/GID 0 with mode 01777. Fixes CreateTest.CreateFailsOnUnpermittedDir, which assumes that the test cannot create files in /. - MknodTest.UnimplementedTypesReturnError assumes that the creation of device special files is not supported. However, while the VFS2 gofer client still doesn't support device special files, VFS2 tmpfs does, and in the overlay test dimension mknod() targets a tmpfs upper layer. The test initially has all capabilities, including CAP_MKNOD, so its creation of these files succeeds. Constrain these tests to VFS1. - Rename overlay.nonDirectoryFD to overlay.regularFileFD and only use it for regular files, using the original FD for pipes and device special files. This is more consistent with Linux (which gets the original inode_operations, and therefore file_operations, for these file types from ovl_fill_inode() => init_special_inode()) and fixes remaining mknod and pipe tests. - Read/write 1KB at a time in PipeTest.Streaming, rather than 4 bytes. This isn't strictly necessary, but it makes the test less obnoxiously slow on ptrace. Fixes #4407 PiperOrigin-RevId: 337971042
2020-10-19Remove now unused remote3 configurations.Adin Scannell
PiperOrigin-RevId: 337968219
2020-10-19Remove legacy bazel configurations.Adin Scannell
Using the newer bazel rules necessitates a transition from proto1 to proto2. In order to resolve the incompatibility between proto2 and gogoproto, the cri runtimeoptions proto must be vendored. Further, some of the semantics of bazel caching changed during the transition. It is now necessary to: - Ensure that :gopath depends only on pure library targets, as the propagation of go_binary build attributes (pure, static) will affected the generated files (though content remains the same, there are conflicts with respect to the gopath). - Update bazel.mk to include the possibility of binaries in the bazel-out directory, as it will now put runsc and others there. This required some refinements to the mechanism of extracting paths, since some the existing regex resulted in false positives. - Change nogo rules to prevent escape generation on binary targets. For some reason, the newer version of bazel attempted to run the nogo analysis on the binary targets, which fails due to the fact that objdump does not work on the final binary. This must be due to a change in the semantics of aspects in bazel3. PiperOrigin-RevId: 337958324
2020-10-19Fixes to cgroupsFabricio Voznika
There were a few problems with cgroups: - cleanup loop what breaking too early - parse of /proc/[pid]/cgroups was skipping "name=systemd" because "name=" was not being removed from name. - When no limits are specified, fillFromAncestor was not being called, causing a failure to set cpuset.mems Updates #4536 PiperOrigin-RevId: 337947356
2020-10-19[vfs2] Fix fork reference leaks.Dean Deng
PiperOrigin-RevId: 337919424
2020-10-19splice: return EINVAL is len is negativeAndrei Vagin
Reported-by: syzbot+0268cc591c0f517a1de0@syzkaller.appspotmail.com PiperOrigin-RevId: 337901664
2020-10-19pgalloc: Do not hold MemoryFile.mu while calling mincore.Ayush Ranjan
This change makes the following changes: - Unlocks MemoryFile.mu while calling mincore (checkCommitted) because mincore can take a really long time. Accordingly looks up the segment in the tree tree again and handles changes to the segment. - MemoryFile.UpdateUsage() can now only be called at frequency at most 100Hz. 100 Hz = linux.CLOCKS_PER_SEC. Co-authored-by: Jamie Liu <jamieliu@google.com> PiperOrigin-RevId: 337865250
2020-10-18arm64 kvm: handle exception from accessing undefined instructionBin Lu
Consistent with the linux approach, we will produce a sigill to handle el0_undef. After applying this patch, exec_binary_test_runsc_kvm will be passed on Arm64. Signed-off-by: Bin Lu <bin.lu@arm.com>
2020-10-16Refactor shared starlark files.Adin Scannell
PiperOrigin-RevId: 337581114
2020-10-16Use POSIX interval timers in flock test.Dean Deng
ualarm(2) is obsolete. Move IntervalTimer into a test util, where it can be used by flock tests. These tests were flaky with TSAN, probably because it slowed the tests down enough that the alarm was expiring before flock() was called. Use an interval timer so that even if we miss the first alarm (or more), flock() is still guaranteed to be interrupted. PiperOrigin-RevId: 337578751
2020-10-16Don't include link header when forwarding packetsGhanan Gowripalan
Before this change, if a link header was included in an incoming packet that is forwarded, the packet that gets sent out will take the original packet and add a link header to it while keeping the old link header. This would make the sent packet look like: OUTGOING LINK HDR | INCOMING LINK HDR | NETWORK HDR | ... Obviously this is incorrect as we should drop the incoming link header and only include the outgoing link header. This change fixes this bug. Test: integration_test.TestForwarding PiperOrigin-RevId: 337571447
2020-10-16Make IPv4 check the IP header checksumJulian Elischer
The IPv4 header checksum has not been checked, at least in recent times, so add code to do so. Fix all the tests that fail because they never needed to set the checksum. Fixes #4484 PiperOrigin-RevId: 337556243
2020-10-16Enable IPv4 fragmentation for every code path.Arthur Sfez
Currently, fragmentation can only occur during WritePacket(). This enables it for WritePackets() and WriteIncludedHeaderPacket() as well. IPv4 unit tests were refactored to be consistent with the IPv6 unit tests. This removes the extraHeaderReserveLength field and the related "prependable bytes" unit tests (for both IPv4 and IPv6) because it was only testing a panic condition when the value was too low. Fixes #3796 PiperOrigin-RevId: 337550061
2020-10-16Merge pull request #4387 from lubinszARM:pr_tls_host_sentry_1gVisor bot
PiperOrigin-RevId: 337544656
2020-10-16Refactor nogo to better support ARM.Adin Scannell
PiperOrigin-RevId: 337544107
2020-10-16Enable IPv6 WriteHeaderIncludedPacketGhanan Gowripalan
Allow writing an IPv6 packet where the IPv6 header is a provided by the user. * Introduce an error to let callers know a header is malformed. We previously useed tcpip.ErrInvalidOptionValue but that did not seem appropriate for generic malformed header errors. * Populate network header in WriteHeaderIncludedPacket IPv4's implementation of WriteHeaderIncludedPacket did not previously populate the packet buffer's network header. This change fixes that. Fixes #4527 Test: ip_test.TestWriteHeaderIncludedPacket PiperOrigin-RevId: 337534548
2020-10-16Cache errors when processing stdlib with nogo.Adin Scannell
PiperOrigin-RevId: 337515664
2020-10-15sockets: ignore io.EOF from view.ReadAtAndrei Vagin
Reported-by: syzbot+5466463b7604c2902875@syzkaller.appspotmail.com PiperOrigin-RevId: 337451896
2020-10-15`runsc do` fallback to internal network on failureFabricio Voznika
In case setting up network fails, log a warning and fallback to internal network. Closes #4498 PiperOrigin-RevId: 337442632
2020-10-15Add easier-to-use docker_image target.Adin Scannell
PiperOrigin-RevId: 337415009
2020-10-15Syncing packetimpact tests in different directoriesZeling Feng
By exposing an ALL_TESTS list in defs.bzl we can make sure all packetimpact users get to agree on the list of all tests. A defect in this approach is that we have to keep a list of packetimpact_testbench rules in the BUILD file. An helper validate_all_tests has been added to help keep BUILD and .bzl files in sync. PiperOrigin-RevId: 337411839
2020-10-15Process NAs without target link-layer addressesSam Balana
RFC 4861 section 4.4 comments the Target link-layer address option is sometimes optional in a Neighbor Advertisement packet: "When responding to a unicast Neighbor Solicitation this option SHOULD be included." Tests: pkg/tcpip/stack:stack_test - TestEntryStaleToReachableWhenSolicitedConfirmationWithoutAddress - TestEntryDelayToReachableWhenSolicitedConfirmationWithoutAddress - TestEntryProbeToReachableWhenSolicitedConfirmationWithoutAddress pkg/tcpip/network/ipv6:ipv6_test - TestCallsToNeighborCache PiperOrigin-RevId: 337396493
2020-10-15Change verity isEnable to be a member of dentryChong Cai
PiperOrigin-RevId: 337384146
2020-10-15Refactor compareFragments to follow Go styleArthur Sfez
Test helpers should be used for test setup/teardown, not actual testing. Use cmp.Diff instead of bytes.Equal to improve readability. PiperOrigin-RevId: 337323242
2020-10-15arm64: the ASID offset of TTBR register is 48Min Le
Signed-off-by: Min Le <lemin.lm@antgroup.com>
2020-10-14Find route before sending NA responseGhanan Gowripalan
This change also brings back the stack.Route.ResolveWith method so that we can immediately resolve a route when sending an NA in response to a a NS with a source link layer address option. Test: ipv6_test.TestNeighorSolicitationResponse PiperOrigin-RevId: 337185461
generated by cgit v1.2.3 (git 2.39.1) at 2024-11-19 00:39:45 +0000