Age | Commit message (Collapse) | Author |
|
Currently there is a problem with the preservation of usr-tls, which leads
to the contamination of sentry tls.
Signed-off-by: Bin Lu <bin.lu@arm.com>
|
|
PiperOrigin-RevId: 334263322
|
|
When the socket is set with SO_LINGER and close()'d in the initial state, it
should not linger and return immediately.
PiperOrigin-RevId: 334263149
|
|
Network or transport protocols may want to reach the stack. Support this
by letting the stack create the protocol instances so it can pass a
reference to itself at protocol creation time.
Note, protocols do not yet use the stack in this CL but later CLs will
make use of the stack from protocols.
PiperOrigin-RevId: 334260210
|
|
Fixes #1479, #317.
PiperOrigin-RevId: 334258052
|
|
Do not release dirMu between checking whether to create a child and actually
inserting it.
Also fixes a bug in fusefs which was causing it to deadlock under the new
lock ordering. We do not need to call kernfs.Dentry.InsertChild from newEntry
because it will always be called at the kernfs filesystem layer.
Updates #1193.
PiperOrigin-RevId: 334049264
|
|
Previously, we did not check the kcov mode when performing task work. As a
result, disabling kcov did not do anything.
Also avoid expensive atomic RMW when consuming coverage data. We don't need the
swap if the value is already zero (which is most of the time), and it is ok if
there are slight inconsistencies due to a race between coverage data generation
(incrementing the value) and consumption (reading a nonzero value and writing
zero).
PiperOrigin-RevId: 334049207
|
|
Generic ICMP errors were required because the transport dispatcher was
given the responsibility of sending ICMP errors in response to transport
packet delivery failures. Instead, the transport dispatcher should let
network layer know it failed to deliver a packet (and why) and let the
network layer make the decision as to what error to send (if any).
Fixes #4068
PiperOrigin-RevId: 333962333
|
|
PiperOrigin-RevId: 333853498
|
|
Regarding ThreadCpuTimeArray.java: The test starts 10 threads, each of which
does some computation, then blocks. When all threads are blocked, the test
sleeps for 200ms, then checks that less than 100ns of CPU time in userspace
elapse over the course of the sleep; AFAICT, the 100ns of slop is because a
thread indicates that it's in the WAITING state before it actually blocks, and
because signals can cause threads to be temporarily woken. gVisor's CPU clocks
have a granularity of 10ms (the interval of Kernel.cpuClockTicker is
//pkg/abi/linux.ClockTick), so a single tick pushes the test over the
threshold.
PiperOrigin-RevId: 333830287
|
|
PiperOrigin-RevId: 333805533
|
|
As open syscall is not support on ARM64, change syscall
from 'open' to 'openat' in no_match_name_allow
Signed-off-by: Howard Zhang <howard.zhang@arm.com>
|
|
based on arch, apply different syscall number for
sched_rr_get_interval
Signed-off-by: Howard Zhang <howard.zhang@arm.com>
|
|
PiperOrigin-RevId: 333611788
|
|
PiperOrigin-RevId: 333591566
|
|
The FD should hold a reference on the dentry they were opened on which in turn
holds a reference on the inode it points to.
PiperOrigin-RevId: 333589223
|
|
PiperOrigin-RevId: 333588387
|
|
The previous value was for unix
PiperOrigin-RevId: 333571962
|
|
Update signatures for:
- All methods in inodeDirectory
- deferDecRef() and Filesystem.droppedDentries
- newSyntheticDirectory()
- `slot`s used in OrderedChildren and subsequent methods like
replaceChildLocked() and checkExistingLocked()
- stepExistingLocked(), walkParentDirLocked(), checkCreateLocked()
Updates #1193
PiperOrigin-RevId: 333558866
|
|
Changes in Nginx Benchmarks in network_tests also affect Startup/Size
Nginx Benchmarks. Make sure the commands line up.
PiperOrigin-RevId: 333543697
|
|
Updates #1663
PiperOrigin-RevId: 333539293
|
|
segment_queue today has its own standalone limit of MaxUnprocessedSegments but
this can be a problem in UnlockUser() we do not release the lock till there are
segments to be processed. What can happen is as handleSegments dequeues packets
more keep getting queued and we will never release the lock. This can keep
happening even if the receive buffer is full because nothing can read() till we
release the lock.
Further having a separate limit for pending segments makes it harder to track
memory usage etc. Unifying the limits makes it easier to reason about memory in
use and makes the overall buffer behaviour more consistent.
PiperOrigin-RevId: 333508122
|
|
PiperOrigin-RevId: 333461380
|
|
PiperOrigin-RevId: 333454489
|
|
It is called from the kernfs code (OpenAt and revalidateChildLocked()).
For RemoveChildLocked, it is opposed. We need to call it from fuse.RmDir and
fuse.Unlink.
PiperOrigin-RevId: 333453218
|
|
Mostly simplifies SKIP_IF statements and adds some more documentation.
Also, mknod is now supported by gofer fs, so remove SKIP_IFs related to this.
PiperOrigin-RevId: 333449932
|
|
PiperOrigin-RevId: 333447255
|
|
|
|
There were some instances where we were not enabling leak checking.
PiperOrigin-RevId: 333418571
|
|
PiperOrigin-RevId: 333412836
|
|
PiperOrigin-RevId: 333408633
|
|
PiperOrigin-RevId: 333405169
|
|
PiperOrigin-RevId: 333404727
|
|
PiperOrigin-RevId: 333400865
|
|
PiperOrigin-RevId: 333287864
|
|
Store transport protocol number on packet buffers for use in ICMP error
generation.
Updates #2211.
PiperOrigin-RevId: 333252762
|
|
Use HandleIOErrorVFS2 instead of custom error handling.
PiperOrigin-RevId: 333227581
|
|
This change changes `buffer.data` into a `[]byte`, from `[bufferSize]byte`.
In exchange, each `buffer` is now grouped together to reduce the number of
allocation. Plus, `View` now holds an embeded list of `buffer` (via `pool`) to
support the happy path which the number of buffer is small. Expect no extra
allocation for the happy path.
It is to enable the use case for PacketBuffer, which
* each `View` is small (way less than `defaultBufferSize`), and
* needs to dynamically transfer ownership of `[]byte` to `View`.
(to allow gradual migration)
PiperOrigin-RevId: 333197252
|
|
The new testutil.MockLinkEndpoint implementation is not composed by
channel.Channel anymore because none of its features were used.
PiperOrigin-RevId: 333167753
|
|
Update signatures for:
- walkExistingLocked
- checkDeleteLocked
- Inode.Open
Updates #1193
PiperOrigin-RevId: 333163381
|
|
When printing flags, FlagSet.PrintDefaults compares the Zero
value to the flag default value. The Zero refs.LeakMode value
was panicking in String() because it didn't expect the default
to be used
Closes #4023
PiperOrigin-RevId: 333150836
|
|
PiperOrigin-RevId: 333138701
|
|
https://go.googlesource.com/go/+/0941fc3 switches the Go runtime (on amd64)
from using arch_prctl(ARCH_SET_FS) to CLONE_SETTLS to set the TLS.
PiperOrigin-RevId: 333100550
|
|
Neither CLONE_PARENT_SETTID nor CLONE_CHILD_SETTID are used, so these arguments
will always be NULL.
PiperOrigin-RevId: 333085326
|
|
Originally, we avoided partial writes in case it caused us to write a partial
packet to a socket-backed specialFileFD. However, this check causes splicing
from a pipe to specialFileFD to fail if we hit EOF on the pipe.
PiperOrigin-RevId: 333016216
|
|
PiperOrigin-RevId: 332961666
|
|
It containes full instructions to download and install
runsc with Docker now.
PiperOrigin-RevId: 332960337
|
|
Calls to recv sometimes fail with EAGAIN, so call select beforehand.
PiperOrigin-RevId: 332943156
|
|
Updates #1193.
PiperOrigin-RevId: 332939026
|
|
"DefaultValueEqZero" is only valid if the test is in a
sandbox. Our CI VMs often have "/proc/sys/net/ipv4/ip_forward" set
to 1.
PiperOrigin-RevId: 332910859
|