Age | Commit message (Collapse) | Author |
|
Also while I'm here, update neighbor cahce/entry tests to use the
stack's RNG instead of creating a neigbor cache/entry specific one.
PiperOrigin-RevId: 356040581
|
|
The NIC structure is not to be used outside of the stack package
directly.
PiperOrigin-RevId: 356036737
|
|
Network endpoints that wish to check addresses on another NIC-local
network endpoint may now do so through the NetworkInterface.
This fixes a lock ordering issue between NIC removal and link
resolution. Before this change:
NIC Removal takes the stack lock, neighbor cache lock then neighbor
entries' locks.
When performing IPv4 link resolution, we take the entry lock then ARP
would try check IPv4 local addresses through the stack which tries to
obtain the stack's lock.
Now that ARP can check IPv4 addreses through the NIC, we avoid the lock
ordering issue, while also removing the need for stack to lookup the
NIC.
PiperOrigin-RevId: 356034245
|
|
After IPTables checks a batch of packets, we can write packets that are
not dropped or locally destined as a batch instead of individually.
This previously caused a bug since WritePacket* functions expect to take
ownership of passed PacketBuffer{List}. WritePackets assumed the list of
PacketBuffers will not be invalidated when calling WritePacket for each
PacketBuffer in the list, but this is not true. WritePacket may add the
passed PacketBuffer into a different list which would modify the
PacketBuffer in such a way that it no longer points to the next
PacketBuffer to write.
Example: Given a PB list of
PB_a -> PB_b -> PB_c
WritePackets may be iterating over the list and calling WritePacket for
each PB. When WritePacket takes PB_a, it may add it to a new list which
would update pointers such that PB_a no longer points to PB_b.
Test: integration_test.TestIPTableWritePackets
PiperOrigin-RevId: 355969560
|
|
Panic seen at some code path like control.ExecAsync where
ctx does not have a Task.
Reported-by: syzbot+55ce727161cf94a7b7d6@syzkaller.appspotmail.com
PiperOrigin-RevId: 355960596
|
|
According to vfs.FilesystemImpl.RenameAt documentation:
- If the last path component in rp is "." or "..", and opts.Flags contains
RENAME_NOREPLACE, RenameAt returns EEXIST.
- If the last path component in rp is "." or "..", and opts.Flags does not
contain RENAME_NOREPLACE, RenameAt returns EBUSY.
Reported-by: syzbot+6189786e64fe13fe43f8@syzkaller.appspotmail.com
PiperOrigin-RevId: 355959266
|
|
Make it clear that failing to parse a looped back is not a packet
sending error but a malformed received packet error.
FindNetworkEndpoint returns nil when no network endpoint is found
instead of an error.
PiperOrigin-RevId: 355954946
|
|
PiperOrigin-RevId: 355915778
|
|
PiperOrigin-RevId: 355751801
|
|
Some versions of the Go runtime call getcpu(), so add it for compatibility. The
hostcpu package already uses getcpu() on arm64.
PiperOrigin-RevId: 355717757
|
|
PiperOrigin-RevId: 355675900
|
|
PiperOrigin-RevId: 355660221
|
|
PiperOrigin-RevId: 355645297
|
|
Instead build the executable into the image.
PiperOrigin-RevId: 355631672
|
|
Our implementation of vfs.CheckDeleteSticky was not consistent with Linux,
specifically not consistent with fs/linux.h:check_sticky().
One of the biggest differences was that the vfs implementation did not
allow the owner of the sticky directory to delete files inside it that belonged
to other users.
This change makes our implementation consistent with Linux.
Also adds an integration test to check for this. This bug is also present in
VFS1.
Updates #3027
PiperOrigin-RevId: 355557425
|
|
PiperOrigin-RevId: 355506299
|
|
Confirmed gazelle generates no significant noise.
Fix documented gazelle invocation while I'm here.
PiperOrigin-RevId: 355452758
|
|
PiperOrigin-RevId: 355449206
|
|
- Adds a function to enable RACK in tests.
- RACK update functions are guarded behind the flag tcpRecovery.
PiperOrigin-RevId: 355435973
|
|
PiperOrigin-RevId: 355434313
|
|
PiperOrigin-RevId: 355324521
|
|
PiperOrigin-RevId: 355315140
|
|
...and a bunch of other things as I worked through the rot. Notably:
- Upgrade to bazel 4.0.0
- Upgrade to Go 1.15.7
Remove go_branch stderr suppression; this made it quite difficult to see
what was failing while developing this patch.
PiperOrigin-RevId: 355257833
|
|
This was missed in cl/351911375; pipe.VFSPipeFD.SpliceFromNonPipe already calls
Notify.
PiperOrigin-RevId: 355246655
|
|
PiperOrigin-RevId: 355242055
|
|
Rename HandleNDupAcks() to HandleLossDetected() as it will enter this when
is detected after:
- reorder window expires and TLP (in case of RACK)
- dupAckCount >= 3
PiperOrigin-RevId: 355237858
|
|
Because we lack gVisor-internal cgroups, we take the CPU usage of the entire pod
and divide it proportionally according to sentry-internal usage stats.
This fixes `kubectl top pods`, which gets a pod's CPU usage by summing the usage
of its containers.
Addresses #172.
PiperOrigin-RevId: 355229833
|
|
This allows the package to serve as a general purpose ring0 support package, as
opposed to being bound to specific sentry platforms.
Updates #5039
PiperOrigin-RevId: 355220044
|
|
Reported-by: syzbot+db8d83f93b84fcb84374@syzkaller.appspotmail.com
PiperOrigin-RevId: 355213994
|
|
This is replaced with a straight call to bazel. Unfortunately,
the built gazelle target requires a bazel installation to run
anyways.
PiperOrigin-RevId: 355211990
|
|
Netstack today will send dupACK's with no rate limit for incoming out of
window segments. This can result in ACK loops for example if a TCP socket
connects to itself (actually permitted by TCP). Where the ACK sent in
response to packets being out of order itself gets considered as an out
of window segment resulting in another ACK being generated.
PiperOrigin-RevId: 355206877
|
|
This is required only for the built-in bazel nogo functionality.
Since we roll these targets manually via the wrappers, we don't need
to use go_tool_library. The inconsistent use of these targets leads
to conflicting instantiations of go_default_library and go_tool_library,
which both contain the same output files.
PiperOrigin-RevId: 355184975
|
|
Also sync syscall test expectations on Fuchisa.
PiperOrigin-RevId: 355163492
|
|
* Make split safe.
* Enable looking up next valid address.
* Support mappings with !accessType.Any(), distinct from unmap.
These changes allow for the use of pagetables in low-level OS packages, such
as ring0, and allow for the use of pagetables for more generic address space
reservation (by writing entries with no access specified).
Updates #5039
PiperOrigin-RevId: 355109016
|
|
This change also adds an extra sanity check to the make_apt.sh script,
in order to ensure that this simple mistake does not occur again.
PiperOrigin-RevId: 355101754
|
|
Updates #1663
PiperOrigin-RevId: 355077816
|
|
PiperOrigin-RevId: 355067082
|
|
It's unclear why permissions wind up corrupted, but these can be cleared
on any failure, similar to the bazel cache itself:
https://buildkite.com/gvisor/pipeline/builds/2304#_
PiperOrigin-RevId: 355057421
|
|
PiperOrigin-RevId: 355047815
|
|
This makes it easier to add more tests that run on Ubuntu. We can now just
add a bash script and call that from integration_test without having to set up
another image.
PiperOrigin-RevId: 355000410
|
|
|
|
Provide appropriate capabilities and adjust Docker socket.
|
|
|
|
...to remove the need for the transport layer to deduce the type of
error it received.
Rename HandleControlPacket to HandleError as HandleControlPacket only
handles errors.
tcpip.SockError now holds a tcpip.SockErrorCause interface that
different errors can implement.
PiperOrigin-RevId: 354994306
|
|
PiperOrigin-RevId: 354991724
|
|
...to prevent panicking in case of failure.
PiperOrigin-RevId: 354970257
|
|
This change flips gvisor to use Neighbor unreachability detection by
default to populate the neighbor table as defined by RFC 4861 section 7.
Although RFC 4861 is targeted at IPv6, the same algorithm is used for
link resolution on IPv4 networks using ARP.
Integrators may still use the legacy link address cache by setting
stack.Options.UseLinkAddrCache to true; stack.Options.UseNeighborCache
is now unused and will be removed.
A later change will remove linkAddrCache and associated code.
Updates #4658.
PiperOrigin-RevId: 354850531
|
|
PiperOrigin-RevId: 354827491
|
|
...in IPv6 ICMP tests.
A channel link endpoint's channel is closed when the link endpoint is
closed.
When the stack tries to send packets through a NIC with a closed channel
endpoint, a panic will occur when attempting to write to a closed
channel (https://golang.org/ref/spec#Close). To make sure the stack does
not try to send packets through a NIC, we remove it.
PiperOrigin-RevId: 354822085
|
|
This stores each protocol's neighbor state separately.
This change also removes the need for each neighbor entry to keep
track of their own link address resolver now that all the entries
in a cache will use the same resolver.
PiperOrigin-RevId: 354818155
|