| Age | Commit message (Collapse) | Author |
|---|
|
PiperOrigin-RevId: 251902567
|
|
Containerd uses the last error message sent to the log to
print as failure cause for create/exec. This required a
few changes in the logging logic for runsc:
- cmd.Errorf/Fatalf: now writes a message with 'error'
level to containerd log, in addition to stderr and
debug logs, like before.
- log.Infof/Warningf/Fatalf: are not sent to containerd
log anymore. They are mostly used for debugging and not
useful to containerd. In most cases, --debug-log is
enabled and this avoids the logs messages from being
duplicated.
- stderr is not used as default log destination anymore.
Some commands assume stdio is for the container/process
running inside the sandbox and it's better to never use
it for logging. By default, logs are supressed now.
PiperOrigin-RevId: 251881815
|
|
This allows an fdbased endpoint to have multiple underlying fd's from which
packets can be read and dispatched/written to.
This should allow for higher throughput as well as better scalability of the
network stack as number of connections increases.
Updates #231
PiperOrigin-RevId: 251852825
|
|
PiperOrigin-RevId: 251788534
|
|
This is required to make the shutdown visible to peers outside the
sandbox.
The readClosed / writeClosed fields were dropped, as they were
preventing a shutdown socket from reading the remainder of queued bytes.
The host syscalls will return the appropriate errors for shutdown.
The control message tests have been split out of socket_unix.cc to make
the (few) remaining tests accessible to testing inherited host UDS,
which don't support sending control messages.
Updates #273
PiperOrigin-RevId: 251763060
|
|
In case of GSO, a segment can container more than one packet
and we need to use the pCount() helper to get a number of packets.
PiperOrigin-RevId: 251743020
|
|
Multicast packets are special in that their destination address does not
identify a specific interface. When sending out such a packet the multicast
address is the remote address, but for incoming packets it is the local
address. Hence, when looping a multicast packet, the route needs to be
tweaked to reflect this.
PiperOrigin-RevId: 251739298
|
|
PiperOrigin-RevId: 251737069
|
|
PiperOrigin-RevId: 251716439
|
|
We don't actually support core dumps, but some applications want to
get/set dumpability, which still has an effect in procfs.
Lack of support for set-uid binaries or fs creds simplifies things a
bit.
As-is, processes started via CreateProcess (i.e., init and sentryctl
exec) have normal dumpability. I'm a bit torn on whether sentryctl exec
tasks should be dumpable, but at least since they have no parent normal
UID/GID checks should protect them.
PiperOrigin-RevId: 251712714
|
|
PiperOrigin-RevId: 251583707
|
|
When checking the length of the acceptedChan we should hold the
endpoint mutex otherwise a syn received while the listening socket
is being closed can result in a data race where the cleanupLocked
routine sets acceptedChan to nil while a handshake goroutine
in progress could try and check it at the same time.
PiperOrigin-RevId: 251537697
|
|
When pipe is created, a dirent of pipe will be
created and its initial reference is set as 0.
Cause all dirent will only be destroyed when
the reference decreased to -1, so there is already
a 'initial reference' of dirent after it created.
For destroying dirent after all reference released,
the correct way is to drop the 'initial reference'
once someone hold a reference to the dirent, such
as fs.NewFile, otherwise the reference of dirent
will stay 0 all the time, and will cause memory
leak of dirent.
Except pipe, timerfd/eventfd/epoll has the same
problem
Here is a simple case to create memory leak of dirent
for pipe/timerfd/eventfd/epoll in C langange, after
run the case, pprof the runsc process, you will
find lots dirents of pipe/timerfd/eventfd/epoll not
freed:
int main(int argc, char *argv[])
{
int i;
int n;
int pipefd[2];
if (argc != 3) {
printf("Usage: %s epoll|timerfd|eventfd|pipe <iterations>\n", argv[0]);
}
n = strtol(argv[2], NULL, 10);
if (strcmp(argv[1], "epoll") == 0) {
for (i = 0; i < n; ++i)
close(epoll_create(1));
} else if (strcmp(argv[1], "timerfd") == 0) {
for (i = 0; i < n; ++i)
close(timerfd_create(CLOCK_REALTIME, 0));
} else if (strcmp(argv[1], "eventfd") == 0) {
for (i = 0; i < n; ++i)
close(eventfd(0, 0));
} else if (strcmp(argv[1], "pipe") == 0) {
for (i = 0; i < n; ++i)
if (pipe(pipefd) == 0) {
close(pipefd[0]);
close(pipefd[1]);
}
}
printf("%s %s test finished\r\n",argv[1],argv[2]);
return 0;
}
Change-Id: Ia1b8a1fb9142edb00c040e44ec644d007f81f5d2
PiperOrigin-RevId: 251531096
|
|
Unfortunately, kokoro names the top-level directory per the SCM type. This
means there's no way to make the job names match; we simply need to probe for
the existence of the correct directory.
PiperOrigin-RevId: 251519409
|
|
Dirents are ref-counted, but Pipes are not. Holding a Dirent inside of a Pipe
raises difficult questions about the lifecycle of the Pipe and Dirent.
Fortunately, we can side-step those questions by removing the Dirent field from
Pipe entirely. We only need the Dirent when constructing fs.Files (which are
ref-counted), and in GetFile (when a Dirent is passed to us anyways).
PiperOrigin-RevId: 251497628
|
|
As a convenience for debugging, also factor the scripts such that
can be run without Kokoro. In the future, this may be used to add
additional presubmit hooks that run without Kokoro.
PiperOrigin-RevId: 251474868
|
|
PiperOrigin-RevId: 251377523
|
|
and don't report a sender address if it doesn't have one
PiperOrigin-RevId: 251371284
|
|
The io.Writer contract requires that Write writes all available
bytes and does not return short writes. This causes errors with
io.Copy, since our own Write interface does not have this same
contract.
PiperOrigin-RevId: 251368730
|
|
No change in functionaly. Added containerMounter object
to keep state while the mounts are processed. This will
help upcoming changes to share mounts per-pod.
PiperOrigin-RevId: 251350096
|
|
clearStatus was added to allow detached execution to wait
on the exec'd process and retrieve its exit status. However,
it's not currently used. Both docker and gvisor-containerd-shim
wait on the "shim" process and retrieve the exit status from
there. We could change gvisor-containerd-shim to use waits, but
it will end up also consuming a process for the wait, which is
similar to having the shim process.
Closes #234
PiperOrigin-RevId: 251349490
|
|
PiperOrigin-RevId: 251347966
|
|
Updates #236
PiperOrigin-RevId: 251337915
|
|
socket_unix_abstract.cc: Subset of socket_abstract.cc
socket_unix_filesystem.cc: Subset of socket_filesystem.cc
PiperOrigin-RevId: 251297117
|
|
Updates #209
PiperOrigin-RevId: 251289513
|
|
PiperOrigin-RevId: 251288885
|
|
Right now, mremap allows to remap a memory region over MaxUserAddress,
this means that we can change the stub region.
PiperOrigin-RevId: 251266886
|
|
The WORKSPACE go_repositories can be generated from a standard go.mod file. Add
the necessary gazelle hooks to do so, and include a test that sanity checks
there are no changes. This go.mod file will be used in a subsequent commit to
generate a go gettable branch of the repository.
This commit also adds a tools/go_branch.sh script, which given an existing go
branch in the repository, will add an additional synthetic change to the branch
bringing it up-to-date with HEAD.
As a final step, a cloudbuild script is included, which can be used to automate
the process for every change pushed to the repository. This may be used after
an initial go branch is pushed, but this is manual process.
PiperOrigin-RevId: 251095016
|
|
PiperOrigin-RevId: 250976665
|
|
Netstack sets the unprocessed segment queue size to match the receive
buffer size. This is not required as this queue only needs to hold enough
for a short duration before the endpoint goroutine can process it.
Updates #230
PiperOrigin-RevId: 250976323
|
|
PiperOrigin-RevId: 250970783
|
|
There is no reason to do the recursion manually, since
Inode.BoundEndpoint will do it for us.
PiperOrigin-RevId: 250794903
|
|
Funcion signatures are not validated during compilation. Since
they are not exported, they can change at any time. The guard
ensures that they are verified at least on every version upgrade.
PiperOrigin-RevId: 250733742
|
|
PiperOrigin-RevId: 250730726
|
|
Netstack listen loop can get stuck if cookies are in-use and the app is slow to
accept incoming connections. Further we continue to complete handshake for a
connection even if the backlog is full. This creates a problem when a lots of
connections come in rapidly and we end up with lots of completed connections
just hanging around to be delivered.
These fixes change netstack behaviour to mirror what linux does as described
here in the following article
http://veithen.io/2014/01/01/how-tcp-backlog-works-in-linux.html
Now when cookies are not in-use Netstack will silently drop the ACK to a SYN-ACK
and not complete the handshake if the backlog is full. This will result in the
connection staying in a half-complete state. Eventually the sender will
retransmit the ACK and if backlog has space we will transition to a connected
state and deliver the endpoint.
Similarly when cookies are in use we do not try and create an endpoint unless
there is space in the accept queue to accept the newly created endpoint. If
there is no space then we again silently drop the ACK as we can just recreate it
when the ACK is retransmitted by the peer.
We also now use the backlog to cap the size of the SYN-RCVD queue for a given
endpoint. So at any time there can be N connections in the backlog and N in a
SYN-RCVD state if the application is not accepting connections. Any new SYNs
will be dropped.
This CL also fixes another small bug where we mark a new endpoint which has not
completed handshake as connected. We should wait till handshake successfully
completes before marking it connected.
Updates #236
PiperOrigin-RevId: 250717817
|
|
Upstream Go has no changes here.
PiperOrigin-RevId: 250602731
|
|
VmData is the size of private data segments.
It has the same meaning as in Linux.
Change-Id: Iebf1ae85940a810524a6cde9c2e767d4233ddb2a
PiperOrigin-RevId: 250593739
|
|
Updates #220
PiperOrigin-RevId: 250532302
|
|
The root mount is an overlay mount.
PiperOrigin-RevId: 250429317
|
|
PiperOrigin-RevId: 250426407
|
|
After bf959931ddb88c4e4366e96dd22e68fa0db9527c ("wait/ptrace: assume
__WALL if the child is traced") (Linux 4.7), tracees are always eligible
for waiting, regardless of type.
PiperOrigin-RevId: 250399527
|
|
PiperOrigin-RevId: 250329795
|
|
Updates #234
PiperOrigin-RevId: 250323553
|
|
PiperOrigin-RevId: 249929942
|
|
The original bug is no longer relevant, and the FIXME here
contains lots of obsolete information.
PiperOrigin-RevId: 249924036
|
|
We don't need to model internal interfaces after the system
call interfaces (which are objectively worse and simply use a
flag to distinguish between two logically different operations).
PiperOrigin-RevId: 249916814
Change-Id: I45d02e0ec0be66b782a685b1f305ea027694cab9
|
|
PiperOrigin-RevId: 249888234
Change-Id: Icfef32c3ed34809c34100c07e93e9581c786776e
|
|
Allows socket tests that rely on test_util to compile on Fuchsia.
PiperOrigin-RevId: 249884084
Change-Id: I17617e3f1baaba4c85c689f40db4a42a8de1597e
|
|
These wakers are uselessly allocated and passed around; nothing ever
listens for notifications on them. The code here appears to be
vestigial, so removing it and allowing a nil waker to be passed seems
appropriate.
PiperOrigin-RevId: 249879320
Change-Id: Icd209fb77cc0dd4e5c49d7a9f2adc32bf88b4b71
|
|
sendfile can be called for a big range and it can require significant
amount of time to process it, so we need to handle task interrupts in
this system call.
PiperOrigin-RevId: 249781023
Change-Id: Ifc2ec505d74c06f5ee76f93b8d30d518ec2d4015
|
