Age | Commit message (Collapse) | Author |
|
PiperOrigin-RevId: 262242410
|
|
PiperOrigin-RevId: 262226761
|
|
- This also gets rid of pipes for now because pipe does not have vfs2 specific
support yet.
- Added file path resolution logic.
- Fixes testing infrastructure.
- Does not include unit tests yet.
PiperOrigin-RevId: 262213950
|
|
Updates #512
PiperOrigin-RevId: 262195448
|
|
PiperOrigin-RevId: 262163794
|
|
PiperOrigin-RevId: 262071646
|
|
This can happen because endpoint.Close() closes the accept channel first and
then drains/resets any accepted but not delivered connections. But there can be
connections that are connected but not delivered to the channel as the channel
was full. But closing the channel can cause these writes to fail with a write to
a closed channel.
The correct solution is to abort any connections in SYN-RCVD state and
drain/abort all completed connections before closing the accept channel.
PiperOrigin-RevId: 261951132
|
|
If there is an offset, the file must support pread/pwrite. See
fs/splice.c:do_splice.
PiperOrigin-RevId: 261944932
|
|
After the refactoring of the proctor binaries, the Dockerfiles for each
language must be altered to copy the common folder into their image.
Additionally, Java has been changed to use the pre-built version of
JDK-11 from Ubuntu, instead of building it from the source. This allows
for a smaller image and faster test execution within the container.
PiperOrigin-RevId: 261805158
|
|
This change adds functionality for running more languages using
the runtimes test suite. It divides the languages into separate
test functions, which each call the helper testLang function in the
runtimes_test.go file. This allows them to be run individually
or as a group.
PiperOrigin-RevId: 261791935
|
|
This was done in commit 04cbb13ce9b151cf906f42e3f18ce3a875f01f63
PiperOrigin-RevId: 261414748
|
|
PiperOrigin-RevId: 261413396
|
|
(Don't worry, this is mostly tests.)
Implemented the following ioctls:
- TIOCSCTTY - set controlling TTY
- TIOCNOTTY - remove controlling tty, maybe signal some other processes
- TIOCGPGRP - get foreground process group. Also enables tcgetpgrp().
- TIOCSPGRP - set foreground process group. Also enabled tcsetpgrp().
Next steps are to actually turn terminal-generated control characters (e.g. C^c)
into signals to the proper process groups, and to send SIGTTOU and SIGTTIN when
appropriate.
PiperOrigin-RevId: 261387276
|
|
Each gofer now has a goroutine that polls on the FDs used
to communicate with the sandbox. The respective gofer is
destroyed if any of the FDs is closed.
Closes #601
PiperOrigin-RevId: 261383725
|
|
PiperOrigin-RevId: 261373749
|
|
We can get the mount namespace from the CreateProcessArgs in all cases where we
need it. This also gets rid of kernel.Destroy method, since the only thing it
was doing was DecRefing the mounts.
Removing the need to call kernel.SetRootMountNamespace also allowed for some
more simplifications in the container fs setup code.
PiperOrigin-RevId: 261357060
|
|
This change removes the filepath.Walk() function from
proctor- go, php, and nodejs. The filepath.Walk() is
now defined in common.go in Search(). Each proctor binary
passes root directory and testFilter arguments to Search().
proctor-python.go no longer uses filepath.Walk() to search
for tests. There is a built-in list test function within
python's language test suite so that is being used instead.
PiperOrigin-RevId: 261242897
|
|
Set /proc/self/oom_score_adj based on oomScoreAdj specified in the OCI bundle.
When new containers are added to the sandbox oom_score_adj for the sandbox and
all other gofers are adjusted so that oom_score_adj is equal to the lowest
oom_score_adj of all containers in the sandbox.
Fixes #512
PiperOrigin-RevId: 261242725
|
|
PiperOrigin-RevId: 261203674
|
|
This is the source of many warnings like:
AtomicRefCount 0x7f5ff84e3500 owned by "fs.Inode" garbage collected with ref count of 1 (want 0)
PiperOrigin-RevId: 261197093
|
|
Export some readily-available fields for TCP_INFO and stub out the rest.
PiperOrigin-RevId: 261191548
|
|
Implements support for RTM_GETROUTE requests for netlink sockets.
Fixes #507
PiperOrigin-RevId: 261051045
|
|
proctor-go had a bug where it would incorrectly identify
a tool test as a disk test. Instead of searching for the
test on disk as the identification method, we now check if
the test name ends in ".go". If the test ends in ".go" it
is run as a disk test, otherwise the test is run as a tool test.
Python tests need to be run from within the directory they exist.
Functionality to split the test name from it's parent directory
has been added and a cmd.Dir argument has been set.
PiperOrigin-RevId: 261021693
|
|
Note that some of these changes affect the protocol in
backward-incompatible ways.
- Replace use of "initially-active" and "initially-inactive" with
"client" and "server" respectively for clarity.
- Fix a race condition involving Endpoint.Shutdown() by repeatedly
invoking FUTEX_WAKE until it is confirmed that no local thread is
blocked in FUTEX_WAIT.
- Drop flipcall.ControlMode.
PiperOrigin-RevId: 260981382
|
|
This is initialized lazily on the first unimplemented
syscall. Without the sync.Once, this is racy.
PiperOrigin-RevId: 260971758
|
|
Shared code among proctor-*.go files has been refactored
into common/common.go. The common package is imported in
each proctor binary and a struct is created to implement
the testRunner interface defined in common.go. This allows
for the proctor binaries to be updated without having to
copy/paste the same code across all files. There are no
usage or functionality changes.
PiperOrigin-RevId: 260967080
|
|
The checksum was not being reset before being re-calculated and sent out.
This caused the sent checksum to always be `0x0800`.
Fixes #605.
PiperOrigin-RevId: 260965059
|
|
This doesn't currently pass on gVisor.
While I'm here, fix a bug where connecting to the v6-mapped v4 address doesn't
work in gVisor.
PiperOrigin-RevId: 260923961
|
|
PiperOrigin-RevId: 260851452
|
|
It gets rid of holding state of the io.Reader offset (which is anyways held by
the vfs.FileDescriptor struct. It is also odd using a io.Reader becuase we
using io.ReaderAt to interact with the device. So making a io.ReaderAt wrapper
makes more sense.
Most importantly, it gets rid of the complexity of extracting the file reader
from a regular file implementation and then using it. Now we can just use the
regular file implementation as a reader which is more intuitive.
PiperOrigin-RevId: 260846927
|
|
Also adds stress tests for block map reader and intensifies extent reader tests.
PiperOrigin-RevId: 260838177
|
|
PiperOrigin-RevId: 260824989
|
|
PiperOrigin-RevId: 260803517
|
|
PiperOrigin-RevId: 260783254
|
|
Adds feature to launch from an open host FD instead of a binary_path.
The FD should point to a valid executable and most likely be statically
compiled. If the executable is not statically compiled, the loader will
search along the interpreter paths, which must be able to be resolved in
the Sandbox's file system or start will fail.
PiperOrigin-RevId: 260756825
|
|
syscall.POLL is not supported on arm64, using syscall.PPOLL
to support both the x86 and arm64. refs #63
Signed-off-by: Haibo Xu <haibo.xu@arm.com>
Change-Id: I2c81a063d3ec4e7e6b38fe62f17a0924977f505e
COPYBARA_INTEGRATE_REVIEW=https://github.com/google/gvisor/pull/543 from xiaobo55x:master ba598263fd3748d1addd48e4194080aa12085164
PiperOrigin-RevId: 260752049
|
|
This provides the following benefits:
- We can now use pkg/fd package which does not take ownership
of the file descriptor. So it does not close the fd when garbage collected.
This reduces scope of errors from unexpected garbage collection of io.File.
- It enforces the offset parameter in every read call.
It does not affect the fd offset nor is it affected by it. Hence reducing
scope of error of using stale offsets when reading.
- We do not need to serialize the usage of any global file descriptor anymore.
So this drops the mutual exclusion req hence reducing complexity and
congestion.
PiperOrigin-RevId: 260635174
|
|
Allocate a larger memory buffer and combine multiple copies into one copy,
to reduce the number of copies from kernel memory to user memory.
Signed-off-by: Hang Su <darcy.sh@antfin.com>
|
|
PiperOrigin-RevId: 260629559
|
|
PiperOrigin-RevId: 260624470
|
|
PiperOrigin-RevId: 260613864
|
|
This introduces two new types of Emitters:
1. MultiEmitter, which will forward events to other registered Emitters, and
2. RateLimitedEmitter, which will forward events to a wrapped Emitter, subject
to given rate limits.
The methods in the eventchannel package itself act like a multiEmitter, but is
not actually an Emitter. Now we have a DefaultEmitter, and the methods in
eventchannel simply forward calls to the DefaultEmitter.
The unimplemented syscall handler now uses a RateLimetedEmitter that wraps the
DefaultEmitter.
PiperOrigin-RevId: 260612770
|
|
This test flaked on my current CL. Linux makes no guarantee
that two inodes will consecutive (overflows happen).
https://github.com/avagin/linux-task-diag/blob/master/fs/inode.c#L880
PiperOrigin-RevId: 260608240
|
|
PiperOrigin-RevId: 260577765
|
|
Unfortunately, Linux's ip_tables.h header doesn't compile in C++ because it
implicitly converts from void* to struct xt_entry_target*. C allows this, but
C++ does not. So we have to re-implement many types ourselves.
Relevant code here:
https://github.com/torvalds/linux/blob/master/include/uapi/linux/netfilter_ipv4/ip_tables.h#L222
PiperOrigin-RevId: 260565570
|
|
PiperOrigin-RevId: 260239119
|
|
This allows published binary to be debugged if needed.
PiperOrigin-RevId: 260228367
|
|
PiperOrigin-RevId: 260220279
|
|
By following the directions in the README file, these Dockerfiles can be
built and used to run native language tests for their respective runtimes.
PiperOrigin-RevId: 260174430
|
|
PiperOrigin-RevId: 260047477
|