Age | Commit message (Collapse) | Author |
|
tcpip integration tests have been flaky lately. They usually run in 20 seconds
and have a 60 seconds timeout. Sometimes they timeout which could be due to
a bug or deadlock. To further investigate it might be helpful to split the
targets and see which test is causing the flake.
Added a new tcpip/tests/utils package to hold all common utilities across all
tests.
PiperOrigin-RevId: 358012936
|
|
We were opening dual-stack sockets, but tests only set iptables rules for a
single network protocol. Thus, packets (probably sent by previous tests) could
sneak in and break tests.
Tested with:
bazel test ///test/iptables:iptables_test
--test_arg=--runtime=runsc --nocache_test_results --test_output=errors
--runs_per_test=1000 --test_filter=TestFilterInputDropUDP
PiperOrigin-RevId: 357972385
|
|
Operations are now shut down automatically by the main Stop
command, and it is not necessary to call Stop during Destroy.
Fixes #5454
PiperOrigin-RevId: 357295930
|
|
Remove flaky tcp_reordering_test as it does not check reordering. We have
added new reorder tests in tcp_rack_test.go
PiperOrigin-RevId: 357278769
|
|
Rename operation params in iperf and tensorflow to
match other similar benchmarks.
PiperOrigin-RevId: 357250304
|
|
PiperOrigin-RevId: 357241880
|
|
Fix issue with iperf where b.N wasn't changing across runs.
Also, if the given runtime is runc/not given, don't run a profile against it.
PiperOrigin-RevId: 357231450
|
|
PiperOrigin-RevId: 357224877
|
|
This change implements TLP details enumerated in
https://tools.ietf.org/html/draft-ietf-tcpm-rack-08#section-7.5.3
Fixes #5085
PiperOrigin-RevId: 357125037
|
|
PiperOrigin-RevId: 357106080
|
|
Entry check:
- Earlier implementation was preventing us from entering recovery even if
SND.UNA is lost but dupAckCount is still below threshold. Fixed that.
- We should only enter recovery when at least one more byte of data beyond the
highest byte that was outstanding when fast retransmit was last entered is
acked. Added that check.
Exit check:
- Earlier we were checking if SEG.ACK is in range [SND.UNA, SND.NXT]. The
intention was to check if any unacknowledged data was ACKed. Note that
(SEG.ACK - 1) is actually the sequence number which was ACKed. So we were
incorrectly including (SND.UNA - 1) in the range. Fixed the check to now be
(SEG.ACK - 1) in range [SND.UNA, SND.NXT).
Additionally, moved a RACK specific test to the rack tests file.
Added tests for the changes I made.
PiperOrigin-RevId: 357091322
|
|
PiperOrigin-RevId: 357090170
|
|
Added a LINT IfChange/ThenChange check to catch this in the future.
PiperOrigin-RevId: 357077564
|
|
Implementing interfaces on value types causes the interface to be
implemented by both the value type and the pointer type of the
implementer. This complicates type assertion as it requires the
assertion to check for both the pointer type and the value type.
PiperOrigin-RevId: 357061063
|
|
PiperOrigin-RevId: 357031904
|
|
PiperOrigin-RevId: 357015186
|
|
rt_sigaction may be called by Go runtime when trying to panic:
https://cs.opensource.google/go/go/+/master:src/runtime/signal_unix.go;drc=ed3e4afa12d655a0c5606bcf3dd4e1cdadcb1476;bpv=1;bpt=1;l=780?q=rt_sigaction&ss=go
Updates #5038
PiperOrigin-RevId: 357013186
|
|
PiperOrigin-RevId: 356868412
|
|
TestRACKWithDuplicateACK is flaky as the reorder window can expire before
receiving three duplicate ACKs which will result in sending the first
unacknowledged segment twice: when reorder timer expired and again after
receiving the third duplicate ACK.
This CL will fix this behavior and will not resend the segment again if it was
already re-transmittted when reorder timer expired.
Update the TestRACKWithDuplicateACK to test that the first segment is
considered as lost and is re-transmitted.
PiperOrigin-RevId: 356855168
|
|
Linux does the same thing.
Reported-by: syzbot+6c79385c930c929d1d9e@syzkaller.appspotmail.com
PiperOrigin-RevId: 356854562
|
|
PiperOrigin-RevId: 356852625
|
|
PiperOrigin-RevId: 356843249
|
|
Deflake this test by retransmitting the ACK and retrying RST
expectation after the supposed state transition to CLOSED.
This gives time for the state transition to complete.
Without such a retransmit from the test, the ACK could get silently
dropped by the listener when the passively connecting endpoint
has not yet completely updated the state (in gVisor this would be
endpoint state and decrement of synRcvdCount).
PiperOrigin-RevId: 356825562
|
|
PiperOrigin-RevId: 356807933
|
|
PiperOrigin-RevId: 356784956
|
|
PiperOrigin-RevId: 356772367
|
|
PiperOrigin-RevId: 356762859
|
|
The limits for snd/rcv buffers for unix domain socket is controlled by the
following sysctls on linux
- net.core.rmem_default
- net.core.rmem_max
- net.core.wmem_default
- net.core.wmem_max
Today in gVisor we do not expose these sysctls but we do support setting the
equivalent in netstack via stack.Options() method. But AF_UNIX sockets in gVisor
can be used without netstack, with hostinet or even without any networking stack
at all. Which means ideally these sysctls need to live as globals in gVisor.
But rather than make this a big change for now we hardcode the limits in the
AF_UNIX implementation itself (which in itself is better than where we were
before) where it SO_SNDBUF was hardcoded to 16KiB. Further we bump the initial
limit to a default value of 208 KiB to match linux from the paltry 16 KiB we use
today.
Updates #5132
PiperOrigin-RevId: 356665498
|
|
The test will sometimes fail on Bind calls using the old RPCTimeout.
PiperOrigin-RevId: 356646668
|
|
PiperOrigin-RevId: 356645022
|
|
PiperOrigin-RevId: 356624256
|
|
PiperOrigin-RevId: 356587965
|
|
Utilities written to be common across IPv4/IPv6 are not planned to be
available for public use.
https://golang.org/doc/go1.4#internalpackages
PiperOrigin-RevId: 356554862
|
|
... as per RFC 7048. The Failed state is an internal state that is not
specified by any RFC; replacing it with the Unreachable state enables us to
expose this state while keeping our terminology consistent with RFC 4861 and
RFC 7048.
Unreachable state replaces all internal references for Failed state. However
unlike the Failed state, change events are dispatched when moving into
Unreachable state. This gives developers insight into whether a neighbor entry
failed address resolution or whether it was explicitly removed.
The Failed state will be removed entirely once all references to it are
removed. This is done to avoid a Fuchsia roll failure.
Updates #4667
PiperOrigin-RevId: 356554104
|
|
PiperOrigin-RevId: 356536548
|
|
Reported-by: syzbot+9ffc71246fe72c73fc25@syzkaller.appspotmail.com
PiperOrigin-RevId: 356536113
|
|
PiperOrigin-RevId: 356450303
|
|
IPv4 forwarding and reassembly needs support for option processing
and regular processing also needs options to be processed before
being passed to the transport layer. This patch extends option processing
to those cases and provides additional testing. A small change to the ICMP
error generation API code was required to allow it to know when a packet was
being forwarded or not.
Updates #4586
PiperOrigin-RevId: 356446681
|
|
The thing the lock protects will never be accessed concurrently.
PiperOrigin-RevId: 356423331
|
|
We previously return EINVAL when connecting to port 0, however this is not the
observed behavior on Linux. One of the observable effects after connecting to
port 0 on Linux is that getpeername() will fail with ENOTCONN.
PiperOrigin-RevId: 356413451
|
|
Reported-by: syzbot+d54bc27a15aefe52c330@syzkaller.appspotmail.com
PiperOrigin-RevId: 356406975
|
|
...as long as the network protocol supports duplicate address detection.
This CL provides the facilities for a netstack integrator to perform
DAD.
DHCP recommends that clients effectively perform DAD before accepting an
offer. As per RFC 2131 section 4.4.1 pg 38,
The client SHOULD perform a check on the suggested address to ensure
that the address is not already in use. For example, if the client
is on a network that supports ARP, the client may issue an ARP request
for the suggested request.
The implementation of ARP-based IPv4 DAD effectively operates the same
as IPv6's NDP DAD - using ARP requests and responses in place of
NDP neighbour solicitations and advertisements, respectively.
DAD performed by calls to (*Stack).CheckDuplicateAddress don't interfere
with DAD performed when a new IPv6 address is added. This is so that
integrator requests to check for duplicate addresses aren't unexpectedly
aborted when addresses are removed.
A network package internal package provides protocol agnostic DAD state
management that specific protocols that provide DAD can use.
Fixes #4550.
Tests:
- internal/ip_test.*
- integration_test.TestDAD
- arp_test.TestDADARPRequestPacket
- ipv6.TestCheckDuplicateAddress
PiperOrigin-RevId: 356405593
|
|
This makes it easier to implement dynamically sized types in go-marshal. You
really only need to implement MarshalBytes, UnmarshalBytes and SizeBytes to
implement the entire interface.
By using the `dynamic` tag, the autogenerator will generate the rest of the
methods for us.
This change also simplifies how KernelIPTGetEntries implements Marshallable
using the newly added utility.
PiperOrigin-RevId: 356397114
|
|
Fixes a bug in our getsockopt(2) implementation which was incorrectly using
binary.Size() instead of Marshallable.SizeBytes().
PiperOrigin-RevId: 356396551
|
|
Detect packet loss using reorder window and re-transmit them after the reorder
timer expires.
PiperOrigin-RevId: 356321786
|
|
It was replaced by NUD/neighborCache.
Fixes #4658.
PiperOrigin-RevId: 356085221
|
|
Before this change, packets were delivered asynchronously to the remote
end of a pipe. This was to avoid a deadlock during link resolution where
the stack would attempt to double-lock a mutex (see removed comments in
the parent commit for details).
As of https://github.com/google/gvisor/commit/4943347137, we do not hold
locks while sending link resolution probes so the deadlock will no
longer occur.
PiperOrigin-RevId: 356066224
|
|
Previously when sending NDP DAD or RS messages, we would hold a shared
lock which lead to deadlocks (due to synchronous packet loooping
(e.g. pipe and loopback link endpoints)) and lock contention.
Writing packets may be an expensive operation which could prevent other
goroutines from doing meaningful work if a shared lock is held while
writing packets.
This change upates the NDP DAD/RS timers to not hold shared locks while
sending packets.
PiperOrigin-RevId: 356053146
|
|
The network endpoints only look for other network endpoints of the
same kind. Since the network protocols keeps track of all endpoints,
go through the protocol to find an endpoint with an address instead
of the stack.
PiperOrigin-RevId: 356051498
|
|
Previously when sending probe messages, we would hold a shared lock
which lead to deadlocks (due to synchronous packet loooping (e.g. pipe
and loopback link endpoints)) and lock contention.
Writing packets may be an expensive operation which could prevent other
goroutines from doing meaningful work if a shared lock is held while
writing packets.
This change upates the NUD timers to not hold shared locks while
sending packets.
PiperOrigin-RevId: 356048697
|